目次

NIST IR 7806 日本語訳

英語タイトル : ANSI/NIST-ITL 1-2011 Requirements and Conformance Test Assertions
日本語タイトル : ANSI/NIST-ITL 1-2011 の要件および適合性試験アサーション
公開日 : 2011-09-16
原文URL : https://csrc.nist.gov/pubs/ir/7806/final
翻訳編集 : 自動生成(有志による非公式の日本語訳), 原文取得日 : 2026-10-31, 訳文 : 392 / 393 ブロック

[要約] NIST IR 7806 は、ANSI/NIST-ITL 1-2011(AN-2011)の要件と、その実装を試験するための適合性試験アサーションを示す報告書です。NIST/ITL のコンピュータセキュリティ部門(CSD)は、選択したレコードタイプについて実装を試験する適合性試験ツールの開発を支援するため、新しい ANSI/NIST-ITL 標準の第 4 版ドラフトで規定された要件に基づき、1,200 を超える試験アサーションを特定して一連の表にまとめました。表は、AN-2011 標準向けの適合性試験方法論(CTM)を策定するために NIST/ITL が設立したワーキンググループに提供されました。本書は、策定したアサーションと、その定義に用いる用語、オペランド、演算子を記載し、NIST/ITL CSD における適合性試験ツール開発の経緯も簡単に説明しています。

NISTIR 7806

NISTIR 7806

ANSI/NIST-ITL 1-2011 Requirements and Conformance Test Assertions

ANSI/NIST-ITL 1-2011 の要件および適合性試験アサーション

Christofer J. McGinnis
Dylan Yaga
Fernando L. Podio

Christofer J. McGinnis
Dylan Yaga
Fernando L. Podio

図表
[NIST logo — not reproduced on this unofficial site]

[NIST のロゴ。公的な標章のため、この非公式サイトには掲載していません。原本 PDF を参照してください。]

NISTIR 7806

NISTIR 7806

ANSI/NIST-ITL 1-2011 Requirements and Conformance Test Assertions

ANSI/NIST-ITL 1-2011 の要件および適合性試験アサーション

Christofer J. McGinnis
Dylan Yaga
Fernando L. Podio

Christofer J. McGinnis
Dylan Yaga
Fernando L. Podio

September 2011

2011 年 9 月

U.S. Department of Commerce
Rebecca M. Blank, Acting Secretary

米国商務省
Rebecca M. Blank 長官代行

National Institute of Standards and Technology
Patrick D. Gallagher, Under Secretary for Standards and Technology and Director

国立標準技術研究所
Patrick D. Gallagher、標準・技術担当商務次官兼所長

Reports on Computer Systems Technology

コンピュータシステム技術に関する報告書

The Information Technology Laboratory (ITL) at the National Institute of Standards and Technology (NIST) promotes the U.S. economy and public welfare by providing technical leadership for the Nation’s measurement and standards infrastructure. ITL develops tests, test methods, reference data, proof of concept implementations, and technical analysis to advance the development and productive use of information technology. ITL’s responsibilities include the development of technical, physical, administrative, and management standards and guidelines for the cost-effective security and privacy of sensitive unclassified information in Federal computer systems. This Interagency Report discusses ITL’s research, guidance, and outreach efforts in computer security, and its collaborative activities with industry, government, and academic organizations.

米国国立標準技術研究所(NIST)の情報技術研究所(ITL)は、米国の測定・標準基盤に技術的リーダーシップを提供することにより、米国の経済と公共の福祉を促進しています。ITL は、情報技術の発展と生産的な利用を進めるため、試験、試験方法、参照データ、概念実証の実装、および技術分析を開発しています。ITL の責務には、連邦コンピュータシステムにおける機密扱いではない機微情報のセキュリティとプライバシーを費用対効果よく確保するための、技術的、物理的、管理的、および経営管理上の標準とガイドラインの策定が含まれます。この省庁間報告書は、コンピュータセキュリティに関する ITL の研究、ガイダンス、普及活動と、産業界、政府、学術機関との共同活動について述べています。

National Institute of Standards and Technology Interagency Report
175 pages (2011)

米国国立標準技術研究所 省庁間報告書
175 ページ(2011 年)

Certain commercial entities, equipment, or materials may be identified in this document in order to describe an experimental procedure or concept adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that the entities, materials, or equipment are necessarily the best available for the purpose.

本書では、実験の手順や概念を適切に説明するために、特定の商業的主体、機器、または資材を挙げている場合があります。こうした記載は、米国国立標準技術研究所による推奨や支持を意味するものではなく、それらの主体、資材、または機器が目的にとって必ずしも最良であることを意味するものでもありません。

Abstract

要旨

The current version of the ANSI/NIST-ITL standard "Data Format for the Interchange of Fingerprint, Facial & Other Biometric Information" is specified in two parts. Part 1, ANSI/NIST-ITL 1-2007, specifies the traditional format, and Part 2, ANSI/NIST-ITL 2-2008, specifies a NIEM-conformant XML format. Both parts have been combined into one document, which is being revised and augmented. The Computer Security Division (CSD) of NIST/ITL has developed a set of test assertions based on the requirements specified in the 4th draft of the new ANSI/NIST-ITL standard. Over twelve hundred test assertions have been identified and organized into a set of tables to assist in the development of a conformance test tool designed to test implementations of the new version of the ANSI/NIST-ITL standard for selected record types. These tables were contributed to the Conformance Testing Methodology (CTM) Working Group which was recently established by NIST/ITL to develop a CTM for the new version of the ANSI/NIST-ITL (AN-2011) standard. A ballot was conducted on a revised draft (5th draft) of the AN-2011 standard. A new draft will be developed based on the comments received as a result of this ballot. As the technical content of the AN-2011 draft standard evolves towards approval and publication, and comments on the assertion tables in this document are received, revised versions of these tables will be developed until they fully address the requirements of the approved AN-2011 standard. This publication documents the assertions developed and the terms, operands, and operators used in defining these assertions. Brief information on previous and ongoing conformance test tools development within NIST/ITL CSD is included.

標準 ANSI/NIST-ITL「Data Format for the Interchange of Fingerprint, Facial & Other Biometric Information」の現行版は、2 つのパートで規定されています。パート 1 の ANSI/NIST-ITL 1-2007 は Traditional 形式を規定し、パート 2 の ANSI/NIST-ITL 2-2008 は NIEM 準拠の XML 形式を規定しています。両パートは 1 つの文書にまとめられ、改訂と拡充が行われています。NIST/ITL のコンピュータセキュリティ部門(CSD)は、新しい ANSI/NIST-ITL 標準の第 4 ドラフトで規定された要件に基づく一連の試験アサーションを策定しました。1,200 を超える試験アサーションを特定し、一連の表にまとめました。これらは、選択したレコードタイプについて、新版の ANSI/NIST-ITL 標準の実装を試験するために設計された適合性試験ツールの開発を支援するためのものです。これらの表は、新版の ANSI/NIST-ITL(AN-2011)標準向けの CTM を策定するために NIST/ITL が最近設立した適合性試験方法論(CTM)ワーキンググループに提供されました。AN-2011 標準の改訂ドラフト(第 5 ドラフト)について投票が行われました。この投票の結果として寄せられたコメントに基づいて、新しいドラフトが作成される予定です。AN-2011 ドラフト標準の技術的内容が承認と発行に向けて進展し、本書のアサーション表に対するコメントが寄せられるのに応じて、承認された AN-2011 標準の要件を十分に満たすまで、これらの表の改訂版が作成されます。本書は、策定したアサーションと、これらのアサーションの定義に用いる用語、オペランド、および演算子を記載しています。NIST/ITL CSD 内における、これまでの、および現在進行中の適合性試験ツール開発に関する簡単な情報も含まれています。

Disclaimer

免責事項

Statements made in this paper should not be interpreted as standards, guidelines, best practices, or recommendations for specific changes to any other NIST publications.

本書の記述を、標準、ガイドライン、ベストプラクティス、あるいはほかの NIST 刊行物への特定の変更に関する推奨として解釈してはなりません。

Sponsor

スポンサー

The work described in this document was sponsored, in part, by The Department of Homeland Security/US-VISIT Program.

本書に記載した作業は、国土安全保障省(DHS)の US-VISIT プログラムが一部を支援しました。

Table of Contents

目次

List of Tables

表の一覧

1 Introduction

1 はじめに

1.1 Background

1.1 背景

The ANSI/NIST-ITL standard "Data Format for the Interchange of Fingerprint, Facial & Other Biometric Information" is used by law enforcement, intelligence, military, and homeland security organizations throughout the world. The current version of the ANSI/NIST-ITL standard is specified in two parts:

標準 ANSI/NIST-ITL「Data Format for the Interchange of Fingerprint, Facial & Other Biometric Information」は、世界中の法執行、情報、軍事、および国土安全保障の各機関で用いられています。ANSI/NIST-ITL 標準の現行版は、2 つのパートで規定されています。

Part 1 – (ANSI/NIST-ITL 1-2007) in Traditional Format [1]

パート 1 – (ANSI/NIST-ITL 1-2007)Traditional 形式 [1]

Part 2 – (ANSI/NIST-ITL 2-2008) in NIEM-conformant XML format [2]

パート 2 – (ANSI/NIST-ITL 2-2008)NIEM 準拠の XML 形式 [2]

In addition, an extension to the table of finger position codes in both parts of the standard to handle multiple-finger captures was published: ANSI/NIST-ITL 1a-2009 [3].

このほか、複数指の採取に対応するため、標準の両パートの指位置コードの表を拡張するものとして、ANSI/NIST-ITL 1a-2009 [3] が発行されています。

The standard is now in the process of being revised. Four drafts were developed as a result of two workshops that were held at NIST and comments received from subsequent drafts. A final voting version (5th draft) was developed [4]. A forty-five day ballot on the 5th draft closed August 31. A revised draft will be developed as a result of the ballot. Additional information on the standard and related activities can be found at the ANSI/NIST-ITL standard homepage [5].

この標準は現在、改訂の途上にあります。NIST で開催された 2 回のワークショップと、その後のドラフトに対して寄せられたコメントを受けて、4 つのドラフトが作成されました。最終投票版(第 5 ドラフト)が作成されました [4]。第 5 ドラフトに対する 45 日間の投票は 8 月 31 日に終了しました。投票の結果、改訂ドラフトが作成されます。この標準と関連する活動についての追加情報は、ANSI/NIST-ITL 標準のホームページ [5] で入手できます。

1.2 Need for Conformance Testing to Biometric Standards

1.2 生体認証標準に対する適合性試験の必要性

The existence of biometric standards alone is not enough to demonstrate that products meet the technical requirements specified in the standards. Conformance testing captures the technical description of a specification and measures whether an implementation faithfully implements the specification. Conformance testing provides developers, users, and purchasers with increased levels of confidence in product quality and increases the probability of successful interoperability.

生体認証標準が存在するだけでは、製品が標準で規定された技術要件を満たすことを示すには不十分です。適合性試験は、仕様の技術的な記述を捉え、実装がその仕様を忠実に実装しているかどうかを測定します。適合性試験は、開発者、利用者、および購入者に対して製品品質への信頼度を高め、相互運用に成功する確率を高めます。

The Computer Security Division (CSD) of NIST/ITL supports the development of biometric conformance testing methodology standards and other conformity assessment efforts through active technical participation in the development of biometric standards and the development of associated conformance test architectures and test suites.

NIST/ITL のコンピュータセキュリティ部門(CSD)は、生体認証標準の策定への積極的な技術的参加と、関連する適合性試験アーキテクチャおよび試験スイートの開発を通じて、生体認証の適合性試験方法論標準の策定とその他の適合性評価の取り組みを支援しています。

1.3 NIST/ITL CSD Conformance Test Tools Developments

1.3 NIST/ITL CSD の適合性試験ツールの開発

NIST/ITL CSD develops these conformance test tools to support users that require conformance to selected biometric standards and product developers interested in conforming to biometric standards by using the same testing tools available to users. These efforts support the possible establishment of conformity assessment programs to validate conformance to biometric standards. The following sections briefly describe previous, recent, and ongoing conformance test tool developments in support of biometric standards.

NIST/ITL CSD は、選択した生体認証標準への適合を必要とする利用者と、利用者が使えるものと同じ試験ツールを用いて生体認証標準への適合を図ろうとする製品開発者を支援するために、これらの適合性試験ツールを開発しています。これらの取り組みは、生体認証標準への適合を検証する適合性評価プログラムの設立の可能性を支えるものです。以下の各節では、生体認証標準を支援するための、過去、最近、および現在進行中の適合性試験ツールの開発を簡単に説明します。

1.4 BioAPI Conformance Test Suite (CTS)

1.4 BioAPI 適合性試験スイート(CTS)

In February 2006, NIST/ITL CSD released a BioAPI Conformance Test Suite (CTS) developed to test implementations of ANSI INCITS 358-2002, the BioAPI specification. This software tool was developed to help users verify the conformance of Biometric Service Providers to the BioAPI Specification 1.1. This tool can be downloaded from the BioAPI Conformance Test Suite web page [6]. The InterNational Committee for Information Technology Standards (INCITS) Technical Committee M1- Biometrics developed a conformance testing methodology standard for this BioAPI specification. The standard was published in 2008 as ANSI INCITS 429-2008 [7]. NIST/ITL CSD co-sponsored the development of this standard.

2006 年 2 月、NIST/ITL CSD は、BioAPI 仕様である ANSI INCITS 358-2002 の実装を試験するために開発した BioAPI 適合性試験スイート(CTS)を公開しました。このソフトウェアツールは、生体認証サービスプロバイダーが BioAPI Specification 1.1 に適合しているかどうかを利用者が検証するのを助けるために開発されました。このツールは、BioAPI Conformance Test Suite のウェブページ [6] からダウンロードできます。情報技術標準国際委員会(INCITS)の技術委員会 M1 - Biometrics は、この BioAPI 仕様のための適合性試験方法論標準を策定しました。この標準は 2008 年に ANSI INCITS 429-2008 [7] として発行されました。NIST/ITL CSD は、この標準の策定を共同で支援しました。

1.5 Conformance Test Architecture for Biometric Information Records – Beta 1.1

1.5 生体情報レコード向け適合性試験アーキテクチャ – Beta 1.1

In August 2008, NIST/ITL CSD released a Conformance Test Architecture (CTA) for Biometric Information Records and a Conformance Test Suite (CTS) for Patron Format A data structures specified in ANSI INCITS 398-2008, “Common Biometric Exchange Formats Framework” that runs under this CTA. The CTS for Patron Format A supported by this conformance testing architecture was developed to help users determine whether binary file implementations of Biometric Information Records (BIRs) based on this Patron Format conform to the standard. NIST/ITL CSD sponsored (in INCITS M1) development of a conformance testing methodology standard for CBEFF (Common Biometric Exchange Format Framework) data structures specified in ANSI INCITS 398-2008 and submitted to INCITS M1 the test assertions and related test cases developed for the Patron Format A CTS as well as test assertions and test cases for other Patron Formats specified in the ANSI INCITS 398-2008 standard. This standard was published as ANSI INCITS 473 in 2011 [8].

2008 年 8 月、NIST/ITL CSD は、生体情報レコード向けの適合性試験アーキテクチャ(CTA)と、この CTA の下で動作する、ANSI INCITS 398-2008「Common Biometric Exchange Formats Framework」で規定された Patron Format A のデータ構造向けの適合性試験スイート(CTS)を公開しました。この適合性試験アーキテクチャがサポートする Patron Format A 向けの CTS は、この Patron Format に基づく生体情報レコード(BIR)のバイナリファイル実装が標準に適合しているかどうかを、利用者が判断するのを助けるために開発されました。NIST/ITL CSD は、ANSI INCITS 398-2008 で規定された CBEFF(Common Biometric Exchange Format Framework)データ構造のための適合性試験方法論標準の策定を(INCITS M1 において)支援し、Patron Format A の CTS 向けに開発した試験アサーションと関連する試験ケース、ならびに ANSI INCITS 398-2008 標準で規定された他の Patron Format の試験アサーションと試験ケースを INCITS M1 に提出しました。この標準は 2011 年に ANSI INCITS 473 [8] として発行されました。

1.6 Advanced Conformance Test Architecture (CTA) Beta 2.0

1.6 高度な適合性試験アーキテクチャ(CTA)Beta 2.0

In August 2010, NIST/ITL CSD released an advanced Conformance Test Architecture (CTA) Beta 2.0 designed to test implementations of selected national and international biometric data interchange standards. The CTA released was accompanied by the release of four Conformance Test Suites designed to test implementations of finger minutiae and finger image data formats conforming to American National Standards developed by Technical Committee M1- Biometrics [9]. These test tools, designed to test implementations of ANSI INCITS 378, “Finger Minutiae Format for Data Interchange” and ANSI INCITS 381, “Finger Image-Based Data Interchange Format” (both for the 2004 and 2009 versions), are available from the NIST/ITL CSD conformance test tools download web page [10].

2010 年 8 月、NIST/ITL CSD は、選択した国内および国際の生体データ交換標準の実装を試験するために設計された、高度な適合性試験アーキテクチャ(CTA)Beta 2.0 を公開しました。公開された CTA には、技術委員会 M1 - Biometrics が策定した米国国家規格に適合する指紋のマニューシャおよび指紋画像のデータ形式の実装を試験するために設計された 4 つの適合性試験スイートが付属していました [9]。ANSI INCITS 378「Finger Minutiae Format for Data Interchange」と ANSI INCITS 381「Finger Image-Based Data Interchange Format」(いずれも 2004 年版と 2009 年版)の実装を試験するために設計されたこれらの試験ツールは、NIST/ITL CSD の適合性試験ツールのダウンロード用ウェブページ [10] から入手できます。

A subsequent release of a Conformance Test Suite in 2011 is a tool designed to test implementations of the second generation of the iris image data interchange format developed by Joint Technical Committee 1 of ISO and IEC Subcommittee 37 (JTC 1/SC 37) – Biometrics [11]. Two versions of this test tool are available at the NIST/ITL CSD conformance test tools download web page [10]; they are an Installer version that runs under NIST/ITL CSD CTA Beta 2.0 and the source code version. These tools were released as soon as the final draft of this international standard became technically stable. At the time of this writing the Final Draft International Standard (FDIS) ballot closed on July 27, 2011 and the FDIS was approved. The standard is not yet published.

2011 年に公開された適合性試験スイートは、ISO と IEC の合同技術委員会 1 の分科委員会 37(JTC 1/SC 37)– Biometrics が策定した、虹彩画像データ交換形式の第 2 世代の実装を試験するために設計されたツールです [11]。この試験ツールには 2 つの版があり、NIST/ITL CSD の適合性試験ツールのダウンロード用ウェブページ [10] で入手できます。NIST/ITL CSD の CTA Beta 2.0 の下で動作するインストーラー版と、ソースコード版です。これらのツールは、この国際標準の最終ドラフトが技術的に安定した時点ですぐに公開されました。本書の執筆時点では、最終国際規格案(FDIS)の投票は 2011 年 7 月 27 日に終了し、FDIS は承認されました。この標準はまだ発行されていません。

CTSs designed to test implementations of other international data formats developed in JTC 1/SC 37 are being tested before their release and others are under development. In addition, as addressed in the following sections, NIST/ITL CSD is also supporting the ANSI/NIST ITL standards by developing conformance test tools to test implementations of both the current version (2007) and the new version under development.

JTC 1/SC 37 で策定された他の国際データ形式の実装を試験するために設計された CTS は、公開前の試験が行われており、さらに他のものが開発中です。加えて、以下の各節で述べるとおり、NIST/ITL CSD は、現行版(2007 年版)と開発中の新版の両方の実装を試験する適合性試験ツールを開発することにより、ANSI/NIST ITL 標準も支援しています。

1.7 Support for the ANSI/NIST- ITL 1-2007 Standard

1.7 ANSI/NIST-ITL 1-2007 標準のサポート

Although a revised and augmented version of the standard is under development, the 2007 version is still widely used. NIST/ITL CSD developed a CTA/CTS (Beta version 0.4) designed to test implementations of selected Record Types of ANSI/NIST-ITL 1-2007, “Data Format for the Interchange of Fingerprint, Facial, & Other Biometric Information – Part 1”. These Record Types were considered the first-priority tier and are supported:

改訂・拡充版の標準は開発中ですが、2007 年版は現在も広く使われています。NIST/ITL CSD は、ANSI/NIST-ITL 1-2007「Data Format for the Interchange of Fingerprint, Facial, & Other Biometric Information – Part 1」の選択したレコードタイプの実装を試験するために設計された CTA/CTS(Beta 版 0.4)を開発しました。次のレコードタイプは第 1 優先の階層と位置づけられ、サポートされています。

•Record Type 1, Transaction Information Record

•レコードタイプ 1、取引情報レコード

•Record Type 4, High-resolution grayscale fingerprint image

•レコードタイプ 4、高解像度グレースケール指紋画像

•Record Type 10, Facial and SMT image

•レコードタイプ 10、顔および SMT 画像

•Record Type 13, Variable-resolution latent image

•レコードタイプ 13、可変解像度の遺留画像

•Record Type 14, Variable-resolution fingerprint image

•レコードタイプ 14、可変解像度の指紋画像

•Record Type 17, Iris image.

•レコードタイプ 17、虹彩画像。

Over five-hundred and thirty test assertions were implemented. The software code can be extended to support other record types as required. The conformance test tool developed to support this standard is designed to detail a transaction’s level of conformance to the standard. The CTA/CTS can also be used as an analysis tool for determining which parts of the transaction (e.g., non-conformant fields, records) do not conform to the standard and to analyze the reason for their nonconformance. For unsupported Record Types only the length of the record is reported during testing, and no determination of conformance is made for these records. In addition to stating whether a file passes or fails, the messages provided include warnings and notes. The code was developed in C# under the Microsoft® .NET 4.0 Framework. Two versions of the tools are available to the public: (a) an Installer version (Beta 0.4) and (b) the source code. Both versions were released in May 2011 and are available at the same NIST/ITL CSD conformance test tools download web page [10]. NISTIR 7791, “Conformance Test Architecture and Test Suite for ANSI/NIST-ITL 1-2007” [12], includes a high-level overview of the architecture and test suite as well as software details. The code structure description is provided. A quick start user guide and a comprehensive table of the standard’s requirements and the associated implemented conformance test assertions are included.

530 を超える試験アサーションが実装されました。ソフトウェアコードは、必要に応じて他のレコードタイプをサポートするよう拡張できます。この標準をサポートするために開発された適合性試験ツールは、取引が標準にどの程度適合しているかを詳細に示すように設計されています。CTA/CTS は、取引のどの部分(たとえば、適合しないフィールドやレコード)が標準に適合していないかを判定し、その不適合の理由を分析するための分析ツールとしても使えます。サポートされていないレコードタイプについては、試験中にレコードの長さだけが報告され、これらのレコードについて適合の判定は行われません。ファイルが合格か不合格かを示すことに加えて、提供されるメッセージには警告と注記が含まれます。コードは、Microsoft® .NET 4.0 Framework 上の C# で開発されました。このツールは、(a) インストーラー版(Beta 0.4)と (b) ソースコードの 2 つの版が一般に公開されています。どちらの版も 2011 年 5 月に公開され、同じ NIST/ITL CSD の適合性試験ツールのダウンロード用ウェブページ [10] で入手できます。NISTIR 7791「Conformance Test Architecture and Test Suite for ANSI/NIST-ITL 1-2007」[12] には、アーキテクチャと試験スイートの概要、およびソフトウェアの詳細が記載されています。コード構造の説明も提供されています。クイックスタート用のユーザーガイドと、標準の要件および実装済みの対応する適合性試験アサーションを網羅した表も含まれています。

1.8 Support for the ANSI/NIST-ITL 1-2011 (AN-2011) Standard

1.8 ANSI/NIST-ITL 1-2011(AN-2011)標準のサポート

Part of the process associated with the development of a CTA/CTS designed to test implementations of AN-2011 would include similar and extended capabilities as the test tool described in the previous section. NIST/ITL CSD revised and extended the tables of operands and operators developed for the AN-2007 CTA/CTS assertions to express the assertions derived from the requirements in the AN-2011 standard and developed requirements and assertion tables for the AN-2011 standard. These tables include, at the present time, over twelve-hundred assertions. This initial set of tables was developed based on the AN-2011 4th draft. NIST/ITL CSD contributed the requirements and assertions tables as well as the tables of terms, operands, and operators mentioned above to the Conformance Testing Methodology (CTM) Working Group which was recently established by NIST/ITL to develop a CTM for selected records types of AN-2011.

AN-2011 の実装を試験するために設計された CTA/CTS の開発に関連するプロセスの一部には、前節で述べた試験ツールと同様の、また拡張された機能が含まれることになります。NIST/ITL CSD は、AN-2007 の CTA/CTS のアサーション向けに開発したオペランドと演算子の表を改訂・拡張して、AN-2011 標準の要件から導かれるアサーションを表現できるようにするとともに、AN-2011 標準向けの要件・アサーションの表を作成しました。これらの表には、現時点で 1,200 を超えるアサーションが含まれています。この最初の一連の表は、AN-2011 第 4 版(4th)ドラフトに基づいて作成されました。NIST/ITL CSD は、これらの要件・アサーションの表と、上述の用語、オペランド、演算子の表を、AN-2011 の選択したレコードタイプ向けの CTM を策定するために NIST/ITL が最近設立した適合性試験方法論(CTM)ワーキンググループに提供しました。

The CTM Working Group is led by NIST/ITL staff and has participation from NIST/ITL experts in conformance testing as well as experts from other US Government agencies and the private industry. The tables contained in the annexes include the terms, operands, and operators mentioned above, as well as the tables of requirements and assertions for the following sections and Record Types of the AN-2011 standard (4th draft):

CTM ワーキンググループは NIST/ITL の職員が主導し、NIST/ITL の適合性試験の専門家のほか、米国政府の他機関および民間企業の専門家が参加しています。附属書に含まれる表には、上述の用語、オペランド、および演算子の表のほか、AN-2011 標準(第 4 版(4th)ドラフト)の次の節およびレコードタイプの要件・アサーションの表が含まれます。

•Section 5: Data Conventions

•5 節: データ規約

•Section 7: Information Associated with Several Record Types

•7 節: 複数のレコードタイプに関連する情報

•Section 8.1 Record Type-1: Transaction information record

•8.1 節 レコードタイプ 1: 取引情報レコード

•Section 8.4 Record Type-4: Grayscale fingerprint image

•8.4 節 レコードタイプ 4: グレースケール指紋画像

•Section 8.10Record Type-10: Facial, other body part and SMT image record

•8.10 節 レコードタイプ 10: 顔、その他の身体部位、および SMT 画像レコード

•Section 8.13 Record Type-13: Friction-ridge latent image record

•8.13 節 レコードタイプ 13: 摩擦隆線の遺留画像レコード

•Section 8.14 Record Type-14: Fingerprint image record

•8.14 節 レコードタイプ 14: 指紋画像レコード

•Section 8.15 Record Type-15: Palm print image record

•8.15 節 レコードタイプ 15: 掌紋画像レコード

•Section 8.17 Record Type-17: Iris image record

•8.17 節 レコードタイプ 17: 虹彩画像レコード

•Annex B: Traditional Encoding

•附属書 B: Traditional エンコーディング

Additionally, tables for the deprecated Record Types 3, 5, and 6 and reserved Record Types 11 and 12 are included. Implementation exceptions are identified in Annex D. The headers of the tables of requirements and assertions are based on those specified in the draft Conformance testing methodology for AN-2011 presented at the second AN-2011 Workshop, with minor changes listed below. These changes have been made to accommodate requirements and assertions from the AN-2011 standard.

このほか、廃止されたレコードタイプ 3、5、6 と、予約されたレコードタイプ 11、12 の表も含まれています。実装上の例外は附属書 D で示します。要件・アサーションの表のヘッダーは、第 2 回 AN-2011 ワークショップで示された AN-2011 向けの適合性試験方法論のドラフトで規定されたものに基づいており、以下に示す小さな変更が加えられています。これらの変更は、AN-2011 標準の要件とアサーションに対応するために行われたものです。

As the technical content of the AN-2011 draft standard evolves towards approval and publication and comments on the assertion tables included in Annex C are received, NIST/ITL CSD staff involved in the development of the AN-2011 CTM standard plans to revise the assertion tables until they fully address the requirements in the approved and published AN-2011 standard.

AN-2011 ドラフト標準の技術的内容が承認と発行に向けて進展し、附属書 C に含まれるアサーション表に対するコメントが寄せられるのに応じて、AN-2011 CTM 標準の策定に携わる NIST/ITL CSD の職員は、承認・発行された AN-2011 標準の要件を十分に満たすまで、アサーション表を改訂する予定です。

Annex A - References

附属書 A - 参考文献

[1] NIST Special Publication 500-271, ANSI/NIST-ITL 1-2007 (Revision of ANSI/NIST-ITL 1-2000), American National Standard for Information Systems — Data Format for the Interchange of Fingerprint Facial, & Other Biometric Information – Part 1

[1] NIST Special Publication 500-271, ANSI/NIST-ITL 1-2007 (Revision of ANSI/NIST-ITL 1-2000), American National Standard for Information Systems — Data Format for the Interchange of Fingerprint Facial, & Other Biometric Information – Part 1

[2] NIST Special Publication 500-275, ANSI/NIST-ITL 2-2008 (XML Version of ANSI/NIST-ITL 1-2007), American National Standard for Information Systems — Data Format for the Interchange of Fingerprint Facial, & Other Biometric Information – Part 2: XML Version

[2] NIST Special Publication 500-275, ANSI/NIST-ITL 2-2008 (XML Version of ANSI/NIST-ITL 1-2007), American National Standard for Information Systems — Data Format for the Interchange of Fingerprint Facial, & Other Biometric Information – Part 2: XML Version

[3] Update to “Data Format for the Interchange of Fingerprint, Facial & Other Biometric Information” for multiple finger capture designations ANSI/NIST ITL 1a-2009

[3] Update to “Data Format for the Interchange of Fingerprint, Facial & Other Biometric Information” for multiple finger capture designations ANSI/NIST ITL 1a-2009

[4] Draft NIST Special Publication 500-290, ANSI/NIST-ITL 1-2011, Information Technology: American National Standard for Information Systems - Data Format for the Interchange of Fingerprint, Facial & Other Biometric Information http://biometrics.nist.gov/cs_links/standard/AN_2011_Voting_Version_July_2011.pdf

[4] Draft NIST Special Publication 500-290, ANSI/NIST-ITL 1-2011, Information Technology: American National Standard for Information Systems - Data Format for the Interchange of Fingerprint, Facial & Other Biometric Information http://biometrics.nist.gov/cs_links/standard/AN_2011_Voting_Version_July_2011.pdf

[5] ANSI/NIST Standard Homepage - http://www.nist.gov/itl/iad/ig/ansi_standard.cfm

[5] ANSI/NIST Standard Homepage - http://www.nist.gov/itl/iad/ig/ansi_standard.cfm

[6] NIST/ITL's Biometric Application Programming Interface (BioAPI) Conformance Test Suite (CTS), http://www.nist.gov/itl/csd/biometrics/bioapicts.cfm

[6] NIST/ITL's Biometric Application Programming Interface (BioAPI) Conformance Test Suite (CTS), http://www.nist.gov/itl/csd/biometrics/bioapicts.cfm

[7] ANSI INCITS 429:2008 Information technology - Conformance Testing Methodology for ANSI INCITS 358-2002 BioAPI Specification. Can be obtained from the ANSI eStore: http://webstore.ansi.org/

[7] ANSI INCITS 429:2008 Information technology - Conformance Testing Methodology for ANSI INCITS 358-2002 BioAPI Specification. 入手先: http://webstore.ansi.org/

[8] ANSI INCITS 473:2011 Information Technology - Conformance Testing Methodology Standard for Patron Formats Conforming to INCITS 398-2008, Information Technology - Common Biometric Exchange Formats Framework (CBEFF)

[8] ANSI INCITS 473:2011 Information Technology - Conformance Testing Methodology Standard for Patron Formats Conforming to INCITS 398-2008, Information Technology - Common Biometric Exchange Formats Framework (CBEFF)

[9] INCITS M1 – Biometrics Public Homepage - http://standards.incits.org/a/public/group/m1

[9] INCITS M1 – Biometrics Public Homepage - http://standards.incits.org/a/public/group/m1

[10] NIST/ITL CSD Biometric Conformance Test Architectures and Test Suites Downloads Web Page: http://www.nist.gov/itl/csd/biometrics/biocta_download.cfm

[10] NIST/ITL CSD Biometric Conformance Test Architectures and Test Suites Downloads Web Page: http://www.nist.gov/itl/csd/biometrics/biocta_download.cfm

[11] ISO/IEC JTC1/SC 37 – Biometrics Public Homepage - http://www.iso.org/iso/jtc1_sc37_home

[11] ISO/IEC JTC1/SC 37 – Biometrics Public Homepage - http://www.iso.org/iso/jtc1_sc37_home

[12] Conformance Test Architecture and Test Suite for ANSI/NIST-ITL 1-2007, NISTIR 7791, June 2011, Fernando L. Podio, Dylan Yaga, Christofer J. McGinnis http://csrc.nist.gov/groups/ST/BiomResCenter/CTA_BETA/NISTIR_7791.pdf

[12] Conformance Test Architecture and Test Suite for ANSI/NIST-ITL 1-2007, NISTIR 7791, June 2011, Fernando L. Podio, Dylan Yaga, Christofer J. McGinnis http://csrc.nist.gov/groups/ST/BiomResCenter/CTA_BETA/NISTIR_7791.pdf

Annex B – Test Assertion Syntax and Testing Levels

附属書 B – 試験アサーションの構文と試験レベル

Test assertions are expressed according to the operators and operands found in the tables below, except for those instances where the assertion cannot be clearly or easily represented in a mathematical format. In those cases where English is used to express the assertion, the text will be contained within the < > characters.

試験アサーションは、以下の表にある演算子とオペランドに従って表現します。ただし、アサーションを数学的な形式で明確に、または容易に表現できない場合は除きます。アサーションを英語で表現するこうした場合は、そのテキストを < > の文字で囲みます。

B.1 Operators

B.1 演算子

The table below includes a complete description of the operators used throughout the requirements and assertion tables.

以下の表に、要件・アサーションの表の全体で用いる演算子の完全な説明を示します。

Table B.1 - Operator Definitions

表 B.1 - 演算子の定義

Operator Definitions
OperatorNameDescription
ANDLogical AndTests if both values are true.
ELSEElseCombined with the IF operator to specify what expressions are evaluated when the IF expression is false.
EQEqual ToTests for equality between two values.
GTGreater ThanTests if the first value is greater than the second value
GTEGreater Than or Equal ToTests if the first value is greater than or equal to the second value.
IFLogical IfDetermines if the value or expression is true or false.
IFFIF and Only IFTests the bi-conditional where each of the first and second expressions implies the other.
inContainer SpecificationFor X in Y, selects only those X found in Y.
LTLess ThanTests if the first value is less than the second value.
LTELess Than or Equal ToTests if the first value is less than or equal to the second value.
MOMember OfTests if the value is a contained within the set.
MODModuloFor X MOD Y, provides the remainder of X divided by Y.
NEQNot Equal ToTests for non-equality between two values.
NOTNegateNegates any operator or expression that follows.
ORLogical OrTests if either value is true
P:N in QQuerySelects the Nth occurrence of P in Q.
STSuch ThatEnforces a condition upon the specified value or expression.
THENThenCombined with the IF operator to specify what expressions are evaluated when the IF expression is true.
toRange SelectionFor X to Y, selects a set of values Z ST Z GTE X AND LTE Y
#AllProvides all valid values.
:Data Element SelectionFor X:N, selects the Nth element in X.
,Range ConcatenationFor X,Y, selects the set of values containing X and Y.
.Field SelectionFor X.Y, selects the field specified by Y in Record X.
< >English ExpressionContains English text that could not be reasonably expressed mathematically.
{ }ValueFor {X}, provides the value of X.
[ ]SetThe set to be tested.
演算子の定義
演算子名称説明
AND論理積両方の値が真であるかどうかを試験します。
ELSEElse(それ以外)IF 演算子と組み合わせて、IF の式が偽のときに評価する式を指定します。
EQ等しい2 つの値が等しいかどうかを試験します。
GTより大きい最初の値が 2 番目の値より大きいかどうかを試験します。
GTE以上最初の値が 2 番目の値以上であるかどうかを試験します。
IF論理 If値または式が真か偽かを判定します。
IFFIF and Only IF(必要十分)1 番目の式と 2 番目の式がそれぞれ他方を含意する双条件を試験します。
inコンテナの指定X in Y では、Y に含まれる X のみを選択します。
LTより小さい最初の値が 2 番目の値より小さいかどうかを試験します。
LTE以下最初の値が 2 番目の値以下であるかどうかを試験します。
MOメンバーである値が集合に含まれているかどうかを試験します。
MOD剰余X MOD Y では、X を Y で割った余りを返します。
NEQ等しくない2 つの値が等しくないかどうかを試験します。
NOT否定後に続く演算子または式を否定します。
OR論理和どちらかの値が真であるかどうかを試験します。
P:N in QクエリQ の中の P の N 番目の出現を選択します。
STSuch That(条件付き)指定した値または式に条件を課します。
THENThen(その場合)IF 演算子と組み合わせて、IF の式が真のときに評価する式を指定します。
to範囲の選択X to Y では、Z ST Z GTE X AND LTE Y となる値の集合 Z を選択します。
#すべて有効な値をすべて返します。
:データ要素の選択X:N では、X の N 番目の要素を選択します。
,範囲の連結X,Y では、X と Y を含む値の集合を選択します。
.フィールドの選択X.Y では、レコード X の中の Y で指定されたフィールドを選択します。
< >英語表現数学的に合理的な形で表現できなかった英語のテキストを含みます。
{ }値{X} では、X の値を返します。
[ ]集合試験対象の集合です。

B.2 Terms

B.2 用語

The table below provides a complete description of the terms used throughout the requirements and assertion tables.

以下の表に、要件・アサーションの表の全体で用いる用語の完全な説明を示します。

Table B.2 - Terms Used Throughout the Requirements and Assertion Tables

表 B.2 - 要件・アサーションの表を通じて用いる用語

Term Definitions
TermNameDescription
Field(s)FieldField structure as defined by the AN 1-2011 standard.
IntegersInteger SetSet of all integers.
NANot ApplicableThe test or condition is not applicable.
NULLNullControl character with no value.
Record(s)RecordRecord structure as defined by the AN 1-2011 standard.
RS_SubfieldRS Separated SubfieldSubfield separated by the ASCII RS separator character
SubfieldUS or RS Separated SubfieldAny field or information item separated by ASCII RS or US
TransactionTransactionTransaction structure as defined by the AN 1-2011 standard.
TRUETrueThe test always evaluates to true because the field cannot be checked against a known value.
US_SubfieldUS Separated SubfieldInformation Item separated by the ASCII US separator character
用語の定義
用語名称説明
Field(s)フィールドAN 1-2011 標準で定義されるフィールド構造です。
Integers整数集合すべての整数の集合です。
NA適用不可試験または条件が適用できません。
NULLNull値を持たない制御文字です。
Record(s)レコードAN 1-2011 標準で定義されるレコード構造です。
RS_SubfieldRS 区切りのサブフィールドASCII の RS 区切り文字で区切られたサブフィールドです。
SubfieldUS または RS 区切りのサブフィールドASCII の RS または US で区切られた任意のフィールドまたは情報項目です。
TransactionTransactionAN 1-2011 標準で定義される取引構造です。
TRUE真フィールドを既知の値と照合できないため、試験は常に真と評価されます。
US_SubfieldUS 区切りのサブフィールドASCII の US 区切り文字で区切られた情報項目です。

B.3 Operands

B.3 オペランド

The table below includes a complete description of the operands (functions) used throughout the requirements and assertion tables. The parameter X may represent any combination of operands, terms, and operators.

以下の表に、要件・アサーションの表の全体で用いるオペランド(関数)の完全な説明を示します。パラメーター X は、オペランド、用語、演算子の任意の組み合わせを表すことがあります。

Table B.3 - Operands Used Throughout the Requirements and Assertion Tables

表 B.3 - 要件・アサーションの表を通じて用いるオペランド

Operand Definitions
OperandNameDescription
All(X)All OccurrencesReturns all occurrences of X.
ASCII(X)ASCII ValuesSpecifies that all values represented by X are ASCII values.
Bytes(X)Byte DataReturns the byte data contained in X.
Count(X)Count OccurrencesReturns the number of occurrences of X.
DataLength(X)Length Of (without Special Characters)Returns the length of X without counting Special Characters (such as US, RS, FS).
FieldNumber(X)Field NumberReturns the field number of X.
First(X)First OccurrenceReturns the first occurrence of X.
For(X EQ A to B) {Expression(s)}For LoopEvaluates each Expression for the range specified by A to B.
ForEach(X) {Expression(s)}For EachEvaluates each Expression for every occurrence of X found.
Last(X)Last OccurrenceReturns the last occurrence of X.
Length(X)Length OfReturns the length of X.
Max(X)Maximum ValueReturns the maximum value in the set X.
MaxOccurrences(X)Maximum OccurrencesReturns the maximum number of occurrences of X allowed by the 1-2011 standard.
MaxSize(X)Maximum SizeReturns the maximum size of X per occurrence allowed by the 1-2011 standard.
Min(X)Minimum ValueReturns the minimum value in the set X.
MinOccurrences(X)Minimum OccurrencesReturns the minimum number of occurrences of X allowed by the 1-2011 standard.
MinSize(X)Minimum SizeReturns the minimum size of X per occurrence allowed by the 1-2011 standard.
Next(X)Next OccurrenceReturns the next occurrence of X. Only for use within ForEach Operand’s Expression(s).
Pair(A,B) of XPairReturns all pairs of X. Only for use as a parameter in a ForEach Operand.
ParentField(X)Parent FieldReturns the Field that contains X.
ParentRecord(X)Parent RecordReturns the Record that contains X.
Present(X)Value PresentReturns TRUE if X is present, FALSE otherwise. For subfields in Traditional Encoding, the US and RS separators are always present. Therefore the Present(X) operand returns TRUE if the value between the separators is present.
Previous(X)Previous OccurrenceReturns the previous occurrence of X. Only for use within ForEach Operand’s Expression(s).
Second(X)Second OccurrenceReturns the second occurrence of X.
Sum(X)SummationReturns the summation of all the values that are a member of X.
Type(X)Record TypeReturns the Record Type of X.
Var(X) {Selection Statement}VariableAssigns the entity specified by the Selection Statement to the name X. The assignment is valid for the remainder of the assertion text.
XElm(X)XML ElementReturns the XML Element with name X.
オペランドの定義
オペランド名称説明
All(X)全出現X のすべての出現を返します。
ASCII(X)ASCII 値X が表すすべての値が ASCII 値であることを指定します。
Bytes(X)バイトデータX に含まれるバイトデータを返します。
Count(X)出現数X の出現数を返します。
DataLength(X)長さ(特殊文字を除く)特殊文字(US、RS、FS など)を数えずに X の長さを返します。
FieldNumber(X)フィールド番号X のフィールド番号を返します。
First(X)最初の出現X の最初の出現を返します。
For(X EQ A to B) {Expression(s)}For ループA to B で指定された範囲について、各 Expression を評価します。
ForEach(X) {Expression(s)}For Each(各々について)見つかった X のすべての出現について、各 Expression を評価します。
Last(X)最後の出現X の最後の出現を返します。
Length(X)長さX の長さを返します。
Max(X)最大値集合 X の中の最大値を返します。
MaxOccurrences(X)最大出現数1-2011 標準で許される X の最大出現数を返します。
MaxSize(X)最大サイズ1-2011 標準で許される、出現ごとの X の最大サイズを返します。
Min(X)最小値集合 X の中の最小値を返します。
MinOccurrences(X)最小出現数1-2011 標準で許される X の最小出現数を返します。
MinSize(X)最小サイズ1-2011 標準で許される、出現ごとの X の最小サイズを返します。
Next(X)次の出現X の次の出現を返します。ForEach オペランドの Expression(s) の中でのみ使います。
Pair(A,B) of XペアX のすべてのペアを返します。ForEach オペランドのパラメーターとしてのみ使います。
ParentField(X)親フィールドX を含むフィールドを返します。
ParentRecord(X)親レコードX を含むレコードを返します。
Present(X)値の存在X が存在する場合は TRUE を、存在しない場合は FALSE を返します。Traditional エンコーディングのサブフィールドでは、US および RS の区切り文字は常に存在します。したがって、Present(X) オペランドは、区切り文字の間に値が存在する場合に TRUE を返します。
Previous(X)前の出現X の前の出現を返します。ForEach オペランドの Expression(s) の中でのみ使います。
Second(X)2 番目の出現X の 2 番目の出現を返します。
Sum(X)総和X の要素であるすべての値の総和を返します。
Type(X)レコードタイプX のレコードタイプを返します。
Var(X) {Selection Statement}変数Selection Statement で指定されたエンティティを名前 X に割り当てます。この割り当ては、アサーション文の残りの部分で有効です。
XElm(X)XML 要素名前が X の XML 要素を返します。

B.4 Hierarchy of Conformance Tests

B.4 適合性試験の階層

Three levels of conformance testing are defined below. For each assertion included in the Tables of Requirements and Assertions in Annex C a level of conformance testing is indicated. See Table Headers in C.2 below.

以下に、3 つのレベルの適合性試験を定義します。附属書 C の要件・アサーションの表に含まれる各アサーションには、適合性試験のレベルが示されています。後述の C.2 の表のヘッダーを参照してください。

Level 1 – Checking internal content
レベル 1 – 内部内容の検査

In Level 1 testing, an AN-2011 transaction(s) is checked for field-by-field, subfield-by-subfield and information item–by information item conformance with the specification of the standard, both in terms of ranges, character types, and cardinality. Since Level 1 testing can be performed by a simple field-by-field, subfield-by-subfield and information item–by information item reading of the standard and comparison to known values, and their encoding, performing this level of conformance testing only requires a transaction or a set of ANSI/NIST transactions (as opposed to a computer algorithm or a set of hardware and software). Therefore, any hardware or software components of the implementation being tested do not have to come into the possession of the testing lab. Only AN-2011 transactions created with those components need to be available.

レベル 1 の試験では、AN-2011 の取引について、範囲、文字種、および多重度のいずれの点でも、標準の仕様への適合を、フィールドごと、サブフィールドごと、情報項目ごとに検査します。レベル 1 の試験は、標準をフィールドごと、サブフィールドごと、情報項目ごとに読み、既知の値およびそのエンコーディングと比較するという単純な方法で実施できるため、このレベルの適合性試験の実施には、(コンピュータのアルゴリズムやハードウェアおよびソフトウェアの一式ではなく)1 つの取引または一組の ANSI/NIST 取引があれば足ります。したがって、試験対象の実装のハードウェアまたはソフトウェアの構成要素を試験所が入手する必要はありません。これらの構成要素で作成された AN-2011 の取引だけを用意すればよいです。

Level 2 – Internal consistency checking
レベル 2 – 内部整合性の検査

In Level 2 testing, an AN-2011 transaction(s) is checked to determine if it is internally consistent. This is achieved by relating values from one or more fields, subfields, or information items within a transaction to other values within the same transaction. Level 2 tests involve interactions between multiple values from different parts of the AN-2011 standard and sometimes from implicit assumptions that are not explicitly stated in the base standard. Thus, Level 2 tests require more complex validation than Level 1. Similar to Level 1 testing, Level 2 conformance testing only requires an AN-2011 transaction(s). To ensure that all (or almost all) possible internal consistency checks are tested, tests are performed whenever possible with a large number of transactions representing as many as possible different structural variants.

レベル 2 の試験では、AN-2011 の取引が内部で整合しているかどうかを検査します。これは、1 つの取引の中の 1 つ以上のフィールド、サブフィールド、または情報項目の値を、同じ取引の中の他の値と関連付けることで行います。レベル 2 の試験には、AN-2011 標準のさまざまな部分にある複数の値の相互作用が関わり、基本標準で明示されていない暗黙の前提に由来するものもあります。そのため、レベル 2 の試験には、レベル 1 よりも複雑な検証が必要です。レベル 1 の試験と同様に、レベル 2 の適合性試験にも AN-2011 の取引だけが必要です。起こりうる内部整合性の検査のすべて(またはほぼすべて)が試験されるようにするため、可能な限り、できるだけ多くの異なる構造上のバリエーションを表す多数の取引を使って試験を行います。

Level 3 – Content checking
レベル 3 – 内容の検査

A Level 3 test is intended to test whether an AN-2011 transaction under test is a faithful representation of the original biometric data and that it satisfies those requirements of the standard that are not simply a matter of syntax and format. This level of conformance testing for some requirements might be significantly difficult or even impossible to test.

レベル 3 の試験は、試験対象の AN-2011 の取引が元の生体データを忠実に表現しているかどうか、および標準の要件のうち、単なる構文と形式の問題ではないものを満たしているかどうかを試験するためのものです。要件によっては、このレベルの適合性試験の実施がきわめて困難であるか、不可能でさえある場合があります。

The requirements and assertion tables indicate whether Level 1 or Level 2 conformance testing is required to address the assertion identified in the test assertion. Level 3 conformance tests are indicated only when necessary to show that the requirement is not currently testable or addressed.

要件・アサーションの表には、試験アサーションで特定されたアサーションに対処するために、レベル 1 とレベル 2 のどちらの適合性試験が必要であるかが示されています。レベル 3 の適合性試験は、要件が現時点では試験できない、または対処されていないことを示す必要がある場合にのみ示されます。

Annex C – Tables of Requirements and Assertions for AN-2011 4th Draft

附属書 C – AN-2011 第 4 ドラフト(4th)の要件およびアサーションの表

C.1 Changes in the tables from the respective AN-2007 table

C.1 AN-2007 の対応する表からの表の変更点

The following changes have been made from equivalent tables developed for the AN-2007 version of the standard:

標準の AN-2007 版向けに作成された同等の表から、次の変更が行われています。

•Some Operators, Operands, and Terms have been modified or added to express new assertions.

•新しいアサーションを表現するため、一部の演算子、オペランド、および用語を変更または追加しました。

•Changes have been made for requirements addressing character counts within fields. While the AN-2007 standard included special characters (0x1E and 0x1F) in the count, the AN-2011 standard does not. This is reflected in the AN-2011 tables, which do not include special characters for character counts of fields.

•フィールド内の文字数に関する要件について変更が行われました。AN-2007 標準では特殊文字(0x1E と 0x1F)が文字数に含まれていましたが、AN-2011 標準では含まれません。このことは AN-2011 の表に反映されており、フィールドの文字数に特殊文字を含めていません。

•The < > operator is used in the Requirements Summary column of the tables to represent text not found in the standard. This may be done in cases where the requirement is implied but not stated. The < > operator is used in the Test Assertions column to represent text that could not be expressed mathematically according to the Operators, Operands, and Terms listed in the tables in Annex A.

•< > 演算子は、表の「要件の概要」の列で、標準に見られないテキストを表すために使われます。要件が暗黙のものであり、明記されていない場合に、この使い方をすることがあります。< > 演算子は、「試験アサーション」の列では、附属書 A の表に挙げた演算子、オペランド、および用語によって数学的に表現できなかったテキストを表すために使われます。

C.2 Table Headers

C.2 表のヘッダー

The following table headers are based on those specified in the Conformance Testing Methodology for AN-2011 (5th Draft). However, some minor changes have been made. The “Mnemonic” column was removed because the Mnemonic is now listed either in the Requirement or Assertion ID columns were appropriate. “Section” was changed to “Reference in Base Standard” to allow values other than clause numbers (such as table numbers and annexes).

次の表のヘッダーは、AN-2011(第 5 版(5th)ドラフト)向けの適合性試験方法論で規定されたものに基づいていますが、小さな変更が加えられています。「Mnemonic」の列は削除しました。ニーモニックは現在、該当する場合には Requirement ID または Assertion ID の列に記載されているためです。「Section」は、条項番号以外の値(表番号や附属書など)も使えるように、「Reference in Base Standard」に変更しました。

The following describe the the headings of the requirements and assertions tables included below:

以下では、後掲の要件・アサーションの表の見出しについて説明します。

•Requirement ID: Defines a unique identifier for the requirement and associated assertion or set of assertions. It provides reference to the type of requirement (e.g., transaction, record, and field). The Requirement ID is in the form of “Type: Description” where type may be “Transaction”, “Record”, or “Field”. For requirements found in Annex B of the AN-2011 standard, the Requirement ID is preceded by “Traditional-”.

•Requirement ID: 要件と、それに関連するアサーションまたはアサーションの集合に対する一意の識別子を定義します。要件の種類(たとえば、取引、レコード、フィールド)への参照を示します。Requirement ID は「Type: Description」の形式で、type は「Transaction」、「Record」、または「Field」です。AN-2011 標準の附属書 B にある要件については、Requirement ID の前に「Traditional-」が付きます。

•Reference in Base Standard: Identifies the clause where the requirement is included in the standard. In some cases the reference includes additional information such as a Table number. This header corresponds to the Section header in the Conformance Testing Methodology for AN-2011 (5th draft), but allows references other than clause numbers (i.e., tables, annexes).

•Reference in Base Standard: 要件が標準に含まれている条項を特定します。参照に表番号などの追加情報が含まれる場合もあります。このヘッダーは、AN-2011(第 5 版(5th)ドラフト)向けの適合性試験方法論の Section ヘッダーに対応しますが、条項番号以外の参照(すなわち、表や附属書)も使えるようになっています。

•Requirement Summary: Provides a summary of the requirement detailed as textual information or an interpretation of the requirement in the standard. It carries the essentials of the requirement but may not provide all the text necessary to understand it. The < > operator is used in the Requirement Summary column of the tables to represents text not found in the standard, but that may help indicate what requirement is being represented.

•Requirement Summary: 要件の要約を、テキスト情報または標準における要件の解釈として示します。要件の要点を伝えますが、理解に必要なすべてのテキストを含むとは限りません。< > 演算子は、表の「Requirement Summary」の列で、標準に見られないものの、どの要件が表されているかを示すのに役立つテキストを表すために使われます。

•Level: Indicates whether Level 1 or Level 2 conformance testing is required to address the assertion identified in the Assertion ID column of the same row. Level 3 conformance tests are indicated only when necessary to show that the requirement is not currently testable or addressed.

•Level: 同じ行の Assertion ID の列で特定されたアサーションに対処するために、レベル 1 とレベル 2 のどちらの適合性試験が必要であるかを示します。レベル 3 の適合性試験は、要件が現時点では試験できない、または対処されていないことを示す必要がある場合にのみ示されます。

•Status: Reflects the status specified in the standard:

•Status: 標準で規定されているステータスを反映します。

•M: Mandatory

•M: 必須(Mandatory)

•O: Optional

•O: 任意(Optional)

•D: Dependent

•D: 依存(Dependent)

•M⇑: Mandatory if field/repeating subfield present

•M⇑: フィールド/繰り返しサブフィールドが存在する場合は必須

•O⇑: Optional if field/repeating subfield present for the field or subfield associated with the assertion.

•O⇑: フィールド/繰り返しサブフィールドが存在する場合、アサーションに関連するフィールドまたはサブフィールドについて任意。

•-: Varying statuses. The assertion addresses many fields or subfields of multiple statuses.

•-: ステータスが一定でないもの。アサーションが、複数のステータスを持つ多くのフィールドまたはサブフィールドを対象としています。

•Assertion ID: Defines an identifier of a specific test assertion within the set of test assertions associated with a requirement.

•Assertion ID: 要件に関連する試験アサーションの集合の中の、個別の試験アサーションの識別子を定義します。

•Test Assertion: Provides, whenever possible, a mathematical equation or a procedure using the language specified by the Operators, Operands, and Terms.

•Test Assertion: 可能な場合には常に、演算子、オペランド、および用語で規定された言語を用いた数式または手順を示します。

•The < > operator is used to contain plain text whenever a mathematical formula or simple procedure cannot be detailed.

•< > 演算子は、数式または単純な手順を詳述できない場合に、平文のテキストを含めるために使います。

•Test Note: Contains a number of a note included below the table. The test note may include a test procedure when the complexity of the test assertion does not allow this procedure to be included in the test assertion column. It could also include an explanatory note related to the assertion’s implementation. Additionally, all exceptions (requirements specified by the standard but where the assertion is not included are listed as test notes. Finally, in instances where contradictions or perceived discrepancies are present in the standard, test notes may be used to clarify the approach taken in the assertion tables.

•Test Note: 表の下に記載された注記の番号を含みます。試験アサーションが複雑なために、その手順を試験アサーションの列に含められない場合には、試験ノートに試験手順を含めることがあります。アサーションの実装に関する説明的な注記を含めることもあります。さらに、標準で規定されているものの、アサーションが含まれていないすべての要件が試験ノートとして列挙されます。最後に、標準に矛盾や食い違いと思われる点がある場合には、アサーション表で採用した方針を明確にするために試験ノートを用いることがあります。

•Implementation Support: Denotes a supplier’s implementation support of a particular requirement (“Y”/”N”). A note can follow the table when providing more details of implementation support (or the lack of it) is required.

•Implementation Support: 特定の要件に対する供給者の実装サポートを示します(「Y」/「N」)。実装サポート(またはその欠如)についてさらに詳しく述べる必要がある場合は、表の後に注記を付けることがあります。

•Supported Range: Indicates a range of values supported, especially when it is different than the full range of values specified in the standard. When an information item is specified as a single value, or does not address a range of values, a N/A should be used.

•Supported Range: サポートされる値の範囲を、とくに標準で規定された値の全範囲と異なる場合に示します。情報項目が単一の値として規定されている場合、または値の範囲を扱わない場合は、N/A を用いるべきです。

•Test Result: This column is used to denote the test results. For file and record-level results the results are either “Pass” or “Fail”. The field-level results should be indicated as “Ok”“Error”, “Warning” and “Note”. Explanatory notes can be added below the table.

•Test Result: この列は、試験結果を示すために使います。ファイルおよびレコードレベルの結果は「Pass」または「Fail」のいずれかです。フィールドレベルの結果は「Ok」、「Error」、「Warning」、「Note」で示します。説明的な注記を表の下に追加できます。

•Applicability: This table header indicates which assertions differ (in values required or conditions) between Traditional and NIEM encoding. This table header does not indicate which assertions are addressed by the XML Schema and which will need to be addressed in code. Valid values are:

•Applicability: この表のヘッダーは、どのアサーションがTraditional エンコーディングと NIEM エンコーディングとで(必要な値または条件について)異なるかを示します。このヘッダーは、どのアサーションが XML スキーマで扱われ、どのアサーションをコードで扱う必要があるかを示すものではありません。有効な値は次のとおりです。

•T: The assertion only applies to the Traditional encoding as described in Annex B.

•T: アサーションは、附属書 B で説明するTraditional エンコーディングにのみ適用されます。

•X: The assertion only applies to the NIEM-conformant (XML) encoding as described in Annex C.

•X: アサーションは、附属書 C で説明する NIEM 準拠(XML)のエンコーディングにのみ適用されます。

•B: The assertion is applicable to both Traditional and NIEM (XML) encoding.

•B: アサーションは、Traditional エンコーディングと NIEM(XML)のエンコーディングの両方に適用されます。

•Following the conventions in the AN-2011 standard, test Assertions are expressed using constructs (fields, records, etc.) found in Traditional encoding (such as xx.002 for the second field of each record type). The same assertion applies for the XML elements that correspond to the Traditional constructs. For example, 10.006 in Traditional Encoding corresponds to XML Element <biom:ImageHorizontalLineLengthPixelQuantity>.

•AN-2011 標準の慣例に従い、試験アサーションは、Traditional エンコーディングに見られる構成要素(フィールド、レコードなど。たとえば、各レコードタイプの 2 番目のフィールドを表す xx.002)を用いて表現します。同じアサーションは、Traditional の構成要素に対応する XML 要素にも適用されます。たとえば、Traditional エンコーディングの 10.006 は、XML 要素 <biom:ImageHorizontalLineLengthPixelQuantity> に対応します。

•Some assertions reference subfields, however, NIEM encoding uses nested elements. Expression of Test Assertions that include subfields in the XML encoding requires further review. These assertions are listed with the following applicability values:

•一部のアサーションはサブフィールドを参照しますが、NIEM エンコーディングは入れ子の要素を用います。XML エンコーディングでサブフィールドを含む試験アサーションを表現するには、さらなる検討が必要です。これらのアサーションには、次の適用性の値が示されています。

•X* indicates that the assertion applies only to NIEM-conformant (XML) encoding.

•X* は、アサーションが NIEM 準拠(XML)のエンコーディングにのみ適用されることを示します。

•B* indicates that the assertion is applicable to both Traditional and NIEM (XML) encodings.

•B* は、アサーションがTraditional エンコーディングと NIEM(XML)のエンコーディングの両方に適用されることを示します。

C.3 Assertion Tables for AN-2011 4th Draft

C.3 AN-2011 第 4 ドラフトのアサーション表

Table C.1 - Assertions for Data Conventions

表 C.1 - データ規約のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
5: Data Conventions
Transaction: Required Record Types5.1, Table 1There shall be at least one data record accompanying a Record Type-1. The Record types are listed in Table 1.1MTransaction-Required RecordsPresent(Record ST Type(Record) EQ 1)
AND
Present(Record ST Type(Record) MO [2 to 99]) AND NOT MO [3,5,6,11,12,22 to 97])
T
1MNIEM-Transaction-Required RecordsPresent(XElm(itl:PackageInformationRecord))
AND
Count(Records) GTE 2
X
Transaction: Single Subject5.1All records in a transaction shall pertain to a single subject. Biometric data used to identify another individual requires a separate transaction.3MTransaction-Single Subject<Not tested.>t-1B
Transaction: Records Transmitted Together5.1All of the records belonging to a single transaction shall be transmitted together.3MTransaction-Records Together<Not tested.>t-1B
Transaction: Record Occurrences5.1There may be multiple records in a transaction of each record type other than Type-1.1MTransaction-Record OccurrencesTRUEB
Transaction: Size5.2Although the 2007 and 2008 versions of the standard stated “... there is no upper limit on the number of logical records that may be present in a file...” there was an effective upper limit due to the field size limits specified in the 2007 version (but not the 2008 version). This limit was1MTransaction_SizeCount(Records in Transaction) LTE 1000B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
5: Data Conventions
Transaction: Required Record Types5.1, Table 1Record Type-1 に付随するデータレコードが少なくとも 1 つなければなりません。レコードタイプは表 1 に列挙されています。1MTransaction-Required RecordsPresent(Record ST Type(Record) EQ 1)
AND
Present(Record ST Type(Record) MO [2 to 99]) AND NOT MO [3,5,6,11,12,22 to 97])
T
1MNIEM-Transaction-Required RecordsPresent(XElm(itl:PackageInformationRecord))
AND
Count(Records) GTE 2
X
Transaction: Single Subject5.1取引内のすべてのレコードは単一の対象者に関するものでなければなりません。別の個人を識別するために用いられる生体データには、別個の取引が必要です。3MTransaction-Single Subject<試験しません。>t-1B
Transaction: Records Transmitted Together5.1単一の取引に属するすべてのレコードは、まとめて送信しなければなりません。3MTransaction-Records Together<試験しません。>t-1B
Transaction: Record Occurrences5.1タイプ 1 以外の各レコードタイプについて、取引内に複数のレコードがあってもよいです。1MTransaction-Record OccurrencesTRUEB
Transaction: Size5.22007 年版と 2008 年版の標準では「... there is no upper limit on the number of logical records that may be present in a file...」と述べていましたが、2007 年版(2008 年版ではなく)で規定されたフィールドサイズ制限により、事実上の上限がありました。この上限は1MTransaction_SizeCount(Records in Transaction) LTE 1000B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
3 ASCII2 characters for the information item holding the total number of records of type 2 through 99; thus an upper limit of 999 such records. With the addition of a Type-1 record, the maximum number of records in a transaction was thus restricted to 1000. This upper limit of 1000 records is maintained in this version of the standard to ensure backward compatibility with the 2007 version.
Transaction: Reserved Records5.3 Table 111 Voice Data (future)
12 Dental Record (future)
22-97 reserved for future use.
1MRecords-ReservedNOT Present(Records ST Type(Records) MO [11,12,22 to 97])T
1MNIEM-Records_Reserved<An invalid record type will cause a parsing error in XML because no Record Element Tag is defined (see Table 97).>X
Transaction: Type1-Occurrences5.3.1Transmissions to be exchanged are required to contain one and only one Type-1 record per transaction.1MType1_Occur_OnceCount(Records in Transaction ST Type(Record) EQ 1) EQ 1T
1MNIEM-Type1_Occur_OnceCount(XElm(itl:PackageInformationRecord)) EQ 1X
Transaction: Type1-Record_First5.3.1The Type-1 record shall always be the first record within the transaction.1MType1_FirstType(First(Record in Transaction)) EQ 1T
1MNIEM-Type1_FirstFirst(Record in Transaction) EQ XElm(itl:PackageInformationRecord)X
Transaction: Type1- One More Record5.3.1At least one more record shall be present in the file.1MType1-One More Record<See Requirement ID “Transaction: Required Record Types”>t-2
Record: Type1-Contents5.3.1The Type-1 record shall provide information describing type and use or purpose for the transaction involved, a listing of each record included in the transaction, the originator or source of the physical record, and other useful and required information items.MType1_Contents<The test assertions are included under field testing for Record Type-1: Transaction Information Record.>t-2
Record: Type2-Contents5.3.2Type-2 records shall contain user-defined textual fields providing identification and descriptive information associated with the subject of the transaction.MType2_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-2: User-defined descriptive text record .>t-2
Record: Type2-DOM/APS5.3.2Each entry in a Type-2 record shall have a definition and format that is listed with the Domain owner. Data contained in this record shall conform in format and content to the specifications of the domain name(s) as listed in Field 1.013 Domain name / DOM found in the Type-13MType2_DOM/APS<Not Tested.>t-3B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
タイプ 2 から 99 のレコードの総数を保持する情報項目に割り当てられた 3 ASCII2 文字によるものでした。したがって、そのようなレコードの上限は 999 です。タイプ 1 のレコードを加えると、取引内のレコードの最大数は 1000 に制限されます。この 1000 レコードという上限は、2007 年版との下位互換性を確保するため、この版の標準でも維持されています。
Transaction: Reserved Records5.3 Table 111 音声データ(将来)
12 歯科記録(将来)
22-97 将来の使用のために予約。
1MRecords-ReservedNOT Present(Records ST Type(Records) MO [11,12,22 to 97])T
1MNIEM-Records_Reserved<XML ではレコード要素タグが定義されていないため、無効なレコードタイプがあると構文解析エラーになります(表 97 を参照)。>X
Transaction: Type1-Occurrences5.3.1交換対象の伝送には、取引ごとにタイプ 1 のレコードをちょうど 1 つだけ含めなければなりません。1MType1_Occur_OnceCount(Records in Transaction ST Type(Record) EQ 1) EQ 1T
1MNIEM-Type1_Occur_OnceCount(XElm(itl:PackageInformationRecord)) EQ 1X
Transaction: Type1-Record_First5.3.1タイプ 1 のレコードは、常に取引内の最初のレコードでなければなりません。1MType1_FirstType(First(Record in Transaction)) EQ 1T
1MNIEM-Type1_FirstFirst(Record in Transaction) EQ XElm(itl:PackageInformationRecord)X
Transaction: Type1- One More Record5.3.1ファイルには、少なくとももう 1 つのレコードが存在しなければなりません。1MType1-One More Record<See Requirement ID “Transaction: Required Record Types”>t-2
Record: Type1-Contents5.3.1タイプ 1 のレコードは、関係する取引の種類と用途または目的、取引に含まれる各レコードの一覧、物理レコードの発信者または出典、およびその他の有用かつ必要な情報項目を記述する情報を提供しなければなりません。MType1_Contents<試験アサーションは、レコードタイプ 1(取引情報レコード)のフィールド試験に含まれます。>t-2
Record: Type2-Contents5.3.2タイプ 2 のレコードには、取引の対象者に関連する識別情報および記述情報を提供する、ユーザー定義のテキストフィールドを含めなければなりません。MType2_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 2(ユーザー定義の記述テキストレコード)のフィールド試験に含まれます。>t-2
Record: Type2-DOM/APS5.3.2タイプ 2 のレコードの各エントリには、ドメイン所有者とともに列挙された定義と形式がなければなりません。このレコードに含まれるデータは、フィールド 1.013 Domain name / DOM(タイプ 13MType2_DOM/APS<試験しません。>t-3B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
record, if that field is in the transaction. The default domain is NORAM. Field 1.016 Application profile specifications / APS allows the user to indicate conformance to multiple specifications. If Field 1.016 is specified, the Type-2 record must conform to each of the application profiles.
Transaction: Type3-Deprecated5.3.3, Table 1Record Type-3 shall not be contained in transactions conforming to this version of the standard.MType3_Unsupported<The test assertions are included under field testing for Record Type-3: DEPRECATED.>t-2
Record: Type4-Contents5.3.4Type-4 records were designed to convey fingerprint images captured by an Automated Fingerprint Identification System (AFIS) live-scan reader, or other image capture devices operating at a nominal scanning resolution of 500 pixels per inch (ppi). Many systems still use this record type and it will remain an integral part of the standard.MType4_Contents<The test assertions are included under field testing for Record Type-4: Grayscale fingerprint image.>t-2
Transaction: Type5-Deprecated5.3.5, Table 1Record Type-5 shall not be contained in transactions conforming to this version of the standard.MType5_Unsupported<The test assertions are included under field testing for Record Type-5: DEPRECATED.>t-2
Transaction: Type6-Deprecated5.3.6, Table 1Record Type-6 shall not be contained in transactions conforming to this version of the standard.MType6_Unsupported<The test assertions are included under field testing for Record Type-6: DEPRECATED.>t-2
Transaction: Type7-Contents5.3.7Type-7 is a legacy record type. It was intended as a temporary measure to enable the exchange of image data that would be defined by specific record types in later versions of the standard. Since some older systems still use this record type, it is included in the standard.MType7_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-7: User-defined image record .>t-2
Record: Type8-Contents5.3.8Type-8 records shall be used for scanned binary or vectored signature image data. Each Type-8 record shall contain data representing the signature of the subject from whom the biometric sample is being collected and/or the operator capturing biometric data.MType8_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-8: Signature image record.>t-2
Record: Type9-Contents5.3.9Type-9 records shall contain and be used to exchange minutiae or other friction ridge feature data. Each record shall represent the processed (automated and/or manual) image data from whichMType9_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-9: Minutiae data record .>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
レコード内にあるもの)に記載されたドメイン名の仕様に、形式および内容が適合しなければなりません(そのフィールドが取引内にある場合)。既定のドメインは NORAM です。フィールド 1.016 Application profile specifications / APS により、ユーザーは複数の仕様への適合を示すことができます。フィールド 1.016 が指定されている場合、タイプ 2 のレコードは各アプリケーションプロファイルに適合しなければなりません。
Transaction: Type3-Deprecated5.3.3, Table 1この版の標準に適合する取引に、レコードタイプ 3 を含めてはなりません。MType3_Unsupported<試験アサーションは、レコードタイプ 3: 廃止のフィールド試験に含まれます。>t-2
Record: Type4-Contents5.3.4タイプ 4 のレコードは、自動指紋識別システム(AFIS)のライブスキャン読み取り装置、または公称スキャン解像度 500 ピクセル/インチ(ppi)で動作するその他の画像取得装置で取得した指紋画像を伝えるために設計されました。多くのシステムが今もこのレコードタイプを使用しており、これは標準の不可欠な部分であり続けます。MType4_Contents<試験アサーションは、レコードタイプ 4: グレースケール指紋画像のフィールド試験に含まれます。>t-2
Transaction: Type5-Deprecated5.3.5, Table 1この版の標準に適合する取引に、レコードタイプ 5 を含めてはなりません。MType5_Unsupported<試験アサーションは、レコードタイプ 5: 廃止のフィールド試験に含まれます。>t-2
Transaction: Type6-Deprecated5.3.6, Table 1この版の標準に適合する取引に、レコードタイプ 6 を含めてはなりません。MType6_Unsupported<試験アサーションは、レコードタイプ 6: 廃止のフィールド試験に含まれます。>t-2
Transaction: Type7-Contents5.3.7タイプ 7 は従来のレコードタイプです。これは、標準の後の版で特定のレコードタイプによって定義される画像データの交換を可能にするための暫定措置として意図されていました。一部の古いシステムが今もこのレコードタイプを使用しているため、標準に含められています。MType7_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 7(ユーザー定義画像レコード)のフィールド試験に含まれます。>t-2
Record: Type8-Contents5.3.8タイプ 8 のレコードは、スキャンされたバイナリまたはベクトル形式の署名画像データに用いなければなりません。各タイプ 8 のレコードには、生体サンプルが採取される対象者、および/または生体データを取得する操作者の署名を表すデータを含めなければなりません。MType8_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 8(署名画像レコード)のフィールド試験に含まれます。>t-2
Record: Type9-Contents5.3.9タイプ 9 のレコードにはマニューシャまたはその他の摩擦隆線特徴データを含め、これを交換に用いなければなりません。各レコードは、処理済みの(自動および/または手動による)画像データ(そこからMType9_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 9(マニューシャデータレコード)のフィールド試験に含まれます。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
the characteristics are stated. The primary use of this record type shall be for remote searching of latent prints. New to this version of the standard is the Extended Feature Set (EFS) for latent print markups. There is also a capability to have additional vendor-specified feature sets. Workstation logs may also now be transmitted in this record type.
Record: Type10-Contents5.3.10, Table 54Type-10 image records shall contain and be used to exchange textual and image data from the face, scars, marks, and tattoos (SMT). New to this version of the standard is the extension of the record type to handle images of other body parts. See Table 54 for a list of the images types possible in a Type-10 record. Textual and analytic information pertinent to the digitized image is also contained in this record type.MType10_Contents<The test assertions are included under field testing for Record Type-10: Facial, other body part and SMT image record.>t-2
Transaction: Type11-Reserved5.3.11Type-11 records are reserved for future use.MNA<See Requirement ID “Transaction: Reserved Records”>t-2
Transaction: Type12-Reserved5.3.12Type-12 records are reserved for future use.MNA<See Requirement ID “Transaction: Reserved Records”>t-2
Record: Type13-Contents5.3.13Type-13 image records shall contain and be used to exchange variable-resolution latent friction ridge image data (fingerprint, palmprint and/or plantar) together with fixed and user defined textual information fields pertinent to the digitized image. In all cases, the scanning resolution for latent images shall be at least 39.37 ppmm (1000 ppi). The variable resolution latent image data contained in the Type-13 record shall be uncompressed or may be the output from a lossless compression algorithm.MType13_Contents<The test assertions are included under field testing for Record Type-13: Friction-ridge latent image record . >t-2
Record: Type14-Contents5.3.14Type-14 image records shall contain fingerprint image data. It should be noted that as the resolution is increased, more detailed ridge and structure information becomes available in the fingerprint image. However, in all cases the scanning resolution class shall be at least 19.69MType14_Contents<The test assertions are included under field testing for Record Type-14: Fingerprint image record.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
特徴が記述されたもの)を表さなければなりません。このレコードタイプの主な用途は、遺留指紋のリモート検索でなければなりません。この版の標準で新しく加わったのは、遺留指紋のマークアップ用の拡張特徴セット(EFS)です。ベンダー指定の追加特徴セットを持つ機能もあります。ワークステーションのログも、現在はこのレコードタイプで送信してもよいです。
Record: Type10-Contents5.3.10, Table 54タイプ 10 の画像レコードには、顔、傷跡、マーク、および入れ墨(SMT)に関するテキストデータと画像データを含め、その交換に用いなければなりません。この版の標準で新しく加わったのは、他の身体部位の画像を扱えるようにしたレコードタイプの拡張です。タイプ 10 のレコードで可能な画像タイプの一覧は、表 54 を参照してください。デジタル化された画像に関連するテキスト情報と分析情報も、このレコードタイプに含まれます。MType10_Contents<試験アサーションは、レコードタイプ 10(顔、その他の身体部位、および SMT 画像レコード)のフィールド試験に含まれます。>t-2
Transaction: Type11-Reserved5.3.11タイプ 11 のレコードは、将来の使用のために予約されています。MNA<See Requirement ID “Transaction: Reserved Records”>t-2
Transaction: Type12-Reserved5.3.12タイプ 12 のレコードは、将来の使用のために予約されています。MNA<See Requirement ID “Transaction: Reserved Records”>t-2
Record: Type13-Contents5.3.13タイプ 13 の画像レコードには、可変解像度の遺留摩擦隆線画像データ(指紋、掌紋、および/または足底紋)と、デジタル化された画像に関連する固定およびユーザー定義のテキスト情報フィールドを含め、その交換に用いなければなりません。いかなる場合も、遺留画像のスキャン解像度は少なくとも 39.37 ppmm(1000 ppi)でなければなりません。タイプ 13 のレコードに含まれる可変解像度の遺留画像データは非圧縮であるか、可逆圧縮アルゴリズムの出力であってもよいです。MType13_Contents<試験アサーションは、レコードタイプ 13(摩擦隆線遺留画像レコード)のフィールド試験に含まれます。>t-2
Record: Type14-Contents5.3.14タイプ 14 の画像レコードには、指紋画像データを含めなければなりません。解像度が高くなるにつれて、指紋画像でより詳細な隆線および構造の情報が得られることに留意すべきです。しかし、いかなる場合も、スキャン解像度クラスは少なくとも 19.69MType14_Contents<試験アサーションは、レコードタイプ 14(指紋画像レコード)のフィールド試験に含まれます。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
ppmm (500 ppi).
Record: Type15-Contents5.3.9Type-15 image records shall contain and be used to exchange palm print image data together with fixed and user-defined textual information fields pertinent to the digitized image.
…in all cases the scanning resolution class shall be at least 19.69 ppmm (500 ppi) The variable-resolution palm print image data contained in the Type-15 record may be in a compressed form.
MType15_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-15: Palm print image record.>t-2
Record: Type16-Contents5.3.9The Type-16 image record is designed for developmental purposes and for the exchange of miscellaneous images. This record shall contain and be used to exchange image data together with textual information fields pertinent to the digitized image.MType16_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-16: User-defined testing image record.>t-2
Record: Type17-Contents5.3.17Type-17 image records shall contain iris image data. Field 17.018 (Global unique identifier) from the 2007 and 2008 version of the standard has been deprecated in this version.MType17_Contents<The test assertions are included under field testing for Record Type-17: Iris image record .>t-2
Record: Type18-Contents5.3.18The Type-18 record (new to this version of the standard) shall contain and be used to exchange DNA and related data. It was developed to provide a basic level of interoperability with the draft format of the ISO/IEC 19794-14 DNA data interchange format. With full consideration to privacy, this standard only uses the non-coding regions of DNA. The regions of the DNA that encode phenotypic information are deliberately avoided.MType18_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-18: DNA record .>t-2
Record: Type19-Contents5.3.19Type-19 image records (new to this version of the standard) shall contain and be used to exchange variable-resolution plantar print image data together with fixed and user-defined textual information fields pertinent to the digitized image. …in all cases the scanning resolution used to capture a plantar image shall be at least as great as the minimum scanning resolution of 19.69 ppmm (500 ppi). The variable-resolution plantar image data contained in the Type-MType19_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-19: Plantar record.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
ppmm(500 ppi)です。
Record: Type15-Contents5.3.9タイプ 15 の画像レコードには、デジタル化された画像に関連する固定およびユーザー定義のテキスト情報フィールドとともに、掌紋画像データを含め、その交換に用いなければなりません。
…いかなる場合も、スキャン解像度クラスは少なくとも 19.69 ppmm(500 ppi)でなければなりません。タイプ 15 のレコードに含まれる可変解像度の掌紋画像データは、圧縮形式であってもよいです。
MType15_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 15(掌紋画像レコード)のフィールド試験に含まれます。>t-2
Record: Type16-Contents5.3.9タイプ 16 の画像レコードは、開発目的および雑多な画像の交換のために設計されています。このレコードには、デジタル化された画像に関連するテキスト情報フィールドとともに画像データを含め、その交換に用いなければなりません。MType16_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 16(ユーザー定義試験用画像レコード)のフィールド試験に含まれます。>t-2
Record: Type17-Contents5.3.17タイプ 17 の画像レコードには、虹彩画像データを含めなければなりません。2007 年版と 2008 年版の標準にあったフィールド 17.018(Global unique identifier)は、この版では廃止されました。MType17_Contents<試験アサーションは、レコードタイプ 17(虹彩画像レコード)のフィールド試験に含まれます。>t-2
Record: Type18-Contents5.3.18タイプ 18 のレコード(この版の標準で新規)は、DNA および関連データを含み、その交換に用いなければなりません。これは、ISO/IEC 19794-14 DNA データ交換形式のドラフトとの基本レベルの相互運用性を提供するために策定されました。プライバシーに十分配慮して、この標準では DNA の非コード領域のみを用います。表現型情報をコードする DNA 領域は意図的に避けられています。MType18_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 18(DNA レコード)のフィールド試験に含まれます。>t-2
Record: Type19-Contents5.3.19タイプ 19 の画像レコード(この版の標準で新規)は、デジタル化された画像に関連する固定およびユーザー定義のテキスト情報フィールドとともに、可変解像度の足底紋画像データを含み、その交換に用いなければなりません。…いかなる場合も、足底紋画像の取得に用いるスキャン解像度は、最小スキャン解像度 19.69 ppmm(500 ppi)以上でなければなりません。可変解像度の足底紋画像データ(タイプMType19_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 19(足底紋レコード)のフィールド試験に含まれます。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
19 record may be in a compressed form.
Record: Type20-Contents5.3.20The Type-20 record (new to this version of the standard) shall contain the source representation(s) from which other Record Types were derived. Typically, one source Type-20 representation is used to generate one or more representations for use in other record types.
When a source representation (in a Type-20 record) is processed and the resulting representation is to be used as the source for further derivations, then the processed representation is contained in a Type-20 record. An example would be an image used for both facial (Type-10) and iris (Type-17) records. In some cases, several Type-20 records may be processed to derive a single Type-20 record.
MType20_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-20: Source representation record.>t-2
Record: Type21-Contents5.3.21The Type-21 record shall contain an associated context image, audio / visual recording or other related data. This information does NOT contain information used to derive biometric information contained in other records. Record Type-20 serves that function. Record Type-21 may be used to convey contextual information, such as an image of the area where latent fingerprints were captured.MType21_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-21: Associated context record.>t-2
Record: Type98-Contents5.3.22The Type-98 record shall contain security information that allows for the assurance of the authenticity and/or integrity of the transaction, including such information as binary data hashes, attributes for audit or identification purposes, and digital signatures.MType98_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-98: Information assurance record.>t-2
Record: Type99-Contents5.3.23Type-99 records shall contain and be used to exchange biometric data that is not supported by other ANSI/NIST-ITL record types. This provides a basic level of interoperability and harmonization with other biometric interchange formats. This is accomplished by using a basic record structure that is conformant with ANSI INCITS 398-2005, the Common Biometric Exchange Formats Framework (CBEFF)MType99_Contents<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-99: CBEFF biometric data record.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
19 のレコードに含まれるもの)は、圧縮形式であってもよいです。
Record: Type20-Contents5.3.20タイプ 20 のレコード(この版の標準で新規)は、他のレコードタイプの派生元であるソース表現を含めなければなりません。通常、1 つのタイプ 20 のソース表現を用いて、他のレコードタイプで使う 1 つ以上の表現を生成します。
ソース表現(タイプ 20 のレコード内)が処理され、その結果の表現をさらなる派生のソースとして使う場合、処理済みの表現はタイプ 20 のレコードに含まれます。たとえば、顔(タイプ 10)と虹彩(タイプ 17)の両方のレコードに使われる画像がその例です。場合によっては、複数のタイプ 20 のレコードを処理して、単一のタイプ 20 のレコードを導くことがあります。
MType20_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 20(ソース表現レコード)のフィールド試験に含まれます。>t-2
Record: Type21-Contents5.3.21タイプ 21 のレコードには、関連するコンテキスト画像、音声/映像記録、またはその他の関連データを含めなければなりません。この情報には、他のレコードに含まれる生体情報の導出に用いられる情報は含まれません。その機能はレコードタイプ 20 が果たします。レコードタイプ 21 は、たとえば遺留指紋が採取された場所の画像など、コンテキスト情報を伝えるために用いてもよいです。MType21_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 21(関連コンテキストレコード)のフィールド試験に含まれます。>t-2
Record: Type98-Contents5.3.22タイプ 98 のレコードには、取引の真正性および/または完全性の保証を可能にするセキュリティ情報を含めなければなりません。これには、バイナリデータのハッシュ、監査または識別の目的の属性、デジタル署名などの情報が含まれます。MType98_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 98(情報保証レコード)のフィールド試験に含まれます。>t-2
Record: Type99-Contents5.3.23タイプ 99 のレコードには、他の ANSI/NIST-ITL レコードタイプではサポートされない生体データを含め、その交換に用いなければなりません。これにより、他の生体情報交換形式との基本レベルの相互運用性と調和が得られます。これは、ANSI INCITS 398-2005、Common Biometric Exchange Formats Framework(CBEFF)に適合する基本的なレコード構造MType99_Contents<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 99(CBEFF 生体データレコード)のフィールド試験に含まれます。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
and a biometric data block specification registered with the International Biometrics Industry Association (IBIA).
Record: Type1-ASCII5.6, Table 90Record Type-1 shall always be recorded in all encodings using the 7-bit American National Standard Code for Information Interchange (ASCII). The eighth (leftmost) bit shall contain a zero value.1MType-1-ASCIIForEach(Field in Record ST Type(Record) EQ 1)
{
{Bytes(Field)} MO [0x02, 0x03, 0x1C to 0x7E]
}
T
C.4.1For compatibility with existing implementations of the standard, implementers may wish to limit content to the 128 characters that can be represented by 7-bit ASCII.
Nevertheless, senders and receivers of XML packages using this standard may agree on other character sets, including international character sets.
1MNIEM-Type1-User DefinedTRUEt-4X
Transaction: Encoding-Base645.6Base-64 shall be used for converting non-ASCII text into ASCII form, where required and noted in the standard.1MData-Encoding-Base-64<Not tested.>t-4B
Field: Encoding-CharSets5.6, Table 2Field 1.015 Character encoding/DCS is an optional field that allows the user to specify an alternate character encoding… Field 1.015 Character encoding/DCS contains three information items: the character encoding set index/ CSI, the character encoding sent name/CSN, and the character encoding set version/CSV. The first two items are selected from the appropriate columns of Table 2.3OData-Encoding-CharSets<Not tested.>t-4B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
と、International Biometrics Industry Association(IBIA)に登録された生体データブロック仕様を用いることで実現されます。
Record: Type1-ASCII5.6, Table 90レコードタイプ 1 は、すべてのエンコーディングで、常に 7 ビットの American National Standard Code for Information Interchange(ASCII)を用いて記録しなければなりません。8 ビット目(最左ビット)には 0 の値を含めなければなりません。1MType-1-ASCIIForEach(Field in Record ST Type(Record) EQ 1)
{
{Bytes(Field)} MO [0x02, 0x03, 0x1C to 0x7E]
}
T
C.4.1標準の既存の実装との互換性のため、実装者は、内容を 7 ビット ASCII で表現できる 128 文字に限定することを検討してもよいです。
とはいえ、この標準を用いる XML パッケージの送信者と受信者は、国際文字セットを含む他の文字セットに合意してもよいです。
1MNIEM-Type1-User DefinedTRUEt-4X
Transaction: Encoding-Base645.6標準で必要とされ、記載されている場合に、ASCII 以外のテキストを ASCII 形式に変換するには、Base-64 を用いなければなりません。1MData-Encoding-Base-64<試験していません。>t-4B
Field: Encoding-CharSets5.6, Table 2フィールド 1.015 Character encoding/DCS は、代替の文字エンコーディングをユーザーが指定できるようにする任意のフィールドです…フィールド 1.015 Character encoding/DCS には、文字エンコーディングセットのインデックス / CSI、文字エンコーディングセット名 / CSN、および文字エンコーディングセットのバージョン / CSV の 3 つの情報項目が含まれます。最初の 2 つの項目は、表 2 の該当する列から選択します。3OData-Encoding-CharSets<試験していません。>t-4B

Table C.2 - Assertions for Implementation Domain & Application Profiles

表 C.2 - 実装ドメインとアプリケーションプロファイルのアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
6: Implementation Domain and Application Profiles
Field: Domain6An implementation domain, coded in Field 1.013 Domain name / DOM of a Type-1 record as an optional field, is a group of agencies or organizations that have agreed to use preassigned data fields with specific meanings (typically in Record Type-2) for exchanging information unique to their installations. The implementation domain is usually understood to be the primary application profile of the standard.3OFields-Domain<Not tested.>t-3B
Field: APS6Field 1.016 Application profile specifications / APS allows multiple application profiles to be referenced. The organization responsible for the profile, the profile name and its version are all mandatory for each application profile specified. A transaction must conform to each profile that is included in this field.3OFields-APS<Not tested.>t-3B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
6: Implementation Domain and Application Profiles
Field: Domain6実装ドメインは、タイプ 1 のレコードのフィールド 1.013 Domain name / DOM に任意のフィールドとして符号化され、各自の設備に固有の情報を交換するために、特定の意味を持つ事前に割り当てられたデータフィールド(通常はレコードタイプ 2 内)を使うことに合意した機関または組織のグループです。実装ドメインは通常、標準の主要なアプリケーションプロファイルとして理解されています。3OFields-Domain<試験しません。>t-3B
Field: APS6フィールド 1.016 Application profile specifications / APS により、複数のアプリケーションプロファイルを参照できます。指定する各アプリケーションプロファイルについて、プロファイルの責任組織、プロファイル名、およびそのバージョンはすべて必須です。取引は、このフィールドに含まれる各プロファイルに適合しなければなりません。3OFields-APS<試験しません。>t-3B

Table C.3 - Assertions for Information Associated with Several Records

表 C.3 - 複数のレコードに関連する情報のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
7: Information Associated with Several Records
Field: xx.001-Record Header7.1The record header appears as the first field (xx.001) in each Record Type. It contains information particular to the encoding format chosen, in order to enable proper reading of the record. In Traditional encoding, this field contains the record length in bytes (including all information separators).1Mxx.001-FirstForEach(Record in Transaction ST Type(Record) NEQ 4 OR 8)
{
FieldNumber(First(Field in Record)) EQ 1
}
T
1MNIEM-RecordCategory-FirstForEach(Record in Transaction)
{
First(Field in Record) EQ XElm(<biom:RecordCategoryCode>)
}
X
1Mxx.001-Record HeaderForEach(Record in Transaction)
{
{Record.001} EQ Length (Record)
}
T
C.5.7, 7.1Record Length. There is no corresponding XML element. See Section 7.1.
In NIEM-conformant XML encoding, this field contains the RecordCategoryCode, which is the numeric representation of the Record Type.
1MNIEM-xx.001-Record Category< These assertions are included under field testing for the associated record types.>t-2
Field: xx.999-Reserved7.2Field xx.999 is reserved in Record Types 10 and above for data associated with the record that is described in the other fields of the record. It is mandatory in most of these record types (It does not appear in Type-18 or Type-98).Mxx.999-Reserved< These assertions are included under field testing for the associated record types.>t-2
1Mxx.999-RecordTypesForEach(Field ST FieldNumber(Field) EQ 999)
{
Type(ParentRecord(Field)) GTE 10 AND NOT MO [18, 98]
}
T
1MNIEM-ForEach(Field ST Field EQX
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
7: 複数のレコードに関連する情報
Field: xx.001-Record Header7.1レコードヘッダーは、各レコードタイプの最初のフィールド(xx.001)として現れます。これには、レコードを正しく読み取れるようにするため、選択されたエンコーディング形式に固有の情報が含まれます。Traditional エンコーディングでは、このフィールドに、すべての情報セパレーターを含むレコード長がバイト単位で含まれます。1Mxx.001-FirstForEach(Record in Transaction ST Type(Record) NEQ 4 OR 8)
{
FieldNumber(First(Field in Record)) EQ 1
}
T
1MNIEM-RecordCategory-FirstForEach(Record in Transaction)
{
First(Field in Record) EQ XElm(<biom:RecordCategoryCode>)
}
X
1Mxx.001-Record HeaderForEach(Record in Transaction)
{
{Record.001} EQ Length (Record)
}
T
C.5.7, 7.1レコード長。対応する XML 要素はありません。7.1 節を参照してください。
NIEM 準拠の XML エンコーディングでは、このフィールドに、レコードタイプの数値表現である RecordCategoryCode が含まれます。
1MNIEM-xx.001-Record Category<これらのアサーションは、関連するレコードタイプのフィールド試験に含まれます。>t-2
Field: xx.999-Reserved7.2フィールド xx.999 は、レコードタイプ 10 以上で、そのレコードの他のフィールドに記述されたレコードに関連するデータのために予約されています。これらのレコードタイプのほとんどで必須です(タイプ 18 とタイプ 98 には現れません)。Mxx.999-Reserved<これらのアサーションは、関連するレコードタイプのフィールド試験に含まれます。>t-2
1Mxx.999-RecordTypesForEach(Field ST FieldNumber(Field) EQ 999)
{
Type(ParentRecord(Field)) GTE 10 AND NOT MO [18, 98]
}
T
1MNIEM-ForEach(Field ST Field EQX
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Image-RecordCategoryCodeXElm(nc:BinaryBase64Object))
{
{XElm(biom:RecordCategoryCode) in ParentRecord(Field)} GTE 10 AND NOT MO [18, 98]
}
Field: xx.002-IDC7.3.1Each of the records present in a transaction, with the exception of the Type-1 record, shall include a field (xx.002) containing the information designation character / IDC6. The value of the IDC shall be a sequentially assigned positive integer starting from zero and incremented by one up to a maximum of 99. IDC references are stated in Type-1 Field 1.003 Transaction content / CNT and shall be used to relate information items in the CNT field of the Type-1 record to the other records in the transaction. Two or more records may share a single IDC solely to identify and link together records that pertain to different representations of the same biometric trait.1Mxx.002-IDCExistsForEach( Record ST Type(Record) NEQ 1)
{
Present(Record.002)
}
T
1MNIEM-IDCExistsForEach(Record ST Record NEQ XElm(itl:PackageInformationRecord))
{ Present(XElm(biom:ImageReferenceIdentification)
}
X
1Mxx.002-SecondForEach( Record ST Type(Record) NEQ 4 OR 8)
{
FieldNumber(Second(Field in Record)) EQ 2
}
T
1MNIEM- IDC-SecondForEach(Record ST Record NEQ XElm(itl:PackageInformationRecord))
{
Second(Field in Record) EQ XElm(biom:ImageReferenceIdentification)
}
X
2Mxx.002-IDCSeqValuesVar(IDC_Fields)
{
All(Fields in
Records ST Type(Records) NEQ 1 AND FieldNumber(Fields) EQ 2)
}
{First(Field in IDC_Fields)} EQ 0
AND
ForEach(Field in IDC_Fields)
{
{Field} LTE 99 AND GTE 0
AND
{Next(Field)} LTE <Current Maximum IDC Value> +1
T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Image-RecordCategoryCodeXElm(nc:BinaryBase64Object))
{
{XElm(biom:RecordCategoryCode) in ParentRecord(Field)} GTE 10 AND NOT MO [18, 98]
}
Field: xx.002-IDC7.3.1タイプ 1 のレコードを除き、取引内に存在する各レコードには、情報指定文字 / IDC6 を含むフィールド(xx.002)を含めなければなりません。IDC の値は、0 から始めて 1 ずつ増やし、最大 99 までの、順番に割り当てられた正の整数でなければなりません。IDC への参照は、タイプ 1 のフィールド 1.003 Transaction content / CNT に記載され、タイプ 1 のレコードの CNT フィールド内の情報項目を、取引内の他のレコードに関連付けるために用いなければなりません。同じ生体特徴の異なる表現に関するレコードを関連付けて結び付けることだけを目的として、2 つ以上のレコードが 1 つの IDC を共有してもよいです。1Mxx.002-IDCExistsForEach( Record ST Type(Record) NEQ 1)
{
Present(Record.002)
}
T
1MNIEM-IDCExistsForEach(Record ST Record NEQ XElm(itl:PackageInformationRecord))
{ Present(XElm(biom:ImageReferenceIdentification)
}
X
1Mxx.002-SecondForEach( Record ST Type(Record) NEQ 4 OR 8)
{
FieldNumber(Second(Field in Record)) EQ 2
}
T
1MNIEM- IDC-SecondForEach(Record ST Record NEQ XElm(itl:PackageInformationRecord))
{
Second(Field in Record) EQ XElm(biom:ImageReferenceIdentification)
}
X
2Mxx.002-IDCSeqValuesVar(IDC_Fields)
{
All(Fields in
Records ST Type(Records) NEQ 1 AND FieldNumber(Fields) EQ 2)
}
{First(Field in IDC_Fields)} EQ 0
AND
ForEach(Field in IDC_Fields)
{
{Field} LTE 99 AND GTE 0
AND
{Next(Field)} LTE <Current Maximum IDC Value> +1
T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
}
1MNIEM-IDCSeqValuesVar(IDC_Fields)
{
All(XElm(biom:ImageReferenceIdentification))
}
{First(Field in IDC_Fields)} EQ 0
AND
ForEach(Field in IDC_Fields)
{
{Field} LTE 99 AND GTE 0
AND
{Next(Field)} LTE <Current Maximum IDC Value> +1
}
X
2Mxx.002-IDCRelate<See tables in test note.>t-5B
M1.003-CNT<These assertions are included under field testing for Record Type-1: Transaction Information Record.>t-2
Field: xx.002-IDCImages7.3.1Two or more image records may share a single IDC only when they are enhancements of a single image; such transformations shall have identical dimensions.2Mxx.002-SameDimensionForEach(Pair(A,B) of Records <with matching IDC fields>)
{
{A.006} EQ {B.006}
AND
{A.007} EQ {B.007}
}
B
3Mxx.002-SameImage<Not tested.
Not feasible to test if the samples are from the same image, only that the samples come from the same type of biometric trait (see Field: xx.002-IDC)>
t-1B
Field: xx.997-SOR7.3, 7.3.2…optional field xx.997 is allowed in biometric data sample Record Types 10 and above that could have the biometric sample derived from a source1Oxx.997-SOR-RecordTypesForEach(Field ST Type(Field) EQ 997)
{
Type(ParentRecord(Field)) GTE 10 AND NOT MO [18,21,98]
T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
}
1MNIEM-IDCSeqValuesVar(IDC_Fields)
{
All(XElm(biom:ImageReferenceIdentification))
}
{First(Field in IDC_Fields)} EQ 0
AND
ForEach(Field in IDC_Fields)
{
{Field} LTE 99 AND GTE 0
AND
{Next(Field)} LTE <Current Maximum IDC Value> +1
}
X
2Mxx.002-IDCRelate<試験ノートの表を参照してください。>t-5B
M1.003-CNT<これらのアサーションは、レコードタイプ 1: 取引情報レコードのフィールド試験に含まれます。>t-2
Field: xx.002-IDCImages7.3.12 つ以上の画像レコードが 1 つの IDC を共有してもよいのは、それらが単一の画像の拡張版である場合に限ります。このような変換では、寸法が同一でなければなりません。2Mxx.002-SameDimensionForEach(Pair(A,B) of Records <with matching IDC fields>)
{
{A.006} EQ {B.006}
AND
{A.007} EQ {B.007}
}
B
3Mxx.002-SameImage<試験していません。
サンプルが同じ画像に由来するかどうかを試験することはできません。試験できるのは、サンプルが同じ種類の生体特徴に由来することだけです(Field: xx.002-IDC を参照)>
t-1B
Field: xx.997-SOR7.3, 7.3.2…任意のフィールド xx.997 は、レコードタイプ 10 以上の生体データサンプルレコードのうち、生体サンプルがソース1Oxx.997-SOR-RecordTypesForEach(Field ST Type(Field) EQ 997)
{
Type(ParentRecord(Field)) GTE 10 AND NOT MO [18,21,98]
T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
representation in Record Type-20. The biometric data is stored in Field xx.999. Record Type-18 (DNA) does not contain a field xx.997, since it does not contain a field 18.999. Record Type-98 does not contain this field, since that is not a biometric data record type. Record Type-21 does not contain biometric data and thus does not include field xx.997. This field is comprised of one mandatory and one optional information item, as described below.}
1ONIEM-SOR-RecordTypesForEach(Field ST Field EQ XElm(biom:SourceRepresentation))
{
{XElm(biom:RecordCategoryCode) in ParentRecord(Field)} GTE 10 AND NOT MO [18, 21, 98]
}
X
Field: xx.997-SOR-SRN7.3, 7.3.2.1The first information item contains the source representation number / SRN. This is mandatory for each Field xx.997. It contains an index to a particular instance of a Type-20 record in the transaction. This same index value appears in the appropriate instance of Record Type-20 as Field 20.021: Source representation number / SRN. The value of the SRN shall be a sequentially assigned positive integer starting from one and incremented by one, not to exceed 255.2M⇑xx.997-SOR-SRNForEach(Field ST FieldNumber(Field) EQ 997)
{
Present(Record in Transaction ST
Type(Record) EQ 20
AND
{Record.021} EQ { US_Subfield:1 in Field}
)
}
B*
2Oxx.997-SOR-SRN-SeqValuesVar(SOR_Fields)
{
All(Fields ST FieldNumber(Fields) EQ 997)
}
Var(MaxSOR){2}
{US_Subfield:1 in RS_Subfield:1 in First(Field in ASC_Fields)} EQ 1
AND
ForEach(Field in SOR_Fields)
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 255] AND LTE {MaxSOR}
AND IF {US_Subfield:1 in RS_Subfield} EQ {MaxSOR} THEN
Var(MaxSOR) { MaxSOR + 1}
B*
Field:7.3,The second information item in Field2Oxx.997-ForEach(Field ST FieldNumber(Field) EQ 997)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
表現(レコードタイプ 20 にあるもの)から導出された可能性のあるもので認められます。生体データはフィールド xx.999 に格納されます。レコードタイプ18(DNA)にはフィールド xx.997 がありません。これは、フィールド18.999がないためです。レコードタイプ98にはこのフィールドがありません。これは、生体データのレコードタイプではないためです。レコードタイプ21には生体データが含まれないため、フィールド xx.997 も含まれません。このフィールドは、以下に述べるとおり、1つの必須情報項目と1つの任意情報項目で構成されます。}
1ONIEM-SOR-RecordTypesForEach(Field ST Field EQ XElm(biom:SourceRepresentation))
{
{XElm(biom:RecordCategoryCode) in ParentRecord(Field)} GTE 10 AND NOT MO [18, 21, 98]
}
X
Field: xx.997-SOR-SRN7.3, 7.3.2.1最初の情報項目には、ソース表現番号 / SRN が含まれます。これは、各フィールド xx.997 で必須です。取引内のタイプ20レコードの特定のインスタンスへのインデックスを含みます。この同じインデックス値は、レコードタイプ20の該当するインスタンスにフィールド20.021: Source representation number / SRNとして現れます。SRNの値は、1から始めて1ずつ増やし、255を超えないよう順番に割り当てられる正の整数でなければなりません。2M⇑xx.997-SOR-SRNForEach(Field ST FieldNumber(Field) EQ 997)
{
Present(Record in Transaction ST
Type(Record) EQ 20
AND
{Record.021} EQ { US_Subfield:1 in Field}
)
}
B*
2Oxx.997-SOR-SRN-SeqValuesVar(SOR_Fields)
{
All(Fields ST FieldNumber(Fields) EQ 997)
}
Var(MaxSOR){2}
{US_Subfield:1 in RS_Subfield:1 in First(Field in ASC_Fields)} EQ 1
AND
ForEach(Field in SOR_Fields)
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 255] AND LTE {MaxSOR}
AND IF {US_Subfield:1 in RS_Subfield} EQ {MaxSOR} THEN
Var(MaxSOR) { MaxSOR + 1}
B*
Field:7.3,フィールド xx.997 の 2 番目の情報項目2Oxx.997-ForEach(Field ST FieldNumber(Field) EQ 997)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
xx.997-SOR-RSP7.3.2.2xx.997 is optional. It is the reference segment position / RSP. It contains the index to a particular set of segmentation coordinates of the source representation (There may be more than one segment, such as from an audio / visual recording, with different frames yielding input for separate biometric data record instances in the same transaction). This same segmentation index value appears in Record Type-20 as the reference segment position / RSP in Field 20.016: Segments / SEG. There may be up to 99 segments listed in Field 20.016, but only the segment used to produce the biometric data contained in Field xx.999 of the particular instance of Record Type-xx is identified in Field xx.997.⇑SOR-RSP{
Present(US_Subfield in 20.016 ST US_Subfield EQ {US_Subfield:2 in Field})
)
}
3Oxx.997-SOR-RSP-CorrectSegment<Not Tested.
Not feasible to test if the RSP that matches was used to produce the biometric data. >
t-1B*
1O20.016-SegmentOccurencesCount(US_Subfield in 20.016) LTE 99B*
Field: xx.995-ASC7.3, 7.3.3New to this version of the standard, optional field xx.995 is contained in biometric data sample Record Types 10 and above that may have instances of Record Type-21 linked to it… This field consists of a maximum of 255 repeating subfields, each of which contains two information items, as described below.1Oxx.995-ASC-RecordTypesForEach(Field ST FieldNumber(Field) EQ 995)
{
Type(ParentRecord(Field)) GTE 10
}
T
1ONIEM-ASC-RecordTypesForEach(Field ST Field EQ XElm(biom:AssociatedContext))
{
{XElm(biom:RecordCategoryCode) in ParentRecord(Field)} GTE 10
}
X
1Oxx.995-ASC-SubfieldOccurencesForEach(Field ST FieldNumber(Field) EQ 995)
{
Count(RS_Subfields in Field) LTE 255
}
B*
Field: xx.995-ASC-ACN7.3, 7.3.3.1The first information item contains the associated context number / ACN for a particular Record Type-21. This is mandatory for each Field xx.995, when the field is used. It contains an index to a particular instance of a Type-21 record in the transaction. This same index value appears in the appropriate instance of Record Type-21 as Field 21.021: Associated context number / ACN. The value of the ACN shall be a sequentially assigned a positive integer starting from one and incremented by one, not to exceed 255.2M⇑xx.995-ASC-ACNForEach(Field ST FieldNumber(Field) EQ 995)
{
ForEach(RS_Subfield in Field)
{
Present(Record in Transaction ST
Type(Record) EQ 21
AND
{Record.021} EQ { US_Subfield:1 in RS_Subfield} )
}
}
B*
2Oxx.995-ASC-Var(ASC_Fields)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
xx.997-SOR-RSP7.3.2.2は任意です。これは参照セグメント位置 / RSP です。ソース表現の特定のセグメンテーション座標の組へのインデックスを含みます(音声/映像の記録のように、複数のセグメントがあり、異なるフレームが同じ取引内の別々の生体データレコードのインスタンスへの入力となる場合があります)。この同じセグメンテーションのインデックス値は、レコードタイプ 20 にフィールド 20.016: Segments / SEG の参照セグメント位置 / RSP として現れます。フィールド 20.016 には最大 99 のセグメントを列挙できますが、レコードタイプ xx の特定のインスタンスのフィールド xx.999 に含まれる生体データの生成に用いられたセグメントだけが、フィールド xx.997 で特定されます。⇑SOR-RSP{
Present(US_Subfield in 20.016 ST US_Subfield EQ {US_Subfield:2 in Field})
)
}
3Oxx.997-SOR-RSP-CorrectSegment<試験していません。
一致する RSP が生体データの生成に用いられたかどうかを試験することはできません。>
t-1B*
1O20.016-SegmentOccurencesCount(US_Subfield in 20.016) LTE 99B*
Field: xx.995-ASC7.3, 7.3.3この版の標準で新しく加わった任意のフィールド xx.995 は、レコードタイプ 21 のインスタンスが関連付けられる可能性がある、生体データサンプルのレコードタイプ 10 以上に含まれます…このフィールドは最大 255 の繰り返しサブフィールドで構成され、各サブフィールドには、以下に述べる 2 つの情報項目が含まれます。1Oxx.995-ASC-RecordTypesForEach(Field ST FieldNumber(Field) EQ 995)
{
Type(ParentRecord(Field)) GTE 10
}
T
1ONIEM-ASC-RecordTypesForEach(Field ST Field EQ XElm(biom:AssociatedContext))
{
{XElm(biom:RecordCategoryCode) in ParentRecord(Field)} GTE 10
}
X
1Oxx.995-ASC-SubfieldOccurencesForEach(Field ST FieldNumber(Field) EQ 995)
{
Count(RS_Subfields in Field) LTE 255
}
B*
Field: xx.995-ASC-ACN7.3, 7.3.3.1最初の情報項目には、特定のレコードタイプ 21 の関連コンテキスト番号 / ACN が含まれます。これは、このフィールドを使用する場合、各フィールド xx.995 で必須です。取引内のタイプ 21 のレコードの特定のインスタンスへのインデックスを含みます。この同じインデックス値は、レコードタイプ 21 の該当するインスタンスにフィールド 21.021: Associated context number / ACN として現れます。ACN の値は、1 から始めて 1 ずつ増やし、255 を超えない、順番に割り当てられた正の整数でなければなりません。2M⇑xx.995-ASC-ACNForEach(Field ST FieldNumber(Field) EQ 995)
{
ForEach(RS_Subfield in Field)
{
Present(Record in Transaction ST
Type(Record) EQ 21
AND
{Record.021} EQ { US_Subfield:1 in RS_Subfield} )
}
}
B*
2Oxx.995-ASC-Var(ASC_Fields)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
ACN-SeqValues{
All(Fields in Transaction ST FieldNumber(Fields) EQ 995)
}
Var(MaxASC){2}
{US_Subfield:1 in RS_Subfield:1 in First(Field in ASC_Fields)} EQ 1
AND
ForEach(Field in ASC_Fields)
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 255] AND LTE {MaxASC}
AND IF{US_Subfield:1 in RS_Subfield} EQ {MaxASC} THEN
Var(MaxASC) { MaxASC + 1}
}
}
Field: xx.995-ASC-ASP7.3, 7.3.3.2The second information item in Field xx.995 is optional. It is the associated segment position / ASP. It contains the index to a particular set of segmentation coordinates of the associated context data. This same segmentation index value appears in Record Type-21 as the associated segment position / ASP in Field 21.016: Segments / SEG. There may be up to 99 segments listed in Field 21.016, but only the relevant segment is contained in Field xx.995.2O⇑xx.995-ASC-ASPForEach(Field ST FieldNumber(Field) EQ 995)
{
Present( US_Subfield in 20.016 ST US_Subfield EQ {US_Subfield:2 in Field})
)
}
B*
3O⇑xx.995-ASC-ASP-CorrectSegment<Not Tested.
Not feasible to test if the ASP that matches is the one that is relevant. >
t-1B
1M21.016-SegmentOccurencesCount(US_Subfield in 21.016) LTE 99B*
Field: 10.039-RefNum7.3, 7.3.4There may be several Type-10 images of a particular part of the body. For instance, a photograph of a tattoo may cover the entire tattoo. Another may be a zoom-in shot of a portion of the tattoo. In order to link these two images, the same index2D10.039-T10-DiffIDCIF Count(Records ST Type(Records) EQ 10) GT 1 THEN
ForEach(Pair (A,B) of Records ST Type(Records) EQ 10)
{
IF {A.039} EQ {B.039}
T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
ACN-SeqValues{
All(Fields in Transaction ST FieldNumber(Fields) EQ 995)
}
Var(MaxASC){2}
{US_Subfield:1 in RS_Subfield:1 in First(Field in ASC_Fields)} EQ 1
AND
ForEach(Field in ASC_Fields)
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 255] AND LTE {MaxASC}
AND IF{US_Subfield:1 in RS_Subfield} EQ {MaxASC} THEN
Var(MaxASC) { MaxASC + 1}
}
}
Field: xx.995-ASC-ASP7.3, 7.3.3.2フィールド xx.995 の 2 番目の情報項目は任意です。これは関連セグメント位置 / ASP です。関連コンテキストデータの特定のセグメンテーション座標の組へのインデックスを含みます。この同じセグメンテーションのインデックス値は、レコードタイプ 21 にフィールド 21.016: Segments / SEG の関連セグメント位置 / ASP として現れます。フィールド 21.016 には最大 99 のセグメントを列挙できますが、フィールド xx.995 には該当するセグメントだけが含まれます。2O⇑xx.995-ASC-ASPForEach(Field ST FieldNumber(Field) EQ 995)
{
Present( US_Subfield in 20.016 ST US_Subfield EQ {US_Subfield:2 in Field})
)
}
B*
3O⇑xx.995-ASC-ASP-CorrectSegment<試験しません。
一致する ASP が該当するものであるかどうかを試験することはできません。>
t-1B
1M21.016-SegmentOccurencesCount(US_Subfield in 21.016) LTE 99B*
Field: 10.039-RefNum7.3, 7.3.4身体の特定の部位について、複数のタイプ 10 の画像が存在する場合があります。たとえば、入れ墨の写真が入れ墨全体を写している場合もあれば、入れ墨の一部を拡大した写真もあります。これら 2 つの画像を関連付けるため、同じインデックス2D10.039-T10-DiffIDCIF Count(Records ST Type(Records) EQ 10) GT 1 THEN
ForEach(Pair (A,B) of Records ST Type(Records) EQ 10)
{
IF {A.039} EQ {B.039}
T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
number is assigned to Field 10.039: Type-10 reference number / T10, which is new to this version of the standard. Note that these images would have different IDC values.THEN
{A.002} NEQ {B.002}
}
2DNIEM-T10-DiffDCIF Count(XElm(itl:PackageFacialAndSMTImageRecord)) GT 1
THEN
ForEach(Pair (A,B) of XElm(itl:PackageFacialAndSMTImageRecord)
{
IF { XElm(nc:IdentificationID) in XElm(biom:PhysicalFeatureReferenceIdentification) in A} EQ { XElm(nc:IdentificationID) in XElm(biom:PhysicalFeatureReferenceIdentification) in B}
THEN
{ XElm(nc:IdentificationID) in XElm(biom:ImageReferenceIdentification) in A} EQ { XElm(nc:IdentificationID) in XElm(biom:ImageReferenceIdentification) in B}
}
X
3D10.039-T10-SameBodyPart<Not Tested.
Not feasible to test if the images are related to the same part of the body.>
t-1B
Field: 14.026-SimCap7.3, 7.3.5In order to accommodate the emergence of technology that can simultaneously capture fingerprint images on separate platens or other technology that does not preserve the full relative position of the fingers to each other, Field 14.026: Simultaneous capture / SCF allows the user to use the same index for all images that were simultaneously captured.3O14.026-SCF<Not Tested.
Not feasible to test if the images were captured simultaneously. >
t-1B
Field: xx.902-ANN7.4.1New for this version of the standard, optional field xx.902 is used to store annotation, logging, or processing information associated with one or more processing algorithms or workstations. If present, this text field shall consist of one or more subfields comprised of a set of information items.1Oxx.902-ANN-SubfieldsForEach(Record in Transaction)
{
IF Present(Record.902) THEN
Count(RS_Subfields in Record.902) GTE 1
AND
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
番号は、この版の標準で新しく加わったフィールド 10.039: Type-10 reference number / T10 に割り当てられます。これらの画像は異なる IDC 値を持つことに注意してください。THEN
{A.002} NEQ {B.002}
}
2DNIEM-T10-DiffDCIF Count(XElm(itl:PackageFacialAndSMTImageRecord)) GT 1
THEN
ForEach(Pair (A,B) of XElm(itl:PackageFacialAndSMTImageRecord)
{
IF { XElm(nc:IdentificationID) in XElm(biom:PhysicalFeatureReferenceIdentification) in A} EQ { XElm(nc:IdentificationID) in XElm(biom:PhysicalFeatureReferenceIdentification) in B}
THEN
{ XElm(nc:IdentificationID) in XElm(biom:ImageReferenceIdentification) in A} EQ { XElm(nc:IdentificationID) in XElm(biom:ImageReferenceIdentification) in B}
}
X
3D10.039-T10-SameBodyPart<試験していません。
画像が身体の同じ部位に関連しているかどうかを試験することはできません。>
t-1B
Field: 14.026-SimCap7.3, 7.3.5別々のプラテンで指紋画像を同時に取得できる技術や、指同士の相対的な位置全体を保持しない技術の登場に対応するため、フィールド 14.026: Simultaneous capture / SCF により、同時に取得されたすべての画像に同じインデックスを使えるようにしています。3O14.026-SCF<試験していません。
画像が同時に取得されたかどうかを試験することはできません。>
t-1B
Field: xx.902-ANN7.4.1この版の標準で新しく加わった任意のフィールド xx.902 は、1 つ以上の処理アルゴリズムまたはワークステーションに関連する、注釈、ログ、または処理の情報を格納するために用います。存在する場合、このテキストフィールドは、情報項目の組で構成される 1 つ以上のサブフィールドで構成されなければなりません。1Oxx.902-ANN-SubfieldsForEach(Record in Transaction)
{
IF Present(Record.902) THEN
Count(RS_Subfields in Record.902) GTE 1
AND
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Four mandatory information items comprise a subfield:
• The first information item is the GMT date and time / GMT when the processing occurred. (See Section 7.7.2.2)
• The second information item (processing algorithm name/version / NAV) shall contain an unformatted text string of up to 64 characters identifying the name and version of the processing algorithm or workstation.
• The third information item (algorithm owner / OWN) shall contain a text string of up to 64 characters with the contact information for the organization that owns the processing algorithm or latent workstation.
• The fourth and final information item (process description / PRO) shall contain an unformatted text string of up to 255 characters describing a process or procedure applied to the sample in this Type-XX record.
ForEach(RS_Subfield in Record.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
}
1M⇑xx.902-ANN-GMTForEach(Record in Transaction)
{
IF Present(Record.902) THEN ForEach(RS_Subfield in Record.902)
{
{US_Subfield:1 in RS_Subfield}
MO [ValidUTC/GMT]
}
}
t-6T
1M⇑NIEM-xx.902-ANN-GMT< The treatment of subfields for validation in the XML version requires further review.>t-6X*
1M⇑xx.902-ANN-NAV&OWNForEach(Record in Transaction)
{
IF Present(Record.902) THEN ForEach(RS_Subfield in Record.902)
{
Length(US_Subfield:2 in RS_Subfield) LTE 64
AND
Length(US_Subfield:3 in RS_Subfield) LTE 64
}
}
B*
1M⇑xx.902-ANN-PROForEach(Record in Transaction)
{
IF Present(Record.902) THEN ForEach(RS_Subfield in Record.902)
{
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
サブフィールドは、4 つの必須の情報項目で構成されます。
• 最初の情報項目は、処理が行われた GMT の日時 / GMT です(7.7.2.2 節を参照)。
• 2 番目の情報項目(処理アルゴリズムの名前/バージョン / NAV)には、処理アルゴリズムまたはワークステーションの名前とバージョンを示す、書式なしの最大 64 文字のテキスト文字列を含めなければなりません。
• 3 番目の情報項目(アルゴリズムの所有者 / OWN)には、処理アルゴリズムまたは遺留指紋ワークステーションを所有する組織の連絡先情報を示す、最大 64 文字のテキスト文字列を含めなければなりません。
• 4 番目で最後の情報項目(処理の説明 / PRO)には、このタイプ XX のレコードのサンプルに適用された処理または手順を説明する、書式なしの最大 255 文字のテキスト文字列を含めなければなりません。
ForEach(RS_Subfield in Record.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
}
1M⇑xx.902-ANN-GMTForEach(Record in Transaction)
{
IF Present(Record.902) THEN ForEach(RS_Subfield in Record.902)
{
{US_Subfield:1 in RS_Subfield}
MO [ValidUTC/GMT]
}
}
t-6T
1M⇑NIEM-xx.902-ANN-GMT<XML 版における、検証のためのサブフィールドの扱いには、さらなる検討が必要です。>t-6X*
1M⇑xx.902-ANN-NAV&OWNForEach(Record in Transaction)
{
IF Present(Record.902) THEN ForEach(RS_Subfield in Record.902)
{
Length(US_Subfield:2 in RS_Subfield) LTE 64
AND
Length(US_Subfield:3 in RS_Subfield) LTE 64
}
}
B*
1M⇑xx.902-ANN-PROForEach(Record in Transaction)
{
IF Present(Record.902) THEN ForEach(RS_Subfield in Record.902)
{
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Length(US_Subfield:4 in RS_Subfield) LTE 255
}
}
Field: 9.901-ULA7.4.2This optional field, which is new to this version of the standard, exists only in Record Type- 9. This workstation has been extensively used and logs generated from it were routinely transmitted in Field 9.901: Universal latent workstation annotation information / ULA. This version of the standard formally includes this field to record latent processing logs formatted according to the ULW.O9.901-ULW<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-9: Minutiae data record.>t-2
Field: 98.900-ALF7.4.3If a user wishes to maintain a log of differences between transmissions,… may be used to indicate how and why a transaction was modified. Record Type-98 is new to this version of the standard.O98.900-ALF<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-98: Information assurance record.>t-2
Field: Comment7.4.4The optional Comment field appears in many record types and may be used to insert free text information. It is not reserved exclusively for log-related information but has historically often been used for this purpose. It is limited to a maximum of 126 characters.1O10.038-COM-Length: 10.038Length(10.038) LTE 126B
1Oxx.020-COM-Length: [13,14].020Length([13,14].038) LTE 126B
1O17.021-COM-Length: 17.021Length(17.021) LTE 126B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Length(US_Subfield:4 in RS_Subfield) LTE 255
}
}
Field: 9.901-ULA7.4.2この版の標準で新しく加わったこの任意のフィールドは、レコードタイプ 9 にのみ存在します。このワークステーションは広く使われており、そこで生成されたログは、フィールド 9.901: Universal latent workstation annotation information / ULA で日常的に送信されていました。この版の標準は、ULW に従って書式化された遺留指紋処理ログを記録するために、このフィールドを正式に含めています。O9.901-ULW<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 9: マニューシャデータレコードのフィールド試験に含まれます。>t-2
Field: 98.900-ALF7.4.3ユーザーが送信間の差異のログを保持したい場合、…は、取引がどのように、なぜ変更されたかを示すために用いられることがあります。レコードタイプ 98 は、この版の標準で新規です。O98.900-ALF<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 98: 情報保証レコードのフィールド試験に含まれます。>t-2
Field: Comment7.4.4任意の Comment フィールドは多くのレコードタイプに現れ、自由形式のテキスト情報を挿入するために用いられることがあります。ログ関連の情報専用に予約されているわけではありませんが、歴史的にこの目的でよく使われてきました。最大 126 文字に制限されています。1O10.038-COM-Length: 10.038Length(10.038) LTE 126B
1Oxx.020-COM-Length: [13,14].020Length([13,14].038) LTE 126B
1O17.021-COM-Length: 17.021Length(17.021) LTE 126B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Field: 98.003-IA/DFO7.5.1The Record Type-98: Information assurance record, which is new to this version of the standard, allows special data protection procedures to ensure the integrity of the transmitted data. Field 98.003: IA data format owner / DFO and Field 98.005: IA data format type / DFT define the information assurance regime that is employed to store data in Fields 98.200-899: User-defined fields / UDF.M98.003-DFO<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-98: Information assurance record.>t-2
Field: HAS7.5.2Optional field xx.996, which is new to this version of the standard, is designed for use in Record types 10 and above with a Field xx.999 storing the biometric data. It is comprised of 64 characters representing hexadecimal values. Thus, each character may be a digit from “0” to “9” or a letter “A” through “F”.1Oxx.996-HAS-RecordTypesForEach(Field ST FieldNumber(Field) EQ 996)
{
Type(ParentRecord(Field)) GTE 10
}
T
1ONIEM-HAS-RecordTypesForEach(Field ST Field EQ XElm(biom:ImageHashValue))
{
{XElm(biom:RecordCategoryCode) in ParentRecord(Field)} GTE 10
}
X
1Oxx.996-HAS-HEXForEach(Field ST FieldNumber(Field) EQ 996)
{
Bytes(Field) MO[ASCII(0 to 9,A to F)]
}
B
1Oxx.996-HAS-LengthForEach(Field ST FieldNumber(Field) EQ 996)
{
Length(Field) EQ 64
}
B
Field: Agency Codes7.6, Table 19, Table53, Table66, Table67, Table71This information appears in a variety of fields (often xx.004), and is handled the same in all such fields. The data content of this field is defined by the user and shall be in accordance with the receiving agency. In the 2007 version of the standard, these fields are comprised of one information item {destination}{originating} agency identifier / DAI or ORI. The 2008 version1M1.007-DAI/ORI-LengthLength(US_Subfield:1 in 1.007) GTE 1B*
1M1.008-DAI/ORI-LengthLength(US_Subfield:1 in 1.008) GTE 1B*
1M[10,13,14,1Length(US_Subfield:1 in [10,13,14,15,17].004)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Field: 98.003-IA/DFO7.5.1この版の標準で新規のレコードタイプ 98: 情報保証レコードは、送信データの完全性を確保するための特別なデータ保護手順を可能にします。フィールド 98.003: IA data format owner / DFO とフィールド 98.005: IA data format type / DFT は、フィールド 98.200-899: User-defined fields / UDF にデータを格納するために採用される情報保証の方式を定義します。M98.003-DFO<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 98: 情報保証レコードのフィールド試験に含まれます。>t-2
Field: HAS7.5.2この版の標準で新しく加わった任意のフィールド xx.996 は、生体データを格納するフィールド xx.999 を持つレコードタイプ 10 以上で使うために設計されています。これは、16 進値を表す 64 文字で構成されます。したがって、各文字は「0」から「9」までの数字、または「A」から「F」までの文字のいずれかです。1Oxx.996-HAS-RecordTypesForEach(Field ST FieldNumber(Field) EQ 996)
{
Type(ParentRecord(Field)) GTE 10
}
T
1ONIEM-HAS-RecordTypesForEach(Field ST Field EQ XElm(biom:ImageHashValue))
{
{XElm(biom:RecordCategoryCode) in ParentRecord(Field)} GTE 10
}
X
1Oxx.996-HAS-HEXForEach(Field ST FieldNumber(Field) EQ 996)
{
Bytes(Field) MO[ASCII(0 to 9,A to F)]
}
B
1Oxx.996-HAS-LengthForEach(Field ST FieldNumber(Field) EQ 996)
{
Length(Field) EQ 64
}
B
Field: Agency Codes7.6, Table 19, Table53, Table66, Table67, Table71この情報はさまざまなフィールド(多くは xx.004)に現れ、そのようなすべてのフィールドで同じように扱われます。このフィールドのデータ内容はユーザーが定義し、受信機関に従ったものでなければなりません。標準の 2007 年版では、これらのフィールドは 1 つの情報項目 {destination}{originating} agency identifier / DAI または ORI で構成されていました。2008 年版1M1.007-DAI/ORI-LengthLength(US_Subfield:1 in 1.007) GTE 1B*
1M1.008-DAI/ORI-LengthLength(US_Subfield:1 in 1.008) GTE 1B*
1M[10,13,14,1Length(US_Subfield:1 in [10,13,14,15,17].004)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
of the standard added a second optional information item {destination} {originating} agency name / DAN or OAN, which is a text description of the organization name. It may be up to 125 characters in length. This second information item is optional for all encodings in this version of the standard and may be encoded using an alternate character encoding set (See Section 5.6).5, 17].004-DAI/ORI-LengthGTE 1
1O1.007-DAN/OAN-LengthLength(US_Subfield:2 in 1.007) LTE 125B*
1O1.008-DAN/OAN-LengthLength(US_Subfield:2 in 1.008) LTE 125B*
1O[10,13,14,17].004-DAN/OAN-LengthLength(US_Subfield:2 in [10,13,14,17].004)) LTE 125B*
1MFields: DAN/OAN-ValuePresent(1.007,1.008, [10,13,14,17].004)B*
Field: Device ID7.7.1.1The DUI shall contain a string uniquely identifying the device or source of the data. This field shall be one of:
• Host PC MAC address, identified by the first character “M”, or
• Host PC processor ID, identified by the first character “P.
Fields containing the DUI are:
-Field 9.903: Device unique identifier / DUI
-Field 10.903: Device unique identifier / DUI
-Field 13.903: Device unique identifier / DUI
-Field 14.903: Device unique identifier / DUI
-Field 15.903: Device unique identifier / DUI
-Field 16.903: Device unique identifier / DUI
-Field 17.017: Device unique identifier / DUI
-Field 19.903: Device unique identifier / DUI
-Field 20.903: Device unique identifier / DUI
-Field 99.903: Device unique identifier / DUI
1O[10,13,14].903-DUI-FormatIF(First(Byte in [10,13,14].903) EQ ASCII(M) THEN {
Bytes([10,13,14].903) MO[ASCII(0 to 9, A to F)]
AND
Length([10,13,14].903) EQ 13
}
IF(First(Byte in [10,13,14].903) EQ ASCII(P) THEN {
Length([10,13,14].903) EQ 17
}
B
1O17.017-DUIIF(First(Byte in 17.017) EQ ASCII (M) THEN
{
Bytes(17.017) MO[ASCII (0 to 9, A to F)]
AND
Length(17.017) EQ 13
}
IF(First(Byte in 17.017) EQ ASCII (P) THEN
{
Length(17.017) EQ 17
}
B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
の標準では、組織名のテキストによる説明である 2 番目の任意の情報項目 {destination} {originating} agency name / DAN または OAN が追加されました。長さは最大 125 文字とできます。この 2 番目の情報項目は、この版の標準のすべてのエンコーディングで任意であり、代替の文字エンコーディングセットを使って符号化してもよいです(5.6 節を参照)。5, 17].004-DAI/ORI-LengthGTE 1
1O1.007-DAN/OAN-LengthLength(US_Subfield:2 in 1.007) LTE 125B*
1O1.008-DAN/OAN-LengthLength(US_Subfield:2 in 1.008) LTE 125B*
1O[10,13,14,17].004-DAN/OAN-LengthLength(US_Subfield:2 in [10,13,14,17].004)) LTE 125B*
1MFields: DAN/OAN-ValuePresent(1.007,1.008, [10,13,14,17].004)B*
Field: Device ID7.7.1.1DUI には、データのデバイスまたは出所を一意に識別する文字列を含めなければなりません。このフィールドは次のいずれかでなければなりません。
• 最初の文字が「M」で識別されるホスト PC の MAC アドレス、または
• 最初の文字が「P」で識別されるホスト PC のプロセッサー ID。
DUI を含むフィールドは次のとおりです。
-Field 9.903: Device unique identifier / DUI
-Field 10.903: Device unique identifier / DUI
-Field 13.903: Device unique identifier / DUI
-Field 14.903: Device unique identifier / DUI
-Field 15.903: Device unique identifier / DUI
-Field 16.903: Device unique identifier / DUI
-Field 17.017: Device unique identifier / DUI
-Field 19.903: Device unique identifier / DUI
-Field 20.903: Device unique identifier / DUI
-Field 99.903: Device unique identifier / DUI
1O[10,13,14].903-DUI-FormatIF(First(Byte in [10,13,14].903) EQ ASCII(M) THEN {
Bytes([10,13,14].903) MO[ASCII(0 to 9, A to F)]
AND
Length([10,13,14].903) EQ 13
}
IF(First(Byte in [10,13,14].903) EQ ASCII(P) THEN {
Length([10,13,14].903) EQ 17
}
B
1O17.017-DUIIF(First(Byte in 17.017) EQ ASCII (M) THEN
{
Bytes(17.017) MO[ASCII (0 to 9, A to F)]
AND
Length(17.017) EQ 13
}
IF(First(Byte in 17.017) EQ ASCII (P) THEN
{
Length(17.017) EQ 17
}
B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
The MAC address takes the form of six pairs of hexadecimal values (0 through 9 and A through F). They are represented without separators in this standard for a total of 13 characters. The processor ID may be up to 16 characters.
Field: Make Model7.7.1.2The MMS contains the make, model and serial number for the capture device. It shall consist of three information items. Each information item shall be 1 to 50 characters. Any or all information items may indicate that information is unknown with the value “0”.
Fields containing the MMS are:
-Field 9.904: Make/model/serial number
-Field 10.904: Make/model/serial number
-Field 13.904: Make/model/serial number
-Field 14.904: Make/model/serial number
-Field 15.904: Make/model/serial number
-Field 16.904: Make/model/serial number
-Field 17.019: Make/model/serial number
-Field 19.904: Make/model/serial number
-Field 20.904: Make/model/serial number
-Field 99.904: Make/model/serial number
1O[10,13,14].904-MMSCount(US_Subfields in [10,13,14].904) EQ 3
AND
Length(US_Subfields in [10,13,14].904) LTE 50 AND GTE 1
B*
1O17.019-MMSCount(US_Subfields in 17.019) EQ 3
AND
Length(US_Subfields in 17.019) LTE 50 AND GTE 1
B*
Field: Device Monitoring7.7.1.3, Table 3This field describes the level of human monitoring that was associated with the biometric sample capture. Alphabetic values are selected from Table 3. These are corresponding fields in the standard:
-Field 10.030: Device monitoring mode / DMM
-Field 14.030: Device monitoring mode / DMM
-Field 15.030: Device monitoring mode / DMM
-Field 16.030: Device monitoring mode / DMM
-Field 17.030: Device monitoring mode / DMM
-Field 19.030: Device monitoring mode / DMM
1O[10,14,17].030-DMM{[10,14,17].030} MO [ASCII(CONTROLLED, ASSISTED, OBSERVED, UNATTENDED, UNKNOWN)]B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
MAC アドレスは、16 進値(0 から 9 と A から F)の 6 組のペアという形をとります。この標準では、区切り文字なしで表し、合計 13 文字です。プロセッサー ID は最大 16 文字です。
Field: Make Model7.7.1.2MMS には、取得装置のメーカー、モデル、およびシリアル番号が含まれます。3 つの情報項目で構成されなければなりません。各情報項目は 1 から 50 文字でなければなりません。情報項目の一部またはすべてで、値「0」により、その情報が不明であることを示してもよいです。
MMS を含むフィールドは次のとおりです。
-Field 9.904: Make/model/serial number
-Field 10.904: Make/model/serial number
-Field 13.904: Make/model/serial number
-Field 14.904: Make/model/serial number
-Field 15.904: Make/model/serial number
-Field 16.904: Make/model/serial number
-Field 17.019: Make/model/serial number
-Field 19.904: Make/model/serial number
-Field 20.904: Make/model/serial number
-Field 99.904: Make/model/serial number
1O[10,13,14].904-MMSCount(US_Subfields in [10,13,14].904) EQ 3
AND
Length(US_Subfields in [10,13,14].904) LTE 50 AND GTE 1
B*
1O17.019-MMSCount(US_Subfields in 17.019) EQ 3
AND
Length(US_Subfields in 17.019) LTE 50 AND GTE 1
B*
Field: Device Monitoring7.7.1.3, Table 3このフィールドは、生体サンプルの取得に関連した人による監視のレベルを示します。英字の値は表 3 から選択します。標準内の対応するフィールドは次のとおりです。
-Field 10.030: Device monitoring mode / DMM
-Field 14.030: Device monitoring mode / DMM
-Field 15.030: Device monitoring mode / DMM
-Field 16.030: Device monitoring mode / DMM
-Field 17.030: Device monitoring mode / DMM
-Field 19.030: Device monitoring mode / DMM
1O[10,14,17].030-DMM{[10,14,17].030} MO [ASCII(CONTROLLED, ASSISTED, OBSERVED, UNATTENDED, UNKNOWN)]B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Field: UTC7.7.2.2UTC has replaced GMT as the main reference time scale terminology, but the older terminology is retained in this standard for existing record types. In this standard, Field
1.014 Greenwich mean time / GMT shall be taken to mean the UTC value. Some newer record types using this format refer to the data as UTC (such as in Field 18.013: Sample collection date / SCD). This time is independent of the actual time zone where the time and date is recorded. The data is YYYYMMDDhhmmssZ, where the Z is indicates the zone description of 0 hours.
MFields-UTC<This requirement applies to any field that contains a date or time value. The assertions will be applied individually for those fields. >t-2, t-6
Field: TIX7.7.2.5, Table 81, Table 84For Type-20 or Type-21 records containing video or audio, this field shall contain two information items, time index start /TIS and time index end / TIE for the start and end times of segments within a video or audio file, measured in hh:mm:ss.sss where ss.sss refers to the seconds and milliseconds. This field is comprised of one or more subfields. Each repeating subfield corresponds to a single segment, with a starting and end time as separate information items.DFields-TIX<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-98: Information assurance record.>t-2
Field: Geographic7.7.3, Table 53, Table 66, Table 67, Table 69, Table 70, Table 71, Table 74, Table 80, Table 81, Table 86New to this version of the standard, this optional field (xx.998) is used in Record Types 10 and above. It specifies the coordinated universal time (UTC) and the location where the biometric sample was collected. All of this information is contained in up to fifteen information items.1Oxx.998-Geo-RecordTypesForEach(Field ST FieldNumber(Field) EQ 998)
{
Type(ParentRecord(Field)) GTE 10}
T
1ONIEM-GEO-RecordTypesForEach(Field ST Field EQ XElm(biom:CaptureLocation))
{
{XElm(biom:RecordCategoryCode) in ParentRecord(Field)} GTE 10
}
X
1Oxx.998-Geo-SubfieldsForEach(Field ST FieldNumber(Field) EQ 998)
{
Count(US_Subfields in Field) LTE 15
}
B*
1Oxx.998-ForEach(Field ST FieldNumber(Field) EQ 998)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Field: UTC7.7.2.2UTCが主要な基準時間尺度の用語としてGMTに取って代わりましたが、既存のレコードタイプについては、この標準でも古い用語が残されています。この標準では、フィールド
1.014 Greenwich mean time / GMTはUTC値を意味するものとして扱わなければなりません。この形式を用いる一部の新しいレコードタイプは、このデータをUTCと呼んでいます(フィールド18.013: Sample collection date / SCDなど)。この時刻は、時刻と日付が記録された実際のタイムゾーンから独立しています。データはYYYYMMDDhhmmssZの形式で、Zは0時間のタイムゾーンを示します。
MFields-UTC<この要件は、日付または時刻の値を含むすべてのフィールドに適用されます。アサーションは、それらのフィールドに個別に適用されます。>t-2, t-6
Field: TIX7.7.2.5, Table 81, Table 84ビデオまたは音声を含むタイプ20またはタイプ21のレコードでは、このフィールドに、ビデオまたは音声ファイル内のセグメントの開始時刻と終了時刻を表す、時刻インデックス開始 / TISと時刻インデックス終了 / TIEの2つの情報項目を含めなければなりません。これらはhh:mm:ss.sss(ss.sssは秒とミリ秒)で測定されます。このフィールドは1つ以上のサブフィールドで構成されます。繰り返しの各サブフィールドは単一のセグメントに対応し、開始時刻と終了時刻は別々の情報項目になります。DFields-TIX<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合は、レコードタイプ 98: 情報保証レコードのフィールド試験に含まれます。>t-2
Field: Geographic7.7.3, Table 53, Table 66, Table 67, Table 69, Table 70, Table 71, Table 74, Table 80, Table 81, Table 86この版の標準で新しく加わったこの任意のフィールド(xx.998)は、レコードタイプ10以上で用いられます。協定世界時(UTC)と、生体サンプルが採取された場所を指定します。これらの情報はすべて、最大15の情報項目に含まれます。1Oxx.998-Geo-RecordTypesForEach(Field ST FieldNumber(Field) EQ 998)
{
Type(ParentRecord(Field)) GTE 10}
T
1ONIEM-GEO-RecordTypesForEach(Field ST Field EQ XElm(biom:CaptureLocation))
{
{XElm(biom:RecordCategoryCode) in ParentRecord(Field)} GTE 10
}
X
1Oxx.998-Geo-SubfieldsForEach(Field ST FieldNumber(Field) EQ 998)
{
Count(US_Subfields in Field) LTE 15
}
B*
1Oxx.998-ForEach(Field ST FieldNumber(Field) EQ 998)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Subfield CharType ANSU{
Bytes(US_Subfield:1 in Field}) MO [0x30 to 0x39, 0x5A, 0x7A]
AND
Bytes(US_Subfield:2,5 in Field) MO [0x2B,0x2D,0x2E,0x30 to 0x39]
AND
Bytes(US_Subfield:3,6 in Field) MO [0x2E, 0x30 to 0x39]
AND
Bytes(US_Subfield:4,7,11,12 Field) MO [0x30 to 0x39]
AND
Bytes(US_Subfield:8 in Field) MO [0x2D, 0x30 to 0x39]
AND
Bytes(US_Subfield:9,10 in Field) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
AND
Present(Bytes(US_Subfield:113 to 15 in Field)
1Oxx.998-CharCountForEach(Field ST FieldNumber(Field) EQ 998)
{
DataLength(Field) MO [15 to 365]
}
B
1Oxx.998-Subfield CharCountForEach(Field ST FieldNumber(Field) EQ 998)
{
Length(US_Subfield:1 in Field)) EQ 15
AND
Length(US_Subfield:2,14 in Field) MO [1 to 10]
AND
Length(US_Subfield:3,6 in Field) MO [1 to 5]
AND
Length(US_Subfield:4,7 in Field) MO [1 to 2]
AND
Length(US_Subfield:5 in Field) MO [1 to 11]
AND
Length(US_Subfield:8 in Field) MO [1 to 8]
AND
Length(US_Subfield:9 in Field) MO [2 to 6]
AND
Length(US_Subfield:10 in Field) EQ 5
AND
Length(US_Subfield:11,12 in Field) MO [2 to 5]
AND
Length(US_Subfield:13 in Field) MO [1 to 150]
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Subfield CharType ANSU{
Bytes(US_Subfield:1 in Field}) MO [0x30 to 0x39, 0x5A, 0x7A]
AND
Bytes(US_Subfield:2,5 in Field) MO [0x2B,0x2D,0x2E,0x30 to 0x39]
AND
Bytes(US_Subfield:3,6 in Field) MO [0x2E, 0x30 to 0x39]
AND
Bytes(US_Subfield:4,7,11,12 Field) MO [0x30 to 0x39]
AND
Bytes(US_Subfield:8 in Field) MO [0x2D, 0x30 to 0x39]
AND
Bytes(US_Subfield:9,10 in Field) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
AND
Present(Bytes(US_Subfield:113 to 15 in Field)
1Oxx.998-CharCountForEach(Field ST FieldNumber(Field) EQ 998)
{
DataLength(Field) MO [15 to 365]
}
B
1Oxx.998-Subfield CharCountForEach(Field ST FieldNumber(Field) EQ 998)
{
Length(US_Subfield:1 in Field)) EQ 15
AND
Length(US_Subfield:2,14 in Field) MO [1 to 10]
AND
Length(US_Subfield:3,6 in Field) MO [1 to 5]
AND
Length(US_Subfield:4,7 in Field) MO [1 to 2]
AND
Length(US_Subfield:5 in Field) MO [1 to 11]
AND
Length(US_Subfield:8 in Field) MO [1 to 8]
AND
Length(US_Subfield:9 in Field) MO [2 to 6]
AND
Length(US_Subfield:10 in Field) EQ 5
AND
Length(US_Subfield:11,12 in Field) MO [2 to 5]
AND
Length(US_Subfield:13 in Field) MO [1 to 150]
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
AND
Length(US_Subfield:15 in Field) MO [1 to 126]
}
Field: Geographic-Subfield 17.7.3The first information item is mandatory. It is the coordinated universal time entry /UTE. See Section 7.7.2.2.1M⇑xx.998-Geo-UTEForEach(Field ST FieldNumber(Field) EQ 998)
{
Present(US_Subfield:1 in Field)
AND
{US_Subfield:1 in Field} MO [ValidUTC/GMT]
}
t-6T
1M⇑NIEM-xx.998-Geo-UTE< The treatment of subfields for validation in the XML version requires further review.>t-6X*
Field: Geographic-Conditional7.7.3The next eight information items (information items 2 through 9) comprise the Geographic Coordinate Latitude/Longitude. As a group, they are optional. However, latitude degree value / LTD and longitude degree value / LGD are co-conditional, so they shall both be present if either is present. Further, “minutes” values LTM and LGM can only be present if their corresponding “degrees” values are present. LTS and LGS can only be present if their corresponding “minutes” value is present. The other entries are optional.
If a decimal value is used in a particular information item, the more granular information item shall be empty (e.g., if Longitude minutes equals 45.27, Longitude seconds shall be empty).
The tenth, eleventh and twelfth information items are treated as a group and are optional.
These three information items together are a coordinate which represents a location with a Universal Transverse Mercator (UTM) coordinate. If any of these three information items is present, all shall be present.
2-xx.998-Geo-Cond-Subfields 2,5ForEach(Field ST FieldNumber(Field) EQ 998)
{
Present{US_Subfield:2 in Field} IFF
Present {US_Subfield:5 in Field}
}
B*
2-xx.998-Geo-Cond-Subfields 10 to 12ForEach(Field ST FieldNumber(Field) EQ 998)
{
IF Present(US_Subfield:10 OR US_Subfield:11 OR US_Subfield:12 in Field)
THEN
Present(US_Subfield:10 AND US_Subfield:11 AND US_Subfield:12 in Field)
}
B*
2Oxx.998-Geo-Cond-DMSForEach(Field ST FieldNumber(Field) EQ 998)
{
IF Present (US_Subfield:4 in Field) THEN Present(US_Subfield:3 in Field)
AND
IF Present(US_Subfield:3 in Field) THEN
Present (US_Subfield:2 in Field)
AND
IF Present(US_Subfield:7 in Field) THEN
Present (US_Subfield:6 in Field)
AND
IF Present(US_Subfield:6 in Field) THEN
Present (US_Subfield:5 in Field)
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
AND
Length(US_Subfield:15 in Field) MO [1 to 126]
}
Field: Geographic-Subfield 17.7.3最初の情報項目は必須です。これは協定世界時の入力 / UTE です。7.7.2.2 節を参照してください。1M⇑xx.998-Geo-UTEForEach(Field ST FieldNumber(Field) EQ 998)
{
Present(US_Subfield:1 in Field)
AND
{US_Subfield:1 in Field} MO [ValidUTC/GMT]
}
t-6T
1M⇑NIEM-xx.998-Geo-UTE<XML 版における、検証のためのサブフィールドの扱いには、さらなる検討が必要です。>t-6X*
Field: Geographic-Conditional7.7.3次の8つの情報項目(情報項目2から9)は、地理座標の緯度/経度で構成されます。グループとしては任意です。ただし、緯度の度の値 / LTDと経度の度の値 / LGDは共条件であり、どちらか一方が存在する場合は両方が存在しなければなりません。さらに、「分」の値LTMとLGMは、対応する「度」の値が存在する場合にのみ存在できます。LTSとLGSは、対応する「分」の値が存在する場合にのみ存在できます。ほかの項目は任意です。
特定の情報項目で小数値を用いる場合は、より細かい情報項目を空にしなければなりません(たとえば、経度の分が45.27の場合、経度の秒は空にしなければなりません)。
10番目、11番目、および12番目の情報項目は1つのグループとして扱われ、任意です。
これら3つの情報項目は合わせて、ユニバーサル横メルカトル(UTM)座標による位置を表す座標です。これら3つの情報項目のいずれかが存在する場合は、すべてが存在しなければなりません。
2-xx.998-Geo-Cond-Subfields 2,5ForEach(Field ST FieldNumber(Field) EQ 998)
{
Present{US_Subfield:2 in Field} IFF
Present {US_Subfield:5 in Field}
}
B*
2-xx.998-Geo-Cond-Subfields 10 to 12ForEach(Field ST FieldNumber(Field) EQ 998)
{
IF Present(US_Subfield:10 OR US_Subfield:11 OR US_Subfield:12 in Field)
THEN
Present(US_Subfield:10 AND US_Subfield:11 AND US_Subfield:12 in Field)
}
B*
2Oxx.998-Geo-Cond-DMSForEach(Field ST FieldNumber(Field) EQ 998)
{
IF Present (US_Subfield:4 in Field) THEN Present(US_Subfield:3 in Field)
AND
IF Present(US_Subfield:3 in Field) THEN
Present (US_Subfield:2 in Field)
AND
IF Present(US_Subfield:7 in Field) THEN
Present (US_Subfield:6 in Field)
AND
IF Present(US_Subfield:6 in Field) THEN
Present (US_Subfield:5 in Field)
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
}
2Oxx.998-Geo-Cond-DecimalsForEach(Field ST FieldNumber(Field) EQ 998)
{
IF {US_Subfield:2 in Field} MOD 1 NEQ 0 THEN Length(US_Subfield:3 in Field) EQ 0 AND Length(US_Subfield:4) EQ 0
AND
IF {US_Subfield:3 in Field} MOD 1 NEQ 0 THEN Length(US_Subfield:4 in Field) EQ 0
AND
IF {US_Subfield:5 in Field} MOD 1 NEQ 0 THEN Length(US_Subfield:6 in Field) EQ 0 AND Length(US_Subfield:7) EQ 0
AND
IF {US_Subfield:6 in Field} MOD 1 NEQ 0 THEN Length(US_Subfield:7 in Field) EQ 0
}
B*
Field: Geographic-Values-SubFields 2 to 87.7.3The second information item is latitude degree value / LTD. This is a value that specifies the degree of latitude. The value shall be between -90 (inclusive) and +90 (inclusive).
The third information item is latitude minute value / LTM. This is a value that specifies a minute of a degree. The value shall be between 0 (inclusive) to 60 (exclusive).
The fourth information item is the latitude second value / LTS. This is a value that specifies a second of a minute. The integer shall be 0 (inclusive) to 60 (exclusive).
The fifth information item is the longitude degree value / LGD. It is a value that specifies the degree of a longitude. The value shall be between -180 (inclusive) and
1-xx.998-Geo-Values-Sub2 to 8ForEach(Field ST FieldNumber(Field) EQ 998)
{
{US_Subfield:2 in Field} GTE -90 AND LTE 90
AND
{US_Subfield:3 in Field} GTE 0 AND LT 60
AND
{US_Subfield:4 in Field} GTE 0 AND LT 60
AND
{US_Subfield:5 in Field} GTE -180 AND LTE 180
AND
{US_Subfield:6 in Field} GTE 0 AND LT 60
AND
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
}
2Oxx.998-Geo-Cond-DecimalsForEach(Field ST FieldNumber(Field) EQ 998)
{
IF {US_Subfield:2 in Field} MOD 1 NEQ 0 THEN Length(US_Subfield:3 in Field) EQ 0 AND Length(US_Subfield:4) EQ 0
AND
IF {US_Subfield:3 in Field} MOD 1 NEQ 0 THEN Length(US_Subfield:4 in Field) EQ 0
AND
IF {US_Subfield:5 in Field} MOD 1 NEQ 0 THEN Length(US_Subfield:6 in Field) EQ 0 AND Length(US_Subfield:7) EQ 0
AND
IF {US_Subfield:6 in Field} MOD 1 NEQ 0 THEN Length(US_Subfield:7 in Field) EQ 0
}
B*
Field: Geographic-Values-SubFields 2 to 87.7.32 番目の情報項目は、緯度の度の値 / LTD です。これは緯度の度を指定する値です。値は -90(を含む)から +90(を含む)の間でなければなりません。
3 番目の情報項目は、緯度の分の値 / LTM です。これは度の 1 分を指定する値です。値は 0(を含む)から 60(を含まない)の間でなければなりません。
4 番目の情報項目は、緯度の秒の値 / LTS です。これは分の 1 秒を指定する値です。整数は 0(を含む)から 60(を含まない)でなければなりません。
5 番目の情報項目は、経度の度の値 / LGD です。これは経度の度を指定する値です。値は -180(を含む)から
1-xx.998-Geo-Values-Sub2 to 8ForEach(Field ST FieldNumber(Field) EQ 998)
{
{US_Subfield:2 in Field} GTE -90 AND LTE 90
AND
{US_Subfield:3 in Field} GTE 0 AND LT 60
AND
{US_Subfield:4 in Field} GTE 0 AND LT 60
AND
{US_Subfield:5 in Field} GTE -180 AND LTE 180
AND
{US_Subfield:6 in Field} GTE 0 AND LT 60
AND
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
+180 (inclusive).
The sixth information item is the longitude minute value / LGM. It is a value that specifies a minute of a degree. The value shall be from 0 (inclusive) to 60 (exclusive).
The seventh information item is the longitude second value / LGS. This is a value that specifies a second of a minute. The integer shall be 0 (inclusive) to 60 (exclusive).
The eighth information item is elevation / ELE. It is expressed in meters. It is a numeric value. It is between -422 meters (Dead Sea) and 8848 meters (Mount Everest).
{US_Subfield:7 in Field} GTE 0 AND LT 60
AND
{US_Subfield:8 in Field} GTE -422 AND LTE 8848
}
Field: Geographic-Values-SubField 97.7.3, Table 4The ninth information item is the geodetic datum code / GDC10. It is an alphanumeric value of 3 to 6 characters in length. This information item is used to indicate which coordinate system was used to represent the values in information items 2 through 7. If no entry is made in this information item, then the basis for the values entered in the first eight information items shall be WGS84, the code for the World Geodetic Survey 1984 version - WGS 84 (G873). See Table 4 for values.1Oxx.998-Geo-Values-Sub9ForEach(Field ST FieldNumber(Field) EQ 998)
{
{US_Subfield:9 in Field} MO [ASCII(AIRY, AUST, BES, BESN, CLK66, CLK80, EVER, FIS60, FIS68, GRS67, HELM, HOUG, INT, KRAS, AIRYM, EVERM, FIS60M, SA69, WGS60, WGS66, WGS72, WGS84)]
OR
Length(US_Subfield:9 in Field) MO [3 to 6] AND Bytes(US_Subfield:9 in Field) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
OR
Length(US_Subfield:9 in Field) EQ 0
}
t-7B*
Field: Geographic-Values-SubField 107.7.3The tenth information item is the geographic coordinate universal transverse Mercator zone / GCM. It is an alphanumeric value of 5 characters.
• The first two characters represent the 6° wide UTM zone. Leading zeros are included.
• The third character is a letter designating the band of latitude.
• The fourth and fifth characters are a pair of letters identifying one of the 100,000-meter grid squares within the grid zone (UPS area).
1Oxx.998-Geo-Values-Sub10ForEach(Field ST FieldNumber(Field) EQ 998)
{
{Bytes:1 in US_Subfield:10 in Field} * 10 + {Bytes:2 in US_Subfield:10 in Field} GTE 1 AND LTE 60
AND
{Bytes:3 to 5 in US_Subfield:10 in Field } MO [ASCII(Cto X)] AND NOT MO [ASCII(I,O)]
}
t-8B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
+180(を含む)の間でなければなりません。
6 番目の情報項目は、経度の分の値 / LGM です。これは度の分の値を指定します。値は 0(を含む)から 60(を含まない)までです。
7 番目の情報項目は、経度の秒の値 / LGS です。これは分の秒の値を指定します。整数は 0(を含む)から 60(を含まない)までです。
8 番目の情報項目は、標高 / ELE です。メートルで表される数値で、-422 メートル(死海)から 8848 メートル(エベレスト)までです。
{US_Subfield:7 in Field} GTE 0 AND LT 60
AND
{US_Subfield:8 in Field} GTE -422 AND LTE 8848
}
Field: Geographic-Values-SubField 97.7.3, Table 49 番目の情報項目は、測地系コード / GDC10 です。長さ 3 から 6 文字の英数字の値です。この情報項目は、情報項目 2 から 7 の値を表すためにどの座標系が用いられたかを示します。この情報項目に入力がない場合、最初の 8 つの情報項目に入力された値の基準は、WGS84、すなわち World Geodetic Survey 1984 年版 - WGS 84(G873)のコードでなければなりません。値は表 4 を参照してください。1Oxx.998-Geo-Values-Sub9ForEach(Field ST FieldNumber(Field) EQ 998)
{
{US_Subfield:9 in Field} MO [ASCII(AIRY, AUST, BES, BESN, CLK66, CLK80, EVER, FIS60, FIS68, GRS67, HELM, HOUG, INT, KRAS, AIRYM, EVERM, FIS60M, SA69, WGS60, WGS66, WGS72, WGS84)]
OR
Length(US_Subfield:9 in Field) MO [3 to 6] AND Bytes(US_Subfield:9 in Field) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
OR
Length(US_Subfield:9 in Field) EQ 0
}
t-7B*
Field: Geographic-Values-SubField 107.7.310 番目の情報項目は、地理座標のユニバーサル横メルカトルゾーン / GCM です。5 文字の英数字の値です。
• 最初の 2 文字は、幅 6° の UTM ゾーンを表します。先頭のゼロも含まれます。
• 3 文字目は、緯度の帯を示す文字です。
• 4 文字目と 5 文字目は、グリッドゾーン内(UPS 領域)の 100,000 メートルのグリッド方眼のいずれかを識別する一対の文字です。
1Oxx.998-Geo-Values-Sub10ForEach(Field ST FieldNumber(Field) EQ 998)
{
{Bytes:1 in US_Subfield:10 in Field} * 10 + {Bytes:2 in US_Subfield:10 in Field} GTE 1 AND LTE 60
AND
{Bytes:3 to 5 in US_Subfield:10 in Field } MO [ASCII(Cto X)] AND NOT MO [ASCII(I,O)]
}
t-8B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1Oxx.998-Geo -Sub10-ValidZoneForEach(Field ST FieldNumber(Field) EQ 998)
{
{US_Subfield:10 in Field} MO [ValidZone]
}
t-8B*
Field: Geographic-Values-SubField 11 and 127.7.3The eleventh information item is the geographic coordinate universal transverse Mercator easting / GCE. It is an integer of 2-digits for 1 kilometer precision, 3-digits for 100 meter precision, 4-digits for 10 meter precision and 5-digits for 1 meter precision.
The twelfth information item is the geographic coordinate universal transverse Mercator northing / GCN. It is an integer of 2-digits for 1 kilometer precision, 3-digits for 100 meter precision, 4-digits for 10 meter precision and 5-digits for 1 meter precision.
2Dxx.998-Geo-Values-Sub11,12ForEach(Field ST FieldNumber(Field) EQ 998)
{
Length(US_Subfield:11,12 in Field) GTE 2 AND LTE 5
AND
Bytes(US_Subfield:11,12 in Field) MO [ASCII(0 to 9)]
}
B*
Field: Geographic-Values-SubField 137.7.3The thirteenth information item is optional. It is the geographic reference text /GRT. This information item is an alphanumeric entry of up to 150 characters. It is a free form text describing a street address or other physical location (such as ‘Corner of Washington and Madison, Geneva, NY’).1Oxx.998-Geo-Values-Sub13ForEach(Field ST FieldNumber(Field) EQ 998)
{
Length(US_Subfield:13 in Field) LTE 150
}
B*
Field: Geographic-Values-SubField 147.7.3A fourteenth optional information item geographic coordinate other system identifier / OSI allows for other coordinate systems. This information items specifies the system identifier. It is up to 10 characters in length. Examples are:
• MGRS (Military Grid Reference System)
• USNG (United States National Grid)
• GARS (Global Area Reference System)
1Oxx.998-Geo-Values-Sub14ForEach(Field ST FieldNumber(Field) EQ 998)
{
Length(US_Subfield:14 in Field) LTE 10
}
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1Oxx.998-Geo -Sub10-ValidZoneForEach(Field ST FieldNumber(Field) EQ 998)
{
{US_Subfield:10 in Field} MO [ValidZone]
}
t-8B*
Field: Geographic-Values-SubField 11 and 127.7.311 番目の情報項目は、地理座標のユニバーサル横メルカトル東距 / GCE です。1 キロメートルの精度では 2 桁、100 メートルの精度では 3 桁、10 メートルの精度では 4 桁、1 メートルの精度では 5 桁の整数です。
12 番目の情報項目は、地理座標のユニバーサル横メルカトル北距 / GCN です。1 キロメートルの精度では 2 桁、100 メートルの精度では 3 桁、10 メートルの精度では 4 桁、1 メートルの精度では 5 桁の整数です。
2Dxx.998-Geo-Values-Sub11,12ForEach(Field ST FieldNumber(Field) EQ 998)
{
Length(US_Subfield:11,12 in Field) GTE 2 AND LTE 5
AND
Bytes(US_Subfield:11,12 in Field) MO [ASCII(0 to 9)]
}
B*
Field: Geographic-Values-SubField 137.7.313 番目の情報項目は任意です。これは地理参照テキスト / GRT です。この情報項目は、最大 150 文字の英数字の入力です。番地やその他の物理的な場所(たとえば「Corner of Washington and Madison, Geneva, NY」)を記述する自由形式のテキストです。1Oxx.998-Geo-Values-Sub13ForEach(Field ST FieldNumber(Field) EQ 998)
{
Length(US_Subfield:13 in Field) LTE 150
}
B*
Field: Geographic-Values-SubField 147.7.314 番目の任意の情報項目である地理座標のその他の座標系の識別子 / OSI により、他の座標系を使えます。この情報項目は、座標系の識別子を指定します。長さは最大 10 文字です。例を次に示します。
• MGRS(Military Grid Reference System)
• USNG(United States National Grid)
• GARS(Global Area Reference System)
1Oxx.998-Geo-Values-Sub14ForEach(Field ST FieldNumber(Field) EQ 998)
{
Length(US_Subfield:14 in Field) LTE 10
}
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
• GEOREF (World Geographic Reference)
• LANDMARK landmark (e.g. hydant) and position relative to the landmark.
Field: Geographic-Values-SubField 157.7.3A fifteenth optional information item is the geographic coordinate other system value / OCV. It shall only be present if OSI is present in the record. It can be up to 126 characters in length. If OSI is LANDMARK, OCV is free text and may be up to 126 characters. For details on the formatting of OCV for the other coordinate systems shown in OSI as examples, see http://earth-info.nga.mil/GandG/coordsys/grids/referencesys.html1Dxx.998-Geo-Values-Sub15ForEach(Field ST FieldNumber(Field) EQ 998)
{
Length(US_Subfield:15 in Field) LTE 126
}
t-7B*
2Dxx.998-Geo-Cond-OCVForEach(Field ST FieldNumber(Field) EQ 998)
{
IF Present(US_Subfield:15 in Field) THEN Present(US_Subfield:14 in Field)
}
B*
Field: Impression-Values7.7.4.1, Table 5, 8.4.3, 8.9.3, 8.13.3, 8.14.3, 8.15.3, 8.19.3This field contains a code from Table 5 for how the friction ridge sample was collected. It has been expanded in this version of the standard to include plantars and unknowns.M[4,9,13,14,15,19].003-IMP<The test assertions for these types vary for this requirement, and therefore included under field testing for the specific Record Types.>t-2
Field: FGP-Values7.7.4.2, Table 6, 8.4.4, 8.9.5.9, 8.13.13, 8.14.13, 8.15.13, 8.19.13This field is used in Record types dealing with friction ridges. It specifies which friction ridge biometric sample was collected. Note that for codes 1-40 and 60-84, the Table 6 specifies recommended MAXIMUM width and height. (Individual implementation domains and application profiles may use different values.)
In previous versions of this standard, FGP was used for finger position, and PLP for palmprint position. They are now in one table, along with the codes added in the ANSI/NIST-ITL 1a-2009 amendment. New to this version, plantar codes are included in the table. In order to cover all of these cases, the name was changed to friction ridge generalized position / FGP.
M4.004, 9.134, [13,14,15,19].013-FGP<The test assertions for these types vary for this requirement, and therefore included under field testing for the specific Record Types.>t-2
Field: PPD Conditional7.7.4.3For exemplar fingerprints contained in Type-14 records, if the impression is known to be an entire joint image (EJI),2DType-14-Cond-FGP-PPDPresent(14.014) IFF Present(US_Subfield in 14.013 ST {US_Subfield} EQ 19)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
• GEOREF(World Geographic Reference)
• LANDMARK 目印(たとえば消火栓)と、その目印に対する相対位置を示すものです。
Field: Geographic-Values-SubField 157.7.315 番目の任意の情報項目は、地理座標のその他の座標系の値 / OCV です。レコードに OSI が存在する場合にのみ存在しなければなりません。長さは最大 126 文字です。OSI が LANDMARK の場合、OCV は自由形式のテキストで、最大 126 文字とすることができます。OSI に例として示された他の座標系の OCV の書式の詳細は、http://earth-info.nga.mil/GandG/coordsys/grids/referencesys.html を参照してください。1Dxx.998-Geo-Values-Sub15ForEach(Field ST FieldNumber(Field) EQ 998)
{
Length(US_Subfield:15 in Field) LTE 126
}
t-7B*
2Dxx.998-Geo-Cond-OCVForEach(Field ST FieldNumber(Field) EQ 998)
{
IF Present(US_Subfield:15 in Field) THEN Present(US_Subfield:14 in Field)
}
B*
Field: Impression-Values7.7.4.1, Table 5, 8.4.3, 8.9.3, 8.13.3, 8.14.3, 8.15.3, 8.19.3このフィールドには、摩擦隆線のサンプルがどのように採取されたかを示す、表 5 のコードを含みます。この版の標準では、足底と不明を含むように拡張されました。M[4,9,13,14,15,19].003-IMP<この要件に対する試験アサーションはレコードタイプによって異なるため、各レコードタイプのフィールド試験に含まれます。>t-2
Field: FGP-Values7.7.4.2, Table 6, 8.4.4, 8.9.5.9, 8.13.13, 8.14.13, 8.15.13, 8.19.13このフィールドは、摩擦隆線を扱うレコードタイプで用います。どの摩擦隆線の生体サンプルが採取されたかを指定します。コード 1-40 および 60-84 については、表 6 で推奨される最大の幅と高さが規定されていることに注意してください。(個々の実装ドメインおよびアプリケーションプロファイルは、異なる値を用いてもよいです。)
この標準の以前の版では、指の位置には FGP、掌紋の位置には PLP が用いられていました。これらは現在、ANSI/NIST-ITL 1a-2009 の改訂で追加されたコードとともに、1 つの表にまとめられています。この版では新たに、足底のコードが表に含まれます。これらすべての場合を扱うため、名称は摩擦隆線の一般化位置 / FGP に変更されました。
M4.004, 9.134, [13,14,15,19].013-FGP<この要件に対する試験アサーションはレコードタイプによって異なるため、各レコードタイプのフィールド試験に含まれます。>t-2
Field: PPD Conditional7.7.4.3タイプ 14 のレコードに含まれるエグゼンプラの指紋で、その印象が関節全体の画像(EJI)、2DType-14-Cond-FGP-PPDPresent(14.014) IFF Present(US_Subfield in 14.013 ST {US_Subfield} EQ 19)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
full finger view (FFV), or extreme tip (TIP), then Field 14.013: Friction ridge generalized position / FGP shall be set to 19, and Field 14.014: Print position descriptors / PPD shall be specified; Field 14.015: Print position coordinates /PPC may be (optionally) specified.AND
IF Present(14.015) THEN Present(US_Subfield in 14.013 ST {US_Subfield} EQ 19)
Field: SPD,PPC Conditional7.7.4.3For latent prints contained in Type-13 records, if all or part of the impression should be compared against the medial or proximal segments or the extreme tips, then Field 13.013: Friction ridge generalized position / FGP shall be set to 19, and Field 13.014: Search position descriptors / SPD shall be specified; Field 13.015: Print position coordinates / PPC may be (optionally) specified.2DType-13-Cond-FGP-SPD-PPCPresent(13.014) IFF Present(US_Subfield in 13.013 ST {US_Subfield} EQ 19)
AND
IF Present(13.015) THEN Present(US_Subfield in 13.013 ST {US_Subfield} EQ 19)
B*
Field: SPD,PPD Values7.7.4.3, Table 6, Table7The position descriptor, in Field 13.014: Search position descriptors / SPD or Field 14.014: Print position descriptors / PPD contains two mandatory information items:
For a Type-13 record (latent prints), the first information item (probable decimal finger position code / PDF) (0-10, 16 or 17) is taken from Table 6. A “0” indicates that all the fingers of a possible candidate should be searched. For a Type-14 record (known exemplars), the first information item is the friction ridge generalized position / FGP. It is also taken from Table 6 with a value of 1 to 10, inclusive or 16 or 17.
The second information item (finger image code / FIC) is the code taken from Table 7 to indicate the portion of the database to search. Full-length finger joint images use codes FV1 through FV4. Figure 2 is an illustration of the Entire Joint Image for a middle finger with each of the full finger views and constituent parts identified. Multiple portions of the EJI may be listed in a separate subfield.
1D13.014-Subfield 1-PDFForEach(RS_Subfield in 13.014)
{
{US_Subfield:1 in RS_Subfield} MO [0 to 10, 16,17]
}
B*
1D14.014-Subfield 1-FGPForEach(RS_Subfield in 14.014)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16,17]
}
B*
1D[13,14].014-Subfield 2-FICForEach(RS_Subfield in [13,14].014)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII( EJI,TIP,FV1,FV2,FV3,FV4,PRX,DST,MED)]
}
B*
Field: PPC-7.7.4.4,When used, Field 13.015: Print position1O[13,14].015Count(RS_Subfields in [13,14].015) MO [1 to 12]B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
指全体のビュー(FFV)、または指先端(TIP)であることがわかっている場合、フィールド 14.013: Friction ridge generalized position / FGP を 19 に設定しなければならず、フィールド 14.014: Print position descriptors / PPD を指定しなければなりません。フィールド 14.015: Print position coordinates /PPC は(任意で)指定してもよいです。AND
IF Present(14.015) THEN Present(US_Subfield in 14.013 ST {US_Subfield} EQ 19)
Field: SPD,PPC Conditional7.7.4.3タイプ 13 のレコードに含まれる遺留指紋で、印象の全体または一部を中節部もしくは基節部、または指先端と照合すべき場合、フィールド 13.013: Friction ridge generalized position / FGP を 19 に設定しなければならず、フィールド 13.014: Search position descriptors / SPD を指定しなければなりません。フィールド 13.015: Print position coordinates / PPC は(任意で)指定してもよいです。2DType-13-Cond-FGP-SPD-PPCPresent(13.014) IFF Present(US_Subfield in 13.013 ST {US_Subfield} EQ 19)
AND
IF Present(13.015) THEN Present(US_Subfield in 13.013 ST {US_Subfield} EQ 19)
B*
Field: SPD,PPD Values7.7.4.3, Table 6, Table7フィールド 13.014: Search position descriptors / SPD またはフィールド 14.014: Print position descriptors / PPD の位置記述子には、2 つの必須の情報項目が含まれます。
タイプ 13 のレコード(遺留指紋)では、最初の情報項目(可能性の高い 10 進の指位置コード / PDF)(0-10、16 または 17)は表 6 から取ります。「0」は、候補となりうる人のすべての指を検索すべきことを示します。タイプ 14 のレコード(既知のエグゼンプラ)では、最初の情報項目は摩擦隆線の一般化位置 / FGP です。これも表 6 から取り、値は 1 から 10(を含む)、または 16 もしくは 17 です。
2 番目の情報項目(指画像コード / FIC)は、データベースのどの部分を検索するかを示すために表 7 から取るコードです。指全長の関節画像には、コード FV1 から FV4 を用います。図 2 は、中指の関節全体の画像と、各指全体のビューおよび構成部分を示した図です。EJI の複数の部分を、別個のサブフィールドに列挙してもよいです。
1D13.014-Subfield 1-PDFForEach(RS_Subfield in 13.014)
{
{US_Subfield:1 in RS_Subfield} MO [0 to 10, 16,17]
}
B*
1D14.014-Subfield 1-FGPForEach(RS_Subfield in 14.014)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16,17]
}
B*
1D[13,14].014-Subfield 2-FICForEach(RS_Subfield in [13,14].014)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII( EJI,TIP,FV1,FV2,FV3,FV4,PRX,DST,MED)]
}
B*
Field: PPC-7.7.4.4,使用する場合、フィールド 13.015: Print position1O[13,14].015Count(RS_Subfields in [13,14].015) MO [1 to 12]B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Subfield OccurrencesTable7, Table 66, Table 67coordinates / PPC or Field 14.015: Print position coordinates / PPC shall consist of six (6) mandatory information items describing the type or portion of the image contained in this record and its location within an EJI… Individual full finger or segment definitions may be repeated as repeating sets of information items.- PPC-Subfield OccurrencesAND
ForEach(RS_Subfield in [13,14].015)
{
Count(US_Subfields in RS_Subfield) EQ 6
}
Field: PPC-Subfield 17.7.4.4, Table7, Table 66, Table 67The first information item is the full finger view / FVC with values of “FV1” through “FV4”. Values of “FV1” to “FV4” specify the perspective for each full finger view. For the case of a fingertip, the first information item shall be “TIP”. FVC will contain the code “NA” if only a proximal, distal or medial segment is available.1M⇑[13,14].015- FVCForEach(RS_Subfield in [13,14].015)
{
{US_Subfield:1 in RS_Subfield} MO [ASCII(FV1, FV2, FV3, FV4, TIP, NA)]
}
B*
Field: PPC-Subfield 27.7.4.4, Table7, Table 66, Table 67The second information item is used to identify the location of a segment / LOS within a full finger view. LOS will contain the not applicable code “NA” if the image portion refers to a full finger view, tip or to the entire joint image locations. Otherwise, it shall contain “PRX”, “DST”, “MED” for a proximal, distal, or medial segment, respectively.1M⇑[13,14].015- LOSForEach(RS_Subfield in [13,14].015)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII( PRX, DST, MED, NA)]
}
B*
Field: PPC-Subfields 3,47.7.4.4, Table7, Table 66, Table 67The third information item is the left horizontal coordinate / LHC. It is the horizontal offset in pixels to the left edge of the bounding box relative to the origin positioned in the upper left corner of the image.
The fourth information item is the right horizontal coordinate / RHC. It is the horizontal offset in pixels to the right edge of the bounding box relative to the origin positioned in the upper left corner of the image.
2M⇑13.015-LHC,RHCForEach(RS_Subfield in 13.015)
{
{US_Subfield:3,4 in RS_Subfield} GTE 1 AND LTE {13.006}
}
B*
2M⇑14.015-LHC,RHCForEach(RS_Subfield in 14.015)
{
{US_Subfield:3,4 in RS_Subfield} GTE 1 AND LTE {14.006}
}
B*
Field: PPC-Subfields 5,67.7.4.4, Table7, Table 66, Table 67The fifth information item is the top vertical coordinate / TVC is the vertical offset (pixel counts down) to the top of the bounding box.2M⇑13.015-TVC,BVCForEach(RS_Subfield in 13.015)
{
{US_Subfield:5,6 in RS_Subfield} GTE 1 AND LTE {13.007}
}
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Subfield OccurrencesTable7, Table 66, Table 67coordinates / PPC またはフィールド 14.015: Print position coordinates / PPC は、このレコードに含まれる画像の種類または部分と、EJI 内での位置を記述する 6 つの必須情報項目で構成されなければなりません…個々の指全体またはセグメントの定義は、情報項目を繰り返し組み合わせて記述してもよいです。- PPC-Subfield OccurrencesAND
ForEach(RS_Subfield in [13,14].015)
{
Count(US_Subfields in RS_Subfield) EQ 6
}
Field: PPC-Subfield 17.7.4.4, Table7, Table 66, Table 67最初の情報項目は、値が「FV1」から「FV4」の指全体のビュー / FVC です。値「FV1」から「FV4」は、各指全体のビューの視点を指定します。指先端の場合、最初の情報項目は「TIP」でなければなりません。近位、遠位、または中間セグメントしか得られない場合、FVC にはコード「NA」が入ります。1M⇑[13,14].015- FVCForEach(RS_Subfield in [13,14].015)
{
{US_Subfield:1 in RS_Subfield} MO [ASCII(FV1, FV2, FV3, FV4, TIP, NA)]
}
B*
Field: PPC-Subfield 27.7.4.4, Table7, Table 66, Table 672 番目の情報項目は、指全体のビュー内でのセグメントの位置 / LOS を識別するために用います。画像部分が指全体のビュー、指先端、または関節全体の画像の位置を指す場合、LOS には適用不可のコード「NA」が入ります。それ以外の場合、近位、遠位、中間セグメントについて、それぞれ「PRX」、「DST」、「MED」を含めなければなりません。1M⇑[13,14].015- LOSForEach(RS_Subfield in [13,14].015)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII( PRX, DST, MED, NA)]
}
B*
Field: PPC-Subfields 3,47.7.4.4, Table7, Table 66, Table 673 番目の情報項目は、左の水平座標 / LHC です。画像の左上隅に置いた原点に対する、バウンディングボックスの左端までの水平方向のオフセットをピクセルで表したものです。
4 番目の情報項目は、右の水平座標 / RHC です。画像の左上隅に置いた原点に対する、バウンディングボックスの右端までの水平方向のオフセットをピクセルで表したものです。
2M⇑13.015-LHC,RHCForEach(RS_Subfield in 13.015)
{
{US_Subfield:3,4 in RS_Subfield} GTE 1 AND LTE {13.006}
}
B*
2M⇑14.015-LHC,RHCForEach(RS_Subfield in 14.015)
{
{US_Subfield:3,4 in RS_Subfield} GTE 1 AND LTE {14.006}
}
B*
Field: PPC-Subfields 5,67.7.4.4, Table7, Table 66, Table 675 番目の情報項目は、上部の垂直座標 / TVC で、バウンディングボックスの上端までの垂直方向のオフセット(下向きに数えたピクセル数)です。2M⇑13.015-TVC,BVCForEach(RS_Subfield in 13.015)
{
{US_Subfield:5,6 in RS_Subfield} GTE 1 AND LTE {13.007}
}
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
The sixth information item is the bottom vertical coordinate / BVC. It is the vertical offset from the upper left corner of the image down to the bottom of the bounding box. It is counted in pixels.2M⇑14.015-TVC,BVCForEach(RS_Subfield in 14.015)
{
{US_Subfield:5,6 in RS_Subfield} GTE 1 AND LTE {14.007}
}
B*
Field: SAP Conditional7.7.5, 8.10.13SAP codes are mandatory in Type-10 records with a face image, optional in Type-14 records, and optional in Type-17 records… The Subject Acquisition Profile (SAP) is a mandatory field when Field 10.003: Image type / IMT contains “FACE”. Otherwise, it shall not be entered.2D10.013-SAP ConditionalPresent(10.013) IFF
{10.003} EQ ASCII (FACE)
B
Field: SAP Values7.7.5.1, Table 8Field 10.013: Subject acquisition profile / SAP is used to indicate the SAP level code for face as indicated in Table 8. The SAP codes 32, 42 and 52 are new to this version of the standard.1D10.013-SAP Values{10.013} MO [0,1,10-15,20,30,32,40,42,50-52]B
Field: SAP-Level Requirements7.7.5.1.1 to 7.7.5.1.10, Table 9, Annex E<Sections 7.7.5.1.1 to 7.7.5.1.10 describe requirements for the image for various SAP Levels.>3D10.013-SAP Levels<Not Tested. Determining the condition under which the image was captured to verify the SAP Level is not feasible at this time.>t-9
Field: FAP Values7.7.5.2, Table 10The profile levels for fingerprint acquisition are optional and are based upon those listed in the Mobile ID Best Practice Recommendation. They are entered in Field 14.031:
Subject acquisition profile – fingerprint / FAP, which is new to this version of the standard.
1O14.031-FAP Values{14.031} MO [10,20,30,40,50,60]B
Field: FAP-Level Requirements7.7.5.2, Table 10<Section 7.7.5.2 and Table 10 describe requirements for the image for various FAP Levels.>3O14.031-SAP Levels<Not Tested. Determining the condition under which the image was captured to verify the FAP Level is not feasible at this time.>t-9
Field: IAP Values7.7.5.3, Table 71The profile levels for iris acquisition, which are new to this version of the standard, are optional and are based upon those listed in the Mobile ID Best Practice Recommendation (BPR) (See Annex G: Bibliography) . They are entered in Field 17.031: Subject acquisition profile – iris / IAP.1O17.031-IAP Values{17.031} MO [20,30,40]B
Field: IAP-Level7.7.5.3<Section 7.7.5.3 describes requirements for the image for various IAP Levels.>3M17.031-IAP Levels<Not Tested. Determining the condition under which the image was captured to verify the IAPt-9
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
6 番目の情報項目は、下の垂直座標 / BVC です。画像の左上隅からバウンディングボックスの下端までの垂直方向のオフセットです。ピクセルで数えます。2M⇑14.015-TVC,BVCForEach(RS_Subfield in 14.015)
{
{US_Subfield:5,6 in RS_Subfield} GTE 1 AND LTE {14.007}
}
B*
Field: SAP Conditional7.7.5, 8.10.13SAP コードは、顔画像を含むタイプ 10 のレコードでは必須であり、タイプ 14 のレコードでは任意、タイプ 17 のレコードでも任意です…Subject Acquisition Profile(SAP)は、フィールド 10.003: Image type / IMT に「FACE」が含まれる場合は必須のフィールドです。それ以外の場合は、入力してはなりません。2D10.013-SAP ConditionalPresent(10.013) IFF
{10.003} EQ ASCII (FACE)
B
Field: SAP Values7.7.5.1, Table 8フィールド 10.013: Subject acquisition profile / SAP は、表 8 に示す顔の SAP レベルコードを示すために用います。SAP コード 32、42、および 52 は、この版の標準で新規です。1D10.013-SAP Values{10.013} MO [0,1,10-15,20,30,32,40,42,50-52]B
Field: SAP-Level Requirements7.7.5.1.1 to 7.7.5.1.10, Table 9, Annex E<7.7.5.1.1 節から 7.7.5.1.10 節に、各 SAP レベルの画像に対する要件が記載されています。>3D10.013-SAP Levels<試験しません。SAP レベルを検証するために画像が取得された条件を判定することは、現時点では実現できません。>t-9
Field: FAP Values7.7.5.2, Table 10指紋取得のプロファイルレベルは任意であり、Mobile ID Best Practice Recommendation に挙げられたものに基づいています。これらは、この版の標準で新しく加わったフィールド 14.031:
Subject acquisition profile – fingerprint / FAP に入力します。
1O14.031-FAP Values{14.031} MO [10,20,30,40,50,60]B
Field: FAP-Level Requirements7.7.5.2, Table 10<7.7.5.2 節と表 10 に、各 FAP レベルの画像に対する要件が記載されています。>3O14.031-SAP Levels<試験しません。FAP レベルを検証するために画像が取得された条件を判定することは、現時点では実現できません。>t-9
Field: IAP Values7.7.5.3, Table 71虹彩取得のプロファイルレベルは、この版の標準で新規であり、任意で、Mobile ID Best Practice Recommendation(BPR)(附属書 G: Bibliography を参照)に挙げられたものに基づいています。これらはフィールド 17.031: Subject acquisition profile – iris / IAP に入力します。1O17.031-IAP Values{17.031} MO [20,30,40]B
Field: IAP-Level7.7.5.3<7.7.5.3 節に、各 IAP レベルの画像に対する要件が記載されています。>3M17.031-IAP Levels<試験しません。画像が取得された条件を判定して IAPt-9
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
RequirementsLevel is not feasible at this time.>
Field: Resolution Tolerance7.7.6.1, 7.7.6.3, Table 11For Appendix F certified devices, resolution accuracy shall not vary more than 1% from the class resolution. A class resolution of 19.69 ppmm (500 ppi) has a lower bound of 19.49 ppmm (495ppi) and an upper bound of 19.89 ppmm (505ppi).
For Personal Identity Verification (PIV) certified devices with fingerprint subject application profile (FAP) Levels 10 to 40 only resolution accuracy shall not vary more than 2% from the class Resolution. For example, a class resolution of 19.69 ppmm (500 ppi) has a lower bound of 19.30 ppmm (490ppi) and an upper bound of 20.08 ppmm (510ppi).
Tolerance requirements shall apply to the class and nominal resolution requirements throughout this document.
This transmitting resolution does not have to be the same as the scanning resolution. However, the transmitting resolution shall be within the range of permissible resolution values for that record type.
1MField-Resolution Tolerance<This requirement specifies a tolerance for all resolution values expressed throughout the standard. If there is a resolution requirement for a type, the resolution must follow the 1% or 2% tolerance as described in the standard. This requirement will be applied to each applicable resolution requirement.>t-2
Field: Image-Coordinates7.7.6.2Each image formatted in accordance with this standard shall appear to have been captured in an upright position and approximately centered horizontally in the field of view…3MImages-Coordinates<Not directly tested, but this convention is used when testing for conformance in each of the assertions related to images>t-2
Field: NSR Conditional7.7.6.2.1, Table 11If Type-4 records are included in the transaction, Field 1.011 Native scanning resolution / NSR contains five characters specifying the native scanning resolution in pixels per millimeter. It is expressed as two numeric characters followed by a decimal point and two more numeric characters (e.g. 19.69). This field is set to “00.00” if no Type-4 records are present in the transaction. With the deprecation of Record Types-3, 5 and 6, NSR only directly1M1.011-NSR-LengthLength(1.011) EQ 5B
1M1.011-NSR-ValuesBytes:1,2,4,5 in 1.011 MO [0 to 9]
AND
Byte: 3 in 1.011 EQ “.”
B
2M1.011-NSR-ConditionalIF NOT Present(Record ST Type(Record) EQ 4) THEN
{1.011} EQ 00.00
T
2MNIEM-NSR-ConditionalIF NOT Present(XElm(itl:PackageHighResolutionGrayScaleImageRecord))
THEN
X
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Requirementsレベルを検証することは、現時点では実現できません。>
Field: Resolution Tolerance7.7.6.1, 7.7.6.3, Table 11付録 F の認証を受けた装置では、解像度の精度はクラス解像度から 1% を超えて変動してはなりません。クラス解像度 19.69 ppmm(500 ppi)の下限は 19.49 ppmm(495ppi)、上限は 19.89 ppmm(505ppi)です。
指紋の対象者アプリケーションプロファイル(FAP)のレベル 10 から 40 のみに対応する個人識別検証(PIV)認証装置では、解像度の精度はクラス解像度から 2% を超えて変動してはなりません。たとえば、クラス解像度 19.69 ppmm(500 ppi)の下限は 19.30 ppmm(490ppi)、上限は 20.08 ppmm(510ppi)です。
許容差の要件は、この文書全体を通じて、クラス解像度および公称解像度の要件に適用しなければなりません。
この送信解像度は、スキャン解像度と同じである必要はありません。ただし、送信解像度は、そのレコードタイプで許容される解像度の値の範囲内でなければなりません。
1MField-Resolution Tolerance<この要件は、標準全体で表現されるすべての解像度の値に対する許容差を規定します。あるタイプに解像度の要件がある場合、解像度は、標準に記載された 1% または 2% の許容差に従わなければなりません。この要件は、該当する各解像度の要件に適用されます。>t-2
Field: Image-Coordinates7.7.6.2この標準に従って書式化された各画像は、直立した位置で取得され、視野内で水平方向におおむね中央に位置しているように見えなければなりません…3MImages-Coordinates<直接は試験しませんが、この規約は、画像に関連する各アサーションで適合性を試験する際に用いられます>t-2
Field: NSR Conditional7.7.6.2.1, Table 11タイプ 4 のレコードが取引に含まれる場合、フィールド 1.011 Native scanning resolution / NSR には、ネイティブのスキャン解像度を 1 ミリメートルあたりのピクセル数で指定する 5 文字が含まれます。これは、2 桁の数字、小数点、さらに 2 桁の数字で表します(たとえば 19.69)。取引にタイプ 4 のレコードが存在しない場合、このフィールドは「00.00」に設定します。レコードタイプ 3、5、6 が廃止されたため、NSR は直接的には1M1.011-NSR-LengthLength(1.011) EQ 5B
1M1.011-NSR-ValuesBytes:1,2,4,5 in 1.011 MO [0 to 9]
AND
Byte: 3 in 1.011 EQ “.”
B
2M1.011-NSR-ConditionalIF NOT Present(Record ST Type(Record) EQ 4) THEN
{1.011} EQ 00.00
T
2MNIEM-NSR-ConditionalIF NOT Present(XElm(itl:PackageHighResolutionGrayScaleImageRecord))
THEN
X
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
applies to Record Type-4 in this version of the standard. New to this version of the standard, NSR does not apply to Type-7 records, unless specified as such by an implementation domain.
Record Type-14 shall be used if scanning a fingerprint image at the 1000 ppi class or above.
It can also be used for the 500 ppi class.Record Type-4 shall not be used for anything but the 500 ppi class.
{XElm(biom:NativeScanningResolutionValue) in XElm(itl:PackageInformationRecord)} EQ 00.00
2M1.011-NSR-Type4 500 ppi Only{1.011} GTE 19.30 AND LTE 20.08B
Field: Exemplar Scan Resolution7.7.6.2.1Exemplar images shall have a minimum class scanning resolution of 500 ppi. The migration path to higher scanning resolutions for image capturing devices with a native scanning resolution of the 500 ppi class shall be at a rate of 100% of the current native scanning resolution. Capture devices with native scanning resolutions not in step with this migration path shall provide (through subsampling, scaling, or interpolating downward) a nominal resolution that matches the next lower interval in the migration path. For example, a device with native scanning resolution of 47.24 ppmm (1200 ppi) shall provide a class resolution of 39.37 ppmm (1000 ppi). The scanner resolution is specified for Record Types 14, 15, 16, 17, 19 and 20 using Scanned horizontal pixel scale / SHPS (See Section 7.7.8.7) and Scanned vertical pixel scale / SVPS (See Section 7.7.8.8). These Record Types can handle all resolutions, and are thus called variable-resolution image records.2MFields-Exemplar Valid Scan Resolutions<Scanning resolutions for Record Types 14,15,16,17,19 and 20 must migrate at a rate of 100% with a minimum of 500 ppi. These assertions are included under field testing for the specific Record Types.>t-2
Field: Latent Resolution7.7.6.2.2, 7.7.6.1Latent images should have a minimum class scanning resolution of 1000 ppi. Record Type-13 specifies resolution using Scanned horizontal pixel scale / SHPS (See Section 7.7.8.7) and Scanned vertical pixel scale / SVPS (See Section 7.7.8.8). Record Type-13 can handle all resolutions, and is thus called a variable-resolution image record.2MFields-Latent Valid Scan ResolutionsIF {13.008} EQ 1 THEN
{13.016} AND {13.017} GTE 990
AND
IF {13.008} EQ 2 THEN
{13.016} AND {13.017} GTE 390
B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
この版の標準のレコードタイプ 4 にのみ適用されます。この版の標準で新しく、NSR は、実装ドメインによって指定されない限り、タイプ 7 のレコードには適用されません。
1000 ppi クラス以上で指紋画像をスキャンする場合は、レコードタイプ 14 を用いなければなりません。
500 ppi クラスにも使えます。レコードタイプ 4 は、500 ppi クラス以外に使用してはなりません。
{XElm(biom:NativeScanningResolutionValue) in XElm(itl:PackageInformationRecord)} EQ 00.00
2M1.011-NSR-Type4 500 ppi Only{1.011} GTE 19.30 AND LTE 20.08B
Field: Exemplar Scan Resolution7.7.6.2.1エグゼンプラ画像は、最小のクラススキャン解像度が 500 ppi でなければなりません。ネイティブのスキャン解像度が 500 ppi クラスの画像取得装置における、より高いスキャン解像度への移行経路は、現在のネイティブのスキャン解像度の 100% の割合でなければなりません。ネイティブのスキャン解像度がこの移行経路と合致しない取得装置は、(サブサンプリング、スケーリング、または下方への補間を通じて)移行経路上の次に低い間隔と一致する公称解像度を提供しなければなりません。たとえば、ネイティブのスキャン解像度が 47.24 ppmm(1200 ppi)の装置は、クラス解像度 39.37 ppmm(1000 ppi)を提供しなければなりません。スキャナーの解像度は、レコードタイプ 14、15、16、17、19、および 20 について、Scanned horizontal pixel scale / SHPS(7.7.8.7 節を参照)と Scanned vertical pixel scale / SVPS(7.7.8.8 節を参照)を用いて指定されます。これらのレコードタイプはあらゆる解像度を扱えるため、可変解像度の画像レコードと呼ばれます。2MFields-Exemplar Valid Scan Resolutions<レコードタイプ 14、15、16、17、19、および 20 のスキャン解像度は、最小 500 ppi で 100% の割合で移行しなければなりません。これらのアサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Field: Latent Resolution7.7.6.2.2, 7.7.6.1潜在指紋画像は、最小のクラススキャン解像度が 1000 ppi であるべきです。レコードタイプ 13 は、Scanned horizontal pixel scale / SHPS(7.7.8.7 節を参照)と Scanned vertical pixel scale / SVPS(7.7.8.8 節を参照)を用いて解像度を指定します。レコードタイプ 13 はあらゆる解像度を扱えるため、可変解像度の画像レコードと呼ばれます。2MFields-Latent Valid Scan ResolutionsIF {13.008} EQ 1 THEN
{13.016} AND {13.017} GTE 990
AND
IF {13.008} EQ 2 THEN
{13.016} AND {13.017} GTE 390
B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
…, resolution accuracy shall not vary more than 1% from the class resolution.
Field: Transmitting Resolution Required7.7.6.3Each image to be exchanged shall have a specific resolution associated with the transmitted data. This transmitting resolution does not have to be the same as the scanning resolution.
However, the transmitting resolution shall be within the range of permissible resolution values for that record type.
MFields-Tx Resolution Required Type4<The test assertions are included under field testing for the respective record types.>t-2
Field: Type4 NTR7.7.6.3.1Field 1.012 Nominal resolution / NTR shall specify the transmitting resolution in pixels per millimeter. It is expressed as two numeric characters followed by a decimal point and two more numeric characters (e.g. 19.69). The transmitting resolution shall be within the range 19.30 ppmm (490 ppi) to 20.08 ppmm (510 ppi) for a Type-4 record . This range reflects the 2% deviance from 500 ppi allowed for PIV certified devices. (SeeTable 11). For example, a sensor that scans natively at 508 ppi would list both NSR and NTR as 20 ppmm ( = 508 ppi). These images should not be sampled down to exactly 500 ppi. This field is set to “00.00” if no Type-4 records are present in the transaction. Given that the transmitting resolution shall not be greater than the scanning resolution, images meant for identification applications, such as those from Appendix F certified devices (See Table 11) are restricted to a 1% deviance from 500 ppi.1M1.012-NTR-LengthLength(1.012) EQ 5B
1M1.012-NTR-ValuesBytes:1,2,4,5 in 1.012 MO [0 to 9]
AND
Byte: 3 in 1.012 EQ “.”
B
2M1.012-NTR-ConditionalIF NOT Present(Record ST Type(Record) EQ 4) THEN
{1.012} EQ 00.00
T
2MNIEM-NTR-ConditionalIF NOT Present(XElm(itl:PackageHighResolutionGrayScaleImageRecord))
THEN {XElm(biom:NominalTransmittingResolutionValue) in XElm(itl:PackageInformationRecord)} EQ 00.00
X
2M1.012-NTR 500 ppi{1.012} GTE 19.30 AND LTE 20.08B
2M1.012-NTR LTE NSR{1.012} LTE {1.011}B
Field: Variable Resolution THPS,TVPS7.7.6.3.2For variable-resolution friction ridge images (those in Record Types 13, 14, 15, 19 and possibly in Record Types 16 and 20), the transmitting resolution shall be at least as great as the class resolution of 500 ppi. There is no upper limit on the variable-resolution rate for transmission. However, the transmitting resolution shall not be greater than the scanning resolution. For variable resolution records, the Transmitted horizontal pixelMFields-VarResolution<The test assertions are included under field testing for the respective record types.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
…、解像度の精度が、クラス解像度から 1% を超えて変動してはなりません。
Field: Transmitting Resolution Required7.7.6.3交換する各画像には、送信データに関連付けられた特定の解像度がなければなりません。この送信解像度は、スキャン解像度と同じである必要はありません。
ただし、送信解像度は、そのレコードタイプで許容される解像度の値の範囲内でなければなりません。
MFields-Tx Resolution Required Type4<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Field: Type4 NTR7.7.6.3.1フィールド 1.012 Nominal resolution / NTR は、送信解像度を 1 ミリメートルあたりのピクセル数で指定しなければなりません。これは、2 桁の数字、小数点、さらに 2 桁の数字で表します(たとえば 19.69)。タイプ 4 のレコードの場合、送信解像度は 19.30 ppmm(490 ppi)から 20.08 ppmm(510 ppi)の範囲内でなければなりません。この範囲は、PIV の認証を受けた装置に認められる、500 ppi からの 2% の偏差を反映しています(表 11 を参照)。たとえば、ネイティブで 508 ppi でスキャンするセンサーは、NSR と NTR の両方を 20 ppmm(= 508 ppi)と記載します。これらの画像を、ちょうど 500 ppi にダウンサンプリングすべきではありません。取引にタイプ 4 のレコードが存在しない場合、このフィールドは「00.00」に設定します。送信解像度がスキャン解像度を超えてはならないことから、識別用途を意図した画像(付録 F の認証を受けた装置のものなど(表 11 を参照))は、500 ppi からの 1% の偏差に制限されます。1M1.012-NTR-LengthLength(1.012) EQ 5B
1M1.012-NTR-ValuesBytes:1,2,4,5 in 1.012 MO [0 to 9]
AND
Byte: 3 in 1.012 EQ “.”
B
2M1.012-NTR-ConditionalIF NOT Present(Record ST Type(Record) EQ 4) THEN
{1.012} EQ 00.00
T
2MNIEM-NTR-ConditionalIF NOT Present(XElm(itl:PackageHighResolutionGrayScaleImageRecord))
THEN {XElm(biom:NominalTransmittingResolutionValue) in XElm(itl:PackageInformationRecord)} EQ 00.00
X
2M1.012-NTR 500 ppi{1.012} GTE 19.30 AND LTE 20.08B
2M1.012-NTR LTE NSR{1.012} LTE {1.011}B
Field: Variable Resolution THPS,TVPS7.7.6.3.2可変解像度の摩擦隆線画像(レコードタイプ 13、14、15、19、およびおそらくレコードタイプ 16 と 20 のもの)では、送信解像度は、少なくともクラス解像度 500 ppi と同じ大きさでなければなりません。送信における可変解像度の割合に上限はありません。ただし、送信解像度がスキャン解像度を超えてはなりません。可変解像度のレコードでは、Transmitted horizontal pixelMFields-VarResolution<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
scale / THPS and the Transmitted vertical pixel scale / TVPS shall be specified. (See Section 7.7.8).
Field: Sample Quality Occurrences7.7.7Many of the Record Types contain optional quality metric information. In addition to the three information items described here, the field may contain other information items. Each of the information items is contained in a set. Multiple sets of information items may be present, each indicating a different quality algorithm, up to a maximum of 9 times. Fields using this structure are:
-Field 9.135: M1 friction ridge quality data / FQD
-Field 9.316: EFS friction ridge quality metric / FQM
-Field 10.024: Subject quality score / SQS
-Field 13.024: Latent quality metric / LQM
-Field 14.023: Segmentation quality metric / SQM
-Field 14.024: Fingerprint quality metric / FQM
-Field 15.024: Friction ridge quality metric / FQM
-Field 16.024: User-defined image quality metric / FQM
-Field 17.024: Image quality score / IQS
-Field 19.024: Friction ridge - plantar print quality metric / FQM
-Field 99.102: Biometric data quality / BDQ
1-Fields-Sample Quality Subfield OccurrencesForEach( Field in [9.135,9.316,10.024,13.024,14.023,14.024,15.024,16.024,17.024,19.024, 99.102])
{
Count(RS_Subfields) LTE 9
}
B*
Field: Sample Quality Subfield 17.7.7The first information item shall be a quantitative expression of the predicted matching performance of the biometric sample, which is a quality value / QVU. This information item shall contain the integer image quality score between 0 and 100 (inclusive) assigned to the image data by a quality algorithm19. Higher values Partindicate better quality. An entry of “255” shall indicate a failed attempt to calculate a quality score. An entry of “254” shall indicate that no attempt to calculate a quality score was made.1-Fields-Sample Quality QVUForEach( Field in
[9.135,9.316,10.024, 16.024,17.024, 99.102])
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:1 in RS_Subfield} MO [0 to 100, 254,255]
}
}
AND
ForEach( Field in
[13.024, 14.023, 14.024, 15.024, 19.024])
{
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
scale / THPS と Transmitted vertical pixel scale / TVPS を指定しなければなりません。(7.7.8 節を参照。)
Field: Sample Quality Occurrences7.7.7レコードタイプの多くには、任意の品質メトリック情報が含まれます。ここで説明する 3 つの情報項目に加えて、このフィールドにはほかの情報項目を含めてもよいです。各情報項目は組に含まれます。情報項目の組は複数存在してもよく、それぞれが異なる品質アルゴリズムを示し、最大 9 回まで存在できます。この構造を用いるフィールドは次のとおりです。
-Field 9.135: M1 friction ridge quality data / FQD
-Field 9.316: EFS friction ridge quality metric / FQM
-Field 10.024: Subject quality score / SQS
-Field 13.024: Latent quality metric / LQM
-Field 14.023: Segmentation quality metric / SQM
-Field 14.024: Fingerprint quality metric / FQM
-Field 15.024: Friction ridge quality metric / FQM
-Field 16.024: User-defined image quality metric / FQM
-Field 17.024: Image quality score / IQS
-Field 19.024: Friction ridge - plantar print quality metric / FQM
-Field 99.102: Biometric data quality / BDQ
1-Fields-Sample Quality Subfield OccurrencesForEach( Field in [9.135,9.316,10.024,13.024,14.023,14.024,15.024,16.024,17.024,19.024, 99.102])
{
Count(RS_Subfields) LTE 9
}
B*
Field: Sample Quality Subfield 17.7.7最初の情報項目は、生体サンプルの予測される照合性能を定量的に表したもの、すなわち品質値 / QVU でなければなりません。この情報項目には、品質アルゴリズム19 によって画像データに割り当てられた、0 から 100(を含む)の整数の画像品質スコアを含めなければなりません。値が大きいほど品質が良いことを示します。「255」の入力は、品質スコアの計算の試みが失敗したことを示さなければなりません。「254」の入力は、品質スコアの計算が試みられなかったことを示さなければなりません。1-Fields-Sample Quality QVUForEach( Field in
[9.135,9.316,10.024, 16.024,17.024, 99.102])
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:1 in RS_Subfield} MO [0 to 100, 254,255]
}
}
AND
ForEach( Field in
[13.024, 14.023, 14.024, 15.024, 19.024])
{
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
ForEach(RS_Subfield in Field)
{
{US_Subfield:2 in RS_Subfield} MO [0 to 100, 254,255]
}
}
Field: Sample Quality Subfield 27.7.7A second information item shall specify the ID of the vendor of the quality algorithm used to calculate the quality score, which is an algorithm vendor identification / QAV. This 4-digit hex value (See Section 5.5 Character types) is assigned by IBIA and expressed as four characters. The IBIA maintains the Vendor Registry of CBEFF Biometric Organizations that map the value in this field to a registered organization.1-Fields-Sample Quality QAVForEach( Field in
[9.135,9.316,10.024, 16.024,17.024, 99.102])
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:2 in RS_Subfield} MO [IBIA Vendor Registry]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 4
AND
Bytes(US_Subfield:2 in RS_Subfield) MO [ASCII(A to F, 0 to 9)]
}
}
AND
ForEach( Field in
[13.024, 14.023, 14.024, 15.024, 19.024])
ForEach(RS_Subfield in Field)
{
{US_Subfield:3 in RS_Subfield} MO [IBIA Vendor Registry]
AND
Length(US_Subfield:3 in RS_Subfield) EQ 4
AND
Bytes(US_Subfield:3 in RS_Subfield) MO [ASCII(A to F, 0 to 9)]
}
}
t-10B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
ForEach(RS_Subfield in Field)
{
{US_Subfield:2 in RS_Subfield} MO [0 to 100, 254,255]
}
}
Field: Sample Quality Subfield 27.7.72 番目の情報項目は、品質スコアの計算に用いた品質アルゴリズムのベンダーの ID、すなわちアルゴリズムベンダー識別 / QAV を指定しなければなりません。この 4 桁の 16 進値(5.5 節の文字種を参照)は IBIA によって割り当てられ、4 文字で表されます。IBIA は、このフィールドの値を登録組織に対応付ける、CBEFF Biometric Organizations の Vendor Registry を維持しています。1-Fields-Sample Quality QAVForEach( Field in
[9.135,9.316,10.024, 16.024,17.024, 99.102])
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:2 in RS_Subfield} MO [IBIA Vendor Registry]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 4
AND
Bytes(US_Subfield:2 in RS_Subfield) MO [ASCII(A to F, 0 to 9)]
}
}
AND
ForEach( Field in
[13.024, 14.023, 14.024, 15.024, 19.024])
ForEach(RS_Subfield in Field)
{
{US_Subfield:3 in RS_Subfield} MO [IBIA Vendor Registry]
AND
Length(US_Subfield:3 in RS_Subfield) EQ 4
AND
Bytes(US_Subfield:3 in RS_Subfield) MO [ASCII(A to F, 0 to 9)]
}
}
t-10B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Field: Sample Quality Subfield 37.7.7A third information item shall specify a numeric product code assigned by the vendor of the quality algorithm, which may be registered with the IBIA, but registration is not required. This is the algorithm product identification / QAP that indicates which of the vendor’s algorithms was used in the calculation of the quality score. This information item contains the integer product code and should be within the range 1 to 65,534.1-Fields-Sample Quality QAPForEach( Field in [9.135,9.316,10.024,13.024,14.023,14.024,15.024,16.024,17.024,19.024, 99.102])
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:3 in RS_Subfield} MO [1 to 65,534]
}
}
AND
ForEach( Field in
[13.024, 14.023, 14.024, 15.024, 19.024])
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:4 in RS_Subfield} MO [1 to 65,534]
}
}
B*
Field: Sample Quality Additional Subfield7.7.7, 8.13.19, Table 66, 8.14.22, 8.14.23, Table 67, 8.15.17, Table69, 8.19.18 Table 80In addition to the three information items described here, the field may contain other information items.1-ForEach(RS_Subfield in 13.024)
{
{US_Subfield:1 in RS_Subfield)} MO [0 to 38, 40 to 50, 60 to 79, 81 to 84]
}
AND
ForEach(Field in [14.023,14.024])
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16, 17]
}
}
AND
ForEach(RS_Subfield in 15.024)
{
{US_Subfield:1 in RS_Subfield} MO [20 to 38, 81
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Field: Sample Quality Subfield 37.7.73 番目の情報項目は、品質アルゴリズムのベンダーが割り当てた数値の製品コードを指定しなければなりません。このコードは IBIA に登録されていてもよいですが、登録は必須ではありません。これはアルゴリズム製品識別 / QAP であり、品質スコアの計算にベンダーのどのアルゴリズムが用いられたかを示します。この情報項目には、整数の製品コードが含まれ、1 から 65,534 の範囲内であるべきです。1-Fields-Sample Quality QAPForEach( Field in [9.135,9.316,10.024,13.024,14.023,14.024,15.024,16.024,17.024,19.024, 99.102])
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:3 in RS_Subfield} MO [1 to 65,534]
}
}
AND
ForEach( Field in
[13.024, 14.023, 14.024, 15.024, 19.024])
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:4 in RS_Subfield} MO [1 to 65,534]
}
}
B*
Field: Sample Quality Additional Subfield7.7.7, 8.13.19, Table 66, 8.14.22, 8.14.23, Table 67, 8.15.17, Table69, 8.19.18 Table 80ここで説明する 3 つの情報項目に加えて、このフィールドにはほかの情報項目を含めてもよいです。1-ForEach(RS_Subfield in 13.024)
{
{US_Subfield:1 in RS_Subfield)} MO [0 to 38, 40 to 50, 60 to 79, 81 to 84]
}
AND
ForEach(Field in [14.023,14.024])
{
ForEach(RS_Subfield in Field)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16, 17]
}
}
AND
ForEach(RS_Subfield in 15.024)
{
{US_Subfield:1 in RS_Subfield} MO [20 to 38, 81
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
to 84]
}
AND
ForEach(RS_Subfield in 19.024)
{
{US_Subfield:1 in RS_Subfield} MO [60 to 77]
}
Field: Image HLL Value7.7.8.1The number of pixels contained on a single horizontal line of the image. The maximum horizontal size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types. The minimum value is 10 pixels.1M[4,8].006-HLL{[4,8].006} GTE 10
AND LTE 65534
B
1M9.128-HLL{9.128} GTE 10
AND LTE 99,999
B
1Mxx.006-HLL{[10,13 to 17,19,20].006} GTE 10
AND LTE 99,999
B
Field: Image HLL Metadata7.7.8.1<HLL should be checked against the image metadata to test for conformance.>MFields-HLL Metadata<The test assertions are included under field testing for the respective record types.>t-2
Field: Image Size7.7.8.1The total image size (HLL times VLL) shall not that can be accommodated in Field xx.001 for Traditional encoding.2Mxx.006,007-Image Size{[4,8,10,13 to 17,19,20].006} *
{[4,8,10,13 to 17,19,20].007}
LTE
{[4,8,10,13 to 17,19,20].001}
B
2M9.128,129-Image Size{9.128} *{9.129} LTE {9.001}B
Field: Image VLL Value7.7.8.2The number of horizontal lines contained in the image. The maximum vertical size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types.
The minimum value is 10 pixels.
1M[4,8].007-VLL{[4,8].007} GTE 10
AND LTE 65,534
B
1Mxx.007-VLL{[10,13 to 17,19,20].007} GTE 10
AND LTE 99,999
B
Field: Image7.7.8.2<VLL should be checked against the imageMFields-VLL<The test assertions are included under fieldt-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
to 84]
}
AND
ForEach(RS_Subfield in 19.024)
{
{US_Subfield:1 in RS_Subfield} MO [60 to 77]
}
Field: Image HLL Value7.7.8.1画像の 1 本の水平ラインに含まれるピクセル数です。水平方向の最大サイズは、レコードタイプ 4 と 8 では 65,534 ピクセル、他のレコードタイプでは 99,999 に制限されます。最小値は 10 ピクセルです。1M[4,8].006-HLL{[4,8].006} GTE 10
AND LTE 65534
B
1M9.128-HLL{9.128} GTE 10
AND LTE 99,999
B
1Mxx.006-HLL{[10,13 to 17,19,20].006} GTE 10
AND LTE 99,999
B
Field: Image HLL Metadata7.7.8.1<適合性を試験するため、HLL を画像メタデータと照合して検査すべきです。>MFields-HLL Metadata<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Field: Image Size7.7.8.1画像の合計サイズ(HLL × VLL)は、Traditional エンコーディングのフィールド xx.001 に収まる値を超えてはなりません。2Mxx.006,007-Image Size{[4,8,10,13 to 17,19,20].006} *
{[4,8,10,13 to 17,19,20].007}
LTE
{[4,8,10,13 to 17,19,20].001}
B
2M9.128,129-Image Size{9.128} *{9.129} LTE {9.001}B
Field: Image VLL Value7.7.8.2画像に含まれる水平ラインの数です。垂直方向の最大サイズは、レコードタイプ 4 と 8 では 65,534 ピクセル、他のレコードタイプでは 99,999 に制限されます。
最小値は 10 ピクセルです。
1M[4,8].007-VLL{[4,8].007} GTE 10
AND LTE 65,534
B
1Mxx.007-VLL{[10,13 to 17,19,20].007} GTE 10
AND LTE 99,999
B
Field: Image7.7.8.2<VLL は、画像MFields-VLL<試験アサーションは、各レコードタイプのt-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
VLL Metadatametadata to test for conformance.>Metadatatesting for the respective record types.>
Field: Image SLC Value7.7.8.3, Table 24, Table 53, Table 66, Table 71, Table 80, Table 81The image sampling frequency (pixel density).
<Tables related to each Record Type provide constraints on the value of SLC.>
1M9.130-SLC{9.130} MO [0,1,2]B
1Mxx.008-SLC{[10,13 to 17,19,20].008} MO [0,1,2]B
Field: Image SLC Metadata7.7.8.3A value of “1” shall indicate pixels per inch.
A value of “2” shall indicate pixels per centimeter. A value of “0” in this field indicates that no scale is provided, and the quotient of THPS/TVPS shall provide the pixel aspect ratio.
<SLC should be checked against the image metadata to test for conformance.>
MFields-SLC Metadata<The test assertions are included under field testing for the respective record types.>t-2
Field: Image THPS Value7.7.8.4, Table 24, Table 53, Table 66, Table 71, Table 80, Table 81<Tables related to each Record Type provide constraints on the value of THPS.>1M9.131-THPS{9.131} GTE 1 AND LTE 99,999B
1Mxx.009-THPS{[10,13 to 17,19,20].009} GTE 1 AND LTE 99,999B
Field: Image THPS Metadata7.7.8.4This is the integer pixel density used in the horizontal direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the horizontal component of the pixel aspect ratio, up to 5 digits.
<THPS should be checked against the image metadata to test for conformance.>
MFields-THPS Metadata<The test assertions are included under field testing for the respective record types.>t-2
Field: Image TVPS Value7.7.8.5, Table 24, Table 53, Table 66, Table 71, Table 80, Table<Tables related to each Record Type provide constraints on the value of TVPS.>1M9.132-TVPS{9.132} GTE 1 AND LTE 99,999B
1Mxx.010-TVPS{[10,13 to 17,19,20].010} GTE 1 AND LTE 99,999B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
VLL Metadataメタデータと照合して適合性を検査すべきです。>Metadataフィールド試験に含まれます。>
Field: Image SLC Value7.7.8.3, Table 24, Table 53, Table 66, Table 71, Table 80, Table 81画像のサンプリング周波数(ピクセル密度)です。
<各レコードタイプに関連する表が、SLC の値に対する制約を示しています。>
1M9.130-SLC{9.130} MO [0,1,2]B
1Mxx.008-SLC{[10,13 to 17,19,20].008} MO [0,1,2]B
Field: Image SLC Metadata7.7.8.3値「1」は、1 インチあたりのピクセル数を示さなければなりません。
値「2」は、1 センチメートルあたりのピクセル数を示さなければなりません。このフィールドの値「0」は、スケールが提供されないことを示し、THPS/TVPS の商がピクセルのアスペクト比を提供しなければなりません。
<適合性を試験するため、SLC を画像メタデータと照合して検査すべきです。>
MFields-SLC Metadata<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Field: Image THPS Value7.7.8.4, Table 24, Table 53, Table 66, Table 71, Table 80, Table 81<各レコードタイプに関連する表が、THPS の値に対する制約を示しています。>1M9.131-THPS{9.131} GTE 1 AND LTE 99,999B
1Mxx.009-THPS{[10,13 to 17,19,20].009} GTE 1 AND LTE 99,999B
Field: Image THPS Metadata7.7.8.4SLC の値が「1」または「2」の場合に、画像の水平方向に用いられる整数のピクセル密度です。SLC の値が「0」の場合、この情報項目には、最大 5 桁の、ピクセルのアスペクト比の水平成分を含めなければなりません。
<適合性を試験するため、THPS を画像メタデータと照合して検査すべきです。>
MFields-THPS Metadata<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Field: Image TVPS Value7.7.8.5, Table 24, Table 53, Table 66, Table 71, Table 80, Table<各レコードタイプに関連する表が、TVPS の値に対する制約を示しています。>1M9.132-TVPS{9.132} GTE 1 AND LTE 99,999B
1Mxx.010-TVPS{[10,13 to 17,19,20].010} GTE 1 AND LTE 99,999B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
81
Field: Image TVPS Metadata7.7.8.5This is the integer pixel density used in the vertical direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the vertical component of the pixel aspect ratio, up to 5 digits.
<TVPS should be checked against the image metadata to test for conformance.>
MFields-TVPS Metadata<The test assertions are included under field testing for the respective record types.>t-2
Field: Image BPX Value7.7.8.6, 7.7.9Some record types have a mandatory field Bits per pixel / BPX. This contains the number of bits used to represent a pixel. This field shall contain an entry of “8” for normal grayscale values of “0” to “255”. Any entry in this field greater than “8” shall represent a grayscale pixel with increased proportion. A maximum of 2 digits is allowed for this field.
Regardless of the compression algorithm used, the image shall be represented as an array of n rows by m columns by at least 8-bit pixels. Each pixel in a gray-scale image shall be represented by eight or more bits.
1Mxx.012-BPX{[13 to 17,19,20].012} GTE 8 AND LTE 99B
Field: Image BPX Metadata7.7.8.6<BPX should be checked against the image metadata to test for conformance.>MFields-BPX Metadata<The test assertions are included under field testing for the respective record types.>t-2
Field: Image SHPS Value7.7.8.7The horizontal pixel density used for the scanning of the original image / impression providing that the SLC field contains a “1” or “2”. Otherwise, this shall indicate the horizontal component of the pixel aspect ratio, up to 4 digits. This field is used if the transmission pixel scale differs from the original image scale, as listed in Transmitted horizontal pixel scale / THPS . Note that density is directly related to resolution.1Oxx.016-SHPS{[10,13,14,15,16,19].016} GTE 1 AND LTE 9,999B
1O17.022{17.022} GTE 1 AND LTE 9,999B
1O20.017{20.017} GTE 1 AND LTE 9,999B
Field: Image SVPS Value7.7.8.8The vertical pixel density used for the scanning of the original image / impression providing that the SLC field contains a “1” or “2”. Otherwise, this shall indicate the vertical component of the pixel aspect ratio, up to 4 digits. This field1Oxx.017-SVPS{[10,13,14,15,16,19].017} GTE 1 AND LTE 9,999B
1O17.023{17.023} GTE 1 AND LTE 9,999B
1O20.018{20.018} GTE 1 AND LTE 9,999B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
81
Field: Image TVPS Metadata7.7.8.5SLC の値が「1」または「2」の場合に、画像の垂直方向に用いられる整数のピクセル密度です。SLC の値が「0」の場合、この情報項目には、最大 5 桁の、ピクセルのアスペクト比の垂直成分を含めなければなりません。
<適合性を試験するため、TVPS を画像メタデータと照合して検査すべきです。>
MFields-TVPS Metadata<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Field: Image BPX Value7.7.8.6, 7.7.9一部のレコードタイプには、必須のフィールド Bits per pixel / BPX があります。これには、1 ピクセルを表すのに用いるビット数が含まれます。このフィールドには、「0」から「255」の通常のグレースケール値の場合、「8」を入力しなければなりません。このフィールドで「8」より大きい入力は、階調数が増えたグレースケールのピクセルを表さなければなりません。このフィールドには最大 2 桁が認められます。
使用する圧縮アルゴリズムにかかわらず、画像は、n 行 m 列の、少なくとも 8 ビットのピクセルの配列として表さなければなりません。グレースケール画像の各ピクセルは、8 ビット以上で表さなければなりません。
1Mxx.012-BPX{[13 to 17,19,20].012} GTE 8 AND LTE 99B
Field: Image BPX Metadata7.7.8.6<適合性を試験するため、BPX を画像メタデータと照合して検査すべきです。>MFields-BPX Metadata<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Field: Image SHPS Value7.7.8.7SLC フィールドに「1」または「2」が含まれている場合の、元の画像/印象のスキャンに用いた水平方向のピクセル密度です。そうでない場合は、最大 4 桁の、ピクセルのアスペクト比の水平成分を示さなければなりません。このフィールドは、Transmitted horizontal pixel scale / THPS に記載されているとおり、送信のピクセルスケールが元の画像のスケールと異なる場合に用います。密度は解像度と直接関係することに注意してください。1Oxx.016-SHPS{[10,13,14,15,16,19].016} GTE 1 AND LTE 9,999B
1O17.022{17.022} GTE 1 AND LTE 9,999B
1O20.017{20.017} GTE 1 AND LTE 9,999B
Field: Image SVPS Value7.7.8.8SLC フィールドに「1」または「2」が含まれている場合の、元の画像/印象のスキャンに用いた垂直方向のピクセル密度です。そうでない場合は、最大 4 桁の、ピクセルのアスペクト比の垂直成分を示さなければなりません。このフィールドは、1Oxx.017-SVPS{[10,13,14,15,16,19].017} GTE 1 AND LTE 9,999B
1O17.023{17.023} GTE 1 AND LTE 9,999B
1O20.018{20.018} GTE 1 AND LTE 9,999B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
is used if the transmission pixel scale differs from the original image scale, as listed in Transmitted vertical pixel scale /TVPS . Note that density is directly related to resolution.
Field: Image Bit Depth Value7.7.9Regardless of the compression algorithm used, the image shall be represented as an array of n rows by m columns by at least 8-bit pixels. Each pixel in a gray-scale image shall be represented by eight or more bits.MFields-Image Compression<See Requirement ID “Field: Image BPX Value”>t-2
Field: Image Format7.7.9Color images shall be represented as a series of sequential samples of a red, green, and blue intensity for each pixel. (Other color spaces are also possible. See Section 7.7.10.3). The image shall be organized in row-major order, with the lowest address corresponding to the upper left corner of the image. If the image is captured in grayscale, then only the luminance component shall be compressed and transmitted.3MFields-Image Format<Not Tested. The actual image data is not tested; only metadata.>t-1B
Field: Image JFIF7.7.9For JPEG, the data shall be formatted in accordance with the JPEG File Interchange Format, Version 1.02 (JFIF).MFields-Image JFIF<This requirement applies to all instances where a JPEG image format is used. The test assertions are included under field testing for the respective record types.>t-2
Field: Image Compression Algorithm Value7.7.9.1, Table 12For each of these fields, the entry corresponds to the appropriate Label entry in Table 12:
-Field 13.011: Compression algorithm / CGA
-Field 14.011: Compression algorithm / CGA
-Field 15.011: Compression algorithm / CGA
-Field 16.011: Compression algorithm / CGA (when containing a friction ridge image)
-Field 17.011: Compression algorithm / CGA
-Field 19.011: Compression algorithm / CGA
-Field 20.011: Compression algorithm /CGA (when containing a friction ridge image)
1M[13 to 17,19,20].011 Values{[13 to 17,19,20].011} MO [ASCII(NONE, WSQ20, JPEGB,JPEGL, JP2,JP2L,PNG)]B
Field: Image Compressio7.7.9.1<CGA should be checked against the image metadata to test forMFields-CGA Metadata<The test assertions are included under field testing for the respective record types.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
元の画像のスケールと送信ピクセルスケールが異なる場合に用いられます(Transmitted vertical pixel scale /TVPS に記載)。密度は解像度と直接関係することに注意してください。
Field: Image Bit Depth Value7.7.9使用する圧縮アルゴリズムにかかわらず、画像は、少なくとも 8 ビットのピクセルからなる n 行 m 列の配列として表さなければなりません。グレースケール画像の各ピクセルは、8 ビット以上で表さなければなりません。MFields-Image Compression<See Requirement ID “Field: Image BPX Value”>t-2
Field: Image Format7.7.9カラー画像は、各ピクセルの赤、緑、青の強度を表す連続したサンプルの系列として表さなければなりません。(ほかの色空間も可能です。7.7.10.3 節を参照してください。)画像は行優先順に構成し、最も小さいアドレスが画像の左上隅に対応しなければなりません。画像がグレースケールで取得された場合は、輝度成分のみを圧縮して送信しなければなりません。3MFields-Image Format<試験しません。実際の画像データは試験せず、メタデータのみを試験します。>t-1B
Field: Image JFIF7.7.9JPEG の場合、データは JPEG File Interchange Format, Version 1.02(JFIF)に従って書式化しなければなりません。MFields-Image JFIF<この要件は、JPEG 画像形式を用いるすべての場合に適用されます。試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Field: Image Compression Algorithm Value7.7.9.1, Table 12これらの各フィールドでは、表 12 の該当する Label の項目に対応します。
-Field 13.011: Compression algorithm / CGA
-Field 14.011: Compression algorithm / CGA
-Field 15.011: Compression algorithm / CGA
-Field 16.011: Compression algorithm / CGA(摩擦隆線画像を含む場合)
-Field 17.011: Compression algorithm / CGA
-Field 19.011: Compression algorithm / CGA
-Field 20.011: Compression algorithm /CGA(摩擦隆線画像を含む場合)
1M[13 to 17,19,20].011 Values{[13 to 17,19,20].011} MO [ASCII(NONE, WSQ20, JPEGB,JPEGL, JP2,JP2L,PNG)]B
Field: Image Compressio7.7.9.1<CGA は、画像メタデータと照合して適合性をMFields-CGA Metadata<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
n Algorithm Metadataconformance.>
Field: Image WSQ 3.17.7.9.1Only version 3.1 or higher shall be used for compressing grayscale fingerprint data at 500 ppi class with a platen area of 2 inches or greater in height. WSQ shall not be used for other than the 500 ppi class.MFields-Image WSQ 3.1 Only<This requirement applies to all instances where the WSQ image format is used. The test assertions are included under field testing for the respective record types.>t-2
Field: Type17 Compression7.7.9.2For iris images, images may be uncompressed or compressed. The compression code shall be one of the following, entered in Field 17.011: Compression algorithm / CGA:
- NONE – An entry of “NONE” indicates that the data contained in this record is uncompressed.
- PNG – This supports lossless compression. PNG is formally standardized (ISO/IEC
15444) and implementations are freely available25 (libpng).
-JP2 and JP2L - As with other biometrics, while lossless compression is preferred, iris images can be lossy-compressed. The image type (Field 17.032: Iris storage format / ISF) should be selected appropriately, and the compression ratio should be set to satisfy some known quantified storage or transmission bandwidth limitation.
The baseline JPEG algorithm (ISO/IEC 10918) is not acceptable for iris images and shall not be used. It has been shown that false match rates increase due to the presence of tiling artifacts. While JPEG was allowed in prior versions of this standard for iris compression, it is not allowed for this version. Implementers may want to support JPEG decoding for handling legacy images.
1M17.011-CGA{17.011} MO [ASCII(NONE, JP2,JP2L,PNG)]B
Field: Type10 Compression7.7.9.4For non-facial images conveyed in Record Type-10, Field 10.011: Compression algorithm/ CGA may be set to any value in Table 12, except WSQ20.1M10.011-CGAIF {10.003} NEQ ASCII(FACE)
THEN
{10.011} MO [ASCII(NONE, JPEGB,JPEGL, JP2,JP2L,PNG)]
t-98B
Field: Type167.7.9.4Non-friction ridge images contained in Record Type-16 shall specify the fileM16.011-CGA<The test assertions for this type may not be supported in this version of the CTM. If they aret-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
n Algorithm Metadata検査すべきです。>
Field: Image WSQ 3.17.7.9.1高さが 2 インチ以上のプラテン領域を持つ 500 ppi クラスのグレースケール指紋データを圧縮するには、バージョン 3.1 以上のみを使用しなければなりません。WSQ は 500 ppi クラス以外に使用してはなりません。MFields-Image WSQ 3.1 Only<この要件は、WSQ 画像形式を用いるすべての場合に適用されます。試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Field: Type17 Compression7.7.9.2虹彩画像は、非圧縮でも圧縮されていてもよいです。圧縮コードは、フィールド 17.011: Compression algorithm / CGA に入力する次のいずれかでなければなりません。
- NONE – 「NONE」の入力は、このレコードに含まれるデータが非圧縮であることを示します。
- PNG – 可逆圧縮をサポートします。PNG は正式に標準化されており(ISO/IEC
15444)、実装は自由に入手できます²⁵(libpng)。
-JP2 and JP2L - 他の生体認証と同様に、可逆圧縮が望ましいものの、虹彩画像は非可逆圧縮も可能です。画像タイプ(フィールド 17.032: Iris storage format / ISF)は適切に選択すべきであり、圧縮率は既知の定量化されたストレージまたは送信帯域幅の制限を満たすように設定すべきです。
ベースライン JPEG アルゴリズム(ISO/IEC 10918)は虹彩画像には受け入れられず、使用してはなりません。タイリングアーティファクトが存在すると誤一致率が上昇することが示されています。この標準の以前の版では虹彩圧縮に JPEG が認められていましたが、この版では認められていません。実装者は、レガシー画像を扱うために JPEG のデコードをサポートしてもよいです。
1M17.011-CGA{17.011} MO [ASCII(NONE, JP2,JP2L,PNG)]B
Field: Type10 Compression7.7.9.4レコードタイプ 10 で伝送される顔以外の画像では、フィールド 10.011: Compression algorithm/ CGA を、WSQ20 を除く表 12 のいずれかの値に設定してもよいです。1M10.011-CGAIF {10.003} NEQ ASCII(FACE)
THEN
{10.011} MO [ASCII(NONE, JPEGB,JPEGL, JP2,JP2L,PNG)]
t-98B
Field: Type167.7.9.4レコードタイプ 16 に含まれる摩擦隆線以外の画像は、ファイルM16.011-CGA<このタイプの試験アサーションは、この版の CTM ではサポートされない場合があります。サポートされる場合t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Compressionextension (suffix) corresponding to the compression used, such as OOG, JPG, WAV, and PNG in Field 16.011: Compression algorithm / CGA. A value of “NONE” indicates that the data is uncompressed.supported, they are included under field testing for Record Type-16: User-defined testing image record. >
Field: Image CSP Value7.7.10.3, Table 13Several image record types have a field Color space / CSP. It shall contain an entry from the CODE column of Table 13. If the color image type cannot be determined, an entry of “RGB” shall be entered in this field.1M10.012-CSP{10.012} MO [ASCII(UNK, GRAY, RGB, SRGB, YCC, SYCC)]B
1Mxx.013-CSP{[16,17,20].013} MO [ASCII(UNK, GRAY, RGB, SRGB, YCC, SYCC)]B
Field: Image ECL Value7.7.11, Table 14This information appears in Field 10.027: Subject eye color / SEC and in Field 17.020:
Eye color / ECL. The eye color describes the eye color of the subject as seen in the image.
If unusual or unnatural, such as is the case when colored contact lenses are present and the ‘real’ eye color cannot be ascertained, then the color shall be labeled as “XXX”. For near infra-red (NIR) images, if this field is entered, it shall be 'XXX'. Values for these fields shall be the alphabetic entries in the “Attribute code” column of Table 14.
1-10.027,17.020-EyeColor{10.027} AND {17.020} MO [ASCII(BLK, BLU, BRO, GRY,GRN,HAZ,MAR,MUL, PNK, XXX)]B
Field: Image-Paths7.8Several Record Types define open paths (also called contours or polylines) and / or closed paths (polygons) on an image… An open path is a series of connected line segments that do not close or overlap. A closed path (polygon) completes a circuit. The closed path side defined by the last vertex and the first vertex shall complete the polygon. A polygon shall have at least 3 vertices. The contours in Record Type-17: Iris image record can be a circle or ellipse. A circle only requires 2 points to define it (See Table 16).
There are two different approaches to the paths in this standard. The 2007 and 2008 version of the standard used paths for Field 14.025: Alternate finger segment position(s) / ASEG.
That approach has been retained in this version for all paths except in the
-Fields-Image-Paths<The test assertions are included under field testing for the respective record types.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Compressionの拡張子(接尾辞)のうち、使用する圧縮方式に対応するもの(OOG、JPG、WAV、PNG など)を、フィールド 16.011: Compression algorithm / CGA で指定しなければなりません。値「NONE」は、データが非圧縮であることを示します。は、レコードタイプ 16: ユーザー定義の試験用画像レコードのフィールド試験に含まれます。>
Field: Image CSP Value7.7.10.3, Table 13複数の画像レコードタイプには、Color space / CSP フィールドがあります。このフィールドには、表 13 の CODE 列から項目を入力しなければなりません。カラー画像のタイプを判定できない場合は、このフィールドに「RGB」を入力しなければなりません。1M10.012-CSP{10.012} MO [ASCII(UNK, GRAY, RGB, SRGB, YCC, SYCC)]B
1Mxx.013-CSP{[16,17,20].013} MO [ASCII(UNK, GRAY, RGB, SRGB, YCC, SYCC)]B
Field: Image ECL Value7.7.11, Table 14この情報は、フィールド 10.027: Subject eye color / SEC とフィールド 17.020:
Eye color / ECL に記録されます。目の色は、画像に写っている対象者の目の色を表します。
色が普通でない、または不自然な場合、たとえばカラーコンタクトレンズを装着していて「本来の」目の色を確認できない場合は、その色を「XXX」としなければなりません。近赤外線(NIR)画像では、このフィールドに値を入力する場合、その値は 'XXX' でなければなりません。これらのフィールドの値には、表 14 の「Attribute code」列にある英字の項目を用いなければなりません。
1-10.027,17.020-EyeColor{10.027} AND {17.020} MO [ASCII(BLK, BLU, BRO, GRY,GRN,HAZ,MAR,MUL, PNK, XXX)]B
Field: Image-Paths7.8複数のレコードタイプは、画像上に開いたパス(輪郭またはポリラインとも呼ばれます)や閉じたパス(ポリゴン)を定義します…開いたパスは、閉じたり重なったりしない、つながった線分の系列です。閉じたパス(ポリゴン)は一周して閉じます。最後の頂点と最初の頂点で定義される閉じたパスの辺によって、ポリゴンを完成させなければなりません。ポリゴンには、少なくとも 3 つの頂点がなければなりません。レコードタイプ 17: 虹彩画像レコードの輪郭は、円または楕円でもかまいません。円を定義するには 2 点だけが必要です(表 16 を参照)。
この標準には、パスに対する 2 つの異なる手法があります。標準の 2007 年版と 2008 年版では、フィールド 14.025: Alternate finger segment position(s) / ASEG にパスを用いていました。
この手法は、この版でも、
-Fields-Image-Paths<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Extended Feature Set (EFS) of Record Type-9.
Field: Image-EFS Paths7.8.1, Table 26The vertices for paths in the EFS Type-9 records are defined in a single information item27 for each of the following fields (See Table 26 Type-9 Fields for EFS). If multiple paths are present, they are stored within separate subfields. Each vertex is expressed as an (X,Y) pair of positive integers in units of 10 micrometers (0.01mm).
The Extended Feature Set used in the Record Type-9: Minutiae data record was developed as a separate encoding structure that has been incorporated into this standard. In order to avoid conflicts with systems that had already programmed using the EFS method of specifying paths, that structure is retained in this standard. EFS fields using closed paths, and requiring at least 3 vertices, are:
• Field 9.300: EFS region of interest / ROI
• Field 9.324: EFS distinctive features / DIS
• Field 9.357: EFS local quality issues / LQI An open path is a series of connected points in which there is not an implicit connection between the last and first vertices. Within EFS, open paths are used in Field 9.373: EFS ridge path segments / RPS.
-Fields-Image-EFS Paths<The test assertions are included under field testing for the respective record types.>t-2
Field: Image-Other Paths7.8.2, Tables 15 to 18The first information item is dependent upon the Record Type. The horizontal offsets (X) are the pixel counts to the right, and the vertical offsets (Y) are the pixel counts down from the origin.-Fields-Image-Other Paths<The test assertions are included under field testing for the respective record types.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
レコードタイプ 9 の拡張特徴セット(EFS)を除くすべてのパスで維持されています。
Field: Image-EFS Paths7.8.1, Table 26EFS タイプ 9 のレコードにおけるパスの頂点は、次の各フィールドの単一の情報項目27 で定義されます(表 26 の Type-9 Fields for EFS を参照)。複数のパスが存在する場合は、別々のサブフィールドに格納されます。各頂点は、10 マイクロメートル(0.01mm)単位の正の整数の (X,Y) の組として表されます。
レコードタイプ 9: マニューシャデータレコードで用いられる拡張特徴セットは、別個のエンコーディング構造として開発され、この標準に取り込まれました。パスを指定するために EFS の手法を用いて既にプログラミングされたシステムとの衝突を避けるため、その構造はこの標準で維持されています。閉じたパスを用い、少なくとも 3 つの頂点を必要とする EFS のフィールドは次のとおりです。
• Field 9.300: EFS region of interest / ROI
• Field 9.324: EFS distinctive features / DIS
• Field 9.357: EFS local quality issues / LQI 開いたパスは、最後の頂点と最初の頂点の間に暗黙の接続がない、つながった点の系列です。EFS では、開いたパスは Field 9.373: EFS ridge path segments / RPS で用いられます。
-Fields-Image-EFS Paths<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2
Field: Image-Other Paths7.8.2, Tables 15 to 18最初の情報項目は、レコードタイプに依存します。水平方向のオフセット(X)は右向きのピクセル数、垂直方向のオフセット(Y)は原点から下向きのピクセル数です。-Fields-Image-Other Paths<試験アサーションは、各レコードタイプのフィールド試験に含まれます。>t-2

Table C.4 - Assertions for Record Type 1- Transaction Information Record

表 C.4 - レコードタイプ 1(取引情報レコード)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultXML, Trad, Both
8.1: Record Type-1: Transaction Information Record
Transaction: Type1 Mandatory8.1Record Type-1 is mandatory. Only one Type-1 record is present per transaction.MType1-Mandatory<See Requirement ID “Transaction: Type1-Occurrences”>t-2
Record: Type1-Fields ASCII8.1All of the fields in the Type-1 record shall be recorded using the 7-bit ASCII codeMType1-Fields ASCII<See Requirement ID “Record: Type1-ASCII”>t-2
Field: Type1-Subfield OccurrenceTable 19<Table 19 specifies which fields contain subfields as well as the number of occurrences permitted.>1MType1-Subfields ZeroCount(Subfields in 1.[001, 002, 004 to 006, 009 to 012, 014]) EQ 0B*
1M1.003-SubfieldsCount(RS_Subfields in 1.003 ) GTE 2
AND
Count(US_Subfields in 1.003 ) EQ 2 * Count(RS_Subfields in 1.003)
AND
Count(RS_Subfields in 1.003) EQ 1 + {US_Subfield:2 in RS_Subfield:1 in 1.003}
B*
1M1.007-SubfieldsCount(US_Subfields in 1.007 ) EQ 1 OR 2B*
1M1.008-SubfieldsCount(US_Subfields in 1.008 ) EQ 1 OR 2B*
1O1.013-SubfieldsCount(US_Subfields in 1.013 ) EQ 1 OR 2B*
1O1.015-SubfieldsCount(US_Subfields in 1.015 ) MO [1 to 3]B*
1O1.016-SubfieldsCount(RS_Subfields in 1.016) LTE 99
AND
Count(US_Subfields in 1.016 ) EQ 3 * Count(RS_Subfields in 1.016)
B*
Field: Type1-Table 19<Table 19 specifies the Condition Code for1MType1-Present(1.001 to 1.005, 1.007 to 1.009, 1.011,B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果XML, Trad, Both
8.1: Record Type-1: Transaction Information Record
Transaction: Type1 Mandatory8.1レコードタイプ 1 は必須です。1 つの取引につき、タイプ 1 のレコードは 1 つだけ存在します。MType1-Mandatory<See Requirement ID “Transaction: Type1-Occurrences”>t-2
Record: Type1-Fields ASCII8.1タイプ 1 レコードのすべてのフィールドは、7 ビット ASCII コードを用いて記録しなければなりません。MType1-Fields ASCII<See Requirement ID “Record: Type1-ASCII”>t-2
Field: Type1-Subfield OccurrenceTable 19<表 19 には、サブフィールドを含むフィールドと、それぞれに認められる出現数が規定されています。>1MType1-Subfields ZeroCount(Subfields in 1.[001, 002, 004 to 006, 009 to 012, 014]) EQ 0B*
1M1.003-SubfieldsCount(RS_Subfields in 1.003 ) GTE 2
AND
Count(US_Subfields in 1.003 ) EQ 2 * Count(RS_Subfields in 1.003)
AND
Count(RS_Subfields in 1.003) EQ 1 + {US_Subfield:2 in RS_Subfield:1 in 1.003}
B*
1M1.007-SubfieldsCount(US_Subfields in 1.007 ) EQ 1 OR 2B*
1M1.008-SubfieldsCount(US_Subfields in 1.008 ) EQ 1 OR 2B*
1O1.013-SubfieldsCount(US_Subfields in 1.013 ) EQ 1 OR 2B*
1O1.015-SubfieldsCount(US_Subfields in 1.015 ) MO [1 to 3]B*
1O1.016-SubfieldsCount(RS_Subfields in 1.016) LTE 99
AND
Count(US_Subfields in 1.016 ) EQ 3 * Count(RS_Subfields in 1.016)
B*
Field: Type1-Table 19<表 19 に、Condition Code を規定しています。対象は1MType1-Present(1.001 to 1.005, 1.007 to 1.009, 1.011,B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultXML, Trad, Both
CondCodeeach field.>Mandatory CondCode1.012)
Field: Type1-CharTypeTable 19<Table 19 specifies the Character Type for each field.>-Type1-Char Type<See Requirement ID “Record: Type1-ASCII”>t-2
Field: Type1-CharCountTable 19<Table 19 specifies the Character Count for each field that contains no subfields.>1M1.001-CharCountDataLength(1.001) GTE 1B
1M1.002-CharCountDataLength(1.002) EQ 4B
1M1.004-CharCountDataLength(1.004) GTE 1 AND LTE 16B
1M1.005-CharCountDataLength(1.005) EQ 8B
1O1.006-CharCountDataLength(1.006) EQ 1B
1M1.009-CharCountDataLength(1.009) GTE 1B
1O1.010-CharCountDataLength(1.010) GTE 1B
1M1.011-CharCountDataLength(1.011) EQ 5B
1M1.012-CharCountDataLength(1.012) EQ 5B
1O1.014-CharCountDataLength(1.014) EQ 15B
Field: Type1-Subfield CharCountTable 19<Table 19 specifies the Character Count for each subfield.>1M1.003-Subfield CharCountLength(US_Subfield:1 in 1.003) EQ 1
AND
Length(US_Subfield:2 in 1.003) GTE 1 AND LTE 3
AND
ForEach(RS_Subfield in 1.003 ST RS_Subfield NOT RS_Subfield:1 in 1.003)
{
Length(US_Subfield:1,2 in RS_Subfield) GTE 1 AND LTE 2
}
B*
1M1.007-Subfield CharCountForEach(US_Subfield in 1.007)
{
Length(US_Subfield) GTE 1
}
B*
1M1.008-SubfieldForEach(US_Subfield in 1.008)
{
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果XML, Trad, Both
CondCode各フィールドです。>Mandatory CondCode1.012)
Field: Type1-CharTypeTable 19<表 19 には、各フィールドの Character Type が規定されています。>-Type1-Char Type<See Requirement ID “Record: Type1-ASCII”>t-2
Field: Type1-CharCountTable 19<表 19 には、サブフィールドを含まない各フィールドの Character Count が規定されています。>1M1.001-CharCountDataLength(1.001) GTE 1B
1M1.002-CharCountDataLength(1.002) EQ 4B
1M1.004-CharCountDataLength(1.004) GTE 1 AND LTE 16B
1M1.005-CharCountDataLength(1.005) EQ 8B
1O1.006-CharCountDataLength(1.006) EQ 1B
1M1.009-CharCountDataLength(1.009) GTE 1B
1O1.010-CharCountDataLength(1.010) GTE 1B
1M1.011-CharCountDataLength(1.011) EQ 5B
1M1.012-CharCountDataLength(1.012) EQ 5B
1O1.014-CharCountDataLength(1.014) EQ 15B
Field: Type1-Subfield CharCountTable 19<表 19 には、各サブフィールドの Character Count が規定されています。>1M1.003-Subfield CharCountLength(US_Subfield:1 in 1.003) EQ 1
AND
Length(US_Subfield:2 in 1.003) GTE 1 AND LTE 3
AND
ForEach(RS_Subfield in 1.003 ST RS_Subfield NOT RS_Subfield:1 in 1.003)
{
Length(US_Subfield:1,2 in RS_Subfield) GTE 1 AND LTE 2
}
B*
1M1.007-Subfield CharCountForEach(US_Subfield in 1.007)
{
Length(US_Subfield) GTE 1
}
B*
1M1.008-SubfieldForEach(US_Subfield in 1.008)
{
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultXML, Trad, Both
CharCountLength(US_Subfield) GTE 1
}
1O1.013-Subfield CharCountForEach(US_Subfield in 1.013)
{
Length(US_Subfield) GTE 1
}
B*
1O1.015-Subfield CharCountLength(US_Subfield:1 in 1.015) GTE 1 AND LTE 3
AND
Length(US_Subfield:2,3 in 1.015) GTE 1 AND LTE 16
B*
1O1.016-SubfieldsForEach(RS_Subfield in 1.016)
{
Length(US_Subfield:1,2,3 in RS_SUbfield) GTE 1 AND LTE 126
}
B*
Field: Type1-Field OccurrenceTable 19<Table 19 specifies the Field Occurrence for each field.>1M1.001-OccurrenceCount(1.001) EQ 1B
1M1.002-OccurrenceCount(1.002) EQ 1B
1M1.003-OccurrenceCount(1.003) EQ 1B
1M1.004-OccurrenceCount(1.004) EQ 1B
1M1.005-OccurrenceCount(1.005) EQ 1B
1O1.006-OccurrenceCount(1.006) LTE 1B
1M1.007-OccurrenceCount(1.007) EQ 1B
1M1.008-OccurrenceCount(1.008) EQ 1B
1M1.009-OccurrenceCount(1.009) EQ 1B
1O1.010-OccurrenceCount(1.010) LTE 1B
1M1.011-OccurrenceCount(1.011) EQ 1B
1M1.012-OccurrenceCount(1.012) EQ 1B
1O1.013-OccurrenceCount(1.013) LTE 1B
1O1.014-OccurrenceCount(1.014) LTE 1B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果XML, Trad, Both
CharCountLength(US_Subfield) GTE 1
}
1O1.013-Subfield CharCountForEach(US_Subfield in 1.013)
{
Length(US_Subfield) GTE 1
}
B*
1O1.015-Subfield CharCountLength(US_Subfield:1 in 1.015) GTE 1 AND LTE 3
AND
Length(US_Subfield:2,3 in 1.015) GTE 1 AND LTE 16
B*
1O1.016-SubfieldsForEach(RS_Subfield in 1.016)
{
Length(US_Subfield:1,2,3 in RS_SUbfield) GTE 1 AND LTE 126
}
B*
Field: Type1-Field OccurrenceTable 19<表 19 に、各フィールドの Field Occurrence が規定されています。>1M1.001-OccurrenceCount(1.001) EQ 1B
1M1.002-OccurrenceCount(1.002) EQ 1B
1M1.003-OccurrenceCount(1.003) EQ 1B
1M1.004-OccurrenceCount(1.004) EQ 1B
1M1.005-OccurrenceCount(1.005) EQ 1B
1O1.006-OccurrenceCount(1.006) LTE 1B
1M1.007-OccurrenceCount(1.007) EQ 1B
1M1.008-OccurrenceCount(1.008) EQ 1B
1M1.009-OccurrenceCount(1.009) EQ 1B
1O1.010-OccurrenceCount(1.010) LTE 1B
1M1.011-OccurrenceCount(1.011) EQ 1B
1M1.012-OccurrenceCount(1.012) EQ 1B
1O1.013-OccurrenceCount(1.013) LTE 1B
1O1.014-OccurrenceCount(1.014) LTE 1B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultXML, Trad, Both
1O1.015-OccurrenceCount(1.015) LTE 1B
1O1.016-OccurrenceCount(1.016) LTE 1B
Field: 1.001-Record Header Value8.1.1, Table 19, 7.1Field 1.001 Record header. In Traditional encoding, this field contains the record length in bytes (including all information separators)2M1.001-Record Header<See Requirement ID “Field: xx.001-Record Header”>t-2
8.1.1, C.10.1The XML name for the Type-1 record is <itl:PackageInformationRecord>, and its <biom:RecordCategoryCode> element shall have a value of 01.1MNIEM-1.001-Record HeaderForEach(XElm(itl:PackageInformationRecord )
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(01)
}
X
Field: 1.002-Version Number Value8.1.2, Table 19This mandatory four-character ASCII value shall be used to specify the current version number of the standard implemented by the software or system creating the transaction.
The format of this field shall consist of four numeric characters. The first two characters shall specify the major version number. The last two characters shall be used to specify the minor revision number. This version of the standard has the entry “0500”
1M1.002-VER{1.002} EQ ASCII(0500)B
Field: 1.003-Transaction Content Subfields8.1.3, Table 19This mandatory field shall list and identify each of the records in the transaction by record type and its IDC value. It also specifies the order in which the remaining records shall appear in the file. It shall consist of two or more subfields. The first subfield shall relate to this Type-1 Transaction record.M1.003-Subfields<See Requirement ID “Field: Type1-Subfield Occurrence” and “Field: xx.002-IDC”>t-2
Field: 1.003-Transaction Content Subfield 1 REC Value8.1.3, Table 19The first information item (record category code / REC) within this subfield shall be “1”. This indicates that the first record in the transaction is a Type-1 record consisting of header information.1M1.003-Subfield1 REC{US_Subfield:1 in RS_Subfield:1 in 1.003} EQ 1B*
Field: 1.003-Transaction Content Subfield 1 CRC8.1.3, Table 19The second information item of this subfield (content record count / CRC) shall be the sum of the Type-2 through Type-99 records contained in this transaction. This number is also equal to2M1.003-Subfield1 CRC{US_Subfield:2 in 1.003}
EQ
Count(Records in Transaction ST Type(Records)
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果XML, Trad, Both
1O1.015-OccurrenceCount(1.015) LTE 1B
1O1.016-OccurrenceCount(1.016) LTE 1B
Field: 1.001-Record Header Value8.1.1, Table 19, 7.1フィールド 1.001 レコードヘッダー。Traditional エンコーディングでは、このフィールドにレコードの長さ(すべての情報セパレーターを含む)をバイト数で示します2M1.001-Record Header<See Requirement ID “Field: xx.001-Record Header”>t-2
8.1.1, C.10.1タイプ 1 のレコードの XML 名は <itl:PackageInformationRecord> であり、その <biom:RecordCategoryCode> 要素は値 01 を持たなければなりません。1MNIEM-1.001-Record HeaderForEach(XElm(itl:PackageInformationRecord )
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(01)
}
X
Field: 1.002-Version Number Value8.1.2, Table 19この必須の 4 文字の ASCII 値は、取引を作成するソフトウェアまたはシステムが実装している標準の現在のバージョン番号を指定するために用いなければなりません。
このフィールドの形式は、4 つの数字で構成しなければなりません。最初の 2 文字はメジャーバージョン番号を指定しなければなりません。最後の 2 文字は、マイナーの改訂番号を指定するために用いなければなりません。この版の標準の入力は「0500」です
1M1.002-VER{1.002} EQ ASCII(0500)B
Field: 1.003-Transaction Content Subfields8.1.3, Table 19この必須のフィールドは、取引内の各レコードを、レコードタイプとその IDC の値で列挙し、識別しなければなりません。また、残りのレコードがファイルに現れる順序も指定します。2 つ以上のサブフィールドで構成しなければなりません。最初のサブフィールドは、このタイプ 1 の取引レコードに関するものでなければなりません。M1.003-Subfields<See Requirement ID “Field: Type1-Subfield Occurrence” and “Field: xx.002-IDC”>t-2
Field: 1.003-Transaction Content Subfield 1 REC Value8.1.3, Table 19このサブフィールド内の最初の情報項目(レコードカテゴリコード / REC)は「1」でなければなりません。これは、取引内の最初のレコードが、ヘッダー情報で構成されるタイプ 1 のレコードであることを示します。1M1.003-Subfield1 REC{US_Subfield:1 in RS_Subfield:1 in 1.003} EQ 1B*
Field: 1.003-Transaction Content Subfield 1 CRC8.1.3, Table 19このサブフィールドの 2 番目の情報項目(内容レコード数 / CRC)は、この取引に含まれるタイプ 2 からタイプ 99 のレコードの合計でなければなりません。この数はまた、2M1.003-Subfield1 CRC{US_Subfield:2 in 1.003}
EQ
Count(Records in Transaction ST Type(Records)
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultXML, Trad, Both
Valuethe count of the remaining subfields of Field 1.003 Transaction content / CNT. The maximum value for CRC is 999.MO [2 to 99])
EQ
Count(RS_Subfields in 1.003} - 1
Field: 1.003-Transaction Content Subfield 2 REC Value8.1.3, Table 19, Table 1Each of the remaining subfields of Field 1.003 Transaction content / CNT corresponds to a single Type-2 through Type-99 record contained in the transaction. Two information items shall comprise each of these subfields: The first information item (record category code / REC), shall contain a number chosen from the “record identifier” column of Table 1.1M1.003-Subfield2 RECForEach(RS_Subfield in 1.003 ST RS_Subfield NOT RS_Subfield:1 in 1.003)
{
{US_Subfield:1 in RS_Subfield} MO [2,4,7 to 10, 13 to 21, 98,99]
AND
Present(Record in Transaction ST Type(Record) EQ {US_Subfield:1 in RS_Subfield}
}
B*
Field: 1.003-Transaction Content Subfield 2 IDC Value8.1.3, Table 19The second information item (information designation character / IDC) shall be an integer equal to or greater than zero and less than or equal to 99. See Section 7.3.1.1M1.003-Subfield2 IDCForEach(RS_Subfield in 1.003 ST NOT RS_Subfield:1 in 1.003)
{
{US_Subfield:2 in RS_Subfield} MO [0 to 99]
}
B*
Field: 1.003-Transaction Content Subfield 2 IDC Matches8.1.3, Table 19, 7.3.1IDC references are stated in Type-1 Field 1.003 Transaction content / CNT and shall be used to relate information items in the CNT field of the Type-1 record to the other records in the transaction.2M1.003-Subfield 2 IDC MatchesForEach(RS_Subfield in 1.003 ST NOT RS_Subfield:1 in 1.003)
{
Present(Record ST Type(Record) EQ {US_Subfield:1 in RS_Subfield} AND Record.002 EQ
{US_Subfield:2 in RS_Subfield} )
}
B*
Field: 1.004-Type of Transaction Value8.1.4, Table 19This mandatory field shall contain an identifier, which designates the type of transaction and subsequent processing that this transaction should be given. This shall be a maximum of 16 alphabetic characters. The TOT shall be in accordance with definitions provided by the receiving agency.) Earlier versions of this standard specifically restricted the character length of TOT to 4 characters.1M1.004-TOTTRUEB
Field: 1.005-Local Date8.1.5, Table 19,This mandatory field shall contain the local date that the transaction was1M1.005-DAT{1.005} MO [ValidLocalDate]t-6T
1MNIEM-ForEach(XElm(itl:PackageInformationRecord))t-6X
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果XML, Trad, Both
Valueフィールド 1.003 Transaction content / CNT の残りのサブフィールドの数です。CRC の最大値は 999 です。MO [2 to 99])
EQ
Count(RS_Subfields in 1.003} - 1
Field: 1.003-Transaction Content Subfield 2 REC Value8.1.3, Table 19, Table 1フィールド 1.003 Transaction content / CNT の残りの各サブフィールドは、取引に含まれるタイプ 2 からタイプ 99 のレコード 1 つに対応します。これらの各サブフィールドは、2 つの情報項目で構成しなければなりません。最初の情報項目(レコードカテゴリコード / REC)には、表 1 の「record identifier」列から選んだ番号を含めなければなりません。1M1.003-Subfield2 RECForEach(RS_Subfield in 1.003 ST RS_Subfield NOT RS_Subfield:1 in 1.003)
{
{US_Subfield:1 in RS_Subfield} MO [2,4,7 to 10, 13 to 21, 98,99]
AND
Present(Record in Transaction ST Type(Record) EQ {US_Subfield:1 in RS_Subfield}
}
B*
Field: 1.003-Transaction Content Subfield 2 IDC Value8.1.3, Table 192 番目の情報項目(情報指定文字 / IDC)は、0 以上 99 以下の整数でなければなりません。7.3.1 節を参照してください。1M1.003-Subfield2 IDCForEach(RS_Subfield in 1.003 ST NOT RS_Subfield:1 in 1.003)
{
{US_Subfield:2 in RS_Subfield} MO [0 to 99]
}
B*
Field: 1.003-Transaction Content Subfield 2 IDC Matches8.1.3, Table 19, 7.3.1IDC への参照はタイプ 1 のフィールド 1.003 Transaction content / CNT に記載され、タイプ 1 のレコードの CNT フィールド内の情報項目を、取引内の他のレコードに関連付けるために用いなければなりません。2M1.003-Subfield 2 IDC MatchesForEach(RS_Subfield in 1.003 ST NOT RS_Subfield:1 in 1.003)
{
Present(Record ST Type(Record) EQ {US_Subfield:1 in RS_Subfield} AND Record.002 EQ
{US_Subfield:2 in RS_Subfield} )
}
B*
Field: 1.004-Type of Transaction Value8.1.4, Table 19この必須のフィールドには、この取引の種類と、この取引に対して行うべきその後の処理を指定する識別子を含めなければなりません。これは最大 16 文字の英字でなければなりません。TOT は、受信機関が提供する定義に従わなければなりません。)この標準の以前の版では、TOT の文字数を 4 文字に明示的に制限していました。1M1.004-TOTTRUEB
Field: 1.005-Local Date8.1.5, Table 19,この必須のフィールドには、取引が1M1.005-DAT{1.005} MO [ValidLocalDate]t-6T
1MNIEM-ForEach(XElm(itl:PackageInformationRecord))t-6X
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultXML, Trad, Both
Value7.7.2.3submitted. The local date is recorded as YYYYMMDD. Note that this may be a different date than the corresponding GMT, due to time zone differences.1.005-DAT{
{XElm(nc:Date) in XElm(biom:TransactionDate)} MO [NIEM-ValidLocalDate]
}
Field: 1.006-Priority Value8.1.6, Table 19This optional field shall contain a single information character to designate the urgency with which a response is desired. The values shall range from 1 to 9, with 1 denoting the highest priority. The default value shall be defined by the agency receiving the transaction.1O1.006-PRY{1.006} MO [1 to 9]B
Field: 1.007-Destination Agency Value8.1.7, Table 19This mandatory field shall contain the identifier of the administration or organization designated to receive the transmission. The size and data content of this field shall be user-defined and in accordance with the receiving agency.M1.007-DES<See Requirement ID “Field: Agency Codes”>t-2
Field: 1.008-Originating Agency Value8.1.8, Table 19This mandatory field shall contain the identifier of the administration or organization originating the transaction. The size and data content of this field shall be user-defined and in accordance with the receiving agency.M1.008-ORG<See Requirement ID “Field: Agency Codes”>t-2
Field: 1.009-Transaction Control Number Value8.1.9, Table 19This mandatory field shall contain the transaction control number as assigned by the originating agency. A unique alphanumeric control number shall be assigned to each transaction. For any transaction that requires a response, the respondent shall refer to this number in communicating with the originating agency.1M1.009-TCNTRUEB
Field: 1.010-Transaction Control Reference Value8.1.10, Table 19This optional field shall be used for responses that refer to the TCN of a previous transaction involving an inquiry or other action that required a response.1O1.010-TCRTRUEB
Field: 1.011-Native Scanning Resolution Value8.1.11, Table 19This mandatory field shall be set to “00.00” if there are no Type-4 records in the transaction.
When there are Type-4 records present, this field is used to specify the native scanning resolution of the friction ridge image capture device. This field shall specify the resolution in pixels per millimeter. The resolution shall be expressed as two numeric characters
M1.011-NSR<See Requirement IDs “Field: NSR Conditional”.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果XML, Trad, Both
Value7.7.2.3提出された現地の日付を含めなければなりません。現地の日付は YYYYMMDD で記録します。タイムゾーンの違いにより、対応する GMT とは異なる日付になる場合があることに注意してください。1.005-DAT{
{XElm(nc:Date) in XElm(biom:TransactionDate)} MO [NIEM-ValidLocalDate]
}
Field: 1.006-Priority Value8.1.6, Table 19この任意のフィールドには、応答に望まれる緊急度を示す 1 つの情報文字を含めなければなりません。値は 1 から 9 の範囲でなければならず、1 が最も高い優先度を示します。既定値は、取引を受信する機関が定義しなければなりません。1O1.006-PRY{1.006} MO [1 to 9]B
Field: 1.007-Destination Agency Value8.1.7, Table 19この必須のフィールドには、送信の受信先に指定された管理部門または組織の識別子を含めなければなりません。このフィールドのサイズとデータ内容は、ユーザーが定義し、受信機関に従わなければなりません。M1.007-DES<See Requirement ID “Field: Agency Codes”>t-2
Field: 1.008-Originating Agency Value8.1.8, Table 19この必須のフィールドには、取引を発信する管理部門または組織の識別子を含めなければなりません。このフィールドのサイズとデータ内容は、ユーザーが定義し、受信機関に従わなければなりません。M1.008-ORG<See Requirement ID “Field: Agency Codes”>t-2
Field: 1.009-Transaction Control Number Value8.1.9, Table 19この必須のフィールドには、発信機関が割り当てた取引管理番号を含めなければなりません。各取引には、一意の英数字の管理番号を割り当てなければなりません。応答を必要とする取引では、応答者は、発信機関との通信においてこの番号を参照しなければなりません。1M1.009-TCNTRUEB
Field: 1.010-Transaction Control Reference Value8.1.10, Table 19この任意のフィールドは、問い合わせまたは応答を必要とするその他の行為に関する以前の取引の TCN を参照する応答に使用しなければなりません。1O1.010-TCRTRUEB
Field: 1.011-Native Scanning Resolution Value8.1.11, Table 19取引にタイプ 4 のレコードがない場合、この必須のフィールドは「00.00」に設定しなければなりません。
タイプ 4 のレコードが存在する場合、このフィールドは、摩擦隆線画像の取得装置のネイティブのスキャン解像度を指定するために用います。このフィールドは、解像度を 1 ミリメートルあたりのピクセル数で指定しなければなりません。解像度は、2 桁の数字の後に
M1.011-NSR<See Requirement IDs “Field: NSR Conditional”.>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultXML, Trad, Both
followed by a decimal point and two more numeric characters.
Field: 1.012-Nominal Resolution Value8.1.12, Table 19This mandatory field shall be set to “00.00” if there are no Type-4 records in the transaction.
When there are Type-4 records present, this field specifies the nominal resolution for the image(s) being exchanged. This field shall specify the resolution in pixels per millimeter.
The resolution shall be within the range 19.30 ppmm (490 ppi) to 20.08 ppmm (510 ppi).
M1.012-NTR<See Requirement ID “Field: Type4 NTR>t-2
Field: 1.013-Domain Name Value8.1.13, Table 19The mandatory first information item (domain name / DNM) will uniquely identify the agency, entity, or implementation used for formatting the fields in the Type-2 record. The default value for the field shall be the North American Domain implementation (NORAM).
An optional second information item (domain version number / DVN) shall contain the unique version of the particular implementation, such as 7.02.
1O1.013-DOMTRUEB*
Field: 1.013-Domain Name Occurs Once8.1.13,The domain name may only appear once within a transaction.O1.013-DOM-Occurs Once<See Requirement ID “Field: Type1-Field Occurrence”>t-2
Field: 1.014-Greenwich Mean Time Value8.1.14, Table 19This optional field provides a mechanism for expressing the date and time in terms of universal Greenwich Mean Time (GMT) units.1O1.014-GMT{1.014} MO [ValidUTC/GMT]t-6T
1ONIEM-1.014-GMTForEach(XElm(itl:PackageInformationRecord))
{
{XElm(nc:DateTime) in XElm(biom:TransactionUTCDate)} MO [NIEM-ValidUTC/GMT]
}
t-6X
Field: 1.015-Character Encoding Subfield 1 CSI Value8.1.15, Table 19, Table 2The first information item (character encoding index / CSI) is the three character identifier for the index number that references an associated character encoding. See the “Character encoding index” column of Table 2 for the valid values for this information item.1M⇑1.015-DCS-CSI{US_Subfield:1 in 1.015} MO [0,2 to 4, 128 to 999]B*
Field: 1.015-8.1.15,The second information item (character2M1.015-DCS-IF {US_Subfield:1 in 1.015} EQ 0 THENB*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果XML, Trad, Both
小数点とさらに 2 桁の数字を続けた形で表さなければなりません。
Field: 1.012-Nominal Resolution Value8.1.12, Table 19取引にタイプ 4 のレコードがない場合、この必須のフィールドは「00.00」に設定しなければなりません。
タイプ 4 のレコードが存在する場合、このフィールドは、交換される画像の公称解像度を指定します。このフィールドは、解像度を 1 ミリメートルあたりのピクセル数で指定しなければなりません。
解像度は、19.30 ppmm(490 ppi)から 20.08 ppmm(510 ppi)の範囲内でなければなりません。
M1.012-NTR<See Requirement ID “Field: Type4 NTR>t-2
Field: 1.013-Domain Name Value8.1.13, Table 19必須の最初の情報項目(ドメイン名 / DNM)は、タイプ 2 のレコードのフィールドの書式設定に用いる機関、主体、または実装を一意に識別します。このフィールドの既定値は、北米ドメイン実装(NORAM)でなければなりません。
任意の 2 番目の情報項目(ドメインのバージョン番号 / DVN)には、7.02 など、その特定の実装の固有のバージョンを含めなければなりません。
1O1.013-DOMTRUEB*
Field: 1.013-Domain Name Occurs Once8.1.13,ドメイン名は、取引内に 1 回しか現れてはなりません。O1.013-DOM-Occurs Once<See Requirement ID “Field: Type1-Field Occurrence”>t-2
Field: 1.014-Greenwich Mean Time Value8.1.14, Table 19この任意のフィールドは、日付と時刻を世界時のグリニッジ標準時(GMT)の単位で表す仕組みを提供します。1O1.014-GMT{1.014} MO [ValidUTC/GMT]t-6T
1ONIEM-1.014-GMTForEach(XElm(itl:PackageInformationRecord))
{
{XElm(nc:DateTime) in XElm(biom:TransactionUTCDate)} MO [NIEM-ValidUTC/GMT]
}
t-6X
Field: 1.015-Character Encoding Subfield 1 CSI Value8.1.15, Table 19, Table 2最初の情報項目(文字エンコーディングのインデックス / CSI)は、関連する文字エンコーディングを参照するインデックス番号に対応する 3 文字の識別子です。この情報項目の有効な値は、表 2 の「Character encoding index」列を参照してください。1M⇑1.015-DCS-CSI{US_Subfield:1 in 1.015} MO [0,2 to 4, 128 to 999]B*
Field: 1.015-8.1.15,2 番目の情報項目(文字2M1.015-DCS-IF {US_Subfield:1 in 1.015} EQ 0 THENB*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultXML, Trad, Both
Character Encoding Subfield 2 CSN ValueTable 19, Table 2encoding name / CSN) shall be the “Character encoding name” associated with that index number, taken from Table 2.CSN{US_Subfield:2 in 1.015} EQ ASCII(ASCII)
AND
IF {US_Subfield:1 in 1.015} EQ 2 THEN
{US_Subfield:2 in 1.015} EQ ASCII(UTF-16)
AND
IF {US_Subfield:1 in 1.015} EQ 3 THEN
{US_Subfield :2in 1.015} EQ ASCII(UTF-8)
AND
IF {US_Subfield:1 in 1.015} EQ 4 THEN
{US_Subfield:2 in 1.015} EQ ASCII(UTF-32)
Field: 1.015-Character Encoding Subfield 3 CSV Value8.1.15, Table 19, Table 2The optional third information item (character encoding version / CSV) is the specific version of the character encoding used. In the case of the use of UTF-8, the third optional information item may be used to hold the specific version used, so that the display terminal can be switched to the correct font family.1O⇑1.015-DCS-CSVTRUEB*
Field: 1.015-Character Encoding User DefinedThis optional field specifies the character encoding that may appear within this transaction for data with the character type listed as “U” or 'user-defined' in the record format tables.3O1.015-DCS-User Defined Encoding<Not Tested.>t-1, t-4B
Field: 1.016-Application Profile Specifications Value8.1.16, Table 19There may be multiple subfields, each designating an application profile to which this transaction conforms Each subfield shall consist of three mandatory information items:
The first information item (application profile organization / APO) will uniquely identify the agency or entity responsible for the specification.
The second information item (application profile name / APN) shall contain the name of the specification.
The third information item (application profile version number / APV) shall
1O1.016-APSTRUEB*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果XML, Trad, Both
Character Encoding Subfield 2 CSN ValueTable 19, Table 2エンコーディング名 / CSN)は、そのインデックス番号に関連する、表 2 から取った「Character encoding name」でなければなりません。CSN{US_Subfield:2 in 1.015} EQ ASCII(ASCII)
AND
IF {US_Subfield:1 in 1.015} EQ 2 THEN
{US_Subfield:2 in 1.015} EQ ASCII(UTF-16)
AND
IF {US_Subfield:1 in 1.015} EQ 3 THEN
{US_Subfield :2in 1.015} EQ ASCII(UTF-8)
AND
IF {US_Subfield:1 in 1.015} EQ 4 THEN
{US_Subfield:2 in 1.015} EQ ASCII(UTF-32)
Field: 1.015-Character Encoding Subfield 3 CSV Value8.1.15, Table 19, Table 2任意の 3 番目の情報項目(文字エンコーディングのバージョン / CSV)は、使用する文字エンコーディングの特定のバージョンです。UTF-8 を使用する場合、3 番目の任意の情報項目に、使用する特定のバージョンを保持させてもよく、これにより表示端末を正しいフォントファミリーに切り替えられます。1O⇑1.015-DCS-CSVTRUEB*
Field: 1.015-Character Encoding User Definedこの任意のフィールドは、レコード形式の表で文字種が「U」または 'user-defined' とされているデータについて、この取引内に現れる可能性のある文字エンコーディングを指定します。3O1.015-DCS-User Defined Encoding<Not Tested.>t-1, t-4B
Field: 1.016-Application Profile Specifications Value8.1.16, Table 19複数のサブフィールドがあってもよく、それぞれが、この取引が適合するアプリケーションプロファイルを指定します。各サブフィールドは、3 つの必須の情報項目で構成しなければなりません。
最初の情報項目(アプリケーションプロファイルの組織 / APO)は、仕様に責任を持つ機関または主体を一意に識別します。
2 番目の情報項目(アプリケーションプロファイル名 / APN)には、仕様の名前を含めなければなりません。
3 番目の情報項目(アプリケーションプロファイルのバージョン番号 / APV)には、
1O1.016-APSTRUEB*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultXML, Trad, Both
contain the specific version of the specification.
Field: 1.016-Application Profile Specifications Compliance8.1.16If multiple Application Profile Specifications are included in this field, the specifications must be compatible with each other: this transaction must be in compliance with all of the cited specifications. See Section 6.3O1.016<Not Tested.>t-1, t-3B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果XML, Trad, Both
仕様の特定のバージョンを含めなければなりません。
Field: 1.016-Application Profile Specifications Compliance8.1.16このフィールドに複数の Application Profile Specifications が含まれる場合、それらの仕様は互いに両立していなければなりません。この取引は、引用されたすべての仕様に準拠していなければなりません。6 節を参照してください。3O1.016<Not Tested.>t-1, t-3B

Table C.5 - Assertions for Record Type 3 - Deprecated

表 C.5 - レコードタイプ 3(廃止)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.3: Record Type-3: DEPRECATED
Transaction: Type3 Zero Occurrences8.3No instances of Record Type-3 shall be included in a transaction conformant with this version of the standard.2MType3-Zero OccurrencesForEach(Record in Transaction)
{
Type(Record) NEQ 3
}
T
2MNIEM-Type3-Zero Occurrences<An invalid record type will cause a parsing error in XML because no Record Element Tag is defined (see Table 97).>X
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.3: Record Type-3: DEPRECATED
Transaction: Type3 Zero Occurrences8.3この版の標準に適合する取引には、レコードタイプ 3 のインスタンスを含めてはなりません。2MType3-Zero OccurrencesForEach(Record in Transaction)
{
Type(Record) NEQ 3
}
T
2MNIEM-Type3-Zero Occurrences<レコード要素タグが定義されていないため、無効なレコードタイプは XML の構文解析エラーを引き起こします(表 97 を参照)。>X

Table C.6 - Assertions for Record Type 4 - Grayscale Fingerprint Image

表 C.6 - レコードタイプ 4(グレースケール指紋画像)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.4: Record Type-4: Grayscale fingerprint image
Record: Type4 Scan Resolution 500ppi8.4The Type-4 record is based on the use of a captured fingerprint image obtained using a class scanning resolution of 500 ppi. (See Section 7.7.6). It shall not be used for other than 500 ppi. class images.MType4-Scan Resolution 500ppi<See Requirement ID “Field: Type4 NTR”>t-2
Record: Type4 Image Compression WSQ8.4All images shall be compressed using WSQ.MType4-CGA WSQ Only<See Requirement IDs “Field: 4.008-Compression Algorithm Value” and “Field: 4.009-Image Data Valid”>.t-2
Field: Type4-CondCodeTable 21, Table 95<Table 21 specifies the Condition Code for each field.>1MType4-Mandatory CondCodePresent(4.001 to 4.009)B
Field: Type4-CharTypeTable 21, Table 95Traditional format requires the data in binary form (not text) with a fixed byte length.3MType4-Char Type<Not tested directly, but Type 4 is parsed as unnumbered binary data for Traditional encoding>.t-13T
Field: Type4-ByteCountTable 21, Table 95<Table 95 specifies the Byte Count for each field.>1M4.001-ByteCountLength(4.001) EQ 4T
1MNIEM-4.001-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(biom:RecordCategoryCode) EQ 2
}
X
1M4.002-ByteCountLength(4.002) EQ 1T
1MNIEM-4.002-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(nc:IdentificationID) in XElm(biom:ImageReferenceIdentification)) EQ 1 OR 2
}
X
1M4.003-ByteCountLength(4.003) EQ 1T
1MNIEM-4.003-ForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))X
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.4: レコードタイプ 4: グレースケール指紋画像
Record: Type4 Scan Resolution 500ppi8.4タイプ 4 のレコードは、クラススキャン解像度 500 ppi を用いて取得した指紋画像に基づいています。(7.7.6 節を参照してください。)500 ppi クラス以外の画像には使用してはなりません。MType4-Scan Resolution 500ppi<See Requirement ID “Field: Type4 NTR”>t-2
Record: Type4 Image Compression WSQ8.4すべての画像は、WSQ を用いて圧縮しなければなりません。MType4-CGA WSQ Only<See Requirement IDs “Field: 4.008-Compression Algorithm Value” and “Field: 4.009-Image Data Valid”>.t-2
Field: Type4-CondCodeTable 21, Table 95<表 21 に、各フィールドの Condition Code が規定されています。>1MType4-Mandatory CondCodePresent(4.001 to 4.009)B
Field: Type4-CharTypeTable 21, Table 95Traditional 形式では、データを(テキストではなく)バイナリ形式で、固定のバイト長にする必要があります。3MType4-Char Type<直接は試験しませんが、タイプ 4 は Traditional エンコーディングでは番号なしのバイナリデータとして構文解析されます>。t-13T
Field: Type4-ByteCountTable 21, Table 95<表 95 に、各フィールドの Byte Count が規定されています。>1M4.001-ByteCountLength(4.001) EQ 4T
1MNIEM-4.001-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(biom:RecordCategoryCode) EQ 2
}
X
1M4.002-ByteCountLength(4.002) EQ 1T
1MNIEM-4.002-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(nc:IdentificationID) in XElm(biom:ImageReferenceIdentification)) EQ 1 OR 2
}
X
1M4.003-ByteCountLength(4.003) EQ 1T
1MNIEM-4.003-ForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))X
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
ByteCount{
Length(XElm(biom:FingerprintImageImpressionCaptureCategoryCode)) EQ 1 OR 2
}
1M4.004-ByteCountLength(4.004) EQ 6T
1MNIEM-4.004-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(All(XElm(biom:FingerPositionCode) in XElm(biom:FingerprintImagePosition))) MO [1 to 3]
}
X
1M4.005-ByteCountLength(4.005) EQ 1T
1MNIEM-4.005-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(biom:CaptureResolutionCode) in XElm(biom:ImageCaptureDetail)) EQ 1
}
X
1M4.006-ByteCountLength(4.006) EQ 2T
1MNIEM-4.006-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(biom:ImageHorizontalLineLengthPixelQuantity)) MO [2 to 5]
}
X
1M4.007-ByteCountLength(4.007) EQ 2T
1MNIEM-4.007-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(biom:ImageVerticalLineLengthPixelQuantity)) MO [2 to 5]
}
X
1M4.008-ByteCountLength(4.008) EQ 1T
1MNIEM-4.008-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(biom:ImageCompressionAlgorithmCode)) EQ 1
}
X
2M4.009-Length(4.009) EQ {4.001} – 18T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
ByteCount{
Length(XElm(biom:FingerprintImageImpressionCaptureCategoryCode)) EQ 1 OR 2
}
1M4.004-ByteCountLength(4.004) EQ 6T
1MNIEM-4.004-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(All(XElm(biom:FingerPositionCode) in XElm(biom:FingerprintImagePosition))) MO [1 to 3]
}
X
1M4.005-ByteCountLength(4.005) EQ 1T
1MNIEM-4.005-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(biom:CaptureResolutionCode) in XElm(biom:ImageCaptureDetail)) EQ 1
}
X
1M4.006-ByteCountLength(4.006) EQ 2T
1MNIEM-4.006-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(biom:ImageHorizontalLineLengthPixelQuantity)) MO [2 to 5]
}
X
1M4.007-ByteCountLength(4.007) EQ 2T
1MNIEM-4.007-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(biom:ImageVerticalLineLengthPixelQuantity)) MO [2 to 5]
}
X
1M4.008-ByteCountLength(4.008) EQ 1T
1MNIEM-4.008-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(biom:ImageCompressionAlgorithmCode)) EQ 1
}
X
2M4.009-Length(4.009) EQ {4.001} – 18T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
ByteCount
1MNIEM-4.009-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(nc:BinaryBase64Object)) GTE 1
}
X
Field: 4.001-Record Header Value8.4.1, Table 21, 7.1Field 4.001 Record header. In Traditional encoding, this field contains the record length in bytes (including all information separators)M4.001-Record Header<See Requirement ID “Field: xx.001-Record Header”>t-2
8.4.1, C.10.4The XML name for the Type-4 record is <itl:PackageHighResolutionGrayscaleImageRecord>, and its <biom:RecordCategoryCode> element shall have a value of “04”.1MNIEM-4.001-Record HeaderForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord )
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(04)
}
X
Field: 4.002-Information Designation Character Value8.4.2, Table 21, 7.3.1This mandatory field shall be the IDC of this Type-4 record as found in the information item IDC of Field 1.003 Transaction content/CNT.M4.002-IDC<See Requirement IDs “Field: xx.002-IDC and “Field: 1.003-Transaction Content Subfield 2 IDC Matches” >t-2
Field: 4.003-Impression Type Value8.4.3 Table 21, 7.7.4.1This mandatory field shall indicate the manner by which the fingerprint was obtained. See Section 7.7.4.1 for details.1M4.003-IMP{4.003} MO [0 to 3, 8, 20 to 29, 36 to 39]B
Field: 4.004-Friction Ridge Generalized Position Value8.4.4, Table 21, Table 6, 7.7.4.2This mandatory field shall contain the decimal code number corresponding to the finger position and shall be taken from Table 6 (only finger numbers 0-10 apply to Type-4). Up to five additional finger positions shall be referenced by entering the alternate finger positions using the same format. If fewer than five finger position references are to be used, the unused position references shall be filled with 255. Six values shall be entered in each record.1M4.004-FGPBytes(4.004) MO [0x00 to 0x0A, 0xFF]T
1MNIEM-4.004-FGPForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord )
{
{All(XElm(biom:FingerPositionCode) in XElm(biom:FingerprintImagePosition))} MO [0 to 10, 255]
}
X
Field: 4.005-Image Scanning Resolution Value8.4.5, Table 21The mandatory ISR field relates to the scanning resolution of this image. Previous versions of this standard stated that 0 in this field represents the 'minimum scanning resolution.' The minimum scanning resolution was defined in ANSI/NIST-ITL 1-2007 as “19.69 ppmm plus or minus 0.20 ppmm (500 ppi plus or minus 5 ppi).” Therefore, if the image scanning resolution corresponds to the Appendix F certification level (See2M4.005-ISRIF {1.011} LTE 19.49 OR GTE 19.89 THEN
{4.005} EQ 1
ELSE
{4.005} EQ 0
B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
ByteCount
1MNIEM-4.009-ByteCountForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord))
{
Length(XElm(nc:BinaryBase64Object)) GTE 1
}
X
Field: 4.001-Record Header Value8.4.1, Table 21, 7.1フィールド 4.001 レコードヘッダー。このフィールドは、Traditional エンコーディングでは、(すべての情報セパレーターを含む)レコードの長さをバイト数で含みます。M4.001-Record Header<See Requirement ID “Field: xx.001-Record Header”>t-2
8.4.1, C.10.4タイプ 4 のレコードの XML 名は <itl:PackageHighResolutionGrayscaleImageRecord> であり、その <biom:RecordCategoryCode> 要素は値「04」を持たなければなりません。1MNIEM-4.001-Record HeaderForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord )
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(04)
}
X
Field: 4.002-Information Designation Character Value8.4.2, Table 21, 7.3.1この必須のフィールドは、フィールド 1.003 Transaction content/CNT の情報項目 IDC に記載されている、このタイプ 4 レコードの IDC でなければなりません。M4.002-IDC<See Requirement IDs “Field: xx.002-IDC and “Field: 1.003-Transaction Content Subfield 2 IDC Matches” >t-2
Field: 4.003-Impression Type Value8.4.3 Table 21, 7.7.4.1この必須のフィールドは、指紋の取得方法を示さなければなりません。詳細は 7.7.4.1 節を参照してください。1M4.003-IMP{4.003} MO [0 to 3, 8, 20 to 29, 36 to 39]B
Field: 4.004-Friction Ridge Generalized Position Value8.4.4, Table 21, Table 6, 7.7.4.2この必須のフィールドには、指の位置に対応する 10 進のコード番号を含めなければならず、表 6 から取らなければなりません(タイプ 4 には指番号 0-10 のみが適用されます)。最大 5 つの追加の指位置は、同じ形式で代替の指位置を入力することで参照しなければなりません。使用する指位置の参照が 5 つ未満の場合、使用しない位置の参照は 255 で埋めなければなりません。各レコードには 6 つの値を入力しなければなりません。1M4.004-FGPBytes(4.004) MO [0x00 to 0x0A, 0xFF]T
1MNIEM-4.004-FGPForEach(XElm(itl:PackageHighResolutionGrayscaleImageRecord )
{
{All(XElm(biom:FingerPositionCode) in XElm(biom:FingerprintImagePosition))} MO [0 to 10, 255]
}
X
Field: 4.005-Image Scanning Resolution Value8.4.5, Table 21必須の ISR フィールドは、この画像のスキャン解像度に関係します。この標準の以前の版では、このフィールドの 0 は「最小スキャン解像度」を表すと述べていました。最小スキャン解像度は、ANSI/NIST-ITL 1-2007 で「19.69 ppmm ± 0.20 ppmm(500 ppi ± 5 ppi)」と定義されていました。したがって、画像のスキャン解像度が付録 F の認証レベルに対応する場合(2M4.005-ISRIF {1.011} LTE 19.49 OR GTE 19.89 THEN
{4.005} EQ 1
ELSE
{4.005} EQ 0
B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Table
11 Class resolutions with maximum variance), a 0 shall be entered in this field. A value of 1 is entered if the actual scanning resolution (outside of the Appendix F certification range) is specified in Field 1.011 Native scanning resolution / NSR.
Field: 4.006-Horizontal Line Length Value8.4.6, Table 21This mandatory field shall contain the number of pixels on a single horizontal line of the transmitted image.M4.006-HLL<See Requirement ID “Field: Image HLL Value”>t-2
Field: 4.006-Horizontal Line Length Metadata8.4.6, Table 21, WSQ Standard<The HLL is verified by checking the image metadata if compression is used. >2M4.006-HLL WSQ MetadataIF {4.008} EQ 1 THEN
{4.006} EQ {Image Width-WSQ}
t-11B
Field: 4.007-Vertical Line Length Value8.4.7, Table 21This mandatory field shall contain the number of pixels on a single horizontal line of the transmitted image.M4.007-VLL<See Requirement ID “Field: Image VLL Value”>
Field: 4.007-Vertical Line Length Metadata8.4.7, Table 21<The VLL is verified by checking the image metadata if compression is used.>2M4.007-VLL WSQ MetadataIF {4.008} EQ 1 THEN
{4.007} EQ {Image Height-WSQ}
t-11B
Field: 4.008-Compression Algorithm Value8.4, 8.4.8, Table 21All images shall be compressed using WSQ.
This is a mandatory field, used to specify the type of compression algorithm used. A zero denotes no compression. Otherwise, the contents shall be a number allocated to the particular compression technique used by the interchange parties. The specific code for each algorithm can be found in Table 12.
1M4.008-CGA{4.008} EQ 0 OR 1t-98
Field: 4.008-Compression Algorithm Metadata8.4.8, Table 21<The CGA is verified by checking the image metadata for the compression type signature if compression is used.>2M4.008-CGA WSQ MetadataIF {4.008} EQ 1 THEN
Present(SOI-WSQ)
t-11B
Field: 4.009-Image Data Valid8.4.9This is a mandatory field. Each pixel of the uncompressed grayscale image shall be quantized to eight bits (256 gray levels) contained in a single byte. For the exchange of an uncompressed binary image, eight pixels shall be left justified and packed into a single unsigned byte. The most significant bit of the byte shall2M4.009-DATA Uncompressed ValidIF {4.008} EQ 0 THEN
Length(4.009) EQ {4.006} * {4.007}
B
2M4.009-DATA WSQ ValidIF {4.008} EQ 1 THEN
Present(SOI-WSQ,SOF-WSQ,SOB-WSQ,EOI-WSQ)
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
表
11「最大分散を伴うクラス解像度」を参照)、このフィールドには 0 を入力しなければなりません。実際のスキャン解像度(付録 F の認証範囲外)がフィールド 1.011 Native scanning resolution / NSR に指定されている場合は、値 1 を入力します。
Field: 4.006-Horizontal Line Length Value8.4.6, Table 21この必須フィールドには、送信される画像の 1 本の水平ラインにあるピクセル数を含めなければなりません。M4.006-HLL<See Requirement ID “Field: Image HLL Value”>t-2
Field: 4.006-Horizontal Line Length Metadata8.4.6, Table 21, WSQ Standard<圧縮を使用する場合、画像メタデータを検査して HLL を検証します。 >2M4.006-HLL WSQ MetadataIF {4.008} EQ 1 THEN
{4.006} EQ {Image Width-WSQ}
t-11B
Field: 4.007-Vertical Line Length Value8.4.7, Table 21この必須フィールドには、送信される画像の 1 本の垂直ラインにあるピクセル数を含めなければなりません。M4.007-VLL<See Requirement ID “Field: Image VLL Value”>
Field: 4.007-Vertical Line Length Metadata8.4.7, Table 21<圧縮を使用する場合、画像メタデータを検査して VLL を検証します。>2M4.007-VLL WSQ MetadataIF {4.008} EQ 1 THEN
{4.007} EQ {Image Height-WSQ}
t-11B
Field: 4.008-Compression Algorithm Value8.4, 8.4.8, Table 21すべての画像は、WSQ を用いて圧縮しなければなりません。
これは必須フィールドで、使用する圧縮アルゴリズムの種類を指定するために用います。ゼロは圧縮なしを示します。それ以外の場合、内容は、交換当事者が使用する特定の圧縮技術に割り当てられた番号でなければなりません。各アルゴリズムの具体的なコードは表 12 にあります。
1M4.008-CGA{4.008} EQ 0 OR 1t-98
Field: 4.008-Compression Algorithm Metadata8.4.8, Table 21<圧縮を使用する場合、画像メタデータの圧縮タイプのシグネチャを検査して CGA を検証します。>2M4.008-CGA WSQ MetadataIF {4.008} EQ 1 THEN
Present(SOI-WSQ)
t-11B
Field: 4.009-Image Data Valid8.4.9これは必須フィールドです。非圧縮グレースケール画像の各ピクセルは、1 バイトに含まれる 8 ビット(256 階調)に量子化しなければなりません。非圧縮バイナリ画像を交換する場合、8 ピクセルを左詰めにして、符号なしの 1 バイトにパックしなければなりません。バイトの最上位ビットは、2M4.009-DATA Uncompressed ValidIF {4.008} EQ 0 THEN
Length(4.009) EQ {4.006} * {4.007}
B
2M4.009-DATA WSQ ValidIF {4.008} EQ 1 THEN
Present(SOI-WSQ,SOF-WSQ,SOB-WSQ,EOI-WSQ)
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
be the first of the eight pixels scanned. If compression is used, the pixel data shall be compressed in accordance with the compression technique specified in the Field 4.008: Compression algorithm / CGA / BCA.
Field: 4.009-Image WSQ Version 3.18.4.9, 7.7.9.1Wavelet Scalar Quantization (WSQ) shall be used for compressing grayscale friction ridge data at 500 ppi class. Only version 3.1 or higher shall be used for compressing grayscale fingerprint data at 500 ppi class with a platen area of 2 inches or greater in height. WSQ shall not be used for other than the 500 ppi class.2M4.009-DATA WSQ VersionIF {4.008} EQ 1 THEN
{Encoder Version } EQ 2
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
スキャンされた 8 ピクセルの最初のものでなければなりません。圧縮を使用する場合、ピクセルデータは、フィールド 4.008: Compression algorithm / CGA / BCA に指定された圧縮技術に従って圧縮しなければなりません。
Field: 4.009-Image WSQ Version 3.18.4.9, 7.7.9.1500 ppi クラスのグレースケール摩擦隆線データの圧縮には、Wavelet Scalar Quantization(WSQ)を用いなければなりません。プラテン領域の高さが 2 インチ以上の 500 ppi クラスのグレースケール指紋データの圧縮には、バージョン 3.1 以上のみを用いなければなりません。WSQ は、500 ppi クラス以外に使用してはなりません。2M4.009-DATA WSQ VersionIF {4.008} EQ 1 THEN
{Encoder Version } EQ 2
t-11B

Table C.7 - Assertions for Record Type 5 - Deprecated

表 C.7 - レコードタイプ 5(廃止)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.5: Record Type-5: DEPRECATED
Transaction: Type5 Zero Occurrences8.5No instances of Record Type-5 shall be included in a transaction conformant with this version of the standard.2MType5-Zero OccurrencesForEach(Record in Transaction)
{
Type(Record) NEQ 5
}
T
2MNIEM-Type5-Zero Occurrences<An invalid record type will cause a parsing error in XML because no Record Element Tag is defined (see Table 97).>X
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.5: Record Type-5: DEPRECATED
Transaction: Type5 Zero Occurrences8.5この版の標準に適合する取引には、レコードタイプ 5 のインスタンスを含めてはなりません。2MType5-Zero OccurrencesForEach(Record in Transaction)
{
Type(Record) NEQ 5
}
T
2MNIEM-Type5-Zero Occurrences<レコード要素タグが定義されていないため、無効なレコードタイプは XML の構文解析エラーを引き起こします(表 97 を参照)。>X

Table C.8 - Assertions for Record Type 6 - Deprecated

表 C.8 - レコードタイプ 6(廃止)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.6: Record Type-6: DEPRECATED
Transaction: Type6 Zero Occurrences8.6No instances of Record Type-6 shall be included in a transaction conformant with this version of the standard.2MType6-Zero OccurrencesForEach(Record in Transaction)
{
Type(Record) NEQ 6
}
T
2MNIEM-Type6-Zero Occurrences<An invalid record type will cause a parsing error in XML because no Record Element Tag is defined (see Table 97).>X
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.6: Record Type-6: DEPRECATED
Transaction: Type6 Zero Occurrences8.6この版の標準に適合する取引には、レコードタイプ 6 のインスタンスを含めてはなりません。2MType6-Zero OccurrencesForEach(Record in Transaction)
{
Type(Record) NEQ 6
}
T
2MNIEM-Type6-Zero Occurrences<レコード要素タグが定義されていないため、無効なレコードタイプは XML の構文解析エラーを引き起こします(表 97 を参照)。>X

Table C.9 - Assertions for Record Type 10 - Facial, Other Body Parts & SMT Image Record

表 C.9 - レコードタイプ 10(顔、その他の身体部位、および SMT 画像レコード)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.10: Record Type-10: Facial, other body part and SMT image record
Field: Type10-Subfield OccurrenceTable 53<Table 53 specifies which fields contain subfields as well as the number of occurrences permitted.>1MType10-Subfields ZeroCount(Subfields in 10.[001 to 003, 005 to 013, 016, 017, 020, 021, 027, 030, 031, 038, 039, 903, 996, 999]) EQ 0T
1M10.004-SubfieldsCount(US_Subfields in 10.004) EQ 1 OR 2T
1D10.014-SubfieldsCount(US_Subfields in 10.014 ) EQ 4 OR 5T
1D10.018-SubfieldsCount(US_Subfields in 10.018 ) EQ 3T
1D10.019-SubfieldsCount(US_Subfields in 10.019 ) MO [1 to 3]T
1D10.023-SubfieldsIF {US_Subfield:1 in 10.023} EQ ASCII(VENDOR) THEN
Count(US_Subfields in 10.023 ) EQ 1 OR 2
ELSE
Count(US_Subfields in 10.023) EQ 1
T
1D10.024-SubfieldsCount(RS_Subfields in 10.024 ) MO [1 to 9]
AND
ForEach(RS_Subfield in 10.024)
{
Count(US_Subfields in RS_Subfield) EQ 3
}
T
1D10.025-SubfieldsCount(US_Subfields in 10.025 ) MO [3 to 6]T
1D10.026-SubfieldsCount(US_Subfields in 10.026) MO [1 to 50]T
1D10.028-SubfieldsCount(US_Subfields in 10.028 ) EQ 1 OR 2T
1D10.029-SubfieldsCount(RS_Subfields in 10.029 ) MO [1 to 88]
AND
T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.10: レコードタイプ 10: 顔、その他の身体部位、および SMT 画像レコード
Field: Type10-Subfield OccurrenceTable 53<表 53 に、どのフィールドがサブフィールドを含むか、および認められる出現数が規定されています。>1MType10-Subfields ZeroCount(Subfields in 10.[001 to 003, 005 to 013, 016, 017, 020, 021, 027, 030, 031, 038, 039, 903, 996, 999]) EQ 0T
1M10.004-SubfieldsCount(US_Subfields in 10.004) EQ 1 OR 2T
1D10.014-SubfieldsCount(US_Subfields in 10.014 ) EQ 4 OR 5T
1D10.018-SubfieldsCount(US_Subfields in 10.018 ) EQ 3T
1D10.019-SubfieldsCount(US_Subfields in 10.019 ) MO [1 to 3]T
1D10.023-SubfieldsIF {US_Subfield:1 in 10.023} EQ ASCII(VENDOR) THEN
Count(US_Subfields in 10.023 ) EQ 1 OR 2
ELSE
Count(US_Subfields in 10.023) EQ 1
T
1D10.024-SubfieldsCount(RS_Subfields in 10.024 ) MO [1 to 9]
AND
ForEach(RS_Subfield in 10.024)
{
Count(US_Subfields in RS_Subfield) EQ 3
}
T
1D10.025-SubfieldsCount(US_Subfields in 10.025 ) MO [3 to 6]T
1D10.026-SubfieldsCount(US_Subfields in 10.026) MO [1 to 50]T
1D10.028-SubfieldsCount(US_Subfields in 10.028 ) EQ 1 OR 2T
1D10.029-SubfieldsCount(RS_Subfields in 10.029 ) MO [1 to 88]
AND
T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
ForEach(RS_Subfield in 10.029)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
1D10.032-SubfieldsCount(RS_Subfields in 10.032 ) MO [1 to 88]
AND
ForEach(RS_Subfield in 10.032)
{
Count(US_Subfields in RS_Subfield) EQ 5
}
T
1D10.033-SubfieldsCount(RS_Subfields in 10.033 ) MO [1 to 12]
AND
ForEach(RS_Subfield in 10.033)
{
Count(US_Subfields in RS_Subfield) EQ 2 + 2*{US_Subfield:2 in RS_Subfield}
}
T
1D10.040-SubfieldsCount(US_Subfields in 10.040) MO [1 to 3]T
1D10.041-SubfieldsCount(US_Subfields in 10.041) EQ 2T
2D10.042-SubfieldsCount(RS_Subfields in 10.042) MO [1 to 9]
AND
ForEach(RS_Subfield in 10.042)
{
Present(US_Subfield:2,3 in RS_Subfield)
IFF
{US_Subfield:1 in RS_Subfield} MO [ASCII(TATTOO, CHEMICAL, BRANDED, CUT)]
THEN
AND
IF {US_Subfield:1 in RS_Subfield} MO [ASCII(TATTOO, CHEMICAL, BRANDED, CUT)]
THEN
Count(US_Subfields in RS_Subfield) MO [3,4]
ELSE
Count(US_Subfields in RS_Subfield) EQ 1
T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
ForEach(RS_Subfield in 10.029)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
1D10.032-SubfieldsCount(RS_Subfields in 10.032 ) MO [1 to 88]
AND
ForEach(RS_Subfield in 10.032)
{
Count(US_Subfields in RS_Subfield) EQ 5
}
T
1D10.033-SubfieldsCount(RS_Subfields in 10.033 ) MO [1 to 12]
AND
ForEach(RS_Subfield in 10.033)
{
Count(US_Subfields in RS_Subfield) EQ 2 + 2*{US_Subfield:2 in RS_Subfield}
}
T
1D10.040-SubfieldsCount(US_Subfields in 10.040) MO [1 to 3]T
1D10.041-SubfieldsCount(US_Subfields in 10.041) EQ 2T
2D10.042-SubfieldsCount(RS_Subfields in 10.042) MO [1 to 9]
AND
ForEach(RS_Subfield in 10.042)
{
Present(US_Subfield:2,3 in RS_Subfield)
IFF
{US_Subfield:1 in RS_Subfield} MO [ASCII(TATTOO, CHEMICAL, BRANDED, CUT)]
THEN
AND
IF {US_Subfield:1 in RS_Subfield} MO [ASCII(TATTOO, CHEMICAL, BRANDED, CUT)]
THEN
Count(US_Subfields in RS_Subfield) MO [3,4]
ELSE
Count(US_Subfields in RS_Subfield) EQ 1
T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
}
2D10.043-SubfieldsCount(RS_Subfields in 10.043) EQ Count(RS_Subfields in 10.042)
AND
ForEach(RS_Subfield in 10.043)
{
Count(US_Subfields in RS_Subfield) MO [1 to 6]
}
T
1O10.044-SubfieldsCount(US_Subfields in 10.044) MO [1 to 18]T
2D10.045-SubfieldsCount(RS_Subfields in 10.045 ) MO [1 to 16]
AND
ForEach(RS_Subfield in 10.045)
{
Count(US_Subfields in RS_Subfield) EQ 3 + 2*{ US_Subfield:3 in RS_Subfield}
}
T
1O10.902-SubfieldsCount(RS_Subfields in 10.902 ) GTE 1
AND
ForEach(RS_Subfield in 10.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O10.904-SubfieldsCount(US_Subfields in 10.904 ) EQ 3T
1O10.995-SubfieldsCount(RS_Subfields in 10.995 ) MO [1 to 255]
AND
ForEach(RS_Subfield in 10.995)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
1O10.997-SubfieldsCount(RS_Subfields in 10.997 ) MO [1 to 255]
AND
ForEach(RS_Subfield in 10.997)
{
T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
}
2D10.043-SubfieldsCount(RS_Subfields in 10.043) EQ Count(RS_Subfields in 10.042)
AND
ForEach(RS_Subfield in 10.043)
{
Count(US_Subfields in RS_Subfield) MO [1 to 6]
}
T
1O10.044-SubfieldsCount(US_Subfields in 10.044) MO [1 to 18]T
2D10.045-SubfieldsCount(RS_Subfields in 10.045 ) MO [1 to 16]
AND
ForEach(RS_Subfield in 10.045)
{
Count(US_Subfields in RS_Subfield) EQ 3 + 2*{ US_Subfield:3 in RS_Subfield}
}
T
1O10.902-SubfieldsCount(RS_Subfields in 10.902 ) GTE 1
AND
ForEach(RS_Subfield in 10.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O10.904-SubfieldsCount(US_Subfields in 10.904 ) EQ 3T
1O10.995-SubfieldsCount(RS_Subfields in 10.995 ) MO [1 to 255]
AND
ForEach(RS_Subfield in 10.995)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
1O10.997-SubfieldsCount(RS_Subfields in 10.997 ) MO [1 to 255]
AND
ForEach(RS_Subfield in 10.997)
{
T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
O10.998-Subfields<See Requirement ID: “Field: Geographic-Conditional”>t-2
Field: Type10-CondCodeTable 53<Table 53 specifies the Condition Code for each field.>1MType10-CondCodePresent(10.001 to 10.012, 10.999)
AND
NOT Present(10.015,10.022, 10.034 to 10.037,10.046 to 10.199, 10.901, 10.905 to 10.994)
B
Field: 10.013-SAP CondCode DependentTable 53, 8.10.13The Subject Acquisition Profile (SAP) is a mandatory field when Field 10.003: Image type / IMT contains “FACE”. Otherwise, it shall not be entered.D10.013-CondCode Dependent<See Requirement ID: “Field: SAP Conditional”>t-2
Field: 10.014-FIP CondCode DependentTable 53, 8.10.14If the face image (IMT = 'FACE') contains more than one face, or is not cropped to a “head only” or “head and shoulders” composition, this optional field contains offsets to the location of the bounding box of the face of the subject within a larger image. This field is only appropriate for images that do not comply with SAP Levels 30, 40, 50 or 51, because those images shall be cropped to a “head only” or “head and shoulders”composition.2D10.014-CondCode DependentIF Present(10.014) THEN
{10.003} EQ ASCII(FACE)
AND
{10.013} NOT MO [30,40,50,51]
B
Field: 10.018-DIST CondCode DependentTable 53, 8.10.17This optional field (which can be used only if IMT is 'FACE')…2D10.018-CondCode DependentIF Present(10.018) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.019-LAF CondCode DependentTable 53, 8.10.18This optional field …is only applicable to face images (IMT = 'FACE').2D10.019-CondCode DependentIF Present(10.019) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.020-POS CondCode DependentTable 53, 8.10.19This optional field is to be used for the exchange of facial image data2D10.020-CondCode DependentIF Present(10.020) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.021-POA CondCode DependentTable 53, 8.10.20This shall only be used for the exchange of facial image data (IMT = 'FACE'). It may be used if Field 10.020: Subject pose / POS contains an “A” to indicate an angled pose of the subject. The field shall not be used if the entry in POS is an “F”, “R”, “L”2D10.021-CondCode DependentIF Present(10.021) THEN
{10.003} EQ ASCII(FACE)
AND
{10.020} EQ ASCII(A)
B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
O10.998-Subfields<See Requirement ID: “Field: Geographic-Conditional”>t-2
Field: Type10-CondCodeTable 53<表 53 に、各フィールドの Condition Code が規定されています。>1MType10-CondCodePresent(10.001 to 10.012, 10.999)
AND
NOT Present(10.015,10.022, 10.034 to 10.037,10.046 to 10.199, 10.901, 10.905 to 10.994)
B
Field: 10.013-SAP CondCode DependentTable 53, 8.10.13Subject Acquisition Profile(SAP)は、フィールド 10.003: Image type / IMT に「FACE」が含まれる場合は必須のフィールドです。それ以外の場合は、入力してはなりません。D10.013-CondCode Dependent<See Requirement ID: “Field: SAP Conditional”>t-2
Field: 10.014-FIP CondCode DependentTable 53, 8.10.14顔画像(IMT = 'FACE')に複数の顔が含まれる場合、または「頭部のみ」もしくは「頭部と肩」の構図に切り抜かれていない場合、この任意のフィールドには、より大きな画像内での対象者の顔のバウンディングボックスの位置へのオフセットが含まれます。このフィールドは、SAP レベル 30、40、50、または 51 に適合しない画像にのみ適しています。これらの画像は、「頭部のみ」または「頭部と肩」の構図に切り抜かなければならないためです。2D10.014-CondCode DependentIF Present(10.014) THEN
{10.003} EQ ASCII(FACE)
AND
{10.013} NOT MO [30,40,50,51]
B
Field: 10.018-DIST CondCode DependentTable 53, 8.10.17この任意のフィールド(IMT が 'FACE' の場合にのみ使用できます)…2D10.018-CondCode DependentIF Present(10.018) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.019-LAF CondCode DependentTable 53, 8.10.18この任意のフィールド…は、顔画像(IMT = 'FACE')にのみ適用されます。2D10.019-CondCode DependentIF Present(10.019) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.020-POS CondCode DependentTable 53, 8.10.19この任意のフィールドは、顔画像データの交換に用います2D10.020-CondCode DependentIF Present(10.020) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.021-POA CondCode DependentTable 53, 8.10.20これは、顔画像データ(IMT = 'FACE')の交換にのみ用いなければなりません。フィールド 10.020: Subject pose / POS に、対象者の斜めの姿勢を示す「A」が含まれる場合に用いてもよいです。POS の入力が「F」、「R」、「L」2D10.021-CondCode DependentIF Present(10.021) THEN
{10.003} EQ ASCII(FACE)
AND
{10.020} EQ ASCII(A)
B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
or “D”.
Field: 10.023-PAS CondCode DependentTable 53, 8.10.21This field is mandatory if the SAP entry (Field 10.013: Subject acquisition profile / SAP) is “40” or greater for face image records. (IMT=FACE only).2D10.023-CondCode DependentIF {10.013} GTE 40 THEN
Present(10.023)
B
Field: 10.024-SQS CondCode DependentTable 53, 8.10.22This optional field shall specify quality score data for facial images (IMT = 'FACE')2D10.024-CondCode DependentIF Present(10.024) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.025-SPA CondCode DependentTable 53, 8.10.23This field shall be present when Field 10.020: Subject pose / POS contains a “D” to indicate a set of determined 3D pose angles of the same subject for a facial image (IMT = 'FACE'). If the entry in POS is an “F”, “L”, “R” or “D”, this field shall not be used2D10.025-CondCode DependentIF Present(10.025) THEN
{10.003} EQ ASCII(FACE)
AND
{10.020} EQ ASCII(D)
B
Field: 10.026-SXS CondCode DependentTable 53, 8.10.24This field is mandatory if the SAP entry for a facial image (Field 10.013: Subject acquisition profile / SAP) is 40, 50 or 51. (IMT=FACE only). In other cases, this field is optional for facial images.2D10.026-CondCode DependentIF {10.013} MO [40,50,51]
AND {10.003} EQ ASCII(FACE)
THEN
Present(10.026)
B
Field: 10.027-SEC CondCode DependentTable 53, 8.10.25This field is mandatory if the SAP entry (Field 10.013: Subject acquisition profile / SAP) is “40” or greater. For other facial images (IMT = 'FACE'), the field is optional.2D10.027-CondCode DependentIF {10.013} GTE 40
AND {10.003} EQ ASCII(FACE)
THEN
Present(10.027)
B
Field: 10.028-SHC CondCode DependentTable 53, 8.10.26This field is mandatory if the SAP entry (Field 10.013: Subject acquisition profile / SAP) is “40” or greater. For other facial image s(IMT = 'FACE'), it is optional.2D10.028-CondCode DependentIF {10.013} GTE 40
AND {10.003} EQ ASCII(FACE)
THEN
Present(10.028)
B
Field: 10.029-FFP CondCode DependentTable 53, 8.10.27The optional field shall be used for the exchange of facial image data (IMT = 'FACE') feature points or landmarks.2D10.029-CondCode DependentIF Present(10.029) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.031-TMC CondCode DependentTable 53, 8.10.29This optional field describes the specific facial (IMT = 'FACE') feature points2D10.031-CondCode DependentIF Present(10.031) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.032-3DF CondCode DependentTable 53, 8.10.30The optional field shall describe …facial feature points of the captured facial image(IMT = 'FACE').2D10.032-CondCode DependentIF Present(10.032) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.033-FEC CondCodeTable 53, 8.10.31, 8.10.29…refers to a specific contour on the face (IMT = 'FACE')2D10.033-CondCode DependentIF Present(10.033) THEN
{10.003} EQ ASCII(FACE) AND {10.031} EQ 5
B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
または「D」の場合は、このフィールドを使用してはなりません。
Field: 10.023-PAS CondCode DependentTable 53, 8.10.21顔画像レコードでは、SAP の入力(フィールド 10.013: Subject acquisition profile / SAP)が「40」以上の場合、このフィールドは必須です。(IMT=FACE のみ。)2D10.023-CondCode DependentIF {10.013} GTE 40 THEN
Present(10.023)
B
Field: 10.024-SQS CondCode DependentTable 53, 8.10.22この任意フィールドは、顔画像(IMT = 'FACE')の品質スコアデータを指定しなければなりません。2D10.024-CondCode DependentIF Present(10.024) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.025-SPA CondCode DependentTable 53, 8.10.23フィールド 10.020: Subject pose / POS に、顔画像(IMT = 'FACE')について同じ対象者の 3D 姿勢角の決定済みの組を示す「D」が含まれる場合、このフィールドが存在しなければなりません。POS の入力が「F」、「L」、「R」、または「D」の場合、このフィールドを使用してはなりません。2D10.025-CondCode DependentIF Present(10.025) THEN
{10.003} EQ ASCII(FACE)
AND
{10.020} EQ ASCII(D)
B
Field: 10.026-SXS CondCode DependentTable 53, 8.10.24顔画像の SAP の入力(フィールド 10.013: Subject acquisition profile / SAP)が 40、50、または 51 の場合、このフィールドは必須です。(IMT=FACE のみ。)それ以外の場合、顔画像ではこのフィールドは任意です。2D10.026-CondCode DependentIF {10.013} MO [40,50,51]
AND {10.003} EQ ASCII(FACE)
THEN
Present(10.026)
B
Field: 10.027-SEC CondCode DependentTable 53, 8.10.25SAP の入力(フィールド 10.013: Subject acquisition profile / SAP)が「40」以上の場合、このフィールドは必須です。それ以外の顔画像(IMT = 'FACE')では、このフィールドは任意です。2D10.027-CondCode DependentIF {10.013} GTE 40
AND {10.003} EQ ASCII(FACE)
THEN
Present(10.027)
B
Field: 10.028-SHC CondCode DependentTable 53, 8.10.26SAP の入力(フィールド 10.013: Subject acquisition profile / SAP)が「40」以上の場合、このフィールドは必須です。それ以外の顔画像(IMT = 'FACE')では、任意です。2D10.028-CondCode DependentIF {10.013} GTE 40
AND {10.003} EQ ASCII(FACE)
THEN
Present(10.028)
B
Field: 10.029-FFP CondCode DependentTable 53, 8.10.27この任意フィールドは、顔画像データ(IMT = 'FACE')の特徴点またはランドマークの交換に用いなければなりません。2D10.029-CondCode DependentIF Present(10.029) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.031-TMC CondCode DependentTable 53, 8.10.29この任意フィールドは、顔(IMT = 'FACE')の具体的な特徴点を記述します。2D10.031-CondCode DependentIF Present(10.031) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.032-3DF CondCode DependentTable 53, 8.10.30この任意フィールドは、…取得した顔画像(IMT = 'FACE')の顔の特徴点を記述しなければなりません。2D10.032-CondCode DependentIF Present(10.032) THEN
{10.003} EQ ASCII(FACE)
B
Field: 10.033-FEC CondCodeTable 53, 8.10.31, 8.10.29…顔(IMT = 'FACE')の特定の輪郭を指します。2D10.033-CondCode DependentIF Present(10.033) THEN
{10.003} EQ ASCII(FACE) AND {10.031} EQ 5
B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
DependentField 10.031: This optional field describes the specific facial (IMT= ‘FACE’) feature points contained in Field 10.029: 2d Facial feature points/ FFP and if level 5, contours shall be contained in Field 10.033: Feature contours/ FEC.
Field: 10.039-T10 CondCode DependentTable 53, 8.10.33This field shall not be used if there are no multiple images of the same SMT or body part in the transaction2D10.039-CondCode DependentIF Present(10.039) THEN
Count(Records ST Type(Record) EQ 10) GTE 2
T
2MNIEM- T10-CondCode DependentIF Present(XElm(biom:PhysicalFeatureReferenceIdentification)
THEN Count(XElm(itl:PackageFacialAndSMTImageRecord)) GTE 2
X
Field: 10.040-SMT CondCode DependentTable 53, 8.10.34This field shall be used only when Field 10.003: Image type / IMT = “SCAR”, “MARK”, or “TATTOO”. It is not used for other images2D10.040-CondCode DependentIF Present(10.040) THEN
{1.003} MO [ASCII(SCAR,MARK,TATTOO)]
B
Field: 10.041-SMS CondCode DependentTable 53, 8.10.35This field shall be used only when Field 10.003: Image type / IMT =“SCAR”, “MARK”, or “TATTOO”.2D10.041-CondCode DependentIF Present(10.041) THEN
{1.003} MO [ASCII(SCAR,MARK,TATTOO)]
B
Field: 10.042-SMD CondCode DependentTable 53, 8.10.36This field shall be used only when Field 10.003: Image type /IMT = “SCAR”, “MARK”, or “TATTOO”.2D10.042-CondCode DependentIF Present(10.042) THEN
{1.003} MO [ASCII(SCAR,MARK,TATTOO)]
B
Field: 10.043-COL CondCode DependentTable 53, 8.10.37This optional field shall contain one subfield corresponding to each subfield contained in Field 10.042: SMT descriptors / SMD2D10.043-CondCode DependentIF Present(10.043) THEN
Present(10.042)
B
Field: 10.045-OCC CondCode DependentTable 53, 8.10.37This optional field defines …the image of the face (IMT = 'FACE').2D10.045-CondCode DependentIF Present(10.045) THEN
{10.003} EQ ASCII(FACE)
B
Field: Type10-CharType8.10, Table 53<Table 53 specifies the Character Type for each field that contains no subfields. Note that even though some Character Types are listed as U (user defined), they may still have character type limitations defined in the standard text. >1-Type10-CharType NBytes(10.[001,002,005 to 010, 013,016,017,031,039]) MO [0x30 to 0x39]B
1-Type10-CharType ABytes(10.[011,012,020,027,030]) MO [0x41 to 0x5A, 0x61 to 0x7A]B
1-Type10-CharType UPresent(Bytes(10.042)
AND
{10.026} MO[0x41 to 0x5A, 0x61 to 0x7A]
B
1M10.003-CharType ASBytes(10.003) MO [0x2D, 0x41 to 0x5A, 0x61 to 0x7A]B
1D10.021-Bytes(10.021) MO [0x2B,0x2D,0x30 to 0x39]B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Dependentフィールド 10.031: この任意のフィールドは、フィールド 10.029: 2d Facial feature points/ FFP に含まれる顔(IMT= 'FACE')の具体的な特徴点を記述し、レベル 5 の場合、輪郭はフィールド 10.033: Feature contours/ FEC に含めなければなりません。
Field: 10.039-T10 CondCode DependentTable 53, 8.10.33取引内に、同じ SMT または身体部位の複数の画像がない場合、このフィールドを使用してはなりません2D10.039-CondCode DependentIF Present(10.039) THEN
Count(Records ST Type(Record) EQ 10) GTE 2
T
2MNIEM- T10-CondCode DependentIF Present(XElm(biom:PhysicalFeatureReferenceIdentification)
THEN Count(XElm(itl:PackageFacialAndSMTImageRecord)) GTE 2
X
Field: 10.040-SMT CondCode DependentTable 53, 8.10.34このフィールドは、フィールド 10.003: Image type / IMT = 「SCAR」、「MARK」、または「TATTOO」の場合にのみ用いなければなりません。他の画像には使用しません2D10.040-CondCode DependentIF Present(10.040) THEN
{1.003} MO [ASCII(SCAR,MARK,TATTOO)]
B
Field: 10.041-SMS CondCode DependentTable 53, 8.10.35このフィールドは、フィールド 10.003: Image type / IMT =「SCAR」、「MARK」、または「TATTOO」の場合にのみ用いなければなりません。2D10.041-CondCode DependentIF Present(10.041) THEN
{1.003} MO [ASCII(SCAR,MARK,TATTOO)]
B
Field: 10.042-SMD CondCode DependentTable 53, 8.10.36このフィールドは、フィールド 10.003: Image type /IMT = 「SCAR」、「MARK」、または「TATTOO」の場合にのみ用いなければなりません。2D10.042-CondCode DependentIF Present(10.042) THEN
{1.003} MO [ASCII(SCAR,MARK,TATTOO)]
B
Field: 10.043-COL CondCode DependentTable 53, 8.10.37この任意のフィールドには、フィールド 10.042: SMT descriptors / SMD に含まれる各サブフィールドに対応するサブフィールドを 1 つ含めなければなりません2D10.043-CondCode DependentIF Present(10.043) THEN
Present(10.042)
B
Field: 10.045-OCC CondCode DependentTable 53, 8.10.37この任意のフィールドは、…顔(IMT = 'FACE')の画像を定義します。2D10.045-CondCode DependentIF Present(10.045) THEN
{10.003} EQ ASCII(FACE)
B
Field: Type10-CharType8.10, Table 53<表 53 に、サブフィールドを含まない各フィールドの Character Type が規定されています。一部の Character Type は U(ユーザー定義)と記載されていますが、それでも標準の本文で文字種の制限が定義されている場合があることに注意してください。>1-Type10-CharType NBytes(10.[001,002,005 to 010, 013,016,017,031,039]) MO [0x30 to 0x39]B
1-Type10-CharType ABytes(10.[011,012,020,027,030]) MO [0x41 to 0x5A, 0x61 to 0x7A]B
1-Type10-CharType UPresent(Bytes(10.042)
AND
{10.026} MO[0x41 to 0x5A, 0x61 to 0x7A]
B
1M10.003-CharType ASBytes(10.003) MO [0x2D, 0x41 to 0x5A, 0x61 to 0x7A]B
1D10.021-Bytes(10.021) MO [0x2B,0x2D,0x30 to 0x39]B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
CharType NS
1D10.025-CharType N_USBytes(10.025) MO [0x1F, 0x2B, 0x2D, 0x30 to 0x39]B
1O10.038-CharType Text ANSBytes(10.038) MO [0x20, 0x7E]B
1O10.903-CharType Text ANSBytes(10.903) MO [0x20, 0x7E]B
1O10.996-CharType HBytes(10.996) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]B
1M10.999-CharType BPresent(Bytes(10.999))B
Field: Type10-Subfield CharType<Table 53 specifies the Character Type for each subfield.>1M10.004-Subfield CharType UPresent(Bytes(US_Subfields:1,2 in 10.004)B*
1D10.014-Subfield CharType ANBytes(US_Subfields:1 to 4 in 10.014) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:5 in 10.014) MO [0x41 to 0x5A, 0x61 to 0x7A]
B*
1M10.018-Subfield CharType ABytes(All(US_Subfields in 10.018)) MO [0x41 to 0x5A, 0x61 to 0x7A]B*
1D10.019-Subfield CharType ABytes(All(US_Subfields in 10.019)) MO [0x41 to 0x5A, 0x61 to 0x7A]B*
1D10.023-Subfield CharType ASUBytes(US_Subfields:1 in 10.023) MO [0x30, 0x32, 0x41 to 0x5A, 0x61 to 0x7A]
AND
Present(Bytes(US_Subfields:2 in 10.023))
B*
1D10.024-Subfield CharType NHForEach(RS_Subfield in 10.024)
{
Bytes(US_Subfields:1,3 in RS_Subfield) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:2 in RS_Subfield) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1D10.026-Subfield CharType U-ABytes(All(US_Subfields in 10.018)) MO [0x41 to 0x5A, 0x61 to 0x7A]B*
1D10.028-Bytes(All(US_Subfields in 10.028)) MO [0x41 toB*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
CharType NS
1D10.025-CharType N_USBytes(10.025) MO [0x1F, 0x2B, 0x2D, 0x30 to 0x39]B
1O10.038-CharType Text ANSBytes(10.038) MO [0x20, 0x7E]B
1O10.903-CharType Text ANSBytes(10.903) MO [0x20, 0x7E]B
1O10.996-CharType HBytes(10.996) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]B
1M10.999-CharType BPresent(Bytes(10.999))B
Field: Type10-Subfield CharType<表 53 に、各サブフィールドの Character Type が規定されています。>1M10.004-Subfield CharType UPresent(Bytes(US_Subfields:1,2 in 10.004)B*
1D10.014-Subfield CharType ANBytes(US_Subfields:1 to 4 in 10.014) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:5 in 10.014) MO [0x41 to 0x5A, 0x61 to 0x7A]
B*
1M10.018-Subfield CharType ABytes(All(US_Subfields in 10.018)) MO [0x41 to 0x5A, 0x61 to 0x7A]B*
1D10.019-Subfield CharType ABytes(All(US_Subfields in 10.019)) MO [0x41 to 0x5A, 0x61 to 0x7A]B*
1D10.023-Subfield CharType ASUBytes(US_Subfields:1 in 10.023) MO [0x30, 0x32, 0x41 to 0x5A, 0x61 to 0x7A]
AND
Present(Bytes(US_Subfields:2 in 10.023))
B*
1D10.024-Subfield CharType NHForEach(RS_Subfield in 10.024)
{
Bytes(US_Subfields:1,3 in RS_Subfield) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:2 in RS_Subfield) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1D10.026-Subfield CharType U-ABytes(All(US_Subfields in 10.018)) MO [0x41 to 0x5A, 0x61 to 0x7A]B*
1D10.028-Bytes(All(US_Subfields in 10.028)) MO [0x41 toB*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Subfield CharType A0x5A, 0x61 to 0x7A]
1D10.029-Subfield CharType ANSForEach(RS_Subfield in 10.029)
{
Bytes(US_Subfields:1,3,4 in RS_Subfield) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:2 in RS_Subfield) MO [0x2E, 0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1D10.032-Subfield CharType ANSForEach(RS_Subfield in 10.032)
{
Bytes(US_Subfields:1,3,4 in RS_Subfield) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:2 in RS_Subfield) MO [0x2E, 0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1D10.033-Subfield CharType ANForEach(RS_Subfield in 10.033)
{
Bytes(US_Subfield:1 in RS_Subfield) MO [0x41 to 0x5A, 0x61 to 0x7A]
AND
Bytes(US_Subfield:2 in RS_Subfield) MO [0x30 to 0x39]
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Bytes(US_Subfield) MO [0x30 to 0x39]
}
}
B*
1D10.040-Subfield CharType ANBytes(All(US_Subfields in 10.040)) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]B*
1D10.041-Subfield CharType NBytes(All(US_Subfields in 10.041)) MO [0x30 to 0x39]B*
1D10.042-Subfield CharType AUForEach(RS_Subfield in 10.042)
{
Bytes(US_Subfields:1 to 3 in RS_Subfield) MO [0x41 to 0x46, 0x61 to 0x66]
AND
Present(Bytes(US_Subfields:4 in RS_Subfield) )
}
B*
1D10.043-Bytes(All(US_Subfields in 10.043)) MO [0x41 toB*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Subfield CharType A0x5A, 0x61 to 0x7A]
1D10.029-Subfield CharType ANSForEach(RS_Subfield in 10.029)
{
Bytes(US_Subfields:1,3,4 in RS_Subfield) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:2 in RS_Subfield) MO [0x2E, 0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1D10.032-Subfield CharType ANSForEach(RS_Subfield in 10.032)
{
Bytes(US_Subfields:1,3,4 in RS_Subfield) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:2 in RS_Subfield) MO [0x2E, 0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1D10.033-Subfield CharType ANForEach(RS_Subfield in 10.033)
{
Bytes(US_Subfield:1 in RS_Subfield) MO [0x41 to 0x5A, 0x61 to 0x7A]
AND
Bytes(US_Subfield:2 in RS_Subfield) MO [0x30 to 0x39]
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Bytes(US_Subfield) MO [0x30 to 0x39]
}
}
B*
1D10.040-Subfield CharType ANBytes(All(US_Subfields in 10.040)) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]B*
1D10.041-Subfield CharType NBytes(All(US_Subfields in 10.041)) MO [0x30 to 0x39]B*
1D10.042-Subfield CharType AUForEach(RS_Subfield in 10.042)
{
Bytes(US_Subfields:1 to 3 in RS_Subfield) MO [0x41 to 0x46, 0x61 to 0x66]
AND
Present(Bytes(US_Subfields:4 in RS_Subfield) )
}
B*
1D10.043-Bytes(All(US_Subfields in 10.043)) MO [0x41 toB*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Subfield CharType A0x46, 0x61 to 0x66]
1O10.044-Subfield CharTypeBytes(All(US_Subfields in 10.044)) MO [0x41 to 0x46, 0x61 to 0x66]B*
1D10.045-Subfield CharType ANForEach(RS_Subfield in 10.045)
{
Bytes(US_Subfields:1,2 in RS_Subfield) MO [0x41 to 0x5A, 0x61 to 0x7A]
AND
Bytes(US_Subfield:3 in RS_Subfield)) MO [0x30 to 0x39]
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Bytes(US_Subfield) MO [0x30 to 0x39]
}
}
B*
1O10.902-Subfield CharType UForEach(RS_Subfield in 10.902)
{
Present(Bytes(US_Subfields:2 to 4 in RS_Subfield))
AND
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39,0x5A]
}
B*
1O10.904-Subfield CharType UPresent(Bytes(All(US_Subfields in 10.904)))B*
1O10.995-Subfield CharType NBytes(All(US_Subfields in 10.995)) MO [0x30 to 0x39]B*
1O10.997-Subfield CharType NBytes(All(US_Subfields in 10.997)) MO [0x30 to 0x39]B*
O10.998-Subfield CharType ANSU<See Requirement ID: “Field: Geographic”>t-2
Field: Type10-CharCountTable 53<Table 53 specifies the Character Count for each field that contains no subfields.>1M10.001-CharCountDataLength(10.001) GTE 1B
1M10.002-CharCountDataLength(10.002) EQ 1 OR 2B
1M10.003-CharCountDataLength(10.003) MO [1 to 11]B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Subfield CharType A0x46, 0x61 to 0x66]
1O10.044-Subfield CharTypeBytes(All(US_Subfields in 10.044)) MO [0x41 to 0x46, 0x61 to 0x66]B*
1D10.045-Subfield CharType ANForEach(RS_Subfield in 10.045)
{
Bytes(US_Subfields:1,2 in RS_Subfield) MO [0x41 to 0x5A, 0x61 to 0x7A]
AND
Bytes(US_Subfield:3 in RS_Subfield)) MO [0x30 to 0x39]
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Bytes(US_Subfield) MO [0x30 to 0x39]
}
}
B*
1O10.902-Subfield CharType UForEach(RS_Subfield in 10.902)
{
Present(Bytes(US_Subfields:2 to 4 in RS_Subfield))
AND
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39,0x5A]
}
B*
1O10.904-Subfield CharType UPresent(Bytes(All(US_Subfields in 10.904)))B*
1O10.995-Subfield CharType NBytes(All(US_Subfields in 10.995)) MO [0x30 to 0x39]B*
1O10.997-Subfield CharType NBytes(All(US_Subfields in 10.997)) MO [0x30 to 0x39]B*
O10.998-Subfield CharType ANSU<See Requirement ID: “Field: Geographic”>t-2
Field: Type10-CharCountTable 53<表 53 に、サブフィールドを含まない各フィールドの Character Count が規定されています。>1M10.001-CharCountDataLength(10.001) GTE 1B
1M10.002-CharCountDataLength(10.002) EQ 1 OR 2B
1M10.003-CharCountDataLength(10.003) MO [1 to 11]B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1M10.005-CharCountDataLength(10.005) EQ 8B
1M10.006-CharCountDataLength(10.006) MO [2 to 5]B
1M10.007-CharCountDataLength(10.007) MO [2 to 5]B
1M10.008-CharCountDataLength(10.008) EQ 1B
1M10.009-CharCountDataLength(10.009) MO [1 to 5]B
1M10.010-CharCountDataLength(10.010) MO [1 to 5]B
1M10.011-CharCountDataLength(10.011) MO [3 to 5]B
1M10.012-CharCountDataLength(10.012) MO [3 to 4]B
1D10.013-CharCountDataLength(10.013) MO [1 to 3]B
1O10.016-CharCountDataLength(10.016) MO [1 to 4]B
1O10.017-CharCountDataLength(10.017) MO [1 to 4]B
1D10.019-CharCountDataLength(10.019) MO [1 to 3]B
1D10.020-CharCountDataLength(10.020) EQ 1B
1D10.021-CharCountDataLength(10.021) MO [1 to 4]B
1D10.027-CharCountDataLength(10.027) EQ 3B
1O10.030-CharCountDataLength(10.030) MO [7 to 10]B
1D10.031-CharCountDataLength(10.031) MO [1 to 3]B
1O10.038-CharCountDataLength(10.038) MO [1 to 126]B
1D10.039-CharCountDataLength(10.039) MO [1 to 3]B
1O10.903-CharCountDataLength(10.903) MO [13 to 16]B
1O10.996-CharCountDataLength(10.996) EQ 64B
O10.998-<See Requirement ID: “Field: Geographic”>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1M10.005-CharCountDataLength(10.005) EQ 8B
1M10.006-CharCountDataLength(10.006) MO [2 to 5]B
1M10.007-CharCountDataLength(10.007) MO [2 to 5]B
1M10.008-CharCountDataLength(10.008) EQ 1B
1M10.009-CharCountDataLength(10.009) MO [1 to 5]B
1M10.010-CharCountDataLength(10.010) MO [1 to 5]B
1M10.011-CharCountDataLength(10.011) MO [3 to 5]B
1M10.012-CharCountDataLength(10.012) MO [3 to 4]B
1D10.013-CharCountDataLength(10.013) MO [1 to 3]B
1O10.016-CharCountDataLength(10.016) MO [1 to 4]B
1O10.017-CharCountDataLength(10.017) MO [1 to 4]B
1D10.019-CharCountDataLength(10.019) MO [1 to 3]B
1D10.020-CharCountDataLength(10.020) EQ 1B
1D10.021-CharCountDataLength(10.021) MO [1 to 4]B
1D10.027-CharCountDataLength(10.027) EQ 3B
1O10.030-CharCountDataLength(10.030) MO [7 to 10]B
1D10.031-CharCountDataLength(10.031) MO [1 to 3]B
1O10.038-CharCountDataLength(10.038) MO [1 to 126]B
1D10.039-CharCountDataLength(10.039) MO [1 to 3]B
1O10.903-CharCountDataLength(10.903) MO [13 to 16]B
1O10.996-CharCountDataLength(10.996) EQ 64B
O10.998-<See Requirement ID: “Field: Geographic”>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
CharCount
Field: Type10-Subfield CharCountTable 53<Table 53 specifies the Character Count for each subfield.>1M10.004-Subfield CharCountLength(All(US_Subfields in 10.004)) GTE 1B*
1D10.014-Subfield CharCountLength(US_Subfield:1 to 4 in 10.014) MO [1 to 5]
AND
Length(US_Subfield:5 in 10.014) EQ 1
B*
1D10.018-Subfield CharCountLength(US_Subfield:1 in 10.018) MO [6 to 10]
AND
Length(US_Subfield:2 in 10.018) EQ 1
AND
Length(Last(US_Subfield in 10.018)) MO [4 to 8]
B*
1D10.019-Subfield CharCountLength(All(US_Subfields in 10.019) EQ 1B*
1D10.023-Subfield CharCountLength(US_Subfield:1 in 10.023) MO [6 to 13]
AND
Length(US_Subfield:2 in 10.023) MO [1 to 64]
B*
1D10.024-Subfield CharCountForEach(RS_Subfield in 10.024)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 4
AND
Length(Last(US_Subfield in RS_Subfield)) MO [1 to 5]
}
B*
1D10.026-Subfield CharCountLength(All(US_Subfields in 10.026)) MO [3 to 20]B*
1D10.028-Subfield CharCountLength(All(US_Subfields in 10.028)) EQ 3B*
1D10.029-Subfield CharCountForEach(RS_Subfield in 10.029)
{
Length(US_Subfield:1 in RS_Subfield) EQ 1
AND
Length(US_Subfield:2 in RS_Subfield) MO [3 to 5]
AND
Length(US_Subfields:3,4 in RS_Subfield)) MO [1 to 5]
}
B*
1D10.032-Subfield CharCountForEach(RS_Subfield in 10.032)
{
Length(US_Subfield:1 in RS_Subfield) EQ 1
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
CharCount
Field: Type10-Subfield CharCountTable 53<表 53 に、各サブフィールドの Character Count が規定されています。>1M10.004-Subfield CharCountLength(All(US_Subfields in 10.004)) GTE 1B*
1D10.014-Subfield CharCountLength(US_Subfield:1 to 4 in 10.014) MO [1 to 5]
AND
Length(US_Subfield:5 in 10.014) EQ 1
B*
1D10.018-Subfield CharCountLength(US_Subfield:1 in 10.018) MO [6 to 10]
AND
Length(US_Subfield:2 in 10.018) EQ 1
AND
Length(Last(US_Subfield in 10.018)) MO [4 to 8]
B*
1D10.019-Subfield CharCountLength(All(US_Subfields in 10.019) EQ 1B*
1D10.023-Subfield CharCountLength(US_Subfield:1 in 10.023) MO [6 to 13]
AND
Length(US_Subfield:2 in 10.023) MO [1 to 64]
B*
1D10.024-Subfield CharCountForEach(RS_Subfield in 10.024)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 4
AND
Length(Last(US_Subfield in RS_Subfield)) MO [1 to 5]
}
B*
1D10.026-Subfield CharCountLength(All(US_Subfields in 10.026)) MO [3 to 20]B*
1D10.028-Subfield CharCountLength(All(US_Subfields in 10.028)) EQ 3B*
1D10.029-Subfield CharCountForEach(RS_Subfield in 10.029)
{
Length(US_Subfield:1 in RS_Subfield) EQ 1
AND
Length(US_Subfield:2 in RS_Subfield) MO [3 to 5]
AND
Length(US_Subfields:3,4 in RS_Subfield)) MO [1 to 5]
}
B*
1D10.032-Subfield CharCountForEach(RS_Subfield in 10.032)
{
Length(US_Subfield:1 in RS_Subfield) EQ 1
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
AND
Length(US_Subfield:2 in RS_Subfield) MO [3, 4]
AND
Length(US_Subfields:3 to 5 in RS_Subfield)) MO [1 to 5]
}
1D10.033-Subfield CharCountForEach(RS_Subfield in 10.033)
{
Length(US_Subfield:1 in RS_Subfield) MO [4 to 14]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1D10.040-Subfield CharCountLength(All(US_Subfields in 10.040)) MO [3 to 10]B*
1D10.041-Subfield CharCountLength(US_Subfields:1,2 in 10.041)) MO [1 to 3]B*
1D10.042-Subfield CharCountForEach(RS_Subfield in 10.042)
{
Length(US_Subfield:1 in RS_Subfield) MO [3 to 20]
AND
Length(US_Subfield:2 in RS_Subfield) MO [4 to 8]
AND
Length(US_Subfield:3 in RS_Subfield)) MO [3 to 9]
AND
Length(US_Subfield:4 in RS_Subfield)) MO [1 to 256]
}
B*
1D10.043-Subfield CharCountLength(All(US_Subfields in 10.043)) MO [3 to 7]B*
1O10.044-Subfield CharCountLength(All(US_Subfields in 10.044)) MO [3 to 11]B*
1D10.045-Subfield CharCountForEach(RS_Subfield in 10.045)
{
Length(US_Subfield:1,2 in RS_Subfield) EQ 1
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
AND
Length(US_Subfield:2 in RS_Subfield) MO [3, 4]
AND
Length(US_Subfields:3 to 5 in RS_Subfield)) MO [1 to 5]
}
1D10.033-Subfield CharCountForEach(RS_Subfield in 10.033)
{
Length(US_Subfield:1 in RS_Subfield) MO [4 to 14]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1D10.040-Subfield CharCountLength(All(US_Subfields in 10.040)) MO [3 to 10]B*
1D10.041-Subfield CharCountLength(US_Subfields:1,2 in 10.041)) MO [1 to 3]B*
1D10.042-Subfield CharCountForEach(RS_Subfield in 10.042)
{
Length(US_Subfield:1 in RS_Subfield) MO [3 to 20]
AND
Length(US_Subfield:2 in RS_Subfield) MO [4 to 8]
AND
Length(US_Subfield:3 in RS_Subfield)) MO [3 to 9]
AND
Length(US_Subfield:4 in RS_Subfield)) MO [1 to 256]
}
B*
1D10.043-Subfield CharCountLength(All(US_Subfields in 10.043)) MO [3 to 7]B*
1O10.044-Subfield CharCountLength(All(US_Subfields in 10.044)) MO [3 to 11]B*
1D10.045-Subfield CharCountForEach(RS_Subfield in 10.045)
{
Length(US_Subfield:1,2 in RS_Subfield) EQ 1
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
AND
Length(US_Subfield:3 in RS_Subfield) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
1O10.902-Subfield CharCountForEach(RS_Subfield in 10.902)
{
Length(US_Subfield:1 in RS_Subfield) EQ 15
AND
Length(US_Subfields:2,3 in RS_Subfield) MO [1 to 64]
AND
Length(US_Subfield:4 in RS_Subfield)) MO [1 to 255]
}
B*
1O10.904-Subfield CharCountLength(All(US_Subfields in 10.904)) MO [1 to 50]B*
1O10.995-Subfield CharCountForEach(RS_Subfield in 10.995)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
1O10.997-Subfield CharCountForEach(RS_Subfield in 10.997)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
O10.998-Subfield CharCount<See Requirement ID: “Field: Geographic”>t-2
Field: Type10-Field OccurrenceTable 53<Table 53 specifies the Field Occurrence for each field.>12-Type10-Occurrence ZeroCount(10.[015 ,022, 046 to 199,901,905 to 994]) EQ 0B
1MType10-Occurrence OneCount(10.[001 to 012, 999]) EQ 1B
1-Type10-Occurrence One orCount(10.[013,014,016 to 021,023 to 033,038 to 045, 902 to 904, 995 to 998) LTE 1B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
AND
Length(US_Subfield:3 in RS_Subfield) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
1O10.902-Subfield CharCountForEach(RS_Subfield in 10.902)
{
Length(US_Subfield:1 in RS_Subfield) EQ 15
AND
Length(US_Subfields:2,3 in RS_Subfield) MO [1 to 64]
AND
Length(US_Subfield:4 in RS_Subfield)) MO [1 to 255]
}
B*
1O10.904-Subfield CharCountLength(All(US_Subfields in 10.904)) MO [1 to 50]B*
1O10.995-Subfield CharCountForEach(RS_Subfield in 10.995)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
1O10.997-Subfield CharCountForEach(RS_Subfield in 10.997)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
O10.998-Subfield CharCount<See Requirement ID: “Field: Geographic”>t-2
Field: Type10-Field OccurrenceTable 53<表 53 に、各フィールドの Field Occurrence が規定されています。>12-Type10-Occurrence ZeroCount(10.[015 ,022, 046 to 199,901,905 to 994]) EQ 0B
1MType10-Occurrence OneCount(10.[001 to 012, 999]) EQ 1B
1-Type10-Occurrence One orCount(10.[013,014,016 to 021,023 to 033,038 to 045, 902 to 904, 995 to 998) LTE 1B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Fewer
Field: 10.001-Record Header Value8.10.1, Table 53, 7.1Field 10.001 Record header. In Traditional encoding, this field contains the record length in bytes (including all information separators)M10.001-Record Header<See Requirement ID “Field: xx.001-Record Header”>t-2
8.10.1, C.10.8The XML name for the Type-10 record is <itl:PackageFacialAndSMTImageRecord>, and its <biom:RecordCategoryCode> element shall have a value of “10”.1MNIEM-10.001-Record HeaderForEach(itl:PackageFacialAndSMTImageRecord)
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(10)
}
X
Field: 10.002-Information Designation Character Value8.10.2, Table 53, 7.3.1This mandatory field shall be the IDC of this Type-10 record as found in the information item IDC of Field 1.003 Transaction content/CNT.M10.002-IDC<See Requirement IDs “Field:
xx.002-IDC and “Field: 1.003-Transaction Content Subfield 2 IDC Matches” >
t-2
Field: 10.003-Image Type Value8.10.3, Table 53, Table 54This mandatory field shall be used to indicate the type of image contained in this record. It shall contain a character string from the “Image Code” column of Table 54: Type-10 image types to indicate the appropriate image type.1M10.003-IMT{10.003} MO [ASCII(SCAR,TATTOO,FACE,MARK,FRONTAL-C,REAR-C,FRONTAL-N,REAR-N,TORSO-BACK,TORSO-FRONT,CONDITION,MISSING,OTHER,CHEST,FEET,HANDS-PALM,HANDS-BACK,GENITALS,BUTTOCKS,RIGHT LEG, LEFT LEG, RIGHT ARM, LEFT ARM)]t-1B
Field: 10.004-Originating Agency Value8.10.4, 7.6The data content of this field is defined by the user and shall be in accordance with the receiving agency.M10.004-ORG<See Requirement ID “Field: Agency Codes” >t-2
Field: 10.005-Photo Capture Date Value8.10.5, 7.7.2.3This mandatory field shall contain the date that the image contained in the record was captured.1M10.005-PCD{10.005} MO [ValidLocalDate]t-6T
1MNIEM-10.005-PCDForEach(XElm(itl:PackageFacialAndSMTImageRecord))
{
{XElm(nc:Date) in XElm(biom:CaptureDate)} MO [NIEM-ValidLocalDate]
}
t-6X
Field: 10.006-Horizontal Line Length Value8.10.6, Table 53, 7.7.8.1The maximum horizontal size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types. The minimum value is 10 pixels.M10.006-HLL<See Requirement ID “Field: Image HLL Value” >t-2
Field: 10.006-Horizontal Line Length8.10.6, Table 53, 7.7.8.1<The HLLis verified by checking the image metadata if compression is used.>2M10.006-HLL Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{10.006} EQ {ImageWidth-JPEGB,JPEGL}
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Fewer
Field: 10.001-Record Header Value8.10.1, Table 53, 7.1フィールド 10.001 レコードヘッダー。Traditional エンコーディングでは、このフィールドにレコードの長さ(すべての情報セパレーターを含む)をバイト数で示します。M10.001-Record Header<See Requirement ID “Field: xx.001-Record Header”>t-2
8.10.1, C.10.8タイプ 10 のレコードの XML 名は <itl:PackageFacialAndSMTImageRecord> であり、その <biom:RecordCategoryCode> 要素は値「10」を持たなければなりません。1MNIEM-10.001-Record HeaderForEach(itl:PackageFacialAndSMTImageRecord)
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(10)
}
X
Field: 10.002-Information Designation Character Value8.10.2, Table 53, 7.3.1この必須のフィールドは、フィールド 1.003 Transaction content/CNT の情報項目 IDC にある、このタイプ 10 のレコードの IDC でなければなりません。M10.002-IDC<See Requirement IDs “Field:
xx.002-IDC and “Field: 1.003-Transaction Content Subfield 2 IDC Matches” >
t-2
Field: 10.003-Image Type Value8.10.3, Table 53, Table 54この必須のフィールドは、このレコードに含まれる画像の種類を示すために用いなければなりません。適切な画像タイプを示すため、表 54: Type-10 image types の「Image Code」列の文字列を含めなければなりません。1M10.003-IMT{10.003} MO [ASCII(SCAR,TATTOO,FACE,MARK,FRONTAL-C,REAR-C,FRONTAL-N,REAR-N,TORSO-BACK,TORSO-FRONT,CONDITION,MISSING,OTHER,CHEST,FEET,HANDS-PALM,HANDS-BACK,GENITALS,BUTTOCKS,RIGHT LEG, LEFT LEG, RIGHT ARM, LEFT ARM)]t-1B
Field: 10.004-Originating Agency Value8.10.4, 7.6このフィールドのデータ内容はユーザーが定義し、受信機関に従わなければなりません。M10.004-ORG<See Requirement ID “Field: Agency Codes” >t-2
Field: 10.005-Photo Capture Date Value8.10.5, 7.7.2.3この必須のフィールドには、レコードに含まれる画像が取得された日付を含めなければなりません。1M10.005-PCD{10.005} MO [ValidLocalDate]t-6T
1MNIEM-10.005-PCDForEach(XElm(itl:PackageFacialAndSMTImageRecord))
{
{XElm(nc:Date) in XElm(biom:CaptureDate)} MO [NIEM-ValidLocalDate]
}
t-6X
Field: 10.006-Horizontal Line Length Value8.10.6, Table 53, 7.7.8.1水平方向の最大サイズは、レコードタイプ 4 と 8 では 65,534 ピクセル、他のレコードタイプでは 99,999 に制限されます。最小値は 10 ピクセルです。M10.006-HLL<See Requirement ID “Field: Image HLL Value” >t-2
Field: 10.006-Horizontal Line Length8.10.6, Table 53, 7.7.8.1<圧縮を使用している場合、HLL は画像メタデータを検査して検証します。>2M10.006-HLL Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{10.006} EQ {ImageWidth-JPEGB,JPEGL}
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Metadata2M10.006-HLL Metadata JP2, JP2LIF {10.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {10.006} EQ {ImageWidth-JP2,JP2L}t-11B
2M10.006-HLL Metadata PNGIF {10.011} EQ ASCII(PNG) THEN
{10.006} EQ {ImageWidth-PNG}
t-11B
Field: 10.007-Vertical Line Length Value8.10.7, Table 53, 7.7.8.2The maximum vertical size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types.
The minimum value is 10 pixels.
M10.007-VLL<See Requirement ID “Field: Image VLL Value” >t-2
Field: 10.007-Vertical Line Length Metadata8.10.7, Table 53, 7.7.8.2<The VLLis verified by checking the image metadata if compression is used.>2M10.007-VLL Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{10.007} EQ {ImageHeight-JPEGB,JPEGL}
t-11B
2M10.007-VLL Metadata JP2, JP2LIF {10.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {10.007} EQ {ImageHeight-JP2,JP2L}t-11B
2M10.007-VLL Metadata PNGIF {10.011} EQ ASCII(PNG) THEN
{10.007} EQ {ImageHeight-PNG}
t-11B
Field: 10.008-Scale Units Value8.10.8, Table 53, 7.7.8.3<Table 53 lists the value constraints for SLC>M10.008-SLC<See Requirement ID “Field: Image SLC Value” >t-2
Field: 10.008-Scale Units Metadata8.10.8, Table 53, 7.7.8.3A value of “1” shall indicate pixels per inch.
A value of “2” shall indicate pixels per centimeter. A value of “0” in this field indicates that no scale is provided, and the quotient of THPS/TVPS shall provide the pixel aspect ratio.
<The SLC is verified by checking the image metadata if compression is used.>
2M10.008-SLC Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{10.008} EQ {SamplingUnits-JPEGB,JPEGL}
t-11B
M10.008-SLC Metadata JP2, JP2L<Not Tested.>t-12B
2M10.008-SLC Metadata PNGIF {10.011} EQ ASCII(PNG) THEN
IF {10.008} EQ 1 OR 2 THEN { SamplingUnits-PNG} EQ 1, ELSE IF {10.008} EQ 0 THEN { SamplingUnits-PNG} EQ 0
t-11B
Field: 10.009-Transmitted Horizontal Pixel Scale Value8.10.9, Table 53, 7.7.8.4<Table 53 lists the value constraints for THPS.>M10.009-THPS<See Requirement ID “Field: Image THPS Value” >t-2
Field: 10.009-Transmitted Horizontal Pixel Scale8.10.9, Table 53, 7.7.8.4This is the integer pixel density used in the horizontal direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the horizontal component of the2M10.009-THPS Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {10.008} EQ 1 OR 2
THEN {10.009} EQ {HorizontalDensity-JPEGB,JPEGL}
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Metadata2M10.006-HLL Metadata JP2, JP2LIF {10.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {10.006} EQ {ImageWidth-JP2,JP2L}t-11B
2M10.006-HLL Metadata PNGIF {10.011} EQ ASCII(PNG) THEN
{10.006} EQ {ImageWidth-PNG}
t-11B
Field: 10.007-Vertical Line Length Value8.10.7, Table 53, 7.7.8.2垂直方向の最大サイズは、レコードタイプ 4 と 8 では 65,534 ピクセル、他のレコードタイプでは 99,999 に制限されます。
最小値は 10 ピクセルです。
M10.007-VLL<See Requirement ID “Field: Image VLL Value” >t-2
Field: 10.007-Vertical Line Length Metadata8.10.7, Table 53, 7.7.8.2<圧縮を使用している場合、VLL は画像メタデータを検査して検証します。>2M10.007-VLL Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{10.007} EQ {ImageHeight-JPEGB,JPEGL}
t-11B
2M10.007-VLL Metadata JP2, JP2LIF {10.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {10.007} EQ {ImageHeight-JP2,JP2L}t-11B
2M10.007-VLL Metadata PNGIF {10.011} EQ ASCII(PNG) THEN
{10.007} EQ {ImageHeight-PNG}
t-11B
Field: 10.008-Scale Units Value8.10.8, Table 53, 7.7.8.3<表 53 に、SLC の値の制約が列挙されています。>M10.008-SLC<See Requirement ID “Field: Image SLC Value” >t-2
Field: 10.008-Scale Units Metadata8.10.8, Table 53, 7.7.8.3値「1」は、1 インチあたりのピクセル数を示さなければなりません。
値「2」は、1 センチメートルあたりのピクセル数を示さなければなりません。このフィールドの値「0」は、スケールが提供されないことを示し、THPS/TVPS の商がピクセルのアスペクト比を提供しなければなりません。
<圧縮を使用している場合、SLC は画像メタデータを検査して検証します。>
2M10.008-SLC Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{10.008} EQ {SamplingUnits-JPEGB,JPEGL}
t-11B
M10.008-SLC Metadata JP2, JP2L<Not Tested.>t-12B
2M10.008-SLC Metadata PNGIF {10.011} EQ ASCII(PNG) THEN
IF {10.008} EQ 1 OR 2 THEN { SamplingUnits-PNG} EQ 1, ELSE IF {10.008} EQ 0 THEN { SamplingUnits-PNG} EQ 0
t-11B
Field: 10.009-Transmitted Horizontal Pixel Scale Value8.10.9, Table 53, 7.7.8.4<表 53 に、THPS の値の制約が列挙されています。>M10.009-THPS<See Requirement ID “Field: Image THPS Value” >t-2
Field: 10.009-Transmitted Horizontal Pixel Scale8.10.9, Table 53, 7.7.8.4SLC の値が「1」または「2」の場合に、画像の水平方向に用いられる整数のピクセル密度です。SLC の値が「0」の場合、この情報項目には、ピクセルの2M10.009-THPS Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {10.008} EQ 1 OR 2
THEN {10.009} EQ {HorizontalDensity-JPEGB,JPEGL}
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Metadatapixel aspect ratio, up to 5 digits.
<The THPS is verified by checking the image metadata if compression is used.>
M10.009-THPS Metadata JP2, JP2L<Not Tested.>t-12B
2M10.009-THPS Metadata PNGIF {10.011} EQ ASCII(PNG) AND {10.008} EQ 1 THEN {10.009} EQ {HorizontalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF 10.011} EQ ASCII(PNG) AND {10.008} EQ 2
THEN {10.009} EQ {HorizontalDensity-PNG} * 0.01 (meters/cm)
t-11B
2M10.009-THPS Aspect Ratio Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL)
AND {10.008} NEQ 1 OR 2
THEN {10.009}/{10.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
M10.009-THPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M10.009-THPS Aspect Ratio Metadata PNGIF {10.011} EQ ASCII(PNG) AND {10.008} NEQ 1 OR 2
THEN {10.009}/{10.010} EQ {HorizontalDensity-PNG} / {VerticalDensity-PNG}
t-11B
Field: 10.010-Transmitted Vertical Pixel Scale Value8.10.10, Table 53, 7.7.8.5<Table 53 lists the value constraints for TVPS.>M10.010-TVPS<See Requirement ID “Field: Image TVPS Value” >t-2
Field: 10.010-Transmitted Vertical Pixel Scale Metadata8.10.10, Table 53, 7.7.8.5This is the integer pixel density used in the Vertical direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the Vertical component of the pixel aspect ratio, up to 5 digits.
<The TVPS is verified by checking the image metadata if compression is used.>
2M10.010-TVPS Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {10.008} EQ 1 OR 2
THEN {10.010} EQ {VerticalDensity-JPEGB,JPEGL}
t-11B
10.010-TVPS Metadata JP2, JP2L<Not Tested.>t-12B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Metadataアスペクト比の水平成分を、最大 5 桁で含めなければなりません。
<圧縮を使用している場合、THPS は画像メタデータを検査して検証します。>
M10.009-THPS Metadata JP2, JP2L<Not Tested.>t-12B
2M10.009-THPS Metadata PNGIF {10.011} EQ ASCII(PNG) AND {10.008} EQ 1 THEN {10.009} EQ {HorizontalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF 10.011} EQ ASCII(PNG) AND {10.008} EQ 2
THEN {10.009} EQ {HorizontalDensity-PNG} * 0.01 (meters/cm)
t-11B
2M10.009-THPS Aspect Ratio Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL)
AND {10.008} NEQ 1 OR 2
THEN {10.009}/{10.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
M10.009-THPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M10.009-THPS Aspect Ratio Metadata PNGIF {10.011} EQ ASCII(PNG) AND {10.008} NEQ 1 OR 2
THEN {10.009}/{10.010} EQ {HorizontalDensity-PNG} / {VerticalDensity-PNG}
t-11B
Field: 10.010-Transmitted Vertical Pixel Scale Value8.10.10, Table 53, 7.7.8.5<表 53 に、TVPS の値の制約が列挙されています。>M10.010-TVPS<See Requirement ID “Field: Image TVPS Value” >t-2
Field: 10.010-Transmitted Vertical Pixel Scale Metadata8.10.10, Table 53, 7.7.8.5SLC の値が「1」または「2」の場合に、画像の垂直方向に用いられる整数のピクセル密度です。SLC の値が「0」の場合、この情報項目には、ピクセルのアスペクト比の垂直成分を、最大 5 桁で含めなければなりません。
<圧縮を使用している場合、TVPS は画像メタデータを検査して検証します。>
2M10.010-TVPS Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {10.008} EQ 1 OR 2
THEN {10.010} EQ {VerticalDensity-JPEGB,JPEGL}
t-11B
10.010-TVPS Metadata JP2, JP2L<Not Tested.>t-12B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
2M10.010-TVPS Metadata PNGIF {10.011} EQ ASCII(PNG) AND {10.008} EQ 1 THEN {10.010} EQ {VerticalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF 10.011} EQ ASCII(PNG) AND {10.008} EQ 2
THEN {10.010} EQ {VerticalDensity-PNG} * 0.01 (meters/cm)
t-11B
2M10.010-TVPS Aspect Ratio Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {10.008} NEQ 1 OR 2
THEN {10.009}/{10.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
M10.010-TVPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M10.010-TVPS Aspect Ratio Metadata PNGIF {10.011} EQ ASCII(PNG) AND {10.008} NEQ 1 OR 2
THEN {10.009}/{10.010} EQ { HorizontalDensity - PNG} / {VerticalDensity-PNG}
t-11B
Field: 10.011-Compression Algorithm Value8.10.11, Table 53, 7.7.9.3, 7.7.9.4For non-facial images conveyed in Record Type-10 Field 10.011: Compression algorithm / CGA may be set to any value in Table 12, except WSQ20.M10.011-CGA<See Requirement ID: “Field: Type10 Compression”>t-2, t-98
Field: 10.011-Compression Algorithm Metadata8.10.11, Table 53<The CGA is verified by checking the image metadata for the compression type signature if compression is used.>2M10.011-CGAMetadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(SOI -JPEG,JPEGL)
t-11B
2M10.011-CGA Metadata JP2, JP2LIF {10.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox)t-11B
2M10.011-CGA Metadata PNGIF {10.011} EQ ASCII(PNG) THEN
Present(PNGSig)
B
Field: 10.012-Color Space Value8.10.12, Table 53, 7.7.10Table 13 lists the codes and their descriptions for each of the available color spaces used within this standard.
All other color spaces are to be marked as
M10.012-CSP<See Requirement ID: “Field: Image CSP Value>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
2M10.010-TVPS Metadata PNGIF {10.011} EQ ASCII(PNG) AND {10.008} EQ 1 THEN {10.010} EQ {VerticalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF 10.011} EQ ASCII(PNG) AND {10.008} EQ 2
THEN {10.010} EQ {VerticalDensity-PNG} * 0.01 (meters/cm)
t-11B
2M10.010-TVPS Aspect Ratio Metadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {10.008} NEQ 1 OR 2
THEN {10.009}/{10.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
M10.010-TVPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M10.010-TVPS Aspect Ratio Metadata PNGIF {10.011} EQ ASCII(PNG) AND {10.008} NEQ 1 OR 2
THEN {10.009}/{10.010} EQ { HorizontalDensity - PNG} / {VerticalDensity-PNG}
t-11B
Field: 10.011-Compression Algorithm Value8.10.11, Table 53, 7.7.9.3, 7.7.9.4レコードタイプ 10 で伝えられる顔以外の画像では、フィールド 10.011: Compression algorithm / CGA を、WSQ20 を除く、表 12 の任意の値に設定してもよいです。M10.011-CGA<See Requirement ID: “Field: Type10 Compression”>t-2, t-98
Field: 10.011-Compression Algorithm Metadata8.10.11, Table 53<圧縮を使用している場合、CGA は、画像メタデータの圧縮タイプのシグネチャを検査して検証します。>2M10.011-CGAMetadata JPEGB, JPEGLIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(SOI -JPEG,JPEGL)
t-11B
2M10.011-CGA Metadata JP2, JP2LIF {10.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox)t-11B
2M10.011-CGA Metadata PNGIF {10.011} EQ ASCII(PNG) THEN
Present(PNGSig)
B
Field: 10.012-Color Space Value8.10.12, Table 53, 7.7.10表 13 に、この標準内で利用できる各色空間のコードとその説明を列挙します。
それ以外の色空間はすべて、
M10.012-CSP<See Requirement ID: “Field: Image CSP Value>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
undefined.
Field: 10.013-Subject Acquisition Profile Value8.10.13, Table 53, 7.7.5.1<Table 53 lists the value constraints for SAP.>D10.013-SAP<See Requirement ID: “Field: SAP Values”>t-2
Field: 10.013-Subject Acquisition Profile Conditional8.10.13, 7.7.5The Subject Acquisition Profile (SAP) is a mandatory field when Field 10.003: Image type / IMT contains “FACE”. Otherwise, it shall not be entered.D10.013-SAP Conditional<See Requirement ID: “Field: SAP Conditional”>t-2
Field: 10.014-Face Image Position Value8.10.14, Table 53<Table 53 lists the value constraints for FIP.>2M⇑10.014-FIP-Value Subfield 1{US_Subfield:1 in 10.014} GTE 1 AND LTE {10.006}B*
2M⇑10.014-FIP-Value Subfield 2{US_Subfield:2 in 10.014} GTE 1 AND LTE {10.006}B*
2M⇑10.014-FIP-Value Subfield 3{US_Subfield:3 in 10.014)} GTE 1 AND LTE {10.007}B*
2M⇑10.014-FIP-Value Subfield 4{US_Subfield:4 in 10.014)} GT {US_Subfield:3 in 10.014} AND LTE {10.007}B*
2O⇑10.014-FIP-Value Subfield 5{US_Subfield:5 in 10.014)} MO [ASCII(S,H,F,N,X)]B*
Field: 10.014- Face Image Position Conditional8.10.14This field is only appropriate for images that do not comply with SAP Levels 30, 40, 50 or 51.D10.014-FIP Conditional<See Requirement ID: “Field: 10.014-FIP CondCode Dependent”>t-2
Field: 10.015-ReservedTable 53Reserved for future useonly by ANSI/NIST-ITL.-10.015-Reserved<See Requirement ID: “Field: Type10-CondCode>.t-2
Field: 10.016-Scanned Horizontal Pixel Scale Value8.10.15, Table 53<Table 53 lists the value constraints for SHPS.>O10.016-SHPS<See Requirement ID: “Field: Image SHPS Value”>t-2
Field: 10.017-Scanned Verticall Pixel Scale8.10.15, Table 53<Table 53 lists the value constraints for SVPS.>O10.017-SVPS<See Requirement ID: “Field: Image SVPS Value”>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
未定義として示すものとします。
Field: 10.013-Subject Acquisition Profile Value8.10.13, Table 53, 7.7.5.1<表 53 に、SAP の値の制約が列挙されています。>D10.013-SAP<See Requirement ID: “Field: SAP Values”>t-2
Field: 10.013-Subject Acquisition Profile Conditional8.10.13, 7.7.5Subject Acquisition Profile(SAP)は、フィールド 10.003: Image type / IMT に「FACE」が含まれる場合は必須のフィールドです。それ以外の場合は、入力してはなりません。D10.013-SAP Conditional<See Requirement ID: “Field: SAP Conditional”>t-2
Field: 10.014-Face Image Position Value8.10.14, Table 53<表 53 に、FIP の値の制約が列挙されています。>2M⇑10.014-FIP-Value Subfield 1{US_Subfield:1 in 10.014} GTE 1 AND LTE {10.006}B*
2M⇑10.014-FIP-Value Subfield 2{US_Subfield:2 in 10.014} GTE 1 AND LTE {10.006}B*
2M⇑10.014-FIP-Value Subfield 3{US_Subfield:3 in 10.014)} GTE 1 AND LTE {10.007}B*
2M⇑10.014-FIP-Value Subfield 4{US_Subfield:4 in 10.014)} GT {US_Subfield:3 in 10.014} AND LTE {10.007}B*
2O⇑10.014-FIP-Value Subfield 5{US_Subfield:5 in 10.014)} MO [ASCII(S,H,F,N,X)]B*
Field: 10.014- Face Image Position Conditional8.10.14このフィールドは、SAP レベル 30、40、50、または 51 に適合しない画像にのみ適しています。D10.014-FIP Conditional<See Requirement ID: “Field: 10.014-FIP CondCode Dependent”>t-2
Field: 10.015-ReservedTable 53ANSI/NIST-ITL のみによる将来の使用のために予約されています。-10.015-Reserved<See Requirement ID: “Field: Type10-CondCode>.t-2
Field: 10.016-Scanned Horizontal Pixel Scale Value8.10.15, Table 53<表 53 に、SHPS の値の制約が列挙されています。>O10.016-SHPS<See Requirement ID: “Field: Image SHPS Value”>t-2
Field: 10.017-Scanned Verticall Pixel Scale8.10.15, Table 53<表 53 に、SVPS の値の制約が列挙されています。>O10.017-SVPS<See Requirement ID: “Field: Image SVPS Value”>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Value
Field: 10.018-Distortion Value8.10.17, Table 53<Table 53 lists the value constraints for DIST.>1M⇑10.018-DIST- Value Subfield 1{US_Subfield:1 in 10.018} MO [ASCII(Barrel, Inflated, Pincushion)]B*
1M⇑10.018-DIST- Value Subfield 2{US_Subfield:2 in 10.018} EQ ASCII(E) OR ASCII(C)B*
1M⇑10.018-DIST- Value Subfield 3{US_Subfield:3 in 10.018)} MO [ASCII(Mild,Moderate,Severe)]B*
Field: 10.019-Lighting Artifacts Value8.10.18, Table 53<Table 53 lists the value constraints for LAF.>1D10.019-LAF{10.019} MO [ASCII(F,H,R)]B
Field: 10.020-Subject Pose Value8.10.19, Table 56When included, this field shall contain one character code selected from Table 56 to describe the pose of the subject.1D10.020-POS{10.020} MO [ASCII(F,R,L,A,D)]B
Field: YAW POA Opposite8.10.19Note that the offset angle in Field 10.021: Pose offset angle / POA is opposite from the yaw angle in Field 10.025 as indicated by a minus sign.2DFields- YAW POA OppositeIF Present(US_Subfield:4 in 10.025) THEN {10.021} EQ { US_Subfield:4 in 10.025} * -1B*
Field: 10.021- Pose Offset Angle Value8.10.20, Table 53When included, this field shall contain one character code selected from Table 56 to describe the pose of the subject.1D10.021-POA{10.021} GTE -180 AND LTE 180B
Field: 10.022-DeprecatedTable 53Not to be used in new transactions.-10.022-Deprecated<See Requirement ID: “Field: Type10-CondCode>.t-2
Field: 10.023-Photo Acquisition Source Value8.10.21, Table 53, Table 57When included, the first information item in this field shall contain an attribute code selected from Table 57 to describe the source of captured image data.1M⇑10.023-PAS{US_Subfield:1 in 10.023} MO [ASCII(UNSPECIFIED, UNKOWN PHOTO, DIGITAL CAMERA, SCANNER, UNKNOWN VIDEO, ANALOG VIDEO, DIGITAL VIDEO, VENDOR, TYPE20)]B*
Field: 10.023-Photo Acquisition Source VENDOR8.10.21, Table 53, Table 57When “VENDOR” is specified, a second information item may be entered with up to 64 characters to describe the specific source.D10.023-PAS VENDOR<See Requirement ID: “Field: Type10-Subfield Occurrence” and “Field: Type10-Subfield CharCount.>t-2
Field: 10.023-Photo Acquisition8.10.21, Table 53, Table 57When “Type-20” is selected, then Field 10.997: Source representation / SOR shall be contained in this record, and the corresponding Record Type-20 shall be2D10.023-PAS Type-20IF {US_Subfield:1 in 10.023} EQ ASCII(TYPE20) THEN
Present(10.997) AND
Present(Record ST Type(Record) EQ 20)
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Value
Field: 10.018-Distortion Value8.10.17, Table 53<表 53 に、DIST の値の制約が列挙されています。>1M⇑10.018-DIST- Value Subfield 1{US_Subfield:1 in 10.018} MO [ASCII(Barrel, Inflated, Pincushion)]B*
1M⇑10.018-DIST- Value Subfield 2{US_Subfield:2 in 10.018} EQ ASCII(E) OR ASCII(C)B*
1M⇑10.018-DIST- Value Subfield 3{US_Subfield:3 in 10.018)} MO [ASCII(Mild,Moderate,Severe)]B*
Field: 10.019-Lighting Artifacts Value8.10.18, Table 53<表 53 に、LAF の値の制約が列挙されています。>1D10.019-LAF{10.019} MO [ASCII(F,H,R)]B
Field: 10.020-Subject Pose Value8.10.19, Table 56含める場合、このフィールドには、対象者の姿勢を記述するための、表 56 から選んだ 1 文字のコードを含めなければなりません。1D10.020-POS{10.020} MO [ASCII(F,R,L,A,D)]B
Field: YAW POA Opposite8.10.19フィールド 10.021: Pose offset angle / POA のオフセット角は、マイナス記号で示されるとおり、フィールド 10.025 のヨー角とは逆向きであることに注意してください。2DFields- YAW POA OppositeIF Present(US_Subfield:4 in 10.025) THEN {10.021} EQ { US_Subfield:4 in 10.025} * -1B*
Field: 10.021- Pose Offset Angle Value8.10.20, Table 53含める場合、このフィールドには、対象者の姿勢を記述するための、表 56 から選んだ 1 文字のコードを含めなければなりません。1D10.021-POA{10.021} GTE -180 AND LTE 180B
Field: 10.022-DeprecatedTable 53新しい取引では使用しないでください。-10.022-Deprecated<See Requirement ID: “Field: Type10-CondCode>.t-2
Field: 10.023-Photo Acquisition Source Value8.10.21, Table 53, Table 57含める場合、このフィールドの最初の情報項目には、取得した画像データの出所を記述するための、表 57 から選んだ属性コードを含めなければなりません。1M⇑10.023-PAS{US_Subfield:1 in 10.023} MO [ASCII(UNSPECIFIED, UNKOWN PHOTO, DIGITAL CAMERA, SCANNER, UNKNOWN VIDEO, ANALOG VIDEO, DIGITAL VIDEO, VENDOR, TYPE20)]B*
Field: 10.023-Photo Acquisition Source VENDOR8.10.21, Table 53, Table 57「VENDOR」を指定する場合、具体的な出所を記述するために、最大 64 文字の 2 番目の情報項目を入力してもよいです。D10.023-PAS VENDOR<See Requirement ID: “Field: Type10-Subfield Occurrence” and “Field: Type10-Subfield CharCount.>t-2
Field: 10.023-Photo Acquisition8.10.21, Table 53, Table 57「Type-20」を選択する場合、フィールド 10.997: Source representation / SOR をこのレコードに含めなければならず、対応するレコードタイプ 20 を2D10.023-PAS Type-20IF {US_Subfield:1 in 10.023} EQ ASCII(TYPE20) THEN
Present(10.997) AND
Present(Record ST Type(Record) EQ 20)
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Source Type-20included in the transaction.
Field: 10.024-Subject Quality Scores Type-208.10.22, Table 53, 7.7.7<Table 53 lists the value constraints for SQS.>D10.024-SQS<See Requirement ID: “Field: Sample Quality Subfield 1” and “Field: Sample Quality Subfield 2” and “Field: Sample Quality Subfield 3”.>t-2
Field: 10.025-Subject Pose Angles Value8.10.23, Table 53<Table 53 lists the value constraints for SPA.>1M⇑10.025-SPA- Value Subfield 1{US_Subfield:1 in 10.025} GTE -180 AND LTE 180B*
1M⇑10.025-SPA- Value Subfield 2{US_Subfield:2 in 10.025} GTE -90 AND LTE 90B*
1M⇑10.025-SPA- Value Subfield 3{US_Subfield:3 in 10.025)} GTE -180 AND LTE 180B*
1O⇑10.025-SPA- Value Subfield 4 to 6{US_Subfields:4 to 6 in 10.025)} GTE 0 AND LTE 90B*
Field: 10.026-Subject Facial Description Value8.10.24, Table 53, Table 58The value should be selected from the “Attribute code” column of Table 58.D10.026-SXS<Cannot check for values because the standard allows user-defined Alphabetic Text. See Requirement ID: “Field: Type10-Subfield CharType” and “Field: Type10-Subfield CharCount”>t-2
Field: 10.027-Subject Eye Color Value8.10.25, Table 53, Table 14<Table 53 lists the value constraints for SEC.>D10.027-SEC<See Requirement ID: “Field: Image ECL Value”>.t-2
Field: 10.028-Subject Hair Color Value8.10.26, Table 53, Table 59<Table 53 lists the value constraints for SHC.>
When the subject is predominantly bald, but hair color is discernible, then the appropriate hair color attribute code shall follow “BAL” in a second entry.
For streaked hair, use “STR” in the first entry; use the second entry to describe the principal color of the hair.
1M⇑10.028-SHC{US_Subfield:1 in 10.028} MO [ASCII(XXX, BAL, BLK, BLN, BRO, GRY, RED, SDY, WHI, BLU, GRN, ONG, PNK, PLE, STR)]
AND
{US_Subfield:2 in 10.028} MO [ASCII(XXX, BLK, BLN, BRO, GRY, RED, SDY, WHI, BLU, GRN, ONG, PNK, PLE)]
B*
Field: 10.029- 2D Facial Feature Points Value8.10.27, Table 53<Table 53 lists the value constraints for FFP.>
The first information item, feature point type / FPT is a one character value. It is
1M⇑10.029-FFP-Value Subfield 1ForEach(RS_Subfield in 10.029)
{
{US_Subfield:1 in RS_Subfield} EQ 1 OR 2
}
B*
2M10.029-FFP-ForEach(RS_Subfield in 10.029)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Source Type-20取引に含めなければなりません。
Field: 10.024-Subject Quality Scores Type-208.10.22, Table 53, 7.7.7<表 53 に、SQS の値の制約が列挙されています。>D10.024-SQS<See Requirement ID: “Field: Sample Quality Subfield 1” and “Field: Sample Quality Subfield 2” and “Field: Sample Quality Subfield 3”.>t-2
Field: 10.025-Subject Pose Angles Value8.10.23, Table 53<表 53 に、SPA の値の制約が列挙されています。>1M⇑10.025-SPA- Value Subfield 1{US_Subfield:1 in 10.025} GTE -180 AND LTE 180B*
1M⇑10.025-SPA- Value Subfield 2{US_Subfield:2 in 10.025} GTE -90 AND LTE 90B*
1M⇑10.025-SPA- Value Subfield 3{US_Subfield:3 in 10.025)} GTE -180 AND LTE 180B*
1O⇑10.025-SPA- Value Subfield 4 to 6{US_Subfields:4 to 6 in 10.025)} GTE 0 AND LTE 90B*
Field: 10.026-Subject Facial Description Value8.10.24, Table 53, Table 58値は、表 58 の「Attribute code」列から選択すべきです。D10.026-SXS<標準でユーザー定義の Alphabetic Text が認められているため、値を検査できません。Requirement ID: 「Field: Type10-Subfield CharType」および「Field: Type10-Subfield CharCount」を参照>t-2
Field: 10.027-Subject Eye Color Value8.10.25, Table 53, Table 14<表 53 に、SEC の値の制約が列挙されています。>D10.027-SEC<See Requirement ID: “Field: Image ECL Value”>.t-2
Field: 10.028-Subject Hair Color Value8.10.26, Table 53, Table 59<表 53 に、SHC の値の制約が列挙されています。>
対象者がほぼ禿げているものの髪の色を識別できる場合は、2番目の入力で「BAL」の後に適切な髪色の属性コードを記載しなければなりません。
縞状の髪では、最初の入力に「STR」を用い、2番目の入力で髪の主な色を記述します。
1M⇑10.028-SHC{US_Subfield:1 in 10.028} MO [ASCII(XXX, BAL, BLK, BLN, BRO, GRY, RED, SDY, WHI, BLU, GRN, ONG, PNK, PLE, STR)]
AND
{US_Subfield:2 in 10.028} MO [ASCII(XXX, BLK, BLN, BRO, GRY, RED, SDY, WHI, BLU, GRN, ONG, PNK, PLE)]
B*
Field: 10.029- 2D Facial Feature Points Value8.10.27, Table 53<表 53 に、FFP の値の制約が列挙されています。>
最初の情報項目である特徴点タイプ / FPT は 1 文字の値です。これは
1M⇑10.029-FFP-Value Subfield 1ForEach(RS_Subfield in 10.029)
{
{US_Subfield:1 in RS_Subfield} EQ 1 OR 2
}
B*
2M10.029-FFP-ForEach(RS_Subfield in 10.029)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
mandatory. It shall be either
1 = Denoting an MPEG4 Feature point.
2 = Anthropometric landmark. (This is new to this version).
The second information item, feature point code / FPC is 3 to 5 characters. If FPT is 1, this information item shall be “A.B” with A and B defined in Section 8.10.27.1 and illustrated in Figure 12. If FPT is 2, the codes are entered as shown in the “Feature Point ID” column of Table 61. This is one to four alphabetic characters.
⇑Value Subfield 2{
IF({US_Subfield:1 in RS_Subfield} EQ 1 THEN
{US_Subfield:2 in RS_Subfield} MO [Figure 11, Figure 12]
ELSE
{US_Subfield:2 in RS_Subfield} MO [Table 61]
}
1M⇑10.029-FFP-Value Subfield 3ForEach(RS_Subfield in 10.029)
{
{US_Subfield:3 in RS_Subfield} GTE 1 AND LTE {10.006}
}
B*
1M⇑10.029-FFP-Value Subfield 4ForEach(RS_Subfield in 10.029)
{
{US_Subfield:4 in RS_Subfield} GTE 1 AND LTE {10.007}
}
B*
Field: 10.030-Device Monitoring Mode Value8.10.28, Table 53,<Table 53 lists the value constraints for DMM.>O10.030-DMM<See Requirement ID: “Field: Device Monitoring”>.t-2
Field: 10.031-Tiered Markup Collection Value8.10.29, Table 53,<Table 53 lists the value constraints for TMC.>1D10.031-TMC{10.031} MO [1 to 5, 100 to 999]B
Field: 10.032- 3D Facial Feature Points Value8.10.30, Table 53<Table 53 lists the value constraints for 3DF.>
The first information item, feature point type / FPT is a one character value. It is mandatory. It shall be either
1 = Denoting an MPEG4 Feature point, but using a Z coordinate
2 = Anthropometric landmark, with a Z coordinate.
The second information item, feature point code / FPC is 3 to 5 characters. If FPT is 1, this information item shall be “A.B” with A and B defined in
1M⇑10.032-3DF- Value Subfield 1ForEach(RS_Subfield in 10.032)
{
{US_Subfield:1 in RS_Subfield} EQ 1 OR 2
}
B*
2M⇑10.032-3DF- Value Subfield 2ForEach(RS_Subfield in 10.032)
{
IF({US_Subfield:1 in RS_Subfield} EQ 1 THEN
{US_Subfield:2 in RS_Subfield} MO [Figure 11, Figure 12]
ELSE
{US_Subfield:2 in RS_Subfield} MO [Table 61]
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
必須です。次のいずれかでなければなりません。
1 = MPEG4 特徴点を示します。
2 = 人体計測ランドマーク。(このバージョンで新たに追加されました。)
2 番目の情報項目である特徴点コード / FPC は 3〜5 文字です。FPT が 1 の場合、この情報項目は「A.B」でなければならず、A と B は 8.10.27.1 節で定義され、図 12 に示されています。FPT が 2 の場合、コードは表 61 の「Feature Point ID」列に示すとおりに入力します。これは 1〜4 文字の英字です。
⇑Value Subfield 2{
IF({US_Subfield:1 in RS_Subfield} EQ 1 THEN
{US_Subfield:2 in RS_Subfield} MO [Figure 11, Figure 12]
ELSE
{US_Subfield:2 in RS_Subfield} MO [Table 61]
}
1M⇑10.029-FFP-Value Subfield 3ForEach(RS_Subfield in 10.029)
{
{US_Subfield:3 in RS_Subfield} GTE 1 AND LTE {10.006}
}
B*
1M⇑10.029-FFP-Value Subfield 4ForEach(RS_Subfield in 10.029)
{
{US_Subfield:4 in RS_Subfield} GTE 1 AND LTE {10.007}
}
B*
Field: 10.030-Device Monitoring Mode Value8.10.28, Table 53,<表 53 は DMM の値の制約を列挙しています。>O10.030-DMM<要件 ID: “Field: Device Monitoring” を参照してください。>t-2
Field: 10.031-Tiered Markup Collection Value8.10.29, Table 53,<表 53 は TMC の値の制約を列挙しています。>1D10.031-TMC{10.031} MO [1 to 5, 100 to 999]B
Field: 10.032- 3D Facial Feature Points Value8.10.30, Table 53<表 53 は 3DF の値の制約を列挙しています。>
最初の情報項目である特徴点タイプ / FPT は 1 文字の値です。必須です。次のいずれかでなければなりません。
1 = MPEG4 特徴点を示します。ただし Z 座標を使用します
2 = 人体計測ランドマーク。Z 座標を伴います。
2 番目の情報項目である特徴点コード / FPC は 3〜5 文字です。FPT が 1 の場合、この情報項目は「A.B」でなければならず、A と B は
1M⇑10.032-3DF- Value Subfield 1ForEach(RS_Subfield in 10.032)
{
{US_Subfield:1 in RS_Subfield} EQ 1 OR 2
}
B*
2M⇑10.032-3DF- Value Subfield 2ForEach(RS_Subfield in 10.032)
{
IF({US_Subfield:1 in RS_Subfield} EQ 1 THEN
{US_Subfield:2 in RS_Subfield} MO [Figure 11, Figure 12]
ELSE
{US_Subfield:2 in RS_Subfield} MO [Table 61]
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Section 8.10.27.1 and illustrated in Figure 12. If FPT is 2, the codes are entered as shown in the “Feature Point ID” column of Table 61. This is one to four alphabetic characters.}
1M⇑10.032-3DF- Value Subfield 3ForEach(RS_Subfield in 10.032)
{
{US_Subfield:3 in RS_Subfield} GTE 1 AND LTE {10.006}
}
B*
1M⇑10.032-3DF- Value Subfield 4ForEach(RS_Subfield in 10.032)
{
{US_Subfield:4 in RS_Subfield} GTE 1 AND LTE {10.007}
}
B*
1M⇑10.032-3DF- Value Subfield 5ForEach(RS_Subfield in 10.032)
{
{US_Subfield:5 in RS_Subfield} GTE 1 AND LTE 65534
}
B*
Field: 10.033-Feature Contours Value8.10.31, Table 53. Table 15<Table 53 lists the value constraints for3DF.>1M⇑10.033-FEC- Value Subfield 1ForEach(RS_Subfield in 10.033)
{
{US_Subfield:1 in RS_Subfield} MO [ASCII(eyetop, eyebottom, upperliptop, upperlipbottom, lowerliptop, lowerlipbottom, rightnostril, leftnostril, lefteyebrow, righteyebrow, chin, faceoutline]
}
B*
1M⇑10.033-FEC- Value Subfield 2ForEach(RS_Subfield in 10.033)
{
{US_Subfield:2 in RS_Subfield} MO [3 to 99]
}
B*
1M⇑10.033-FEC- Value Subfield PairForEach(RS_Subfield in 10.033)
{
For(X EQ 3 to {US_Subfield:2 in RS_Subfield})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {10.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {10.006}
}
}
B*
Field: 10.034 to 10.037-ReservedTable 53Reserved for future useonly by ANSI/NIST-ITL.-10.034 to 10.037-Reserved<See Requirement ID: “Field: Type10-CondCode>.t-2
Field: 10.038-Comment8.10.32, 7.4.4 Table 53<Table 53 lists the value constraints for COM.>O10.038-COM<See Requirement ID: “Field: Comment”>.t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.10.27.1 節で定義され、図 12 に示されています。FPT が 2 の場合、コードは表 61 の「Feature Point ID」列に示すとおりに入力します。これは 1〜4 文字の英字です。}
1M⇑10.032-3DF- Value Subfield 3ForEach(RS_Subfield in 10.032)
{
{US_Subfield:3 in RS_Subfield} GTE 1 AND LTE {10.006}
}
B*
1M⇑10.032-3DF- Value Subfield 4ForEach(RS_Subfield in 10.032)
{
{US_Subfield:4 in RS_Subfield} GTE 1 AND LTE {10.007}
}
B*
1M⇑10.032-3DF- Value Subfield 5ForEach(RS_Subfield in 10.032)
{
{US_Subfield:5 in RS_Subfield} GTE 1 AND LTE 65534
}
B*
Field: 10.033-Feature Contours Value8.10.31, Table 53. Table 15<表 53 は 3DF の値の制約を列挙しています。>1M⇑10.033-FEC- Value Subfield 1ForEach(RS_Subfield in 10.033)
{
{US_Subfield:1 in RS_Subfield} MO [ASCII(eyetop, eyebottom, upperliptop, upperlipbottom, lowerliptop, lowerlipbottom, rightnostril, leftnostril, lefteyebrow, righteyebrow, chin, faceoutline]
}
B*
1M⇑10.033-FEC- Value Subfield 2ForEach(RS_Subfield in 10.033)
{
{US_Subfield:2 in RS_Subfield} MO [3 to 99]
}
B*
1M⇑10.033-FEC- Value Subfield PairForEach(RS_Subfield in 10.033)
{
For(X EQ 3 to {US_Subfield:2 in RS_Subfield})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {10.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {10.006}
}
}
B*
Field: 10.034 to 10.037-ReservedTable 53ANSI/NIST-ITL のみによる将来の使用のために予約されています。-10.034 to 10.037-Reserved<要件 ID: “Field: Type10-CondCode を参照してください。>t-2
Field: 10.038-Comment8.10.32, 7.4.4 Table 53<表 53 は COM の値の制約を列挙しています。>O10.038-COM<要件 ID: “Field: Comment” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Value
Field: 10.039-Type-10 Reference Number Value8.10.33, Table 53<Table 53 lists the value constraints for T10.>1D10.039-T10{10.039} MO [1 to 255]B
Field: 10.040- NCIC SMT Code Value8.10.34, Table 53, Table 98<Table 53 lists the value constraints for SMT.>1D10.040-T10ForEach(US_Subfield in 10.040)
{
{US_Subfield} MO [Table 98]
}
B*
Field: 10.041- SMT Size Value8.10.35, Table 53<Table 53 lists the value constraints for SMS.>1D10.041-SMSForEach(US_Subfield in 10.041)
{
{US_Subfield} GTE 1 AND MO[Integers]
}
B*
Field: 10.042- SMT Descriptors Value8.10.36, Table 53, Table 54, Table 63<Table 53 lists the value constraints for SMD.>1M⇑10.042-SMD- Value Subfield 1ForEach(RS_Subfield in 10.042)
{
{US_Subfield:1 in RS_Subfield} MO [ASCII(SCAR,PIERCING, TATTOO, CHEMICAL, BRANDED, CUT)]
}
B*
1D10.042-SMD- Value Subfield 2ForEach(RS_Subfield in 10.042)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII(Human, Animal, Plant, Flag, Object, Abstract, Symbol, Other) ]
}
B*
2D10.042-SMD- Value Subfield 3ForEach(RS_Subfield in 10.042)
{
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(HUMAN)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(MFACE,FFACE, ABFACE, MBODY, FBODY, ABBODY, ROLES, SPORT, MBPART, FBPART, ABBPART, MHUMAN, SKULL)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(ANIMAL)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(CAT, DOG, DOMESTIC, VICIOUS, HORSE, WILD, SNAKE, DRAGON, BIRD, INSECT, ABSTRACT, PARTS, MANIMAL)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Value
Field: 10.039-Type-10 Reference Number Value8.10.33, Table 53<表 53 は T10 の値の制約を列挙しています。>1D10.039-T10{10.039} MO [1 to 255]B
Field: 10.040- NCIC SMT Code Value8.10.34, Table 53, Table 98<表 53 は SMT の値の制約を列挙しています。>1D10.040-T10ForEach(US_Subfield in 10.040)
{
{US_Subfield} MO [Table 98]
}
B*
Field: 10.041- SMT Size Value8.10.35, Table 53<表 53 は SMS の値の制約を列挙しています。>1D10.041-SMSForEach(US_Subfield in 10.041)
{
{US_Subfield} GTE 1 AND MO[Integers]
}
B*
Field: 10.042- SMT Descriptors Value8.10.36, Table 53, Table 54, Table 63<表 53 は SMD の値の制約を列挙しています。>1M⇑10.042-SMD- Value Subfield 1ForEach(RS_Subfield in 10.042)
{
{US_Subfield:1 in RS_Subfield} MO [ASCII(SCAR,PIERCING, TATTOO, CHEMICAL, BRANDED, CUT)]
}
B*
1D10.042-SMD- Value Subfield 2ForEach(RS_Subfield in 10.042)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII(Human, Animal, Plant, Flag, Object, Abstract, Symbol, Other) ]
}
B*
2D10.042-SMD- Value Subfield 3ForEach(RS_Subfield in 10.042)
{
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(HUMAN)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(MFACE,FFACE, ABFACE, MBODY, FBODY, ABBODY, ROLES, SPORT, MBPART, FBPART, ABBPART, MHUMAN, SKULL)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(ANIMAL)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(CAT, DOG, DOMESTIC, VICIOUS, HORSE, WILD, SNAKE, DRAGON, BIRD, INSECT, ABSTRACT, PARTS, MANIMAL)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
ASCII(PLANT)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(NARCOTICS, REDFL, BLUEFL, YELFL, DRAW, ROSE, TULIP, LILY, MPLANT)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(FLAG) THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(USA, STATE, NAZI, CONFED, BRIT, MFLAG)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(Object)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(FIRE, WEAP,PLANE,VESSEL,TRAIN,VEHICLE,MYTH,SPORT,NATURE, MOBJECTS)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(Abstract)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(FIGURE, SLEEVE, BRACE, ANKLET, NECKLC, SHIRT, BODBND, HEDBND, MABSTRACT)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(Symbol)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(NATION, POLITIC, MILITARY, FRATERNAL, PROFESS, GANG, MSYMBOLS)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(OTHER)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(WORDING, FREEFRM, MISC)]
}
1D10.042-SMD- Value Subfield 4TRUEB*
Field: 10.042- SMT Descriptors Subfields Dependent8.10.36, Table 53…does not apply to scars and marks.D10.042-Subfields Dependent<See Requirement ID: “Field: Type10-Subfield Occurrence” >t-2
Field:8.10.37,<Table 53 lists the value constraints for1-10.043-ForEach(US_Subfield in 10.043)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
ASCII(PLANT)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(NARCOTICS, REDFL, BLUEFL, YELFL, DRAW, ROSE, TULIP, LILY, MPLANT)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(FLAG) THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(USA, STATE, NAZI, CONFED, BRIT, MFLAG)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(Object)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(FIRE, WEAP,PLANE,VESSEL,TRAIN,VEHICLE,MYTH,SPORT,NATURE, MOBJECTS)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(Abstract)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(FIGURE, SLEEVE, BRACE, ANKLET, NECKLC, SHIRT, BODBND, HEDBND, MABSTRACT)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(Symbol)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(NATION, POLITIC, MILITARY, FRATERNAL, PROFESS, GANG, MSYMBOLS)]
ELSE
IF {US_Subfield:2 in RS_Subfield} EQ ASCII(OTHER)
THEN
{US_Subfield:3 in RS_Subfield} MO [ASCII(WORDING, FREEFRM, MISC)]
}
1D10.042-SMD- Value Subfield 4TRUEB*
Field: 10.042- SMT Descriptors Subfields Dependent8.10.36, Table 53…は傷跡およびマークには適用されません。D10.042-Subfields Dependent<要件 ID: “Field: Type10-Subfield Occurrence” を参照してください。>t-2
Field:8.10.37,<表 53 は、値の制約を列挙しています。対象は1-10.043-ForEach(US_Subfield in 10.043)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
10.043-Tattoo Color ValueTable 53COL.>COL- Value{
{US_Subfield} MO [BLACK, BROWN, GRAY, BLUE, GREEN, ORANGE, PURPLE, RED, YELLOW, WHITE, MULTI, OUTLINE]
}
Field: 10.044-Image Transform Value8.10.38, Table 53, Table 65<Table 53 lists the value constraints for ITX.>1M⇑10.044-ITX-ValueForEach(US_Subfield in 10.044)
{
{US_Subfield} MO [AGE, AXIS, COLORSHIFT, CONTRAST, CROP, DIST, DOWNSAMPLE, GRAY, ILLUM, IMGFUSE, INTERPOLATE, MULTCOMP, MULTIVIEW, POSE, ROTATE, SNIR, SUPERRES, WHITE]
}
B*
Field: 10.045-Occlusions Value8.10.30, Table 17, Table 18<Table 53 lists the value constraints for OCC.>1M⇑10.045-OCC- Value Subfield 1ForEach(RS_Subfield in 10.045)
{
{US_Subfield:1 in RS_Subfield} MO [ASCII(T, I, L, S)]
}
B*
1M⇑10.045-OCC- Value Subfield 2ForEach(RS_Subfield in 10.045)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII(H,S,C,R,O)]
}
B*
1M⇑10.045-OCC- Value Subfield 3ForEach(RS_Subfield in 10.045)
{
{US_Subfield:3 in RS_Subfield} GTE 2 AND LTE 99
}
B*
1M⇑10.045-OCC- Value Subfield PairsForEach(RS_Subfield in 10.045)
{
For(X EQ 1 to (US_Subfield:3 in RS_Subfield})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {10.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {10.006}
}
}
B*
Field: 10.046 to 10.199-ReservedTable 53Reserved for future useonly by ANSI/NIST-ITL.-10.046 to 10.199-Reserved<See Requirement ID: “Field: Type10-CondCode>.t-2
Field: 10.200 to 10.900-User DefinedTable 53User Defined Fields--10.200 to 10.900-User DefinedTRUEB
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
10.043-Tattoo Color ValueTable 53COL です。>COL- Value{
{US_Subfield} MO [BLACK, BROWN, GRAY, BLUE, GREEN, ORANGE, PURPLE, RED, YELLOW, WHITE, MULTI, OUTLINE]
}
Field: 10.044-Image Transform Value8.10.38, Table 53, Table 65<表 53 は ITX の値の制約を列挙しています。>1M⇑10.044-ITX-ValueForEach(US_Subfield in 10.044)
{
{US_Subfield} MO [AGE, AXIS, COLORSHIFT, CONTRAST, CROP, DIST, DOWNSAMPLE, GRAY, ILLUM, IMGFUSE, INTERPOLATE, MULTCOMP, MULTIVIEW, POSE, ROTATE, SNIR, SUPERRES, WHITE]
}
B*
Field: 10.045-Occlusions Value8.10.30, Table 17, Table 18<表 53 は OCC の値の制約を列挙しています。>1M⇑10.045-OCC- Value Subfield 1ForEach(RS_Subfield in 10.045)
{
{US_Subfield:1 in RS_Subfield} MO [ASCII(T, I, L, S)]
}
B*
1M⇑10.045-OCC- Value Subfield 2ForEach(RS_Subfield in 10.045)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII(H,S,C,R,O)]
}
B*
1M⇑10.045-OCC- Value Subfield 3ForEach(RS_Subfield in 10.045)
{
{US_Subfield:3 in RS_Subfield} GTE 2 AND LTE 99
}
B*
1M⇑10.045-OCC- Value Subfield PairsForEach(RS_Subfield in 10.045)
{
For(X EQ 1 to (US_Subfield:3 in RS_Subfield})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {10.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {10.006}
}
}
B*
Field: 10.046 to 10.199-ReservedTable 53ANSI/NIST-ITL のみによる将来の使用のために予約されています。-10.046 to 10.199-Reserved<要件 ID: “Field: Type10-CondCode を参照してください。>t-2
Field: 10.200 to 10.900-User DefinedTable 53User Defined Fields--10.200 to 10.900-User DefinedTRUEB
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Field: 10.901 ReservedTable 53Reserved for future useonly by ANSI/NIST-ITL.-10.901-Reserved<See Requirement ID: “Field: Type10-CondCode>.t-2
Field: 10.902-Annotated Information Value8.10.41, Table 53This is an optional field, listing the operations performed on the original source in order to prepare it for inclusion in a biometric record type. See Section 7.4.1.O10.902-ANN-Value<See Requirement ID: “Field: xx.902-ANN” >.t-2
Field: 10.903-Device Unique Identifier Value8.10.42, Table 53This is an optional field. See Section 7.7.1.1.O10.903-DUI Value<See Requirement ID: “Field: Device ID” >.t-2
Field: 10.904-Make/Model/Serial Number Value8.10.43, Table 53This is an optional field. See Section 7.7.1.2.O10.904-MMS Value<See Requirement ID: “Field: Make Model” >.t-2
Field: 10.905 to 10.994-ReservedTable 53Reserved for future useonly by ANSI/NIST-ITL.-10.905 to 10.994-Reserved<See Requirement ID: “Field: Type10-CondCode>.t-2
Field: 10.995-Associated Context Value8.10.44, Table 53See Section 7.3.3O10.995-ASC Value<See Requirement IDs: “Field: xx.995-ASC” and “Field: xx.995-ASC-ACN” and
“Field: xx.995-ASC-ASP”>.
t-2
Field: 10.996-Hash Value8.10.45, Table 53See Section 7.5.2O10.996-HAS Value<See Requirement ID: “Field: HAS”>t-2
Field: 10.997-Source Representation Value8.10.46, Table 53See Section 7.3.2O10.997-SOR Value<See Requirement IDs: “Field: xx.997-SOR” and “Field: xx.997-SOR-SRN” and
“Field: xx.997-SOR-RSP”>.
t-2
Field: 10.998-Geographic Sample Acquisition Location Value8.10.47, Table 53See Section 7.7.3O10.998-GEO Value<See Requirement IDs: “Field: Geographic”, “Field: Geographic-Conditional”, “Field: Geographic-Subfield 1” through “Field: Geographic-Values-SubField 15” >.t-2
Field: 10.999-Image Data Valid8.10.48, 7.7.9.4, Table 53This is a mandatory field contains the image.
For non-facial images conveyed in Record
2M10.999-DATA Uncompressed ValidIF {10.011} EQ ASCII(NONE) THEN
Length(10.999) EQ 10.006} * {10.007}
B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Field: 10.901 ReservedTable 53ANSI/NIST-ITL のみによる将来の使用のために予約されています。-10.901-Reserved<要件 ID: “Field: Type10-CondCode> を参照してください。t-2
Field: 10.902-Annotated Information Value8.10.41, Table 53これは任意のフィールドで、元の情報源に対して行った、生体情報レコードタイプに含めるための準備操作を列挙します。7.4.1 節を参照してください。O10.902-ANN-Value<要件 ID: “Field: xx.902-ANN” > を参照してください。t-2
Field: 10.903-Device Unique Identifier Value8.10.42, Table 53これは任意のフィールドです。7.7.1.1 節を参照してください。O10.903-DUI Value<要件 ID: “Field: Device ID” > を参照してください。t-2
Field: 10.904-Make/Model/Serial Number Value8.10.43, Table 53これは任意のフィールドです。7.7.1.2 節を参照してください。O10.904-MMS Value<要件 ID: “Field: Make Model” > を参照してください。t-2
Field: 10.905 to 10.994-ReservedTable 53ANSI/NIST-ITL のみによる将来の使用のために予約されています。-10.905 to 10.994-Reserved<要件 ID: “Field: Type10-CondCode> を参照してください。t-2
Field: 10.995-Associated Context Value8.10.44, Table 537.3.3 節を参照してください。O10.995-ASC Value<要件 ID: “Field: xx.995-ASC” および “Field: xx.995-ASC-ACN” および
“Field: xx.995-ASC-ASP”> を参照してください。
t-2
Field: 10.996-Hash Value8.10.45, Table 537.5.2 節を参照してください。O10.996-HAS Value<要件 ID: “Field: HAS”> を参照してください。t-2
Field: 10.997-Source Representation Value8.10.46, Table 537.3.2 節を参照してください。O10.997-SOR Value<要件 ID: “Field: xx.997-SOR” および “Field: xx.997-SOR-SRN” および
“Field: xx.997-SOR-RSP”> を参照してください。
t-2
Field: 10.998-Geographic Sample Acquisition Location Value8.10.47, Table 537.7.3 節を参照してください。O10.998-GEO Value<要件 ID: “Field: Geographic”, “Field: Geographic-Conditional”, “Field: Geographic-Subfield 1” から “Field: Geographic-Values-SubField 15” まで> を参照してください。t-2
Field: 10.999-Image Data Valid8.10.48, 7.7.9.4, Table 53これは必須フィールドで、画像を含みます。
非顔画像をレコード
2M10.999-DATA Uncompressed ValidIF {10.011} EQ ASCII(NONE) THEN
Length(10.999) EQ 10.006} * {10.007}
B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Type-10, Field 10.011: Compression algorithm/ CGA may be set to any value in Table 12, except WSQ20.
<The image metadata is checked for validity.>
2M10.999-DATA JPEG-JPEGL ValidIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(JFIF,
SOI-JPEGB,JPEGL,
SOF-JPEGB,JPEGL,
EOI-JPEG, JPEGL)
t-11B
2M10.999-DATA JP2-JP2L ValidIF {10.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox,
HeadBox,
ImgBox)
t-11B
2M10.999-DATA PNG ValidIF {10.011} EQ ASCII(PNG) THEN
Present(PNGSig,
IHDR,
IDAT,
IEND)
B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Type-10 で伝送する場合、Field 10.011: Compression algorithm/ CGA は、WSQ20 を除き、表12に記載された任意の値に設定してもよいです。
<画像メタデータが有効かどうかを確認します。>
2M10.999-DATA JPEG-JPEGL ValidIF {10.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(JFIF,
SOI-JPEGB,JPEGL,
SOF-JPEGB,JPEGL,
EOI-JPEG, JPEGL)
t-11B
2M10.999-DATA JP2-JP2L ValidIF {10.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox,
HeadBox,
ImgBox)
t-11B
2M10.999-DATA PNG ValidIF {10.011} EQ ASCII(PNG) THEN
Present(PNGSig,
IHDR,
IDAT,
IEND)
B

Table C.10 - Assertions for Record Type 11 - Reserved for Voice

表 C.10 - Record Type 11(音声用に予約)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.11: Record Type-11: Reserved for voice
Transaction: Type11 Zero Occurrences8.11Reserved for voice. A committee was established at the second Workshop for this version of the standard, held March 1-3, 2011 to develop specifications for this record type.MType11-Zero Occurrences<See Requirement ID “Transaction: Reserved Records”>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.11: Record Type-11: 音声用に予約
Transaction: Type11 Zero Occurrences8.11音声用に予約されています。このバージョンの規格のための第 2 回ワークショップ(2011 年 3 月 1〜3 日開催)で、このレコードタイプの仕様を策定する委員会が設置されました。MType11-Zero Occurrences<要件 ID: “Transaction: Reserved Records” を参照してください。>t-2

Table C.11 - Assertions for Record Type 12 - Reserved for Dental Records

表 C.11 - Record Type 12(歯科記録用に予約)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.12: Record Type-12: Reserved for dental records
Transaction: Type12 Zero Occurrences8.12Reserved for dental records. A committee was established at the second Workshop for this version of the standard, held March 1-3, 2011 to develop specifications for this record type.MType12-Zero Occurrences<See Requirement ID “Transaction: Reserved Records”>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.12: Record Type-12: 歯科記録用に予約
Transaction: Type12 Zero Occurrences8.12歯科記録用に予約されています。このバージョンの規格のための第 2 回ワークショップ(2011 年 3 月 1〜3 日開催)で、このレコードタイプの仕様を策定する委員会が設置されました。MType12-Zero Occurrences<要件 ID: “Transaction: Reserved Records” を参照してください。>t-2

Table C.12 - Assertions for Record Type 13 - Friction-Ridge Latent Image Record

表 C.12 - Record Type 13(摩擦隆線の遺留画像レコード)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.13: Record Type-13: Friction-ridge latent image record
Field: Type13-Subfield OccureneceTable 66<Table 66 specifies which fields contain subfields as well as the number of occurrences permitted.>1-Type13-Subfields ZeroCount(Subfields in 13.[001 to 003, 005 to 012, 016, 017, 020, 903, 996, 999]) EQ 0T
1M13.004-SubfieldsCount(US_Subfields in 13.004) EQ 1 OR 2T
1M13.013-SubfieldsCount(US_Subfields in 13.013 ) MO [1 to 6]T
1D13.014-SubfieldsCount(RS_Subfields in 13.014) MO [1 to 9]
AND
ForEach(RS_Subfield in 13.014)
{
Count(US_Subfields in RS_Subfield) EQ 2
}
T
D13.015-Subfields<See Requirement ID: “Field: PPC-Subfield Occurrences”>t-2
1O13.024-SubfieldsCount(RS_Subfields in 13.024) MO [1 to 9]
AND
ForEach(RS_Subfield in 13.024)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O13.902-SubfieldsCount (RS_Subfields in 13.902) GTE 1
AND
ForEach(RS_Subfield in 13.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O13.904-Count(US_Subfields in 13.904) EQ 3T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.13: Record Type-13: 摩擦隆線の遺留画像レコード
Field: Type13-Subfield OccureneceTable 66<表 66 は、どのフィールドがサブフィールドを含むか、および許容される出現回数を規定しています。>1-Type13-Subfields ZeroCount(Subfields in 13.[001 to 003, 005 to 012, 016, 017, 020, 903, 996, 999]) EQ 0T
1M13.004-SubfieldsCount(US_Subfields in 13.004) EQ 1 OR 2T
1M13.013-SubfieldsCount(US_Subfields in 13.013 ) MO [1 to 6]T
1D13.014-SubfieldsCount(RS_Subfields in 13.014) MO [1 to 9]
AND
ForEach(RS_Subfield in 13.014)
{
Count(US_Subfields in RS_Subfield) EQ 2
}
T
D13.015-Subfields<要件 ID: “Field: PPC-Subfield Occurrences” を参照してください。>t-2
1O13.024-SubfieldsCount(RS_Subfields in 13.024) MO [1 to 9]
AND
ForEach(RS_Subfield in 13.024)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O13.902-SubfieldsCount (RS_Subfields in 13.902) GTE 1
AND
ForEach(RS_Subfield in 13.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O13.904-Count(US_Subfields in 13.904) EQ 3T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Subfields
1O13.995-SubfieldsCount(RS_Subfields in 13.995) MO [1 to 255]
AND
ForEach(RS_Subfield in 13.995)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
1O13.997-SubfieldsCount(RS_Subfields in 13.997) MO [1 to 255]
AND
ForEach(RS_Subfield in 13.997)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
O13.998-Subfields<See Requirement ID: “Field: Geographic-Conditional”>t-2
Field: Type13-CondCodeTable 66<Table 66 specifies the Condition Code for each field.>1-Type13-CondCodePresent(13.001 to 13.013, 13.999)
AND
NOT Present(13.018, 13.019, 13.021 to 13.023, 13.025 to 13.199, 13.901, 13.905 to 13.994)
B
Field: 13.014-Search Position Descriptors DependentTable 66, 8.13.14This field shall be present if and only if the finger position code “19” appears in Field 13.013: Friction ridge generalized position / FGP.D13.014-CondCode Dependent<See Requirement ID: “Field: SPD,PPC Conditional”>t-2
Field: 13.015-Print Position Coordinates DependentTable 53, 8.13.14This field may be present if and only if the finger position code “19” appears in Field 13.013: Friction ridge generalized position / FGP.D13.015-CondCode Dependent<See Requirement ID: “Field: SPD,PPC Conditional”>t-2
Field: Type13-CharType8.13, Table 66<Table 66 specifies the Character Type for each field that contains no subfields. Note that even though some Character Types are listed as U (user defined), they may still have character type limitations defined in the standard text. >1-Type13-CharType NBytes(13.[001,002,003, 005 to 010, 012, 016, 017]) MO [0x30 to 0x39]B
1-Type13-CharType ABytes(13.011) MO [0x41 to 0x5A, 0x61 to 0x7A]B
1-Type13-CharType UPresent(Bytes(13.020)B
1O13.903-CharType Text ANSBytes(10.903) MO [0x20, 0x7E]B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Subfields
1O13.995-SubfieldsCount(RS_Subfields in 13.995) MO [1 to 255]
AND
ForEach(RS_Subfield in 13.995)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
1O13.997-SubfieldsCount(RS_Subfields in 13.997) MO [1 to 255]
AND
ForEach(RS_Subfield in 13.997)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
O13.998-Subfields<要件 ID: “Field: Geographic-Conditional”> を参照してください。t-2
Field: Type13-CondCodeTable 66<表 66 は、各フィールドの条件コードを規定しています。>1-Type13-CondCodePresent(13.001 to 13.013, 13.999)
AND
NOT Present(13.018, 13.019, 13.021 to 13.023, 13.025 to 13.199, 13.901, 13.905 to 13.994)
B
Field: 13.014-Search Position Descriptors DependentTable 66, 8.13.14このフィールドは、指位置コード「19」が Field 13.013: Friction ridge generalized position / FGP に現れる場合、かつその場合に限り、存在しなければなりません。D13.014-CondCode Dependent<要件 ID: “Field: SPD,PPC Conditional”> を参照してください。t-2
Field: 13.015-Print Position Coordinates DependentTable 53, 8.13.14このフィールドは、指位置コード「19」が Field 13.013: Friction ridge generalized position / FGP に現れる場合、かつその場合に限り、存在してもよいです。D13.015-CondCode Dependent<要件 ID: “Field: SPD,PPC Conditional”> を参照してください。t-2
Field: Type13-CharType8.13, Table 66<表 66 は、サブフィールドを含まない各フィールドの文字種別を規定しています。文字種別が U(ユーザー定義)と記載されているものでも、規格本文で文字種別の制限が定義されている場合があります。>1-Type13-CharType NBytes(13.[001,002,003, 005 to 010, 012, 016, 017]) MO [0x30 to 0x39]B
1-Type13-CharType ABytes(13.011) MO [0x41 to 0x5A, 0x61 to 0x7A]B
1-Type13-CharType UPresent(Bytes(13.020)B
1O13.903-CharType Text ANSBytes(10.903) MO [0x20, 0x7E]B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1O13.996-CharType HBytes(10.996) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]B
Field: Type13-Subfield CharType8.13, Table 66<Table 66 specifies the Character Type for each subfield.>1M13.004-Subfield CharType UPresent( Bytes( US_Subfields:1,2 in 13.004 )B*
1M13.013-Subfield CharType NBytes(All(US_Subfields in 13.013)) MO [0x30 to 0x39]B*
1D13.014-Subfield CharType ANForEach(RS_Subfield in 13.014)
{
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39]
AND
Bytes(US_Subfield:2 in RS_Subfield) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
}
B*
1D13.015-Subfield CharType ANForEach(RS_Subfield in 13.015)
{
Bytes(US_Subfields:1,2 in RS_Subfield)) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
AND
Bytes(US_Subfields:3 to 6 in RS_Subfield)) MO [0x30 to 0x39]
}
B*
1O13.024-Subfield CharType HNForEach(RS_Subfield in 13.024)
{
Bytes(US_Subfields:1,2,4 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:3 in RS_Subfield)) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1O13.902-Subfield CharType ANUForEach(RS_Subfield in 13.902)
{
Present(Bytes(US_Subfields:2 to 4 in RS_Subfield))
AND
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39, 0x5A]
}
B*
1O13.904-Subfield CharType UPresent(Bytes(All(US_Subfields in 13.904)))B*
1O13.995-Subfield CharType NBytes(All(US_Subfields:1,2 in 13.995)) MO [0x30 to 0x39]B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1O13.996-CharType HBytes(10.996) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]B
Field: Type13-Subfield CharType8.13, Table 66<表 66 は、各サブフィールドの文字種別を規定しています。>1M13.004-Subfield CharType UPresent( Bytes( US_Subfields:1,2 in 13.004 )B*
1M13.013-Subfield CharType NBytes(All(US_Subfields in 13.013)) MO [0x30 to 0x39]B*
1D13.014-Subfield CharType ANForEach(RS_Subfield in 13.014)
{
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39]
AND
Bytes(US_Subfield:2 in RS_Subfield) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
}
B*
1D13.015-Subfield CharType ANForEach(RS_Subfield in 13.015)
{
Bytes(US_Subfields:1,2 in RS_Subfield)) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
AND
Bytes(US_Subfields:3 to 6 in RS_Subfield)) MO [0x30 to 0x39]
}
B*
1O13.024-Subfield CharType HNForEach(RS_Subfield in 13.024)
{
Bytes(US_Subfields:1,2,4 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:3 in RS_Subfield)) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1O13.902-Subfield CharType ANUForEach(RS_Subfield in 13.902)
{
Present(Bytes(US_Subfields:2 to 4 in RS_Subfield))
AND
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39, 0x5A]
}
B*
1O13.904-Subfield CharType UPresent(Bytes(All(US_Subfields in 13.904)))B*
1O13.995-Subfield CharType NBytes(All(US_Subfields:1,2 in 13.995)) MO [0x30 to 0x39]B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1O13.997-Subfield CharType NBytes(All(US_Subfields:1,2 in 13.997)) MO [0x30 to 0x39]B*
O13.998-Subfield CharType ANSU<See Requirement ID: “Field: Geographic”>t-2
Field: Type13-CharCountTable 66<Table 66 specifies the Character Count for each field that contains no subfields.>1M13.001-CharCountDataLength(13.001) GTE 1B
1M13.002-CharCountDataLength(13.002) EQ 1 OR 2B
1M13.003-CharCountDataLength(13.003) EQ 1 OR 2B
1M13.005-CharCountDataLength(13.005) EQ 8B
1M13.006-CharCountDataLength(13.006) MO [2 to 5]B
1M13.007-CharCountDataLength(13.007) MO [2 to 5]B
1M13.008-CharCountDataLength(13.008) EQ 1B
1M13.009-CharCountDataLength(13.009) MO [1 to 5]B
1M13.010-CharCountDataLength(13.010) MO [1 to 5]B
1M13.011-CharCountDataLength(13.011) MO [3 to 5]B
1M13.012-CharCountDataLength(13.012) EQ 1 OR 2B
1O13.016-CharCountDataLength(13.016) MO [1 to 4]B
1O13.017-CharCountDataLength(13.017) MO [1 to 4]B
1O13.020-CharCountDataLength(13.020) MO [1 to 126]B
1O13.903-CharCountDataLength(13.903) MO [13 to 16]B
1O13.996-CharCountDataLength(13.995) EQ 64B
1M13.999-CharCountDataLength(13.999) GTE 1B
Field: Type13-Table 66<Table 66 specifies the Character Count for each subfield.>2M13.004-SubfieldLength(All(US_Subfields in 13.004)) GTE 1B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1O13.997-Subfield CharType NBytes(All(US_Subfields:1,2 in 13.997)) MO [0x30 to 0x39]B*
O13.998-Subfield CharType ANSU<要件 ID: “Field: Geographic”> を参照してください。t-2
Field: Type13-CharCountTable 66<表 66 は、サブフィールドを含まない各フィールドの文字数を規定しています。>1M13.001-CharCountDataLength(13.001) GTE 1B
1M13.002-CharCountDataLength(13.002) EQ 1 OR 2B
1M13.003-CharCountDataLength(13.003) EQ 1 OR 2B
1M13.005-CharCountDataLength(13.005) EQ 8B
1M13.006-CharCountDataLength(13.006) MO [2 to 5]B
1M13.007-CharCountDataLength(13.007) MO [2 to 5]B
1M13.008-CharCountDataLength(13.008) EQ 1B
1M13.009-CharCountDataLength(13.009) MO [1 to 5]B
1M13.010-CharCountDataLength(13.010) MO [1 to 5]B
1M13.011-CharCountDataLength(13.011) MO [3 to 5]B
1M13.012-CharCountDataLength(13.012) EQ 1 OR 2B
1O13.016-CharCountDataLength(13.016) MO [1 to 4]B
1O13.017-CharCountDataLength(13.017) MO [1 to 4]B
1O13.020-CharCountDataLength(13.020) MO [1 to 126]B
1O13.903-CharCountDataLength(13.903) MO [13 to 16]B
1O13.996-CharCountDataLength(13.995) EQ 64B
1M13.999-CharCountDataLength(13.999) GTE 1B
Field: Type13-Table 66<表 66 は、各サブフィールドの文字数を規定しています。>2M13.004-SubfieldLength(All(US_Subfields in 13.004)) GTE 1B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Subfield CharCountCharCount
2M13.013-Subfield CharCountLength(All(US_Subfields in 13.013)) EQ 1 OR 2B*
1D13.014-Subfield CharCountForEach(RS_Subfield in 13.014)
{
Length(US_Subfield:1 in RS_Subfield) EQ 1 OR 2
AND
Length(US_Subfield:2 in RS_Subfield) EQ 3
}
B*
1D13.015-Subfield CharCountForEach(RS_Subfield in 13.015)
{
Length(US_Subfields:1,2 in RS_Subfield)) EQ 2 OR 3
AND
Length(US_Subfields:3 to 6 in RS_Subfield)) MO [1 to 5]
}
B*
1O13.024-Subfield CharCountForEach(RS_Subfield in 13.024)
{
Length(US_Subfield:1 in RS_Subfield)) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield)) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield)) EQ 4
AND
Length(US_Subfields:4 in RS_Subfield)) MO [1 to 5]
}
B*
1O13.902-Subfield CharCountForEach(RS_Subfield in 13.902)
{
Length(US_Subfield:1 in RS_Subfield) EQ 15
AND
Length(US_Subfields:2,3 in RS_Subfield) MO [1 to 64]
AND
Length(US_Subfield:4 in RS_Subfield)) MO [1 to 255]
}
B*
1O13.904-Subfield CharCountLength(All(US_Subfields in 13.904)) MO [1 to 50]B*
1O13.995-ForEach(RS_Subfield in 13.995)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Subfield CharCountCharCount
2M13.013-Subfield CharCountLength(All(US_Subfields in 13.013)) EQ 1 OR 2B*
1D13.014-Subfield CharCountForEach(RS_Subfield in 13.014)
{
Length(US_Subfield:1 in RS_Subfield) EQ 1 OR 2
AND
Length(US_Subfield:2 in RS_Subfield) EQ 3
}
B*
1D13.015-Subfield CharCountForEach(RS_Subfield in 13.015)
{
Length(US_Subfields:1,2 in RS_Subfield)) EQ 2 OR 3
AND
Length(US_Subfields:3 to 6 in RS_Subfield)) MO [1 to 5]
}
B*
1O13.024-Subfield CharCountForEach(RS_Subfield in 13.024)
{
Length(US_Subfield:1 in RS_Subfield)) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield)) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield)) EQ 4
AND
Length(US_Subfields:4 in RS_Subfield)) MO [1 to 5]
}
B*
1O13.902-Subfield CharCountForEach(RS_Subfield in 13.902)
{
Length(US_Subfield:1 in RS_Subfield) EQ 15
AND
Length(US_Subfields:2,3 in RS_Subfield) MO [1 to 64]
AND
Length(US_Subfield:4 in RS_Subfield)) MO [1 to 255]
}
B*
1O13.904-Subfield CharCountLength(All(US_Subfields in 13.904)) MO [1 to 50]B*
1O13.995-ForEach(RS_Subfield in 13.995)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Subfield CharCount{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
1O13.997-Subfield CharCountForEach(RS_Subfield in 13.997)
{
Length(US_Subfield:2 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
O13.998-Subfield CharCount<See Requirement ID: “Field: Geographic”>t-2
Field: Type13-Field OccurrenceTable 66<Table 66 specifies the Field Occurrence for each field.>1-Type13-Occurrence ZeroCount(13.[016, 017, 021 to 023, 025 to 199,901,905 to 994]) EQ 0B
1MType13-Occurrence OneCount(13.[001 to 013, 999]) EQ 1B
1-Type13-Occurrence One or FewerCount(13.[ 014 to 017,020, ,024, 902 to 904, 995 to 998) LTE 1B
Field: 13.001-Record Header Value8.13.1, Table 66, 7.1Field 13.001 Record header. In Traditional encoding, this field contains the record length in bytes (including all information separators)M13.001-Record Header<See Requirement ID “Field: xx.001-Record Header”>t-2
8.13.1, C.10.11The XML name for the Type-13 record is <itl:PackageLatentImageRecord>, and its <biom:RecordCategoryCode> element shall have a value of “13”.1MNIEM-13.001-Record HeaderForEach(itl:PackageLatentImageRecord)
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(13)
}
X
Field: 13.002-Information Designation Character Value8.13.2, Table 66, 7.3.1This mandatory field shall be the IDC of this Type-13 record as found in the information item IDC of Field 1.003 Transaction content/CNT.M13.002-IDC<See Requirement IDs “Field:
xx.002-IDC and “Field: 1.003-Transaction Content Subfield 2 IDC Matches” >
t-2
Field: 13.003-Impression Type Value8.13.3, Table 66, 7.7.4.1This mandatory field shall indicate the manner by which the latent print was obtained.
See Section 7.7.4.1 for details. Valid values are 4 through 7, 12 through 15 and 32 through 39.
1M13.003-IMP{13.003} MO [4 to 7, 12 to 15, 32 to 39]B
Field: 13.004-8.13.4, 7.6This is a mandatory field. See Section 7.6 for details.M13.004-ORG<See Requirement ID “Field: Agency Codes” >t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Subfield CharCount{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
1O13.997-Subfield CharCountForEach(RS_Subfield in 13.997)
{
Length(US_Subfield:2 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
O13.998-Subfield CharCount<要件 ID: “Field: Geographic” を参照してください。>t-2
Field: Type13-Field OccurrenceTable 66<表 66 は、各フィールドの出現回数を規定しています。>1-Type13-Occurrence ZeroCount(13.[016, 017, 021 to 023, 025 to 199,901,905 to 994]) EQ 0B
1MType13-Occurrence OneCount(13.[001 to 013, 999]) EQ 1B
1-Type13-Occurrence One or FewerCount(13.[ 014 to 017,020, ,024, 902 to 904, 995 to 998) LTE 1B
Field: 13.001-Record Header Value8.13.1, Table 66, 7.1フィールド 13.001 はレコードヘッダーです。Traditional エンコーディングでは、このフィールドは、すべての情報セパレーターを含むレコード長をバイト単位で保持します。M13.001-Record Header<要件 ID “Field: xx.001-Record Header” を参照してください。>t-2
8.13.1, C.10.11Type-13 レコードの XML 名は <itl:PackageLatentImageRecord> で、その <biom:RecordCategoryCode> 要素の値は「13」でなければなりません。1MNIEM-13.001-Record HeaderForEach(itl:PackageLatentImageRecord)
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(13)
}
X
Field: 13.002-Information Designation Character Value8.13.2, Table 66, 7.3.1この必須フィールドは、Field 1.003 Transaction content/CNT の情報項目 IDC にある、この Type-13 レコードの IDC でなければなりません。M13.002-IDC<要件 ID “Field:
xx.002-IDC および “Field: 1.003-Transaction Content Subfield 2 IDC Matches” を参照してください。>
t-2
Field: 13.003-Impression Type Value8.13.3, Table 66, 7.7.4.1この必須フィールドは、遺留指紋が採取された方法を示さなければなりません。
詳細は 7.7.4.1 節を参照してください。有効な値は 4〜7、12〜15、および 32〜39 です。
1M13.003-IMP{13.003} MO [4 to 7, 12 to 15, 32 to 39]B
Field: 13.004-8.13.4, 7.6これは必須のフィールドです。詳細は 7.6 節を参照してください。M13.004-ORG<要件 ID: “Field: Agency Codes” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Originating Agency Value
Field: 13.005-Latent Capture Date Value8.13.5, 7.7.2.3This mandatory field shall contain the date that the latent biometric data contained in the record was captured.1M13.005-LCD{13.005} MO [ValidLocalDate]t-6T
1MNIEM-13.005-LCDForEach(XElm(itl:PackageLatentImageRecord))
{
{XElm(nc:Date) in XElm(biom:CaptureDate)} MO [NIEM-ValidLocalDate]
}
t-6X
Field: 13.006-Horizontal Line Length Value8.13.6, Table 66, 7.7.8.1The maximum horizontal size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types. The minimum value is 10 pixels.M13.006-HLL<See Requirement ID “Field: Image HLL Value” >t-2
Field: 13.006-Horizontal Line Length Metadata8.13.6, Table 66, 7.7.8.1<The HLL is verified by checking the image metadata if compression is used.>2M13.006-HLL Metadata JPEGLIF {13.011} EQ ASCII(JPEGL) THEN
{13.006} EQ {ImageWidth-JPEGB,JPEGL}
t-11B
2M13.006-HLL Metadata JP2LIF {13.011} EQ ASCII(JP2L) THEN
{13.006} EQ {ImageWidth-JP2,JP2L}
t-11B
2M13.006-HLL Metadata PNGIF {13.011} EQ ASCII(PNG) THEN
{13.006} EQ {ImageWidth-PNG}
t-11B
2M13.006-HLL Metadata WSQIF {13.011} EQ ASCII(WSQ20) THEN
{13.006} EQ {ImageWidth-WSQ}
t-11B
Field: 13.007-Vertical Line Length Value8.13.7, Table 66, 7.7.8.2The maximum vertical size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types.
The minimum value is 10 pixels.
M13.007-VLL<See Requirement ID “Field: Image VLL Value” >t-2
Field: 13.007-Vertical Line Length Metadata8.13.7, Table 66, 7.7.8.2<The VLL is verified by checking the image metadata if compression is used.>2M13.007-VLL Metadata JPEGLIF {13.011} EQ ASCII (JPEGL) THEN
{13.007} EQ {ImageHeight-JPEGB,JPEGL}
t-11B
2M13.007-VLL Metadata JP2LIF {13.011} EQ ASCII(JP2L) THEN
{13.007} EQ {ImageHeight-JP2,JP2L}
t-11B
2M13.007-VLL Metadata PNGIF {13.011} EQ ASCII(PNG) THEN
{13.007} EQ {ImageHeight-PNG}
t-11B
2M13.007-VLL Metadata WSQIF {13.011} EQ ASCII(WSQ20) THEN
{13.007} EQ {ImageHeight-WSQ}
t-11B
Field: 13.008-Scale8.13.8, Table 66,<Table 66 lists the value constraints for SLC>M13.008-SLC<See Requirement ID “Field: Image SLC Value” >t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Originating Agency Value
Field: 13.005-Latent Capture Date Value8.13.5, 7.7.2.3この必須フィールドは、レコードに含まれる遺留生体データが採取された日付を保持しなければなりません。1M13.005-LCD{13.005} MO [ValidLocalDate]t-6T
1MNIEM-13.005-LCDForEach(XElm(itl:PackageLatentImageRecord))
{
{XElm(nc:Date) in XElm(biom:CaptureDate)} MO [NIEM-ValidLocalDate]
}
t-6X
Field: 13.006-Horizontal Line Length Value8.13.6, Table 66, 7.7.8.1水平方向の最大サイズは、Record Types-4 および 8 では 65,534 画素、その他のレコードタイプでは 99,999 に制限されます。最小値は 10 画素です。M13.006-HLL<要件 ID: “Field: Image HLL Value” を参照してください。>t-2
Field: 13.006-Horizontal Line Length Metadata8.13.6, Table 66, 7.7.8.1<HLL は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>2M13.006-HLL Metadata JPEGLIF {13.011} EQ ASCII(JPEGL) THEN
{13.006} EQ {ImageWidth-JPEGB,JPEGL}
t-11B
2M13.006-HLL Metadata JP2LIF {13.011} EQ ASCII(JP2L) THEN
{13.006} EQ {ImageWidth-JP2,JP2L}
t-11B
2M13.006-HLL Metadata PNGIF {13.011} EQ ASCII(PNG) THEN
{13.006} EQ {ImageWidth-PNG}
t-11B
2M13.006-HLL Metadata WSQIF {13.011} EQ ASCII(WSQ20) THEN
{13.006} EQ {ImageWidth-WSQ}
t-11B
Field: 13.007-Vertical Line Length Value8.13.7, Table 66, 7.7.8.2垂直方向の最大サイズは、Record Types-4 および 8 では 65,534 画素、その他のレコードタイプでは 99,999 に制限されます。
最小値は 10 画素です。
M13.007-VLL<要件 ID: “Field: Image VLL Value” を参照してください。>t-2
Field: 13.007-Vertical Line Length Metadata8.13.7, Table 66, 7.7.8.2<VLL は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>2M13.007-VLL Metadata JPEGLIF {13.011} EQ ASCII (JPEGL) THEN
{13.007} EQ {ImageHeight-JPEGB,JPEGL}
t-11B
2M13.007-VLL Metadata JP2LIF {13.011} EQ ASCII(JP2L) THEN
{13.007} EQ {ImageHeight-JP2,JP2L}
t-11B
2M13.007-VLL Metadata PNGIF {13.011} EQ ASCII(PNG) THEN
{13.007} EQ {ImageHeight-PNG}
t-11B
2M13.007-VLL Metadata WSQIF {13.011} EQ ASCII(WSQ20) THEN
{13.007} EQ {ImageHeight-WSQ}
t-11B
Field: 13.008-Scale8.13.8, Table 66,<表 66 は SLC の値の制約を列挙しています。>M13.008-SLC<要件 ID: “Field: Image SLC Value” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Units Value7.7.8.3
Field: 13.008-Scale Units Metadata8.13.8, Table 66, 7.7.8.3A value of “1” shall indicate pixels per inch.
A value of “2” shall indicate pixels per centimeter. A value of “0” in this field indicates that no scale is provided, and the quotient of THPS/TVPS shall provide the pixel aspect ratio.
<The SLC is verified by checking the image metadata if compression is used.>
2M13.008-SLC Metadata JPEGLIF {13.011} EQ ASCII(JPEGL) THEN
{13.008} EQ {SamplingUnits-JPEGB,JPEGL}
t-11B
2M13.008-SLC Metadata JP2L<Not Tested.>t-12B
2M13.008-SLC Metadata PNGIF {13.011} EQ ASCII(PNG) THEN
IF {13.008} EQ 1 OR 2 THEN { SamplingUnits-PNG} EQ 1, ELSE IF {13.008} EQ 0 THEN { SamplingUnits-PNG} EQ 0
t-11B
M13.008-SLC Metadata WSQ<Not Tested.>t-12B
Field: 13.009-Transmitted Horizontal Pixel Scale Value8.13.9, Table 66, 7.7.8.4<Table 66 lists the value constraints for THPS.>M13.009-THPS<See Requirement ID “Field: Image THPS Value” >t-2
Field: 13.009-Transmitted Horizontal Pixel Scale Metadata8.13.9, Table 66, 7.7.8.4This is the integer pixel density used in the horizontal direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the horizontal component of the pixel aspect ratio, up to 5 digits.
<The THPS is verified by checking the image metadata if compression is used.>
2M13.009-THPS Metadata JPEGLIF {13.011} EQ ASCII(JPEGL) AND {13.008} EQ 1 OR 2
THEN {13.009} EQ {HorizontalDensity-JPEGB,JPEGL}
t-11B
M13.009-THPS Metadata JP2L<Not Tested.>t-12B
2M13.009-THPS Metadata PNGIF {13.011} EQ ASCII(PNG) AND {13.008} EQ 1 THEN {13.009} EQ {HorizontalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {13.011} EQ ASCII(PNG) AND {13.008} EQ 2
THEN {13.009} EQ {HorizontalDensity-PNG} * 0.01 (meters/cm)
t-11B
M13.009-THPS Metadata WSQ<Not Tested.>t-12B
2M13.009-THPS Aspect Ratio Metadata JPEGLIF {13.011} EQ ASCII(JPEGL) AND {13.008} NEQ 1 OR 2
THEN {13.009}/{13.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Units Value7.7.8.3
Field: 13.008-Scale Units Metadata8.13.8, Table 66, 7.7.8.3値「1」は、インチあたりの画素数を示さなければなりません。
値「2」は、センチメートルあたりの画素数を示さなければなりません。このフィールドの値「0」は、縮尺が与えられていないことを示し、THPS/TVPS の商が画素アスペクト比を与えなければなりません。
<SLC は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
2M13.008-SLC Metadata JPEGLIF {13.011} EQ ASCII(JPEGL) THEN
{13.008} EQ {SamplingUnits-JPEGB,JPEGL}
t-11B
2M13.008-SLC Metadata JP2L<試験しません。>t-12B
2M13.008-SLC Metadata PNGIF {13.011} EQ ASCII(PNG) THEN
IF {13.008} EQ 1 OR 2 THEN { SamplingUnits-PNG} EQ 1, ELSE IF {13.008} EQ 0 THEN { SamplingUnits-PNG} EQ 0
t-11B
M13.008-SLC Metadata WSQ<試験しません。>t-12B
Field: 13.009-Transmitted Horizontal Pixel Scale Value8.13.9, Table 66, 7.7.8.4<表 66 は THPS の値の制約を列挙しています。>M13.009-THPS<要件 ID: “Field: Image THPS Value” を参照してください。>t-2
Field: 13.009-Transmitted Horizontal Pixel Scale Metadata8.13.9, Table 66, 7.7.8.4これは、SLC の値が「1」または「2」の場合に画像の水平方向で使用される整数の画素密度です。SLC の値が「0」の場合、この情報項目は、画素アスペクト比の水平成分を最大 5 桁で保持しなければなりません。
<THPS は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
2M13.009-THPS Metadata JPEGLIF {13.011} EQ ASCII(JPEGL) AND {13.008} EQ 1 OR 2
THEN {13.009} EQ {HorizontalDensity-JPEGB,JPEGL}
t-11B
M13.009-THPS Metadata JP2L<試験しません。>t-12B
2M13.009-THPS Metadata PNGIF {13.011} EQ ASCII(PNG) AND {13.008} EQ 1 THEN {13.009} EQ {HorizontalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {13.011} EQ ASCII(PNG) AND {13.008} EQ 2
THEN {13.009} EQ {HorizontalDensity-PNG} * 0.01 (meters/cm)
t-11B
M13.009-THPS Metadata WSQ<試験しません。>t-12B
2M13.009-THPS Aspect Ratio Metadata JPEGLIF {13.011} EQ ASCII(JPEGL) AND {13.008} NEQ 1 OR 2
THEN {13.009}/{13.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
M13.009-THPS Aspect Ratio Metadata JP2L<Not Tested.>t-12B
2M13.009-THPS Aspect Ratio Metadata PNGIF {13.011} EQ ASCII(PNG) AND {13.008} NEQ 1 OR 2
THEN {13.009}/{13.010} EQ {HorizontalDensity-PNG} / {VerticalDensity-PNG}
t-11B
M13.009-THPS Aspect Ratio Metadata WSQ<Not Tested.>t-12B
Field: 13.010-Transmitted Vertical Pixel Scale Value8.13.10, Table 66, 7.7.8.5<Table 66 lists the value constraints for TVPS.>M13.010-TVPS<See Requirement ID “Field: Image TVPS Value” >t-2
Field: 13.010-Transmitted Vertical Pixel Scale Metadata8.13.10, Table 66, 7.7.8.5This is the integer pixel density used in the Vertical direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the Vertical component of the pixel aspect ratio, up to 5 digits.
<The TVPS is verified by checking the image metadata if compression is used.>
2M13.010-TVPS Metadata JPEGLIF {13.011} EQ ASCII(JPEGL) AND {13.008} EQ 1 OR 2
THEN {13.010} EQ {VerticalDensity-JPEGB,JPEGL}
t-11B
M13.010-TVPS Metadata JP2L<Not Tested.>t-12B
2M13.010-TVPS Metadata PNGIF {13.011} EQ ASCII(PNG) AND {13.008} EQ 1 THEN {13.010} EQ {VerticalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {13.011} EQ ASCII(PNG) AND {13.008} EQ 2
THEN {13.010} EQ {VerticalDensity-PNG} * 0.01 (meters/cm)
t-11B
M13.010-TVPS Metadata WSQ<Not Tested.>t-12B
2M13.010-TVPSIF {13.011} EQ ASCII(JPEGL) AND {13.008} NEQ 1 OR 2t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
M13.009-THPS Aspect Ratio Metadata JP2L<試験しません。>t-12B
2M13.009-THPS Aspect Ratio Metadata PNGIF {13.011} EQ ASCII(PNG) AND {13.008} NEQ 1 OR 2
THEN {13.009}/{13.010} EQ {HorizontalDensity-PNG} / {VerticalDensity-PNG}
t-11B
M13.009-THPS Aspect Ratio Metadata WSQ<試験しません。>t-12B
Field: 13.010-Transmitted Vertical Pixel Scale Value8.13.10, Table 66, 7.7.8.5<表 66 は TVPS の値の制約を列挙しています。>M13.010-TVPS<要件 ID: “Field: Image TVPS Value” を参照してください。>t-2
Field: 13.010-Transmitted Vertical Pixel Scale Metadata8.13.10, Table 66, 7.7.8.5これは、SLC の値が「1」または「2」の場合に画像の垂直方向で使用される整数の画素密度です。SLC の値が「0」の場合、この情報項目は、画素アスペクト比の垂直成分を最大 5 桁で保持しなければなりません。
<TVPS は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
2M13.010-TVPS Metadata JPEGLIF {13.011} EQ ASCII(JPEGL) AND {13.008} EQ 1 OR 2
THEN {13.010} EQ {VerticalDensity-JPEGB,JPEGL}
t-11B
M13.010-TVPS Metadata JP2L<試験しません。>t-12B
2M13.010-TVPS Metadata PNGIF {13.011} EQ ASCII(PNG) AND {13.008} EQ 1 THEN {13.010} EQ {VerticalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {13.011} EQ ASCII(PNG) AND {13.008} EQ 2
THEN {13.010} EQ {VerticalDensity-PNG} * 0.01 (meters/cm)
t-11B
M13.010-TVPS Metadata WSQ<試験しません。>t-12B
2M13.010-TVPSIF {13.011} EQ ASCII(JPEGL) AND {13.008} NEQ 1 OR 2t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Aspect Ratio Metadata JPEGLTHEN {13.009}/{13.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
M13.010-TVPS Aspect Ratio Metadata JP2L<Not Tested.>t-12B
2M13.010-TVPS Aspect Ratio Metadata PNGIF {13.011} EQ ASCII(PNG) AND {13.008} NEQ 1 OR 2
THEN {13.009}/{13.010} EQ { HorizontalDensity - PNG} / {VerticalDensity-PNG}
t-11B
M13.010-TVPS Aspect Ratio Metadata WSQ<Not Tested.>t-12B
Field: 13.011-Compression Algorithm Value8.13.11, Table 66, 7.7.9.1, 5.3.13For each of these fields, the entry corresponds to the appropriate Label entry in Table 12: Field 13.011: Compression algorithm / CGA.
The variable-resolution for latent image data contained in the Type-13 record shall be uncompressed or may be the output from a lossless compression algorithm.
1M13.011-CGA{13.011} MO [ASCII(NONE, JPEGL, JP2L, PNG, WSQ)]t-98B
Field: 13.011-Compression Algorithm Metadata8.13.11, Table 66<The CGA is verified by checking the image metadata for the compression type signature if compression is used.>2M13.011-CGAMetadata JPEGLIF {13.011} EQ ASCII(JPEGL) THEN
Present(SOI -JPEG,JPEGL)
t-11B
2M13.011-CGA Metadata JP2LIF {13.011} EQ ASCII(JP2L) THEN
Present(SigBox)
t-11B
2M13.011-CGA Metadata PNGIF {13.011} EQ ASCII(PNG) THEN
Present(PNGSig)
t-11B
2M13.011-CGA Metadata WSQIF {13.011} EQ ASCII(WSQ20) THEN Present(SOI-WSQ)t-11B
Field: 13.012-Bits Per Pixel8.13.12, Table 66, 7.7.8.6This field shall contain an entry of “8” for normal grayscale values of “0” to “255”. Any entry in this field greater than “8”M13.012-BPX<See Requirement ID “Field: Image BPX Value” >t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Aspect Ratio Metadata JPEGLTHEN {13.009}/{13.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
M13.010-TVPS Aspect Ratio Metadata JP2L<試験しません。>t-12B
2M13.010-TVPS Aspect Ratio Metadata PNGIF {13.011} EQ ASCII(PNG) AND {13.008} NEQ 1 OR 2
THEN {13.009}/{13.010} EQ { HorizontalDensity - PNG} / {VerticalDensity-PNG}
t-11B
M13.010-TVPS Aspect Ratio Metadata WSQ<試験しません。>t-12B
Field: 13.011-Compression Algorithm Value8.13.11, Table 66, 7.7.9.1, 5.3.13これらの各フィールドでは、エントリーは表 12: Field 13.011: Compression algorithm / CGA の該当する Label エントリーに対応します。
Type-13 レコードに含まれる可変解像度の遺留画像データは、非圧縮でなければなりません。または、可逆圧縮アルゴリズムの出力であってもよいです。
1M13.011-CGA{13.011} MO [ASCII(NONE, JPEGL, JP2L, PNG, WSQ)]t-98B
Field: 13.011-Compression Algorithm Metadata8.13.11, Table 66<CGA は、圧縮が使用されている場合、画像メタデータの圧縮タイプのシグネチャを確認することで検証されます。>2M13.011-CGAMetadata JPEGLIF {13.011} EQ ASCII(JPEGL) THEN
Present(SOI -JPEG,JPEGL)
t-11B
2M13.011-CGA Metadata JP2LIF {13.011} EQ ASCII(JP2L) THEN
Present(SigBox)
t-11B
2M13.011-CGA Metadata PNGIF {13.011} EQ ASCII(PNG) THEN
Present(PNGSig)
t-11B
2M13.011-CGA Metadata WSQIF {13.011} EQ ASCII(WSQ20) THEN Present(SOI-WSQ)t-11B
Field: 13.012-Bits Per Pixel8.13.12, Table 66, 7.7.8.6このフィールドには、グレースケール値「0」〜「255」の通常の場合は「8」を入力しなければなりません。このフィールドで「8」より大きい値は、M13.012-BPX<要件 ID: “Field: Image BPX Value” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Valueshall represent a grayscale pixel with increased proportion.
Field: 13.012- Bits Per Pixel Metadata8.13.12, Table 66<The BPX is verified by checking the image metadata for the compression type signature if compression is used.>2M13.012-BPX Metadata JPEGL{13.012} EQ {BPX-JPEG, JPEGL}t-11B
2M13.012-BPX Metadata JP2L{13.012} EQ {BPX-JP2,JP2L}t-11B
2M13.012-BPX Metadata PNG{13.012} EQ {BPX-PNG}t-11B
M13.012-BPX Metadata WSQ<Not Tested.>t-12B
Field: 13.013-Friction Ridge Generalized Position Value8.13.13, Table 66, 7.7.4.2, Table 6See Section 7.7.4.2 and Table 6 for details.1M13.013-FGP Value{13.013} MO [0 to 38, 40 to 50, 60 to 79, 81 to 84]B
Field: 13.013-Friction Ridge Generalized Position Conditional8.13.13, Table 66If code 19 is used, fields 13.014 and 13.015 shall be used.M13.013-FGP Conditional<See Requirement ID: “Field: SPD,PPC Conditional”>t-2
Field: 13.014-Search Position Descriptors Value8.13.14, Table 66, 7.7.4.3…described in Section 7.7.4.3D13.014-SPD Value<See Requirement ID: “Field: SPD,PPD Values”>t-2
Field: 13.014-Search Position Descriptors Conditional8.13.14, Table 66This field shall be present if and only if the finger position code “19” appears in Field 13.013: Friction ridge generalized position / FGP.D13.014-SPD Conditional<See Requirement ID: “Field: SPD,PPC Conditional”>t-2
Field: 13.015-Print Position Coordinates Value8.13.15, Table 66, 7.7.4.4See section 7.7.4.4D13.015-PPC Value<See Requirement IDs: “Field: PPC-Subfield 1” through “Field: PPC-Subfields 5,6”.>t-2
Field:8.13.15,This field may be present if and only if theD13.015-PPC<See Requirement ID: “Field: SPD,PPCt-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Value画素の比率が高められたグレースケール画素を表さなければなりません。
Field: 13.012- Bits Per Pixel Metadata8.13.12, Table 66<BPX は、圧縮が使用されている場合、画像メタデータの圧縮タイプのシグネチャを確認することで検証されます。>2M13.012-BPX Metadata JPEGL{13.012} EQ {BPX-JPEG, JPEGL}t-11B
2M13.012-BPX Metadata JP2L{13.012} EQ {BPX-JP2,JP2L}t-11B
2M13.012-BPX Metadata PNG{13.012} EQ {BPX-PNG}t-11B
M13.012-BPX Metadata WSQ<試験しません。>t-12B
Field: 13.013-Friction Ridge Generalized Position Value8.13.13, Table 66, 7.7.4.2, Table 6詳細は 7.7.4.2 節および表 6を参照してください。1M13.013-FGP Value{13.013} MO [0 to 38, 40 to 50, 60 to 79, 81 to 84]B
Field: 13.013-Friction Ridge Generalized Position Conditional8.13.13, Table 66コード 19 を使用する場合は、フィールド 13.014 および 13.015 を使用しなければなりません。M13.013-FGP Conditional<要件 ID: “Field: SPD,PPC Conditional” を参照してください。>t-2
Field: 13.014-Search Position Descriptors Value8.13.14, Table 66, 7.7.4.3…7.7.4.3 節に記載D13.014-SPD Value<要件 ID: “Field: SPD,PPD Values” を参照してください。>t-2
Field: 13.014-Search Position Descriptors Conditional8.13.14, Table 66このフィールドは、指位置コード「19」が Field 13.013: Friction ridge generalized position / FGP に現れる場合に限り、存在しなければなりません。D13.014-SPD Conditional<要件 ID: “Field: SPD,PPC Conditional” を参照してください。>t-2
Field: 13.015-Print Position Coordinates Value8.13.15, Table 66, 7.7.4.47.7.4.4 節を参照D13.015-PPC Value<要件 ID: “Field: PPC-Subfield 1” から “Field: PPC-Subfields 5,6” を参照してください。>t-2
Field:8.13.15,このフィールドは、次の場合に限り、存在してもよいです。D13.015-PPC<要件 ID: “Field: SPD,PPCt-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
13.015- Print Position Coordinates ConditionalTable 66finger position code “19” appears in Field 13.013: Friction ridge generalized position / FGP.ConditionalConditional”>
Field: 13.016-Scanned Horizontal Pixel Scale Value8.13.16, Table 66, 7.7.8.7See section 7.7.8 for details.O13.016-SHPS Value<See Requirement IDs: “Field: Image SHPS Value”>t-2
Field: 13.017-Scanned Vertical Pixel Scale Value8.13.17, Table 66, 7.7.8.8See section 7.7.8 for details.O13.016-SVPS Value<See Requirement IDs: “Field: Image SVPS Value”>t-2
Field: 13.018, 13.019-ReservedTable 66Reserved for future useonly by ANSI/NIST-ITL.-13.018, 13.019-Reserved<See Requirement ID: “Field: Type13-CondCode>.t-2
Field: 13.020-Comment Value8.13.17, Table 66, 7.4.4See section 7.4.4 for details.O13.020-COM Value<See Requirement ID: “Field: Comment>.t-2
Field: 13.021, 13.023-ReservedTable 66Reserved for future useonly by ANSI/NIST-ITL.-13.021, 13.023-Reserved<See Requirement ID: “Field: Type13-CondCode>.t-2
Field: 13.024-Latent Quality Metric ValueTable 66, Table 6, 8.13.19The first information item shall be the friction ridge code/ FRC. See Section 7.7.7 for a description of the remaining three information items.O13.024-LQM Value<See Requirement IDs: “Field: Sample Quality Subfield 1”, “Field: Sample Quality Subfield 2”, “Field: Sample Quality Subfield 3”, “Field: Sample Quality Additional Subfield”>.t-2
Field: 13.025, 13.199-ReservedTable 66Reserved for future useonly by ANSI/NIST-ITL.-13.025, 13.199-Reserved<See Requirement ID: “Field: Type13-CondCode>.t-2
Field: 13.200 to 13.900-User DefinedTable 66User Defined Fields-13.200 to 13.900-User DefinedTRUEB
Field: 13.901-ReservedTable 66Reserved for future useonly by ANSI/NIST-ITL.-13.901-Reserved<See Requirement ID: “Field: Type13-CondCode>.t-2
Field:8.13.21,This is an optional field, listing theO13.902-<See Requirement ID: “Field: xx.902-ANN” >.t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
13.015- Print Position Coordinates ConditionalTable 66指位置コード「19」が Field 13.013: Friction ridge generalized position / FGP に現れる場合。ConditionalConditional” を参照してください。>
Field: 13.016-Scanned Horizontal Pixel Scale Value8.13.16, Table 66, 7.7.8.7詳細は 7.7.8 節を参照してください。O13.016-SHPS Value<要件 ID: “Field: Image SHPS Value” を参照してください。>t-2
Field: 13.017-Scanned Vertical Pixel Scale Value8.13.17, Table 66, 7.7.8.8詳細は 7.7.8 節を参照してください。O13.016-SVPS Value<要件 ID: “Field: Image SVPS Value” を参照してください。>t-2
Field: 13.018, 13.019-ReservedTable 66ANSI/NIST-ITL のみが将来使用するために予約されています。-13.018, 13.019-Reserved<要件 ID: “Field: Type13-CondCode” を参照してください。>t-2
Field: 13.020-Comment Value8.13.17, Table 66, 7.4.4詳細は 7.4.4 節を参照してください。O13.020-COM Value<要件 ID: “Field: Comment” を参照してください。>t-2
Field: 13.021, 13.023-ReservedTable 66ANSI/NIST-ITL のみが将来使用するために予約されています。-13.021, 13.023-Reserved<要件 ID: “Field: Type13-CondCode” を参照してください。>t-2
Field: 13.024-Latent Quality Metric ValueTable 66, Table 6, 8.13.19最初の情報項目は、摩擦隆線コード / FRC でなければなりません。残りの 3 つの情報項目の説明は 7.7.7 節を参照してください。O13.024-LQM Value<要件 ID: “Field: Sample Quality Subfield 1”, “Field: Sample Quality Subfield 2”, “Field: Sample Quality Subfield 3”, “Field: Sample Quality Additional Subfield” を参照してください。>t-2
Field: 13.025, 13.199-ReservedTable 66ANSI/NIST-ITL のみが将来使用するために予約されています。-13.025, 13.199-Reserved<要件 ID: “Field: Type13-CondCode” を参照してください。>t-2
Field: 13.200 to 13.900-User DefinedTable 66ユーザー定義フィールド-13.200 to 13.900-User DefinedTRUEB
Field: 13.901-ReservedTable 66ANSI/NIST-ITL のみが将来使用するために予約されています。-13.901-Reserved<要件 ID: “Field: Type13-CondCode” を参照してください。>t-2
Field:8.13.21,これは任意のフィールドで、O13.902-<要件 ID: “Field: xx.902-ANN” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
13.902-Annotated Information ValueTable 66operations performed on the original source in order to prepare it for inclusion in a biometric record type. See Section 7.4.1.ANN-Value
Field: 13.903-Device Unique Identifier Value8.13.22, Table 66This is an optional field. See Section 7.7.1.1.O13.903-DUI Value<See Requirement ID: “Field: Device ID” >.t-2
Field: 13.904-Make/Model/Serial Number Value8.13.23, Table 66This is an optional field. See Section 7.7.1.2.O13.904-MMS Value<See Requirement ID: “Field: Make Model” >.t-2
Field: 13.905, 13.994-ReservedTable 66Reserved for future useonly by ANSI/NIST-ITL.-13.905, 13.994-Reserved<See Requirement ID: “Field: Type13-CondCode>.t-2
Field: 13.995-Associated Context Value8.13.24, Table 66See Section 7.3.3O13.995-ASC Value<See Requirement IDs: “Field: xx.995-ASC” and “Field: xx.995-ASC-ACN” and
“Field: xx.995-ASC-ASP”>.
t-2
Field: 13.996-Hash Value8.13.25, Table 66See Section 7.5.2O13.996-HAS Value<See Requirement ID: “Field: HAS”>t-2
Field: 13.997-Source Representation Value8.13.26, Table 66See Section 7.3.2O13.997-SOR Value<See Requirement IDs: “Field: xx.997-SOR” and “Field: xx.997-SOR-SRN” and
“Field: xx.997-SOR-RSP”>.
t-2
Field: 13.998-Geographic Sample Acquisition Location Value8.13.27, Table 66See Section 7.7.3O13.998-GEO Value<See Requirement IDs: “Field: Geographic”, “Field: Geographic-Conditional”, “Field: Geographic-Subfield 1” through “Field: Geographic-Values-SubField 15” >.t-2
Field: 13.999-Image Data Valid8.13.28, Table 66This is a mandatory field contains the image.
<The image metadata is checked for validity.>
2M13.999-DATA Uncompressed ValidIF {13.011} EQ ASCII(NONE) THEN
Length(13.999) EQ 13.006} * {13.007}
B
2M13.999-DATAIF {13.011} EQ ASCII(JPEGL) THEN
Present(JFIF,
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
13.902-Annotated Information ValueTable 66元の情報源に対して行った、生体情報レコードタイプに含めるための準備操作を列挙します。7.4.1 節を参照してください。ANN-Value
Field: 13.903-Device Unique Identifier Value8.13.22, Table 66これは任意のフィールドです。7.7.1.1 節を参照してください。O13.903-DUI Value<要件 ID: “Field: Device ID” を参照してください。>t-2
Field: 13.904-Make/Model/Serial Number Value8.13.23, Table 66これは任意のフィールドです。7.7.1.2 節を参照してください。O13.904-MMS Value<要件 ID: “Field: Make Model” を参照してください。>t-2
Field: 13.905, 13.994-ReservedTable 66ANSI/NIST-ITL のみによる将来の使用のために予約されています。-13.905, 13.994-Reserved<要件 ID: “Field: Type13-CondCode を参照してください。>t-2
Field: 13.995-Associated Context Value8.13.24, Table 667.3.3 節を参照してください。O13.995-ASC Value<要件 ID: “Field: xx.995-ASC” および “Field: xx.995-ASC-ACN” および
“Field: xx.995-ASC-ASP” を参照してください。>
t-2
Field: 13.996-Hash Value8.13.25, Table 667.5.2 節を参照してください。O13.996-HAS Value<要件 ID: “Field: HAS” を参照してください。>t-2
Field: 13.997-Source Representation Value8.13.26, Table 667.3.2 節を参照してください。O13.997-SOR Value<要件 ID: “Field: xx.997-SOR” および “Field: xx.997-SOR-SRN” および
“Field: xx.997-SOR-RSP” を参照してください。>
t-2
Field: 13.998-Geographic Sample Acquisition Location Value8.13.27, Table 667.7.3 節を参照してください。O13.998-GEO Value<要件 ID: “Field: Geographic”, “Field: Geographic-Conditional”, “Field: Geographic-Subfield 1” through “Field: Geographic-Values-SubField 15” を参照してください。>t-2
Field: 13.999-Image Data Valid8.13.28, Table 66これは必須のフィールドで、画像を含みます。
<画像メタデータが有効かどうかを確認します。>
2M13.999-DATA Uncompressed ValidIF {13.011} EQ ASCII(NONE) THEN
Length(13.999) EQ 13.006} * {13.007}
B
2M13.999-DATAIF {13.011} EQ ASCII(JPEGL) THEN
Present(JFIF,
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
JPEGL ValidSOI-JPEGB,JPEGL,
SOF-JPEGB,JPEGL,
EOI-JPEG, JPEGL)
2M13.999-DATA JP2L ValidIF {13.011} EQ ASCII(JP2L) THEN
Present(SigBox,
HeadBox,
ImgBox)
t-11B
2M13.999-DATA PNG ValidIF {13.011} EQ ASCII(PNG) THEN
Present(PNGSig,
IHDR,
IDAT,
IEND)
t-11B
2M13.999-DATA WSQ ValidIF {13.999} EQ ASCII(WSQ20) THEN Present(SOI-WSQ,SOF-WSQ,SOB-WSQ,EOI-WSQ)t-11B
Field: 13.999-Image WSQ Version 3.17.7.9.1Only version 3.1 or higher shall be used for compressing grayscale fingerprint data at 500 ppi class with a platen area of 2 inches or greater in height. WSQ shall not be used for other than the 500 ppi class.2M13.999-DATA WSQ VersionIF {13.011} EQ ASCII(WSQ20) THEN
{Encoder Version } EQ 2
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
JPEGL ValidSOI-JPEGB,JPEGL,
SOF-JPEGB,JPEGL,
EOI-JPEG, JPEGL)
2M13.999-DATA JP2L ValidIF {13.011} EQ ASCII(JP2L) THEN
Present(SigBox,
HeadBox,
ImgBox)
t-11B
2M13.999-DATA PNG ValidIF {13.011} EQ ASCII(PNG) THEN
Present(PNGSig,
IHDR,
IDAT,
IEND)
t-11B
2M13.999-DATA WSQ ValidIF {13.999} EQ ASCII(WSQ20) THEN Present(SOI-WSQ,SOF-WSQ,SOB-WSQ,EOI-WSQ)t-11B
Field: 13.999-Image WSQ Version 3.17.7.9.1高さ 2 インチ以上のプラテン領域を持つ 500 ppi クラスのグレースケール指紋データの圧縮には、バージョン 3.1 以上のみを使用しなければなりません。WSQ を 500 ppi クラス以外に使用してはなりません。2M13.999-DATA WSQ VersionIF {13.011} EQ ASCII(WSQ20) THEN
{Encoder Version } EQ 2
t-11B

Table C.13 - Assertions for Record Type 14 - Fingerprint Image Record

表 C.13 - Record Type 14(指紋画像レコード)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.14: Record Type-14: Fingerprint image record
Record: Type14-Fingerprint Type8.14The Type-14 record shall contain and be used to exchange exemplar fingerprint image data, such as a rolled tenprint, an identification flat, or a complete friction ridge exemplar. All fingerprint impressions shall be acquired from a card, a single or multiple-finger flat-capture device, contactless fingerprint sensor that outputs 2D fingerprint images, or a live-scan device. Captured images may be transmitted to agencies that will automatically extract the desired feature information from the images for matching purposes.3MType14-Fingerprint Type<Not Tested. It is not feasible to test if the image represents an exemplar fingerprint or how the image was acquired.>t-1B
Field: Type14-Subfield OccurrenceTable 67<Table 67 specifies which fields contain subfields as well as the number of occurrences permitted.>1-Type14-Subfields ZeroCount(Subfields in 14.[001 to 003, 005 to 012, 016, 017, 020, 026, 027, 030, 031, 903, 996, 999]) EQ 0T
1M14.004-SubfieldsCount(US_Subfields in 14.004) EQ 1 OR 2T
1M14.013-SubfieldsCount(US_Subfields in 14.013 ) EQ 1T
1D14.014-SubfieldsCount(US_Subfields in 14.014) EQ 2T
D14.015-Subfields<See Requirement ID: “Field: PPC-Subfield Occurrences”>t-2
1O14.018-SubfieldsCount(RS_Subfields in 14.018) MO [1 to 4]
AND
ForEach(RS_Subfield in 14.018)
{
Count(US_Subfields in RS_Subfield) EQ 2
}
T
1D14.021-Count(RS_Subfields in 14.021) MO [1 to 4]T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.14: Record Type-14: 指紋画像レコード
Record: Type14-Fingerprint Type8.14Type-14 レコードは、ロール式十指指紋、識別用の平面押捺、完全な摩擦隆線のエグゼンプラなどのエグゼンプラ指紋画像データを含み、その交換に使用されなければなりません。すべての指紋押捺は、カード、単指または複数指の平面採取装置、2D 指紋画像を出力する非接触指紋センサー、またはライブスキャン装置から取得されなければなりません。採取された画像は、照合の目的で画像から必要な特徴情報を自動的に抽出する機関に送信されてもよいです。3MType14-Fingerprint Type<試験しません。画像がエグゼンプラ指紋を表しているかどうか、または画像がどのように取得されたかを試験することは実現可能ではありません。>t-1B
Field: Type14-Subfield OccurrenceTable 67<表 67 は、どのフィールドがサブフィールドを含むか、および許容される出現回数を規定しています。>1-Type14-Subfields ZeroCount(Subfields in 14.[001 to 003, 005 to 012, 016, 017, 020, 026, 027, 030, 031, 903, 996, 999]) EQ 0T
1M14.004-SubfieldsCount(US_Subfields in 14.004) EQ 1 OR 2T
1M14.013-SubfieldsCount(US_Subfields in 14.013 ) EQ 1T
1D14.014-SubfieldsCount(US_Subfields in 14.014) EQ 2T
D14.015-Subfields<要件 ID: “Field: PPC-Subfield Occurrences”>t-2
1O14.018-SubfieldsCount(RS_Subfields in 14.018) MO [1 to 4]
AND
ForEach(RS_Subfield in 14.018)
{
Count(US_Subfields in RS_Subfield) EQ 2
}
T
1D14.021-Count(RS_Subfields in 14.021) MO [1 to 4]T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
SubfieldsAND
ForEach(RS_Subfield in 14.021)
{
Count(US_Subfields in RS_Subfield) EQ 5
}
1O14.022-SubfieldsCount(RS_Subfields in 14.022) MO [1 to 4]
AND
ForEach(RS_Subfield in 14.022)
{
Count(US_Subfields in RS_Subfield) EQ 2
}
T
1O14.023-SubfieldsCount(RS_Subfields in 14.023) MO [1 to 9]
AND
ForEach(RS_Subfield in 14.023)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O14.024-SubfieldsCount(RS_Subfields in 14.024) MO [1 to 9]
AND
ForEach(RS_Subfield in 14.024)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O14.025-SubfieldsCount(RS_Subfields in 14.025) MO [1 to 4]
AND
ForEach(RS_Subfield in 14.025)
{
Count(US_Subfields in RS_Subfield) EQ 2 + 2*{US_Subfield:2 in RS_Subfield}
}
T
1O14.902-SubfieldsCount(RS_Subfields in 14.902) GTE 1
AND
ForEach(RS_Subfield in 14.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
SubfieldsAND
ForEach(RS_Subfield in 14.021)
{
Count(US_Subfields in RS_Subfield) EQ 5
}
1O14.022-SubfieldsCount(RS_Subfields in 14.022) MO [1 to 4]
AND
ForEach(RS_Subfield in 14.022)
{
Count(US_Subfields in RS_Subfield) EQ 2
}
T
1O14.023-SubfieldsCount(RS_Subfields in 14.023) MO [1 to 9]
AND
ForEach(RS_Subfield in 14.023)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O14.024-SubfieldsCount(RS_Subfields in 14.024) MO [1 to 9]
AND
ForEach(RS_Subfield in 14.024)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O14.025-SubfieldsCount(RS_Subfields in 14.025) MO [1 to 4]
AND
ForEach(RS_Subfield in 14.025)
{
Count(US_Subfields in RS_Subfield) EQ 2 + 2*{US_Subfield:2 in RS_Subfield}
}
T
1O14.902-SubfieldsCount(RS_Subfields in 14.902) GTE 1
AND
ForEach(RS_Subfield in 14.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
}
1O14.904-SubfieldsCount(US_Subfields in 14.904) EQ 3T
1O14.995-SubfieldsCount(RS_Subfields in 14.995) MO [1 to 255]
AND
ForEach(RS_Subfield in 14.995)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
1O14.997-SubfieldsCount(RS_Subfields in 14.997) MO [1 to 255]
AND
ForEach(RS_Subfield in 14.997)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
O14.998-Subfields<See Requirement ID: “Field: Geographic-Conditional”>t-2
Field: Type14-CondCodeTable 67<Table 67 specifies the Condition Code for each field.>1-Type14-CondCodePresent(14.001 to 14.013, 14.999)
AND
NOT Present(14.019, 14.028, 14.029, 14.032 to 14.199, 14.901, 14.905 to 14.994)
B
Field: 14.014-Print Position Descriptors DependentTable 67, 8.14.14This field shall be present if and only if the finger position code “19” appears in Field 14.013: Friction ridge generalized position / FGP.D14.014-CondCode Dependent<See Requirement ID: “Field: PPD Conditional”>t-2
Field: 14.015-Print Position Coordinates DependentTable 67, 8.14.15This field may be present if and only if the finger position code “19” appears in Field 14.013: Friction ridge generalized position / FGP.D14.015-CondCode Dependent<See Requirement ID: “Field: PPD Conditional”>t-2
Field: 14.021-Finger Segment Position DependentTable 67, 8.14.20This optional field shall contain offsets to the locations of image segments containing the individual fingers within the flat images of simultaneous fingers from each hand or the two simultaneous thumbs. (FGP = 13, 14, 15 or 40-50 from Table 6 as entered in Field 14.013: Friction ridge generalized position / FGP).2D14.021-CondCode DependentIF {US_Subfield:1 in RS_Subfield:1 in 14.013} MO [13 to 15, 40 to 50] THEN
Present(14.021)
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
}
1O14.904-SubfieldsCount(US_Subfields in 14.904) EQ 3T
1O14.995-SubfieldsCount(RS_Subfields in 14.995) MO [1 to 255]
AND
ForEach(RS_Subfield in 14.995)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
1O14.997-SubfieldsCount(RS_Subfields in 14.997) MO [1 to 255]
AND
ForEach(RS_Subfield in 14.997)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
O14.998-Subfields<要件 ID: “Field: Geographic-Conditional”>t-2
Field: Type14-CondCodeTable 67<表 67 は、各フィールドの条件コードを規定しています。>1-Type14-CondCodePresent(14.001 to 14.013, 14.999)
AND
NOT Present(14.019, 14.028, 14.029, 14.032 to 14.199, 14.901, 14.905 to 14.994)
B
Field: 14.014-Print Position Descriptors DependentTable 67, 8.14.14このフィールドは、指位置コード「19」が Field 14.013: Friction ridge generalized position / FGP に現れる場合に限り、存在しなければなりません。D14.014-CondCode Dependent<要件 ID: “Field: PPD Conditional”>t-2
Field: 14.015-Print Position Coordinates DependentTable 67, 8.14.15このフィールドは、指位置コード「19」が Field 14.013: Friction ridge generalized position / FGP に現れる場合に限り、存在してもよいです。D14.015-CondCode Dependent<要件 ID: “Field: PPD Conditional”>t-2
Field: 14.021-Finger Segment Position DependentTable 67, 8.14.20この任意のフィールドは、各手の同時指の平面画像、または 2 本の同時親指の平面画像内で、各指を含む画像セグメントの位置を示すオフセットを保持しなければなりません。(FGP = 13、14、15 または 40-50 で、表 6 に基づき Field 14.013: Friction ridge generalized position / FGP に入力される値)。2D14.021-CondCode DependentIF {US_Subfield:1 in RS_Subfield:1 in 14.013} MO [13 to 15, 40 to 50] THEN
Present(14.021)
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Field: 14.027-Stitched Image Flag DependentTable 67, 8.14.20This field signifies that images captured separately were stitched together to form a single image. This field is mandatory if an image has been stitched, and the value shall be set to 'Y'. Otherwise, this field shall not appear in the record.3D14.027-CondCode Dependent<Not Tested. It is not feasible to detect if the image was stitched.>t-1B
Field: Type14-CharType8.14, Table 67<Table 67 specifies the Character Type for each field that contains no subfields.>1-Type14-CharType NBytes(14.[001,002,003, 005 to 010, 012, 016, 017, 026, 031]) MO [0x30 to 0x39]B
1-Type14-CharType ABytes(14.[011, 027, 030]) [0x41 to 0x5A, 0x61 to 0x7A]B
1-Type14-CharType UPresent(Bytes(14.020)B
1O14.020-CharType ANSBytes(14.020) MO [0x20, 0x7E]B
1O14.903-CharType Text ANSBytes{14.903} MO [0x20, 0x7E]B
1O14.996-CharType HBytes(10.996) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]B
Field: Type14-Subfield CharType8.14, Table 67<Table 67 specifies the Character Type for each subfield.>1M14.004-Subfield CharType UPresent( Bytes( US_Subfields:1,2 in 14.004 )B*
1M14.013-Subfield CharType NBytes(All(US_Subfields in 14.013)) MO [0x30 to 0x39]B*
1D14.014-Subfield CharType ANForEach(RS_Subfield in 14.014)
{
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39]
AND
Bytes(US_Subfield:2 in RS_Subfield) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
}
B*
1D14.015-Subfield CharType ANForEach(RS_Subfield in 14.015)
{
Bytes(US_Subfields:1 in RS_Subfield)) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
AND
Bytes(US_Subfields:2 in RS_Subfield)) MO [0x41 to 0x5A, 0x61 to 0x7A]
AND
Bytes(US_Subfields:3 to 6 in RS_Subfield)) MO [0x30 to 0x39]
}
B*
1O14.018-ForEach(RS_Subfield in 14.018)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Field: 14.027-Stitched Image Flag DependentTable 67, 8.14.20このフィールドは、別々に採取された画像が貼り合わされて 1 つの画像になったことを示します。画像が貼り合わされた場合、このフィールドは必須で、値は 'Y' に設定しなければなりません。それ以外の場合、このフィールドをレコードに含めてはなりません。3D14.027-CondCode Dependent<試験しません。画像が貼り合わされたかどうかを検出することは実現可能ではありません。>t-1B
Field: Type14-CharType8.14, Table 67<表 67 は、サブフィールドを含まない各フィールドの文字種別を規定しています。>1-Type14-CharType NBytes(14.[001,002,003, 005 to 010, 012, 016, 017, 026, 031]) MO [0x30 to 0x39]B
1-Type14-CharType ABytes(14.[011, 027, 030]) [0x41 to 0x5A, 0x61 to 0x7A]B
1-Type14-CharType UPresent(Bytes(14.020)B
1O14.020-CharType ANSBytes(14.020) MO [0x20, 0x7E]B
1O14.903-CharType Text ANSBytes{14.903} MO [0x20, 0x7E]B
1O14.996-CharType HBytes(10.996) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]B
Field: Type14-Subfield CharType8.14, Table 67<表 67 は、各サブフィールドの文字種別を規定しています。>1M14.004-Subfield CharType UPresent( Bytes( US_Subfields:1,2 in 14.004 )B*
1M14.013-Subfield CharType NBytes(All(US_Subfields in 14.013)) MO [0x30 to 0x39]B*
1D14.014-Subfield CharType ANForEach(RS_Subfield in 14.014)
{
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39]
AND
Bytes(US_Subfield:2 in RS_Subfield) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
}
B*
1D14.015-Subfield CharType ANForEach(RS_Subfield in 14.015)
{
Bytes(US_Subfields:1 in RS_Subfield)) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]
AND
Bytes(US_Subfields:2 in RS_Subfield)) MO [0x41 to 0x5A, 0x61 to 0x7A]
AND
Bytes(US_Subfields:3 to 6 in RS_Subfield)) MO [0x30 to 0x39]
}
B*
1O14.018-ForEach(RS_Subfield in 14.018)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Subfield CharType AN{
Bytes(US_Subfields:1 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:2 in RS_Subfield)) MO [0x41 to 0x5A, 0x61 to 0x7A]
}
1D14.021-Subfield CharType NBytes(All(US_Subfields in 14.021)) MO [0x30 to 0x39]B*
1O14.022-Subfield CharType NBytes(All(US_Subfields in 14.022)) MO [0x30 to 0x39]B*
1O14.023-Subfield CharType HNForEach(RS_Subfield in 14.023)
{
Bytes(US_Subfields:1,2,4 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:3 in RS_Subfield)) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1O14.024-Subfield CharType HNForEach(RS_Subfield in 14.024)
{
Bytes(US_Subfields:1,2,4 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:3 in RS_Subfield)) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1O14.025-Subfield CharType NBytes(All(US_Subfields in 14.025)) MO [0x30 to 0x39]B*
1O14.902-Subfield CharType ANUForEach(RS_Subfield in 14.902)
{
Present(Bytes(US_Subfields:2 to 4 in RS_Subfield))
AND
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39,0x5A]
}
B*
1O14.904-Subfield CharType UPresent(Bytes(All(US_Subfields in 14.904)))B*
1O14.995-Subfield CharType NBytes(All(US_Subfields:1,2 in 14.995)) MO [0x30 to 0x39]B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Subfield CharType AN{
Bytes(US_Subfields:1 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:2 in RS_Subfield)) MO [0x41 to 0x5A, 0x61 to 0x7A]
}
1D14.021-Subfield CharType NBytes(All(US_Subfields in 14.021)) MO [0x30 to 0x39]B*
1O14.022-Subfield CharType NBytes(All(US_Subfields in 14.022)) MO [0x30 to 0x39]B*
1O14.023-Subfield CharType HNForEach(RS_Subfield in 14.023)
{
Bytes(US_Subfields:1,2,4 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:3 in RS_Subfield)) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1O14.024-Subfield CharType HNForEach(RS_Subfield in 14.024)
{
Bytes(US_Subfields:1,2,4 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:3 in RS_Subfield)) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1O14.025-Subfield CharType NBytes(All(US_Subfields in 14.025)) MO [0x30 to 0x39]B*
1O14.902-Subfield CharType ANUForEach(RS_Subfield in 14.902)
{
Present(Bytes(US_Subfields:2 to 4 in RS_Subfield))
AND
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39,0x5A]
}
B*
1O14.904-Subfield CharType UPresent(Bytes(All(US_Subfields in 14.904)))B*
1O14.995-Subfield CharType NBytes(All(US_Subfields:1,2 in 14.995)) MO [0x30 to 0x39]B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1O14.997-Subfield CharType NBytes(All(US_Subfields:1,2 in 14.997)) MO [0x30 to 0x39]B*
O14.998-Subfield CharType ANSU<See Requirement ID: “Field: Geographic”>t-2
Field: Type14-CharCountTable 67<Table 67 specifies the Character Count for each field that contains no subfields.>1M14.001-CharCountDataLength(14.001) GTE 1B
1M14.002-CharCountDataLength(14.002) EQ 1 OR 2B
1M14.003-CharCountDataLength(14.003) EQ 1 OR 2B
1M14.005-CharCountDataLength(14.005) EQ 8B
1M14.006-CharCountDataLength(14.006) MO [2 to 5]B
1M14.007-CharCountDataLength(14.007) MO [2 to 5]B
1M14.008-CharCountDataLength(14.008) EQ 1B
1M14.009-CharCountDataLength(14.009) MO [1 to 5]B
1M14.010-CharCountDataLength(14.010) MO [1 to 5]B
1M14.011-CharCountDataLength(14.011) MO [3 to 5]B
1M14.012-CharCountDataLength(14.012) EQ 1 OR 2B
1O14.016-CharCountDataLength(14.016) MO [1 to 4]B
1O14.017-CharCountDataLength(14.017) MO [1 to 4]B
1O14.020-CharCountDataLength(14.020) MO [1 to 126]B
1O14.026-CharCountDataLength(14.026) MO [1 to 3]B
1D14.027-CharCountDataLength(14.027) EQ 1B
1O14.030-CharCountDataLength(14.030) MO [8 to 10]B
1O14.031-CharCountDataLength(14.031) EQ 2B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1O14.997-Subfield CharType NBytes(All(US_Subfields:1,2 in 14.997)) MO [0x30 to 0x39]B*
O14.998-Subfield CharType ANSU<要件 ID: “Field: Geographic” を参照してください。>t-2
Field: Type14-CharCountTable 67<表 67 は、サブフィールドを含まない各フィールドの文字数を規定しています。>1M14.001-CharCountDataLength(14.001) GTE 1B
1M14.002-CharCountDataLength(14.002) EQ 1 OR 2B
1M14.003-CharCountDataLength(14.003) EQ 1 OR 2B
1M14.005-CharCountDataLength(14.005) EQ 8B
1M14.006-CharCountDataLength(14.006) MO [2 to 5]B
1M14.007-CharCountDataLength(14.007) MO [2 to 5]B
1M14.008-CharCountDataLength(14.008) EQ 1B
1M14.009-CharCountDataLength(14.009) MO [1 to 5]B
1M14.010-CharCountDataLength(14.010) MO [1 to 5]B
1M14.011-CharCountDataLength(14.011) MO [3 to 5]B
1M14.012-CharCountDataLength(14.012) EQ 1 OR 2B
1O14.016-CharCountDataLength(14.016) MO [1 to 4]B
1O14.017-CharCountDataLength(14.017) MO [1 to 4]B
1O14.020-CharCountDataLength(14.020) MO [1 to 126]B
1O14.026-CharCountDataLength(14.026) MO [1 to 3]B
1D14.027-CharCountDataLength(14.027) EQ 1B
1O14.030-CharCountDataLength(14.030) MO [8 to 10]B
1O14.031-CharCountDataLength(14.031) EQ 2B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1O14.903-CharCountDataLength(14.903) MO [13 to 16]B
1O14.996-CharCountDataLength(14.995) EQ 64B
1M14.999-CharCountDataLength(14.999) GTE 1B
Field: Type14-Subfield CharCountTable 67<Table 67 specifies the Character Count for each subfield.>1M14.004-Subfield CharCountLength(All(US_Subfields in 14.004)) GTE 1B*
1M14.013-Subfield CharCountLength(All(US_Subfields in 14.013)) EQ 1 OR 2B*
1D14.014-Subfield CharCountLength(US_Subfield:1 in 14.014) EQ 1 OR 2
AND
Length(US_Subfield:2 in 14.014) EQ 3
B*
1D14.015-Subfield CharCountForEach(RS_Subfield in 14.015)
{
Length(US_Subfields:1 in RS_Subfield) EQ 2 OR 3
AND
Length(US_Subfields:2 in RS_Subfield) EQ 3
AND
Length(US_Subfields:3 to 6 in RS_Subfield) MO [1 to 5]
}
B*
1O14.018-Subfield CharCountForEach(RS_Subfield in 14.018)
{
Length(US_Subfields:1 in RS_Subfield) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield) EQ 2
}
B*
1D14.021-Subfield CharCountForEach(RS_Subfield in 14.021)
{
Length(US_Subfields:1 in RS_Subfield) EQ 1 OR 2
AND
Length(US_Subfields:2 to 5 in RS_Subfield) MO [1 to 5]
}
B*
1O14.022-Subfield CharCountForEach(RS_Subfield in 14.022)
{
Length(US_Subfields:1 in RS_Subfield) EQ 1 OR 2
AND
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1O14.903-CharCountDataLength(14.903) MO [13 to 16]B
1O14.996-CharCountDataLength(14.995) EQ 64B
1M14.999-CharCountDataLength(14.999) GTE 1B
Field: Type14-Subfield CharCountTable 67<表 67 は、各サブフィールドの文字数を規定しています。>1M14.004-Subfield CharCountLength(All(US_Subfields in 14.004)) GTE 1B*
1M14.013-Subfield CharCountLength(All(US_Subfields in 14.013)) EQ 1 OR 2B*
1D14.014-Subfield CharCountLength(US_Subfield:1 in 14.014) EQ 1 OR 2
AND
Length(US_Subfield:2 in 14.014) EQ 3
B*
1D14.015-Subfield CharCountForEach(RS_Subfield in 14.015)
{
Length(US_Subfields:1 in RS_Subfield) EQ 2 OR 3
AND
Length(US_Subfields:2 in RS_Subfield) EQ 3
AND
Length(US_Subfields:3 to 6 in RS_Subfield) MO [1 to 5]
}
B*
1O14.018-Subfield CharCountForEach(RS_Subfield in 14.018)
{
Length(US_Subfields:1 in RS_Subfield) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield) EQ 2
}
B*
1D14.021-Subfield CharCountForEach(RS_Subfield in 14.021)
{
Length(US_Subfields:1 in RS_Subfield) EQ 1 OR 2
AND
Length(US_Subfields:2 to 5 in RS_Subfield) MO [1 to 5]
}
B*
1O14.022-Subfield CharCountForEach(RS_Subfield in 14.022)
{
Length(US_Subfields:1 in RS_Subfield) EQ 1 OR 2
AND
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Length(US_Subfields:2 to 5 in RS_Subfield)) MO [1 to 3]
}
1O14.023-Subfield CharCountForEach(RS_Subfield in 14.023)
{
Length(US_Subfields:1 in RS_Subfield) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield) EQ 4
AND
Length(US_Subfields:4 in RS_Subfield) MO [1 to 5]
}
B*
1O14.024-Subfield CharCountForEach(RS_Subfield in 14.024)
{
Length(US_Subfield:1 in RS_Subfield) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield) EQ 4
AND
Length(US_Subfields:4 in RS_Subfield) MO [1 to 5]
}
B*
1O14.025-Subfield CharCountForEach(RS_Subfield in 14.025)
{
Length(US_Subfields:1,2 in RS_Subfield) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O14.902-Subfield CharCountForEach(RS_Subfield in 14.902)
{
Length(US_Subfield:1 in RS_Subfield) EQ 15
AND
Length(US_Subfields:2,3 in RS_Subfield) MO [1
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Length(US_Subfields:2 to 5 in RS_Subfield)) MO [1 to 3]
}
1O14.023-Subfield CharCountForEach(RS_Subfield in 14.023)
{
Length(US_Subfields:1 in RS_Subfield) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield) EQ 4
AND
Length(US_Subfields:4 in RS_Subfield) MO [1 to 5]
}
B*
1O14.024-Subfield CharCountForEach(RS_Subfield in 14.024)
{
Length(US_Subfield:1 in RS_Subfield) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield) EQ 4
AND
Length(US_Subfields:4 in RS_Subfield) MO [1 to 5]
}
B*
1O14.025-Subfield CharCountForEach(RS_Subfield in 14.025)
{
Length(US_Subfields:1,2 in RS_Subfield) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O14.902-Subfield CharCountForEach(RS_Subfield in 14.902)
{
Length(US_Subfield:1 in RS_Subfield) EQ 15
AND
Length(US_Subfields:2,3 in RS_Subfield) MO [1
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
to 64]
AND
Length(US_Subfield:4 in RS_Subfield) MO [1 to 255]
}
1O14.904-Subfield CharCountLength(All(US_Subfields in 14.904) MO [1 to 50]B*
1O14.995-Subfield CharCountForEach(RS_Subfield in 14.995)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
1O14.997-Subfield CharCountForEach(RS_Subfield in 14.997)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
O14.998-Subfield CharCount<See Requirement ID: “Field: Geographic”>t-2
Field: Type14-Field OccurrenceTable 67<Table 67 specifies the Field Occurrence for each field.>1-Type14-Occurrence ZeroCount(14.[019 ,028, 029, 032 to 199,901,905 to 994]) EQ 0B
1MType14-Occurrence OneCount(14.[001 to 013, 999]) EQ 1B
1-Type14-Occurrence One or FewerCount(14.[014 to 018,020 to 027,030, 031, 902 to 904, 995 to 998) LTE 1B
Field: 14.001-Record Header Value8.14.1, Table 67, 7.1Field 14.001 Record header. In Traditional encoding, this field contains the record length in bytes (including all information separators)M14.001-Record Header<See Requirement ID “Field: xx.001-Record Header”>t-2
8.14.1, C.10.12The XML name for the Type-14 record is <itl:PackageFingerprintImageRecord>, and its <biom:RecordCategoryCode> element shall have a value of “14”.1MNIEM-14.001-Record HeaderForEach(XElm(itl:PackageFingerprintImageRecord)
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(14)
}
X
Field: 14.002-Information Designation8.14.2, Table 67, 7.3.1This mandatory field shall be the IDC of this Type-14 record as found in the information item IDC of Field 1.003 Transaction content/CNT.M14.002-IDC<See Requirement IDs “Field: xx.002-IDC “and “Field: 1.003-Transaction Content Subfield 2 IDC Matches” >t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
to 64]
AND
Length(US_Subfield:4 in RS_Subfield) MO [1 to 255]
}
1O14.904-Subfield CharCountLength(All(US_Subfields in 14.904) MO [1 to 50]B*
1O14.995-Subfield CharCountForEach(RS_Subfield in 14.995)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
1O14.997-Subfield CharCountForEach(RS_Subfield in 14.997)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
O14.998-Subfield CharCount<要件 ID: “Field: Geographic” を参照してください。>t-2
Field: Type14-Field OccurrenceTable 67<表 67 は、各フィールドの出現回数を規定しています。>1-Type14-Occurrence ZeroCount(14.[019 ,028, 029, 032 to 199,901,905 to 994]) EQ 0B
1MType14-Occurrence OneCount(14.[001 to 013, 999]) EQ 1B
1-Type14-Occurrence One or FewerCount(14.[014 to 018,020 to 027,030, 031, 902 to 904, 995 to 998) LTE 1B
Field: 14.001-Record Header Value8.14.1, Table 67, 7.1フィールド 14.001(レコードヘッダー)。従来型エンコーディングでは、このフィールドは、すべての情報セパレーターを含むレコード長をバイト単位で保持します。M14.001-Record Header<要件 ID: “Field: xx.001-Record Header” を参照してください。>t-2
8.14.1, C.10.12Type-14 レコードの XML 名は <itl:PackageFingerprintImageRecord> で、その <biom:RecordCategoryCode> 要素の値は「14」でなければなりません。1MNIEM-14.001-Record HeaderForEach(XElm(itl:PackageFingerprintImageRecord)
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(14)
}
X
Field: 14.002-Information Designation8.14.2, Table 67, 7.3.1この必須フィールドは、Field 1.003 Transaction content/CNT の情報項目 IDC にある、この Type-14 レコードの IDC でなければなりません。M14.002-IDC<要件 ID: “Field: xx.002-IDC “および “Field: 1.003-Transaction Content Subfield 2 IDC Matches” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Character Value
Field: 14.003-Impression Type Value8.14.3, Table 67, 7.7.4.1This mandatory field shall indicate the manner by which the latent print was obtained.
See Section 7.7.4.1 for details.
<Table 67 lists the valid values for IMP.>
1M14.003-IMP{14.003} MO [0 to 3, 8, 20 to 29]B
Field: 14.004-Originating Agency Value8.14.4, 7.6This is a mandatory field. See Section 7.6 for details.M14.004-ORG<See Requirement ID “Field: Agency Codes” >t-2
Field: 14.005-Fingerprint Capture Date Value8.14.5, 7.7.2.3This mandatory field shall contain the date that the fingerprint data contained in the record was captured.1M14.005-FCD{14.005} MO [ValidLocalDate]t-6T
1MNIEM-14.005-FCDForEach(XElm(itl:PackageFingerprintRecord))
{
{XElm(nc:Date) in XElm(biom:CaptureDate)} MO [NIEM-ValidLocalDate]
}
t-6X
Field: 14.006-Horizontal Line Length Value8.14.6, Table 67, 7.7.8.1The maximum horizontal size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types. The minimum value is 10 pixels.M14.006-HLL<See Requirement ID “Field: Image HLL Value” >t-2
Field: 14.006-Horizontal Line Length Metadata8.14.6, Table 67, 7.7.8.1<The HLL is verified by checking the image metadata if compression is used.>2M14.006-HLL Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{14.006} EQ {ImageWidth-JPEGB,JPEGL}
t-11B
2M14.006-HLL Metadata JP2,JP2LIF {14.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {14.006} EQ {ImageWidth-JP2,JP2L}t-11B
2M14.006-HLL Metadata PNGIF {14.011} EQ ASCII(PNG) THEN
{14.006} EQ {ImageWidth-PNG}
t-11B
2M14.006-HLL Metadata WSQIF {14.011} EQ ASCII(WSQ20) THEN
{14.006} EQ {ImageWidth-WSQ}
t-11B
Field: 14.007-Vertical Line Length Value8.14.7, Table 67, 7.7.8.2The maximum vertical size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types.
The minimum value is 10 pixels.
M14.007-VLL<See Requirement ID “Field: Image VLL Value” >t-2
Field: 14.007-Vertical Line Length8.14.7, Table 67, 7.7.8.2<The VLL is verified by checking the image metadata if compression is used.>2M14.007-VLL Metadata JPEGB, JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{14.007} EQ {ImageHeight-JPEGB,JPEGL}
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Character Value
Field: 14.003-Impression Type Value8.14.3, Table 67, 7.7.4.1この必須フィールドは、遺留指紋が採取された方法を示さなければなりません。
詳細は 7.7.4.1 節を参照してください。
<表 67 は IMP の有効な値を列挙しています。>
1M14.003-IMP{14.003} MO [0 to 3, 8, 20 to 29]B
Field: 14.004-Originating Agency Value8.14.4, 7.6これは必須のフィールドです。詳細は 7.6 節を参照してください。M14.004-ORG<要件 ID: “Field: Agency Codes” を参照してください。>t-2
Field: 14.005-Fingerprint Capture Date Value8.14.5, 7.7.2.3この必須フィールドは、レコードに含まれる指紋データが採取された日付を保持しなければなりません。1M14.005-FCD{14.005} MO [ValidLocalDate]t-6T
1MNIEM-14.005-FCDForEach(XElm(itl:PackageFingerprintRecord))
{
{XElm(nc:Date) in XElm(biom:CaptureDate)} MO [NIEM-ValidLocalDate]
}
t-6X
Field: 14.006-Horizontal Line Length Value8.14.6, Table 67, 7.7.8.1水平方向の最大サイズは、Record Types-4 および 8 では 65,534 画素、その他のレコードタイプでは 99,999 に制限されます。最小値は 10 画素です。M14.006-HLL<要件 ID: “Field: Image HLL Value” を参照してください。>t-2
Field: 14.006-Horizontal Line Length Metadata8.14.6, Table 67, 7.7.8.1<HLL は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>2M14.006-HLL Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{14.006} EQ {ImageWidth-JPEGB,JPEGL}
t-11B
2M14.006-HLL Metadata JP2,JP2LIF {14.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {14.006} EQ {ImageWidth-JP2,JP2L}t-11B
2M14.006-HLL Metadata PNGIF {14.011} EQ ASCII(PNG) THEN
{14.006} EQ {ImageWidth-PNG}
t-11B
2M14.006-HLL Metadata WSQIF {14.011} EQ ASCII(WSQ20) THEN
{14.006} EQ {ImageWidth-WSQ}
t-11B
Field: 14.007-Vertical Line Length Value8.14.7, Table 67, 7.7.8.2垂直方向の最大サイズは、Record Types-4 および 8 では 65,534 画素、その他のレコードタイプでは 99,999 に制限されます。
最小値は 10 画素です。
M14.007-VLL<要件 ID: “Field: Image VLL Value” を参照してください。>t-2
Field: 14.007-Vertical Line Length8.14.7, Table 67, 7.7.8.2<VLL は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>2M14.007-VLL Metadata JPEGB, JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{14.007} EQ {ImageHeight-JPEGB,JPEGL}
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Metadata2M14.007-VLL Metadata JP2, JP2LIF {14.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {14.007} EQ {ImageHeight-JP2,JP2L}t-11B
2M14.007-VLL Metadata PNGIF {14.011} EQ ASCII(PNG) THEN
{14.007} EQ {ImageHeight-PNG}
t-11B
2M14.006-VLL Metadata WSQIF {14.011} EQ ASCII(WSQ20) THEN
{14.007} EQ {ImageHeight-WSQ}
t-11B
Field: 14.008-Scale Units Value8.14.8, Table 67, 7.7.8.3<Table 67 lists the value constraints for SLC>M14.008-SLC<See Requirement ID “Field: Image SLC Value” >t-2
Field: 14.008-Scale Units Metadata8.14.8, Table 67, 7.7.8.3A value of “1” shall indicate pixels per inch.
A value of “2” shall indicate pixels per centimeter. A value of “0” in this field indicates that no scale is provided, and the quotient of THPS/TVPS shall provide the pixel aspect ratio.
<The SLC is verified by checking the image metadata if compression is used.>
2M14.008-SLC Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN {14.008} EQ {SamplingUnits-JPEGB,JPEGL}t-11B
14.008-SLC Metadata JP2,JP2L<Not Tested.>t-12B
2M14.008-SLC Metadata PNGIF {14.011} EQ ASCII(PNG) THEN
IF {14.008} EQ 1 OR 2 THEN { SamplingUnits-PNG} EQ 1, ELSE IF {14.008} EQ 0 THEN { SamplingUnits-PNG} EQ 0
t-11B
14.008-SLC Metadata WSQ<Not Tested.>t-12B
Field: 14.009-Transmitted Horizontal Pixel Scale Value8.14.9, Table 67, 7.7.8.4<Table 67 lists the value constraints for THPS.>M14.009-THPS<See Requirement ID “Field: Image THPS Value” >t-2
Field: 14.009-Transmitted Horizontal Pixel Scale Metadata8.14.9, Table 67, 7.7.8.4This is the integer pixel density used in the horizontal direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the horizontal component of the pixel aspect ratio, up to 5 digits.
<The THPS is verified by checking the image metadata if compression is used.>
2M14.009-THPS Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {14.008} EQ 1 OR 2
THEN {14.009} EQ {HorizontalDensity-JPEGB,JPEGL}
t-11B
14.009-THPS Metadata JP2, JP2L<Not Tested.>t-12B
2M14.009-THPS Metadata PNGIF {14.011} EQ ASCII(PNG) AND {14.008} EQ 1 THEN {14.009} EQ {HorizontalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {14.011} EQ ASCII(PNG) AND {14.008} EQ
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Metadata2M14.007-VLL Metadata JP2, JP2LIF {14.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {14.007} EQ {ImageHeight-JP2,JP2L}t-11B
2M14.007-VLL Metadata PNGIF {14.011} EQ ASCII(PNG) THEN
{14.007} EQ {ImageHeight-PNG}
t-11B
2M14.006-VLL Metadata WSQIF {14.011} EQ ASCII(WSQ20) THEN
{14.007} EQ {ImageHeight-WSQ}
t-11B
Field: 14.008-Scale Units Value8.14.8, Table 67, 7.7.8.3<表 67 は SLC の値の制約を列挙しています。>M14.008-SLC<要件 ID: “Field: Image SLC Value” を参照してください。>t-2
Field: 14.008-Scale Units Metadata8.14.8, Table 67, 7.7.8.3値「1」は、インチあたりの画素数を示さなければなりません。
値「2」は、センチメートルあたりの画素数を示さなければなりません。このフィールドの値「0」は、縮尺が与えられていないことを示し、THPS/TVPS の商が画素アスペクト比を与えなければなりません。
<SLC は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
2M14.008-SLC Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN {14.008} EQ {SamplingUnits-JPEGB,JPEGL}t-11B
14.008-SLC Metadata JP2,JP2L<試験しません。>t-12B
2M14.008-SLC Metadata PNGIF {14.011} EQ ASCII(PNG) THEN
IF {14.008} EQ 1 OR 2 THEN { SamplingUnits-PNG} EQ 1, ELSE IF {14.008} EQ 0 THEN { SamplingUnits-PNG} EQ 0
t-11B
14.008-SLC Metadata WSQ<試験しません。>t-12B
Field: 14.009-Transmitted Horizontal Pixel Scale Value8.14.9, Table 67, 7.7.8.4<表 67 は THPS の値の制約を列挙しています。>M14.009-THPS<要件 ID: “Field: Image THPS Value” を参照してください。>t-2
Field: 14.009-Transmitted Horizontal Pixel Scale Metadata8.14.9, Table 67, 7.7.8.4これは、SLC の値が「1」または「2」の場合に画像の水平方向で使用される整数の画素密度です。SLC の値が「0」の場合、この情報項目は、画素アスペクト比の水平成分を最大 5 桁で保持しなければなりません。
<THPS は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
2M14.009-THPS Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {14.008} EQ 1 OR 2
THEN {14.009} EQ {HorizontalDensity-JPEGB,JPEGL}
t-11B
14.009-THPS Metadata JP2, JP2L<試験しません。>t-12B
2M14.009-THPS Metadata PNGIF {14.011} EQ ASCII(PNG) AND {14.008} EQ 1 THEN {14.009} EQ {HorizontalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {14.011} EQ ASCII(PNG) AND {14.008} EQ
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
2
THEN {14.009} EQ {HorizontalDensity-PNG} * 0.01 (meters/cm)
14.009-THPS Metadata WSQ<Not Tested.>t-12B
2M14.009-THPS Aspect Ratio Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {14.008} NEQ 1 OR 2
THEN {14.009}/{14.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
14.009-THPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M14.009-THPS Aspect Ratio Metadata PNGIF {14.011} EQ ASCII(PNG) AND {14.008} NEQ 1 OR 2
THEN {14.009}/{14.010} EQ {HorizontalDensity-PNG} / {VerticalDensity-PNG}
t-11B
14.009-THPS Aspect Ratio Metadata WSQ<Not Tested.>t-12B
Field: 14.010-Transmitted Vertical Pixel Scale Value8.14.10, Table 67, 7.7.8.5<Table 67 lists the value constraints for TVPS.>M14.010-TVPS<See Requirement ID “Field: Image TVPS Value” >t-2
Field: 14.010-Transmitted Vertical Pixel Scale Metadata8.14.10, Table 67, 7.7.8.5This is the integer pixel density used in the Vertical direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the Vertical component of the pixel aspect ratio, up to 5 digits.
<The TVPS is verified by checking the
2M14.010-TVPS Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND{14.008} EQ 1 OR2
THEN
{14.010} EQ {VerticalDensity-JPEGB,JPEGL}
t-11B
14.010-TVPS Metadata<Not Tested.>t-12B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
2
THEN {14.009} EQ {HorizontalDensity-PNG} * 0.01 (meters/cm)
14.009-THPS Metadata WSQ<試験しません。>t-12B
2M14.009-THPS Aspect Ratio Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {14.008} NEQ 1 OR 2
THEN {14.009}/{14.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
14.009-THPS Aspect Ratio Metadata JP2, JP2L<試験しません。>t-12B
2M14.009-THPS Aspect Ratio Metadata PNGIF {14.011} EQ ASCII(PNG) AND {14.008} NEQ 1 OR 2
THEN {14.009}/{14.010} EQ {HorizontalDensity-PNG} / {VerticalDensity-PNG}
t-11B
14.009-THPS Aspect Ratio Metadata WSQ<試験しません。>t-12B
Field: 14.010-Transmitted Vertical Pixel Scale Value8.14.10, Table 67, 7.7.8.5<表 67 は TVPS の値の制約を列挙しています。>M14.010-TVPS<要件 ID: “Field: Image TVPS Value” を参照してください。>t-2
Field: 14.010-Transmitted Vertical Pixel Scale Metadata8.14.10, Table 67, 7.7.8.5これは、SLC の値が「1」または「2」の場合に画像の垂直方向で使用される整数の画素密度です。SLC の値が「0」の場合、この情報項目は、画素アスペクト比の垂直成分を最大 5 桁で保持しなければなりません。
<TVPS は、
2M14.010-TVPS Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND{14.008} EQ 1 OR2
THEN
{14.010} EQ {VerticalDensity-JPEGB,JPEGL}
t-11B
14.010-TVPS Metadata<試験しません。>t-12B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
image metadata if compression is used.>JP2, JP2L
2M14.010-TVPS Metadata PNGIF {14.011} EQ ASCII(PNG)) AND {14.008} EQ 1 THEN {14.010} EQ {VerticalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {14.011} EQ ASCII(PNG)) AND {14.008} EQ 2
THEN {14.010} EQ {VerticalDensity-PNG} * 0.01 (meters/cm)
t-11B
14.010-TVPS Metadata WSQ<Not Tested.>t-12B
2M14.010-TVPS Aspect Ratio Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {14.008} NEQ 1 OR 2
THEN {14.009}/{14.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
14.010-TVPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M14.010-TVPS Aspect Ratio Metadata PNGIF {14.011} EQ ASCII(PNG) AND{14.008} NEQ 1 OR 2
THEN {14.009}/{14.010} EQ {HorizontalDensity - PNG} / {VerticalDensity-PNG}
t-11B
14.010-TVPS Aspect Ratio Metadata WSQ<Not Tested.>t-12B
Field: 14.011-Compression Algorithm Value8.14.11, Table 67, 7.7.9.1For each of these fields, the entry corresponds to the appropriate Label entry in Table 12: Field 14.011: Compression algorithm / CGA.1M14.011-CGA{14.011} MO [ASCII(NONE, JPEGB, JPEGL, JP2, JP2L, PNG, WSQ)]t-98B
Field: 14.011-Compressio8.14.11, Table 67<The CGA is verified by checking the image metadata for the compression type signature if compression is used.>2M14.011-CGAMetadataIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(SOI -JPEG,JPEGL)
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
圧縮が使用されている場合は、画像メタデータを確認することで検証されます。>JP2, JP2L
2M14.010-TVPS Metadata PNGIF {14.011} EQ ASCII(PNG)) AND {14.008} EQ 1 THEN {14.010} EQ {VerticalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {14.011} EQ ASCII(PNG)) AND {14.008} EQ 2
THEN {14.010} EQ {VerticalDensity-PNG} * 0.01 (meters/cm)
t-11B
14.010-TVPS Metadata WSQ<試験しません。>t-12B
2M14.010-TVPS Aspect Ratio Metadata JPEGB,JPEGLIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {14.008} NEQ 1 OR 2
THEN {14.009}/{14.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
14.010-TVPS Aspect Ratio Metadata JP2, JP2L<試験しません。>t-12B
2M14.010-TVPS Aspect Ratio Metadata PNGIF {14.011} EQ ASCII(PNG) AND{14.008} NEQ 1 OR 2
THEN {14.009}/{14.010} EQ {HorizontalDensity - PNG} / {VerticalDensity-PNG}
t-11B
14.010-TVPS Aspect Ratio Metadata WSQ<試験しません。>t-12B
Field: 14.011-Compression Algorithm Value8.14.11, Table 67, 7.7.9.1これらの各フィールドでは、エントリーは表 12: Field 14.011: Compression algorithm / CGA の該当する Label エントリーに対応します。1M14.011-CGA{14.011} MO [ASCII(NONE, JPEGB, JPEGL, JP2, JP2L, PNG, WSQ)]t-98B
Field: 14.011-Compressio8.14.11, Table 67<圧縮が使用されている場合、画像メタデータの圧縮タイプのシグネチャを確認することで、CGA が検証されます。>2M14.011-CGAMetadataIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(SOI -JPEG,JPEGL)
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
n Algorithm MetadataJPEGB,JPEGL
2M14.011-CGA Metadata JP2, JP2LIF {14.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox)t-11B
2M14.011-CGA Metadata PNGIF {14.011} EQ ASCII(PNG) THEN
Present(PNGSig)
t-11B
2M14.011-CGA Metadata WSQIF {14.011} EQ ASCII(WSQ20) THEN Present(SOI-WSQ)t-11B
Field: 14.012-Bits Per Pixel Value8.14.12, Table 67, 7.7.8.6This field shall contain an entry of “8” for normal grayscale values of “0” to “255”. Any entry in this field greater than “8” shall represent a grayscale pixel with increased proportion.M14.012-BPX<See Requirement ID “Field: Image BPX Value” >t-2
Field: 14.012- Bits Per Pixel Metadata8.14.12, Table 67<The BPX is verified by checking the image metadata for the compression type signature if compression is used.>2M14.012-BPX Metadata JPEGB,JPEGL{14.012} EQ {BPX-JPEG, JPEGL}t-11B
2M14.012-BPX Metadata JP2, JP2L{14.012} EQ {BPX-JP2,JP2L}t-11B
2M14.012-BPX Metadata PNG{14.012} EQ {BPX-PNG}t-11B
14.012-BPX Metadata WSQ<Not Tested.>t-12B
Field: 14.013-Friction Ridge Generalized Position Value8.14.13, Table 67, 7.7.4.2, Table 6See Section 7.7.4.2 for details.1M14.013-FGP Value{14.013} MO [1 to 19, 33 to 36, 40 to 50]B
Field: 14.014-Search Position Descriptors Value8.14.14, Table 67, 7.7.4.3…described in Section 7.7.4.3D14.014-PPD Value<See Requirement ID: “Field: SPD,PPD Values”>t-2
Field: 14.014-Search Position8.14.14, Table 67This field shall be present if and only if the finger position code “19” appears in Field 14.013: Friction ridge generalized position / FGP.D14.014-PPD Conditional<See Requirement ID: “Field: PPD Conditional”>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
n Algorithm MetadataJPEGB,JPEGL
2M14.011-CGA Metadata JP2, JP2LIF {14.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox)t-11B
2M14.011-CGA Metadata PNGIF {14.011} EQ ASCII(PNG) THEN
Present(PNGSig)
t-11B
2M14.011-CGA Metadata WSQIF {14.011} EQ ASCII(WSQ20) THEN Present(SOI-WSQ)t-11B
Field: 14.012-Bits Per Pixel Value8.14.12, Table 67, 7.7.8.6グレースケール値「0」〜「255」の通常の値には、このフィールドに「8」を含めなければなりません。このフィールドの「8」より大きい値は、階調の幅が広いグレースケール画素を表さなければなりません。M14.012-BPX<要件 ID: “Field: Image BPX Value” を参照してください。>t-2
Field: 14.012- Bits Per Pixel Metadata8.14.12, Table 67<BPX は、圧縮が使用されている場合、画像メタデータの圧縮タイプのシグネチャを確認することで検証されます。>2M14.012-BPX Metadata JPEGB,JPEGL{14.012} EQ {BPX-JPEG, JPEGL}t-11B
2M14.012-BPX Metadata JP2, JP2L{14.012} EQ {BPX-JP2,JP2L}t-11B
2M14.012-BPX Metadata PNG{14.012} EQ {BPX-PNG}t-11B
14.012-BPX Metadata WSQ<試験しません。>t-12B
Field: 14.013-Friction Ridge Generalized Position Value8.14.13, Table 67, 7.7.4.2, Table 6詳細は 7.7.4.2 節を参照してください。1M14.013-FGP Value{14.013} MO [1 to 19, 33 to 36, 40 to 50]B
Field: 14.014-Search Position Descriptors Value8.14.14, Table 67, 7.7.4.3…7.7.4.3 節に記載D14.014-PPD Value<要件 ID: “Field: SPD,PPD Values” を参照してください。>t-2
Field: 14.014-Search Position8.14.14, Table 67このフィールドは、指位置コード「19」が Field 14.013: Friction ridge generalized position / FGP に現れる場合に限り、存在しなければなりません。D14.014-PPD Conditional<要件 ID: “Field: PPD Conditional” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Descriptors Conditional
Field: 14.015-Print Position Coordinates Value8.14.15, Table 67, 7.7.4.4See section 7.7.4.4D14.015-PPC Value<See Requirement IDs: “Field: PPC-Subfield 1” through
“Field: PPC-Subfields 5,6”.>
t-2
Field: 14.015- Print Position Coordinates Conditional8.14.15, Table 67This field may be present if and only if the finger position code “19” appears in Field 14.013: Friction ridge generalized position / FGP.D14.015-PPC Conditional<See Requirement ID: “Field: SPD,PPC Conditional”>t-2
Field: 14.016-Scanned Horizontal Pixel Scale Value8.14.16, Table 67, 7.7.8.7See section 7.7.8 for details.O14.016-SHPS Value<See Requirement IDs: “Field: Image SHPS Value”>t-2
Field: 14.017-Scanned Vertical Pixel Scale Value8.14.17, Table 67, 7.7.8.8See section 7.7.8 for details.O14.016-SVPS Value<See Requirement IDs: “Field: Image SVPS Value”>t-2
Field: 14.018-Amputated Or Bandaged Value8.14.18, Table 67, Table 68<Table 67 lists the value constraints for AMP.>1M⇑14.018-Subfield 1-FGPForEach(RS_Subfield in 14.018)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16,17]
}
B*
1M⇑14.018-Subfield 2-FMCForEach(RS_Subfield in 14.018)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII( XX,UP)]
}
B*
Field: 14.019-ReservedTable 67Reserved for future useonly by ANSI/NIST-ITL.-14.019-Reserved<See Requirement ID: “Field: Type14-CondCode>.t-2
Field: 14.020-Comment Value8.14.19, Table 67, 7.4.4See section 7.4.4 for details.O14.020-COM<See Requirement ID: “Field: Comment>.t-2
Field: 14.021-Fingerprint Segment Position8.14.20, Table 67, Table 6<Table 67 lists the value constraints for SEG.>1M⇑14.021-Subfield 1-FGPForEach(RS_Subfield in 14.021)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16,17]
}
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Descriptors Conditional
Field: 14.015-Print Position Coordinates Value8.14.15, Table 67, 7.7.4.47.7.4.4 節を参照D14.015-PPC Value<要件 ID: “Field: PPC-Subfield 1” から
“Field: PPC-Subfields 5,6” までを参照してください。>
t-2
Field: 14.015- Print Position Coordinates Conditional8.14.15, Table 67このフィールドは、指位置コード「19」が Field 14.013: Friction ridge generalized position / FGP に現れる場合に限り、存在してもよいです。D14.015-PPC Conditional<要件 ID: “Field: SPD,PPC Conditional” を参照してください。>t-2
Field: 14.016-Scanned Horizontal Pixel Scale Value8.14.16, Table 67, 7.7.8.7詳細は 7.7.8 節を参照してください。O14.016-SHPS Value<要件 ID: “Field: Image SHPS Value” を参照してください。>t-2
Field: 14.017-Scanned Vertical Pixel Scale Value8.14.17, Table 67, 7.7.8.8詳細は 7.7.8 節を参照してください。O14.016-SVPS Value<要件 ID: “Field: Image SVPS Value” を参照してください。>t-2
Field: 14.018-Amputated Or Bandaged Value8.14.18, Table 67, Table 68<表 67 は AMP の値の制約を列挙しています。>1M⇑14.018-Subfield 1-FGPForEach(RS_Subfield in 14.018)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16,17]
}
B*
1M⇑14.018-Subfield 2-FMCForEach(RS_Subfield in 14.018)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII( XX,UP)]
}
B*
Field: 14.019-ReservedTable 67ANSI/NIST-ITL の将来の使用のために予約されています。-14.019-Reserved<要件 ID: “Field: Type14-CondCode>.t-2
Field: 14.020-Comment Value8.14.19, Table 67, 7.4.4詳細は 7.4.4 節を参照してください。O14.020-COM<要件 ID: “Field: Comment>.t-2
Field: 14.021-Fingerprint Segment Position8.14.20, Table 67, Table 6<表 67 は SEG の値の制約を列挙しています。>1M⇑14.021-Subfield 1-FGPForEach(RS_Subfield in 14.021)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16,17]
}
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Value2M⇑14.021-Subfield 2-LHCForEach(RS_Subfield in 14.021)
{
{US_Subfield:2 in RS_Subfield} LTE {14.006}
}
B*
2M⇑14.021-Subfield 3-LHCForEach(RS_Subfield in 14.021)
{
{US_Subfield:3 in RS_Subfield} LTE {14.006} AND GTE {US_Subfield:2 in 14.021}
}
B*
2M⇑14.021-Subfield 4-LHCForEach(RS_Subfield in 14.021)
{
{US_Subfield:4 in RS_Subfield} LTE {14.007}
}
B*
2M⇑14.021-Subfield 5-LHCForEach(RS_Subfield in 14.021)
{
{US_Subfield:2 in RS_Subfield} LTE {14.007} AND GTE {US_Subfield:4 in 14.021}
}
B*
Field: 14.021-Fingerprint Segment Position Conditional8.14.15, Table 67This optional field shall contain offsets to the locations of image segments containing the individual fingers within the flat images of simultaneous fingers from each hand or the two simultaneous thumbs. (FGP = 13, 14, 15 or 40-50 from Table 6 as entered in Field 14.013: Friction ridge generalized position / FGP).D14.021-SEG Conditional<See Requirement ID: “Field: 14.021-Finger Segment Position Dependent”>t-2
Field: 14.022-NIST Quality Metric Value8.14.21, Table 67, Table 6<Table 67 lists the value constraints for NQM.>1M⇑14.022-Subfield 1-FGPForEach(RS_Subfield in 14.022)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16,17]
}
B*
1M⇑14.022-Subfield 2-IQSForEach(RS_Subfield in 14.022)
{
{US_Subfield:2 in RS_Subfield} MO [1 to 5, 254, 255]
}
B*
Field: 14.023-Segmentation Qualtiy Metric Value8.14.22, Table 67, Table 6<Table 67 lists the value constraints for SQM.>M⇑14.023-SQM<See Requirement ID: “Field: Sample Quality Occurrences”, “Field: Sample Quality Subfield 1”, “Field: Sample Quality Subfield 2”, and “Field: Sample Quality Subfield 3”.>t-2
Field: 14.024-Finger Quality8.14.23, Table 67, Table 6<Table 67 lists the value constraints for FQM.>O14.024-FQM<See Requirement ID: “Field: Sample Quality Occurrences”, “Field: Sample Quality Subfield 1”, “Field: Sample Quality Subfield 2”, and “Field: Sample Quality Subfield 3”.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Value2M⇑14.021-Subfield 2-LHCForEach(RS_Subfield in 14.021)
{
{US_Subfield:2 in RS_Subfield} LTE {14.006}
}
B*
2M⇑14.021-Subfield 3-LHCForEach(RS_Subfield in 14.021)
{
{US_Subfield:3 in RS_Subfield} LTE {14.006} AND GTE {US_Subfield:2 in 14.021}
}
B*
2M⇑14.021-Subfield 4-LHCForEach(RS_Subfield in 14.021)
{
{US_Subfield:4 in RS_Subfield} LTE {14.007}
}
B*
2M⇑14.021-Subfield 5-LHCForEach(RS_Subfield in 14.021)
{
{US_Subfield:2 in RS_Subfield} LTE {14.007} AND GTE {US_Subfield:4 in 14.021}
}
B*
Field: 14.021-Fingerprint Segment Position Conditional8.14.15, Table 67この任意のフィールドは、各手の同時指の平面画像、または 2 本の同時親指の平面画像の中で、個々の指を含む画像セグメントの位置へのオフセットを保持しなければなりません。(FGP = 13、14、15 または 40〜50 で、表 6 から Field 14.013: Friction ridge generalized position / FGP に入力されたもの)。D14.021-SEG Conditional<要件 ID: “Field: 14.021-Finger Segment Position Dependent” を参照してください。>t-2
Field: 14.022-NIST Quality Metric Value8.14.21, Table 67, Table 6<表 67 は NQM の値の制約を列挙しています。>1M⇑14.022-Subfield 1-FGPForEach(RS_Subfield in 14.022)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16,17]
}
B*
1M⇑14.022-Subfield 2-IQSForEach(RS_Subfield in 14.022)
{
{US_Subfield:2 in RS_Subfield} MO [1 to 5, 254, 255]
}
B*
Field: 14.023-Segmentation Qualtiy Metric Value8.14.22, Table 67, Table 6<表 67 は SQM の値の制約を列挙しています。>M⇑14.023-SQM<要件 ID: “Field: Sample Quality Occurrences”, “Field: Sample Quality Subfield 1”, “Field: Sample Quality Subfield 2”, and “Field: Sample Quality Subfield 3”. を参照してください。>t-2
Field: 14.024-Finger Quality8.14.23, Table 67, Table 6<表 67 は FQM の値の制約を列挙しています。>O14.024-FQM<要件 ID: “Field: Sample Quality Occurrences”, “Field: Sample Quality Subfield 1”, “Field: Sample Quality Subfield 2”, and “Field: Sample Quality Subfield 3”. を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Metric Value
Field: 14.025-Alternate Finger Segment Position(s) Value8.14.24, Table 67, Table 6<Table 67 lists the value constraints for ASEG.>1M⇑14.025-Subfield 1 - FGPForEach(RS_Subfield in 14.025)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16, 17]
}
B*
1M⇑14.025-Subfield 2-NOPForEach(RS_Subfield in 14.025)
{
{US_Subfield:2 in RS_Subfield} MO [3 to 99]
}
B*
2M⇑14.025-Subfield PairForEach(RS_Subfield in 14.025)
{
For(X EQ 3 to {US_Subfield:2 in RS_Subfield})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {14.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {14.006}
}
}
B*
Field: 14.025-Alternate Finger Segment Position(s) Polygon8.14.24, Table 67, Section 7.8The order of the vertices shall be in their consecutive order around the perimeter of the polygon, either clockwise or counterclockwise.2O14.025-ASEG Order<Angle.Direction.First EQ ((X,Y).1 To (X,Y).2).Angle.Direction; ((X,Y).2 To N‐1 to (X,Y).3 To N).Angle.Direction EQ Angle.Direction.First; ((X,Y).N To (X,Y).1).Angle.Direction EQ Angle.Direction.First.>B*
No two vertices may occupy the same location.2O14.025-ASEG Polygon<Each Vertex (X, Y) is unique>B*
The polygon side defined by the last vertex and the first vertex shall complete the polygon.
The polygon shall be a simple, plane figure with no sides crossing and no interior holes.
2O14.025-ASEG Polygon<Not Tested.>t-14
Field: 14.026-Simultaneous Capture Value8.14.25, Table 67<Table 67 lists the value constraints for SCF.>1O14.026-SCF{14.026} MO [1 to 255]B
Field: 14.027-Stitched8.14.26, Table 67<Table 67 lists the value constraints for SCF.>1D14.027-SIF{14.027} EQ ASCII(Y)B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Metric Value
Field: 14.025-Alternate Finger Segment Position(s) Value8.14.24, Table 67, Table 6<表 67 は ASEG の値の制約を列挙しています。>1M⇑14.025-Subfield 1 - FGPForEach(RS_Subfield in 14.025)
{
{US_Subfield:1 in RS_Subfield} MO [1 to 10, 16, 17]
}
B*
1M⇑14.025-Subfield 2-NOPForEach(RS_Subfield in 14.025)
{
{US_Subfield:2 in RS_Subfield} MO [3 to 99]
}
B*
2M⇑14.025-Subfield PairForEach(RS_Subfield in 14.025)
{
For(X EQ 3 to {US_Subfield:2 in RS_Subfield})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {14.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {14.006}
}
}
B*
Field: 14.025-Alternate Finger Segment Position(s) Polygon8.14.24, Table 67, Section 7.8頂点の順序は、多角形の周囲に沿った連続した順序で、時計回りまたは反時計回りでなければなりません。2O14.025-ASEG Order<Angle.Direction.First EQ ((X,Y).1 To (X,Y).2).Angle.Direction; ((X,Y).2 To N‐1 to (X,Y).3 To N).Angle.Direction EQ Angle.Direction.First; ((X,Y).N To (X,Y).1).Angle.Direction EQ Angle.Direction.First.>B*
2 つの頂点が同じ位置に存在してはなりません。2O14.025-ASEG Polygon<各頂点 (X, Y) は一意です>B*
最後の頂点と最初の頂点で定義される多角形の辺は、多角形を閉じなければなりません。
多角形は、辺が交差せず内部に穴のない、単純な平面図形でなければなりません。
2O14.025-ASEG Polygon<試験しません。>t-14
Field: 14.026-Simultaneous Capture Value8.14.25, Table 67<表 67 は SCF の値の制約を列挙しています。>1O14.026-SCF{14.026} MO [1 to 255]B
Field: 14.027-Stitched8.14.26, Table 67<表 67 は SIF の値の制約を列挙しています。>1D14.027-SIF{14.027} EQ ASCII(Y)B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Image Flag Value
Field: 14.027-Stitched Image Flag Conditional8.14.26, Table 67This field signifies that images captured separately were stitched together to form a single image. This field is mandatory if an image has been stitched, and the value shall be set to 'Y'. Otherwise, this field shall not appear in the record.D14.027-SIF Conditional<See Requirement ID: “Field: 14.027-Stitched Image Flag Dependent”>t-2
Field: 14.028, 14.029-ReservedTable 67Reserved for future useonly by ANSI/NIST-ITL.-14.028, 14.029 Reserved<See Requirement ID: “Field: Type14-CondCode>.t-2
Field: 14.030-Device Monitoring Mode Value8.14.27, Table 67<Table 67 lists the value constraints for DMM.>1O14.030-DMM{14.030} MO ASCII(CONTROLLED, ASSISTED, OBSERVED, UNATTENDED, UNKNOWN)B
Field: 14.031-Subject Acquisition Profile-Fingerprint Value8.14.28, Table 67<Table 67 lists the value constraints for FAP.>1O14.031-FAP{14.031} MO [10, 20, 30, 40, 45, 50, 60]B
Field: 14.032 to 14.199-ReservedTable 67Reserved for future useonly by ANSI/NIST-ITL.-14.032 to 14.199 Reserved<See Requirement ID: “Field: Type14-CondCode>.t-2
Field: 14.200 to 14.900-User DefinedTable 67User Defined Fields-14.200 to 14.900-User DefinedTRUEB
Field: 14.901-ReservedTable 67Reserved for future useonly by ANSI/NIST-ITL.-14.901-Reserved<See Requirement ID: “Field: Type14-CondCode>.t-2
Field: 14.902-Annotated Information Value8.14.30, Table 67This is an optional field, listing the operations performed on the original source in order to prepare it for inclusion in a biometric record type. See Section 7.4.1.O14.902-ANN-Value<See Requirement ID: “Field: xx.902-ANN” >.t-2
Field: 14.903-Device Unique Identifier Value8.14.31, Table 67This is an optional field. See Section 7.7.1.1.O14.903-DUI Value<See Requirement ID: “Field: Device ID” >.t-2
Field:8.14.32,This is an optional field. See SectionO14.904-<See Requirement ID: “Field: Make Model” >.t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Image Flag Value
Field: 14.027-Stitched Image Flag Conditional8.14.26, Table 67このフィールドは、別々に採取された画像が貼り合わされて 1 つの画像になったことを示します。画像が貼り合わされている場合、このフィールドは必須で、値を「Y」に設定しなければなりません。それ以外の場合、このフィールドをレコードに含めてはなりません。D14.027-SIF Conditional<要件 ID: “Field: 14.027-Stitched Image Flag Dependent” を参照してください。>t-2
Field: 14.028, 14.029-ReservedTable 67ANSI/NIST-ITL のみが将来使用するために予約されています。-14.028, 14.029 Reserved<要件 ID: “Field: Type14-CondCode>.t-2
Field: 14.030-Device Monitoring Mode Value8.14.27, Table 67<表 67 は DMM の値の制約を列挙しています。>1O14.030-DMM{14.030} MO ASCII(CONTROLLED, ASSISTED, OBSERVED, UNATTENDED, UNKNOWN)B
Field: 14.031-Subject Acquisition Profile-Fingerprint Value8.14.28, Table 67<表 67 は FAP の値の制約を列挙しています。>1O14.031-FAP{14.031} MO [10, 20, 30, 40, 45, 50, 60]B
Field: 14.032 to 14.199-ReservedTable 67ANSI/NIST-ITL のみが将来使用するために予約されています。-14.032 to 14.199 Reserved<要件 ID: “Field: Type14-CondCode を参照してください。>t-2
Field: 14.200 to 14.900-User DefinedTable 67User Defined Fields-14.200 to 14.900-User DefinedTRUEB
Field: 14.901-ReservedTable 67ANSI/NIST-ITL のみが将来使用するために予約されています。-14.901-Reserved<要件 ID: “Field: Type14-CondCode を参照してください。>t-2
Field: 14.902-Annotated Information Value8.14.30, Table 67これは任意のフィールドで、元の情報源に対して行った、生体情報レコードタイプに含めるための準備操作を列挙します。7.4.1 節を参照してください。O14.902-ANN-Value<要件 ID: “Field: xx.902-ANN” を参照してください。>t-2
Field: 14.903-Device Unique Identifier Value8.14.31, Table 67これは任意のフィールドです。7.7.1.1 節を参照してください。O14.903-DUI Value<要件 ID: “Field: Device ID” を参照してください。>t-2
Field:8.14.32,これは任意のフィールドです。参照先はO14.904-<要件 ID: “Field: Make Model” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
14.904-Make/Model/Serial Number ValueTable 677.7.1.2.MMS Value
Field: 14.905, 14.994-ReservedTable 67Reserved for future useonly by ANSI/NIST-ITL.-14.905, 14.994-Reserved<See Requirement ID: “Field: Type14-CondCode>.t-2
Field: 14.995-Associated Context Value8.14.33, Table 67See Section 7.3.3O14.995-ASC Value<See Requirement IDs: “Field: xx.995-ASC” and “Field: xx.995-ASC-ACN” and
“Field: xx.995-ASC-ASP”>.
t-2
Field: 14.996-Hash Value8.14.34, Table 67See Section 7.5.2O14.996-HAS Value<See Requirement ID: “Field: HAS”>t-2
Field: 14.997-Source Representation Value8.14.35, Table 67See Section 7.3.2O14.997-SOR Value<See Requirement IDs: “Field: xx.997-SOR” and “Field: xx.997-SOR-SRN” and
“Field: xx.997-SOR-RSP”>.
t-2
Field: 14.998-Geographic Sample Acquisition Location Value8.14.36, Table 67See Section 7.7.3O14.998-GEO Value<See Requirement IDs: “Field: Geographic”, “Field: Geographic-Conditional”, “Field: Geographic-Subfield 1” through “Field: Geographic-Values-SubField 15” >.t-2
Field: 14.999-Image Data Valid8.14.37, Table 67This is a mandatory field contains the image.
<The image metadata is checked for validity.>
2M14.999-DATA Uncompressed ValidIF {14.011} EQ ASCII(NONE) THEN
Length(14.999) EQ 14.006} * {14.007}
B
2M14.999-DATA JPEGB,JPEGL ValidIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(JFIF,
SOI-JPEGB,JPEGL,
SOF-JPEGB,JPEGL,
EOI-JPEG, JPEGL)
t-11B
2M14.999-DATA JP2,JP2L ValidIF {14.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox,
HeadBox,
ImgBox)
t-11B
2M14.999-DATA PNG ValidIF {14.011} EQ ASCII(PNG) THEN
Present(PNGSig,
IHDR,
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
14.904-Make/Model/Serial Number ValueTable 677.7.1.2 節です。MMS Value
Field: 14.905, 14.994-ReservedTable 67ANSI/NIST-ITL のみによる将来の使用のために予約されています。-14.905, 14.994-Reserved<要件 ID: “Field: Type14-CondCode を参照してください。>t-2
Field: 14.995-Associated Context Value8.14.33, Table 677.3.3 節を参照してください。O14.995-ASC Value<要件 ID: “Field: xx.995-ASC” および “Field: xx.995-ASC-ACN” および
“Field: xx.995-ASC-ASP” を参照してください。>
t-2
Field: 14.996-Hash Value8.14.34, Table 677.5.2 節を参照してください。O14.996-HAS Value<要件 ID: “Field: HAS” を参照してください。>t-2
Field: 14.997-Source Representation Value8.14.35, Table 677.3.2 節を参照してください。O14.997-SOR Value<要件 ID: “Field: xx.997-SOR” および “Field: xx.997-SOR-SRN” および
“Field: xx.997-SOR-RSP” を参照してください。>
t-2
Field: 14.998-Geographic Sample Acquisition Location Value8.14.36, Table 677.7.3 節を参照してください。O14.998-GEO Value<要件 ID: “Field: Geographic”, “Field: Geographic-Conditional”, “Field: Geographic-Subfield 1” through “Field: Geographic-Values-SubField 15” を参照してください。>t-2
Field: 14.999-Image Data Valid8.14.37, Table 67これは必須のフィールドで、画像を含みます。
<画像メタデータが有効かどうかを確認します。>
2M14.999-DATA Uncompressed ValidIF {14.011} EQ ASCII(NONE) THEN
Length(14.999) EQ 14.006} * {14.007}
B
2M14.999-DATA JPEGB,JPEGL ValidIF {14.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(JFIF,
SOI-JPEGB,JPEGL,
SOF-JPEGB,JPEGL,
EOI-JPEG, JPEGL)
t-11B
2M14.999-DATA JP2,JP2L ValidIF {14.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox,
HeadBox,
ImgBox)
t-11B
2M14.999-DATA PNG ValidIF {14.011} EQ ASCII(PNG) THEN
Present(PNGSig,
IHDR,
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
IDAT,
IEND)
2M14.999-DATA WSQ ValidIF {14.999} EQ ASCII(WSQ20) THEN Present(SOI-WSQ,SOF-WSQ,SOB-WSQ,EOI-WSQ)t-11B
Field: 14.999-Image WSQ Version 3.17.7.9.1Only version 3.1 or higher shall be used for compressing grayscale fingerprint data at 500 ppi class with a platen area of 2 inches or greater in height. WSQ shall not be used for other than the 500 ppi class.2M14.999-DATA WSQ VersionIF {14.011} EQ ASCII(WSQ20) THEN
{Encoder Version } EQ 2
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
IDAT,
IEND)
2M14.999-DATA WSQ ValidIF {14.999} EQ ASCII(WSQ20) THEN Present(SOI-WSQ,SOF-WSQ,SOB-WSQ,EOI-WSQ)t-11B
Field: 14.999-Image WSQ Version 3.17.7.9.1高さ 2 インチ以上のプラテン領域を持つ 500 ppi クラスのグレースケール指紋データの圧縮には、バージョン 3.1 以上のみを使用しなければなりません。WSQ を 500 ppi クラス以外に使用してはなりません。2M14.999-DATA WSQ VersionIF {14.011} EQ ASCII(WSQ20) THEN
{Encoder Version } EQ 2
t-11B

Table C.14 - Assertions for Record Type 15 - Palm Print Image Record

表 C.14 - Record Type 15(掌紋画像レコード)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.15: Record Type-15: Palm print image record
Record: Type15-Palm Print Image8.15The Type-15 record shall contain and be used to exchange palm print image data together with fixed and user-defined textual information fields pertinent to the digitized image.
The image data shall be acquired directly from a subject using a live-scan device, a palmprint card, or other media that contains the subject using a live-scan device, aag
3MType15-Palm Print Image<Not Tested. It is not feasible to test if the image represents a palm print or how the image was captured.>t-1B
Record: Type15-Palm Print Area8.15Any method used to acquire the palm print images shall be capable of capturing a set of images for each hand. This set may include the writerl be capable of capturing a set of3MType15-Palm Print Area<Not Tested. It is not feasible to test which area of the palm is represented in the image.>t-1B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.15: Record Type-15: 掌紋画像レコード
Record: Type15-Palm Print Image8.15Type-15 レコードは、デジタル化された画像に関連する固定のテキスト情報フィールドおよびユーザー定義のテキスト情報フィールドとともに、掌紋画像データを含み、その交換に使用されなければなりません。
画像データは、ライブスキャン装置、掌紋カード、または被験者を含むその他の媒体を使用して、被験者から直接取得されなければなりません。
3MType15-Palm Print Image<試験しません。画像が掌紋を表しているかどうか、または画像がどのように採取されたかを試験することは実現可能ではありません。>t-1B
Record: Type15-Palm Print Area8.15掌紋画像を取得するために使用する方法は、各手について一組の画像を採取できなければなりません。この組には、writer… を含めてもよいです。3MType15-Palm Print Area<試験しません。掌のどの領域が画像に表されているかを試験することは実現可能ではありません。>t-1B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
and the entire area of the full palm extending from the wrist bracelet to the tips of the fingers as one or two scanned images. (See Figure 1)
If two images are used to represent the full palm, the lower image shall extend from the wrist bracelet to the top of the interdigital area (third finger joint) and shall include the thenar, and hypothenar areas of the palm. The upper image shall extend from the bottom of the interdigital area to the upper tips of the fingers. This provides an adequate amount of overlap between the two images.
Field: Type15-Subfield OccurenceTable 69<Table 69 specifies which fields contain subfields as well as the number of occurrences permitted.>1-Type15-Subfields ZeroCount(Subfields in 15.[001 to 003, 005 to 013, 016, 017, 020, 030, 903, 996, 999]) EQ 0T
1M15.004-SubfieldsCount(US_Subfields in 15.004) EQ 1 OR 2T
1O15.024-SubfieldsCount(RS_Subfields in 15.024) MO [1 to 9]
AND
ForEach(RS_Subfield in 15.024)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
O15.902-SubfieldsCount(RS_Subfields in 15.902) GTE 1
AND
ForEach(RS_Subfield in 15.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O15.904-SubfieldsCount(US_Subfields in 15.904) EQ 3T
1O15.995-SubfieldsCount(RS_Subfields in 15.995) MO [1 to 255]
AND
ForEach(RS_Subfield in 15.995)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
および、手首の腕輪の位置から指先までの掌全体の領域を、1 枚または 2 枚のスキャン画像として含みます。(図 1 を参照)
掌全体を 2 枚の画像で表す場合、下側の画像は手首の腕輪の位置から指間部(第 3 指関節)の上部まで及び、掌の母指球領域と小指球領域を含まなければなりません。上側の画像は、指間部の下部から指の先端上部まで及ばなければなりません。これにより、2 枚の画像の間に十分な重なりが得られます。
Field: Type15-Subfield OccurenceTable 69<表 69 は、どのフィールドがサブフィールドを含むか、および許容される出現回数を規定しています。>1-Type15-Subfields ZeroCount(Subfields in 15.[001 to 003, 005 to 013, 016, 017, 020, 030, 903, 996, 999]) EQ 0T
1M15.004-SubfieldsCount(US_Subfields in 15.004) EQ 1 OR 2T
1O15.024-SubfieldsCount(RS_Subfields in 15.024) MO [1 to 9]
AND
ForEach(RS_Subfield in 15.024)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
O15.902-SubfieldsCount(RS_Subfields in 15.902) GTE 1
AND
ForEach(RS_Subfield in 15.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O15.904-SubfieldsCount(US_Subfields in 15.904) EQ 3T
1O15.995-SubfieldsCount(RS_Subfields in 15.995) MO [1 to 255]
AND
ForEach(RS_Subfield in 15.995)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
}
1O15.997-SubfieldsCount(RS_Subfields in 15.997) MO [1 to 255]
AND
ForEach(RS_Subfield in 15.997)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
O15.998-Subfields<See Requirement ID: “Field: Geographic-Conditional”>t-2
Field: Type15-CondCodeTable 69<Table 69 specifies the Condition Code for each field.>1-Type15-CondCodePresent(15.001 to 15.013, 15.999)
AND
NOT Present(15.014, 15.015, 15.018, 15.019, 15.021 to 15.023, 15.025 to 15.029, 15.031 to 15.199, 15.901, 15.905 to 15.994)
B
Field: Type15-CharType8.15, Table 69<Table 69 specifies the Character Type for each field that contains no subfields.>1-Type15-CharType NBytes(15.[001 to 003, 005 to 010, 012, 013, 016, 017]) MO [0x30 to 0x39]B
1-Type15-CharType ABytes(15.030) [0x41 to 0x5A, 0x61 to 0x7A]B
1-Type15-CharType UPresent(Bytes(15. 020))B
1M15.011-CharType ANBytes(15.011) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]B
1O15.025-CharType NSBytes(15.025) MO [0x1E, 0x1F, 0x30 to 0x39]B
1O15.903-CharType Text ANSBytes{15.903} MO [0x20, 0x7E]B
1O15.996-CharType HBytes(10.996) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]B
Field: Type15-Subfield CharType8.15, Table 69<Table 69 specifies the Character Type for each subfield.>1M15.004-Subfield CharType UPresent( Bytes( US_Subfields:1,2 in 15.004 )B*
1O15.024-Subfield CharType HNForEach(RS_Subfield in 15.024)
{
Bytes(US_Subfields:1,2,4 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:3 in RS_Subfield)) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
}
1O15.997-SubfieldsCount(RS_Subfields in 15.997) MO [1 to 255]
AND
ForEach(RS_Subfield in 15.997)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
O15.998-Subfields<要件 ID: “Field: Geographic-Conditional” を参照してください。>t-2
Field: Type15-CondCodeTable 69<表 69 は、各フィールドの条件コードを規定しています。>1-Type15-CondCodePresent(15.001 to 15.013, 15.999)
AND
NOT Present(15.014, 15.015, 15.018, 15.019, 15.021 to 15.023, 15.025 to 15.029, 15.031 to 15.199, 15.901, 15.905 to 15.994)
B
Field: Type15-CharType8.15, Table 69<表 69 は、サブフィールドを含まない各フィールドの文字種別を規定しています。>1-Type15-CharType NBytes(15.[001 to 003, 005 to 010, 012, 013, 016, 017]) MO [0x30 to 0x39]B
1-Type15-CharType ABytes(15.030) [0x41 to 0x5A, 0x61 to 0x7A]B
1-Type15-CharType UPresent(Bytes(15. 020))B
1M15.011-CharType ANBytes(15.011) MO [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]B
1O15.025-CharType NSBytes(15.025) MO [0x1E, 0x1F, 0x30 to 0x39]B
1O15.903-CharType Text ANSBytes{15.903} MO [0x20, 0x7E]B
1O15.996-CharType HBytes(10.996) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]B
Field: Type15-Subfield CharType8.15, Table 69<表 69 は、各サブフィールドの文字種別を規定しています。>1M15.004-Subfield CharType UPresent( Bytes( US_Subfields:1,2 in 15.004 )B*
1O15.024-Subfield CharType HNForEach(RS_Subfield in 15.024)
{
Bytes(US_Subfields:1,2,4 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:3 in RS_Subfield)) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
}
1O15.902-Subfield CharType ANUForEach(RS_Subfield in 15.902)
{
Present(Bytes(US_Subfields:2 to 4 in RS_Subfield))
AND
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39,0x5A]
}
B*
1O15.904-Subfield CharType UPresent(Bytes(All(US_Subfields in 15.904)))B*
1O15.995-Subfield CharType NBytes(All(US_Subfields:1,2 in 15.995)) MO [0x30 to 0x39]B*
1O15.997-Subfield CharType NBytes(All(US_Subfields:1,2 in 15.997)) MO [0x30 to 0x39]B*
O15.998-Subfield CharType ANSU<See Requirement ID: “Field: Geographic”>t-2
Field: Type15-CharCountTable 69<Table 69 specifies the Character Count for each field that contains no subfields.>1M15.001-CharCountDataLength(15.001) GTE 1B
1M15.002-CharCountDataLength(15.002) EQ 1 OR 2B
1M15.003-CharCountDataLength(15.003) EQ 2B
1M15.005-CharCountDataLength(15.005) EQ 8B
1M15.006-CharCountDataLength(15.006) MO [2 to 5]B
1M15.007-CharCountDataLength(15.007) MO [2 to 5]B
1M15.008-CharCountDataLength(15.008) EQ 1B
1M15.009-CharCountDataLength(15.009) MO [1 to 5]B
1M15.010-CharCountDataLength(15.010) MO [1 to 5]B
1M15.011-CharCountDataLength(15.011) MO [3 to 5]B
1M15.012-CharCountDataLength(15.012) EQ 1 OR 2B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
}
1O15.902-Subfield CharType ANUForEach(RS_Subfield in 15.902)
{
Present(Bytes(US_Subfields:2 to 4 in RS_Subfield))
AND
Bytes(US_Subfield:1 in RS_Subfield) MO [0x30 to 0x39,0x5A]
}
B*
1O15.904-Subfield CharType UPresent(Bytes(All(US_Subfields in 15.904)))B*
1O15.995-Subfield CharType NBytes(All(US_Subfields:1,2 in 15.995)) MO [0x30 to 0x39]B*
1O15.997-Subfield CharType NBytes(All(US_Subfields:1,2 in 15.997)) MO [0x30 to 0x39]B*
O15.998-Subfield CharType ANSU<要件 ID: “Field: Geographic” を参照してください。>t-2
Field: Type15-CharCountTable 69<表 69 は、サブフィールドを含まない各フィールドの文字数を規定しています。>1M15.001-CharCountDataLength(15.001) GTE 1B
1M15.002-CharCountDataLength(15.002) EQ 1 OR 2B
1M15.003-CharCountDataLength(15.003) EQ 2B
1M15.005-CharCountDataLength(15.005) EQ 8B
1M15.006-CharCountDataLength(15.006) MO [2 to 5]B
1M15.007-CharCountDataLength(15.007) MO [2 to 5]B
1M15.008-CharCountDataLength(15.008) EQ 1B
1M15.009-CharCountDataLength(15.009) MO [1 to 5]B
1M15.010-CharCountDataLength(15.010) MO [1 to 5]B
1M15.011-CharCountDataLength(15.011) MO [3 to 5]B
1M15.012-CharCountDataLength(15.012) EQ 1 OR 2B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1M15.013-CharCountDataLength(15.013) EQ 2B
1O15.016-CharCountDataLength(15.016) MO [1 to 4]B
1O15.017-CharCountDataLength(15.017) MO [1 to 4]B
1O15.020-CharCountDataLength(15.020) MO [1 to 126]B
1O15.030-CharCountDataLength(15.030) MO [8 to 10]B
1O15.903-CharCountDataLength(15.903) MO [13 to 16]B
1O15.996-CharCountDataLength(15.995) EQ 64B
1M15.999-CharCountDataLength(15.999) GTE 1B
Field: Type15-Subfield CharCountTable 69<Table 69 specifies the Character Count for each subfield.>1M15.004-Subfield CharCountLength(All(US_Subfields in 15.004)) GTE 1B*
1O15.024-Subfield CharCountForEach(RS_Subfield in 15.024)
{
Length(US_Subfield:1 in RS_Subfield)) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield)) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield)) EQ 4
AND
Length(US_Subfields:4 in RS_Subfield)) MO [1 to 5]
}
B*
1O15.902-Subfield CharCountForEach(RS_Subfield in 15.902)
{
Length(US_Subfield:1 in RS_Subfield) EQ 15
AND
Length(US_Subfields:2,3 in RS_Subfield) MO [1 to 64]
AND
Length(US_Subfield:4 in RS_Subfield)) MO [1 to 255]
}
B*
1O15.904-Subfield CharCountLength(All(US_Subfields in 15.904)) MO [1 to 50]B*
1O15.995-ForEach(RS_Subfield in 15.995)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1M15.013-CharCountDataLength(15.013) EQ 2B
1O15.016-CharCountDataLength(15.016) MO [1 to 4]B
1O15.017-CharCountDataLength(15.017) MO [1 to 4]B
1O15.020-CharCountDataLength(15.020) MO [1 to 126]B
1O15.030-CharCountDataLength(15.030) MO [8 to 10]B
1O15.903-CharCountDataLength(15.903) MO [13 to 16]B
1O15.996-CharCountDataLength(15.995) EQ 64B
1M15.999-CharCountDataLength(15.999) GTE 1B
Field: Type15-Subfield CharCountTable 69<表 69 は、各サブフィールドの文字数を規定しています。>1M15.004-Subfield CharCountLength(All(US_Subfields in 15.004)) GTE 1B*
1O15.024-Subfield CharCountForEach(RS_Subfield in 15.024)
{
Length(US_Subfield:1 in RS_Subfield)) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield)) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield)) EQ 4
AND
Length(US_Subfields:4 in RS_Subfield)) MO [1 to 5]
}
B*
1O15.902-Subfield CharCountForEach(RS_Subfield in 15.902)
{
Length(US_Subfield:1 in RS_Subfield) EQ 15
AND
Length(US_Subfields:2,3 in RS_Subfield) MO [1 to 64]
AND
Length(US_Subfield:4 in RS_Subfield)) MO [1 to 255]
}
B*
1O15.904-Subfield CharCountLength(All(US_Subfields in 15.904)) MO [1 to 50]B*
1O15.995-ForEach(RS_Subfield in 15.995)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Subfield CharCount{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
1O15.997-Subfield CharCountForEach(RS_Subfield in 15.997)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
O15.998-Subfield CharCount<See Requirement ID: “Field: Geographic”>t-2
Field: Type15-Field OccurrenceTable 69<Table 69 specifies the Field Occurrence for each field.>1-Type15-Occurrence ZeroCount(15.[014, 015, 018, 019, 021 to 023, 025 to 029, 031 to 199,901,905 to 994]) EQ 0B
1MType15-Occurrence OneCount(15.[001 to 013, 999]) EQ 1B
1-Type15-Occurrence One or FewerCount(15.[016, 017, 020, 024, 030, 902 to 904, 995 to 998) LTE 1B
Field: 15.001-Record Header Value8.15.1, Table 69, 7.1Field 15.001 Record header. In Traditional encoding, this field contains the record length in bytes (including all information separators)M15.001-Record Header<See Requirement ID “Field: xx.001-Record Header”>t-2
8.15.1, C.10.13The XML name for the Type-15 record is <itl:PackagePalmpprintImageRecord>, and its <biom:RecordCategoryCode> element shall have a value of “15”.1MNIEM-15.001-Record HeaderForEach(XElm(itl:PackagePalmprintImageRecord)
{
{XElm(biom:RecordCategoryCode) EQ ASCII(15)
}
X
Field: 15.002-Information Designation Character Value8.15.2, Table 69, 7.3.1This mandatory field shall be the IDC of this Type-15 record as found in the information item IDC of Field 1.003 Transaction content/CNT.M15.002-IDC<See Requirement IDs “Field: xx.002-IDC “and “Field: 1.003-Transaction Content Subfield 2 IDC Matches” >t-2
Field: 15.003-Impression Type Value8.15.3, Table 69, 7.7.4.1, Table 5This mandatory field shall indicate the manner by which the latent print was obtained.
See Section 7.7.4.1 for details.
<Table 69 lists the valid values for IMP.>
1M15.003-IMP{15.003} EQ 10 OR 11B
Field:8.15.4,This is a mandatory field. See Section 7.6M15.004-<See Requirement ID “Field: Agency Codes” >t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Subfield CharCount{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
1O15.997-Subfield CharCountForEach(RS_Subfield in 15.997)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3]
AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
O15.998-Subfield CharCount<要件 ID: “Field: Geographic” を参照してください。>t-2
Field: Type15-Field OccurrenceTable 69<表 69 は、各フィールドの出現回数を規定しています。>1-Type15-Occurrence ZeroCount(15.[014, 015, 018, 019, 021 to 023, 025 to 029, 031 to 199,901,905 to 994]) EQ 0B
1MType15-Occurrence OneCount(15.[001 to 013, 999]) EQ 1B
1-Type15-Occurrence One or FewerCount(15.[016, 017, 020, 024, 030, 902 to 904, 995 to 998) LTE 1B
Field: 15.001-Record Header Value8.15.1, Table 69, 7.1Field 15.001 Record header。Traditional エンコーディングでは、このフィールドは、すべての情報セパレーターを含むレコード長をバイト単位で保持しますM15.001-Record Header<要件 ID: “Field: xx.001-Record Header” を参照してください。>t-2
8.15.1, C.10.13Type-15 レコードの XML 名は <itl:PackagePalmpprintImageRecord> で、その <biom:RecordCategoryCode> 要素の値は「15」でなければなりません。1MNIEM-15.001-Record HeaderForEach(XElm(itl:PackagePalmprintImageRecord)
{
{XElm(biom:RecordCategoryCode) EQ ASCII(15)
}
X
Field: 15.002-Information Designation Character Value8.15.2, Table 69, 7.3.1この必須フィールドは、Field 1.003 Transaction content/CNT の情報項目 IDC にある、この Type-15 レコードの IDC でなければなりません。M15.002-IDC<要件 ID: “Field: xx.002-IDC “and “Field: 1.003-Transaction Content Subfield 2 IDC Matches” を参照してください。>t-2
Field: 15.003-Impression Type Value8.15.3, Table 69, 7.7.4.1, Table 5この必須フィールドは、遺留指紋が採取された方法を示さなければなりません。
詳細は 7.7.4.1 節を参照してください。
<表 69 は IMP の有効な値を列挙しています。>
1M15.003-IMP{15.003} EQ 10 OR 11B
Field:8.15.4,これは必須のフィールドです。7.6 節を参照してください。M15.004-<要件 ID: “Field: Agency Codes” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
15.004-Originating Agency Value7.6for details.ORG
Field: 15.005-Palmprint Capture Date Value8.15.5, 7.7.2.3This mandatory field shall contain the date that the fingerprint data contained in the record was captured.1M15.005-PCD{15.005} MO [ValidLocalDate]t-6T
1MNIEM-15.005-PCDForEach(XElm(itl:PackagePalmprintRecord))
{
{XElm(nc:Date) in XElm(biom:CaptureDate)} MO [NIEM-ValidLocalDate]
}
t-6X
Field: 15.006-Horizontal Line Length Value8.15.6, Table 69, 7.7.8.1The maximum horizontal size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types. The minimum value is 10 pixels.M15.006-HLL<See Requirement ID “Field: Image HLL Value” >t-2
Field: 15.006-Horizontal Line Length Metadata8.15.6, Table 69, 7.7.8.1<The HLL is verified by checking the image metadata if compression is used.>2M15.006-HLL Metadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{15.006} EQ {ImageWidth-JPEGB,JPEGL}
t-11B
2M15.006-HLL Metadata JP2,JP2LIF {15.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {15.006} EQ {ImageWidth-JP2,JP2L}t-11B
2M15.006-HLL Metadata PNGIF {15.011} EQ ASCII(PNG) THEN
{15.006} EQ {ImageWidth-PNG}
t-11B
2M15.006-HLL Metadata WSQIF {15.011} EQ ASCII(WSQ20) THEN
{15.006} EQ {ImageWidth-WSQ}
t-11B
Field: 15.007-Vertical Line Length Value8.15.7, Table 69, 7.7.8.2The maximum vertical size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types.
The minimum value is 10 pixels.
M15.007-VLL<See Requirement ID “Field: Image VLL Value” >t-2
Field: 15.007-Vertical Line Length Metadata8.15.7, Table 69, 7.7.8.2<The VLL is verified by checking the image metadata if compression is used.>2M15.007-VLL Metadata JPEGB, JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{15.007} EQ {ImageHeight-JPEGB,JPEGL}
t-11B
2M15.007-VLL Metadata JP2, JP2LIF {15.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {15.007} EQ {ImageHeight-JP2,JP2L}t-11B
2M15.007-VLL Metadata PNGIF {15.011} EQ ASCII(PNG) THEN
{15.007} EQ {ImageHeight-PNG}
t-11B
2M15.006-VLL Metadata WSQIF {15.011} EQ ASCII(WSQ20) THEN
{15.007} EQ {ImageHeight-WSQ}
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
15.004-Originating Agency Value7.6詳細はそちらにあります。ORG
Field: 15.005-Palmprint Capture Date Value8.15.5, 7.7.2.3この必須フィールドは、レコードに含まれる掌紋データが採取された日付を保持しなければなりません。1M15.005-PCD{15.005} MO [ValidLocalDate]t-6T
1MNIEM-15.005-PCDForEach(XElm(itl:PackagePalmprintRecord))
{
{XElm(nc:Date) in XElm(biom:CaptureDate)} MO [NIEM-ValidLocalDate]
}
t-6X
Field: 15.006-Horizontal Line Length Value8.15.6, Table 69, 7.7.8.1水平方向の最大サイズは、Record Types-4 および 8 では 65,534 画素、その他のレコードタイプでは 99,999 に制限されます。最小値は 10 画素です。M15.006-HLL<要件 ID: “Field: Image HLL Value” を参照してください。>t-2
Field: 15.006-Horizontal Line Length Metadata8.15.6, Table 69, 7.7.8.1<HLL は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>2M15.006-HLL Metadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{15.006} EQ {ImageWidth-JPEGB,JPEGL}
t-11B
2M15.006-HLL Metadata JP2,JP2LIF {15.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {15.006} EQ {ImageWidth-JP2,JP2L}t-11B
2M15.006-HLL Metadata PNGIF {15.011} EQ ASCII(PNG) THEN
{15.006} EQ {ImageWidth-PNG}
t-11B
2M15.006-HLL Metadata WSQIF {15.011} EQ ASCII(WSQ20) THEN
{15.006} EQ {ImageWidth-WSQ}
t-11B
Field: 15.007-Vertical Line Length Value8.15.7, Table 69, 7.7.8.2垂直方向の最大サイズは、Record Types-4 および 8 では 65,534 画素、その他のレコードタイプでは 99,999 に制限されます。
最小値は 10 画素です。
M15.007-VLL<要件 ID: “Field: Image VLL Value” を参照してください。>t-2
Field: 15.007-Vertical Line Length Metadata8.15.7, Table 69, 7.7.8.2<VLL は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>2M15.007-VLL Metadata JPEGB, JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
{15.007} EQ {ImageHeight-JPEGB,JPEGL}
t-11B
2M15.007-VLL Metadata JP2, JP2LIF {15.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {15.007} EQ {ImageHeight-JP2,JP2L}t-11B
2M15.007-VLL Metadata PNGIF {15.011} EQ ASCII(PNG) THEN
{15.007} EQ {ImageHeight-PNG}
t-11B
2M15.006-VLL Metadata WSQIF {15.011} EQ ASCII(WSQ20) THEN
{15.007} EQ {ImageHeight-WSQ}
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Field: 15.008-Scale Units Value8.15.8, Table 69, 7.7.8.3<Table 69 lists the value constraints for SLC>M15.008-SLC<See Requirement ID “Field: Image SLC Value” >t-2
Field: 15.008-Scale Units Metadata8.15.8, Table 69, 7.7.8.3A value of “1” shall indicate pixels per inch.
A value of “2” shall indicate pixels per centimeter. A value of “0” in this field indicates that no scale is provided, and the quotient of THPS/TVPS shall provide the pixel aspect ratio.
<The SLC is verified by checking the image metadata if compression is used.>
2M15.008-SLC Metadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN {15.008} EQ {SamplingUnits-JPEGB,JPEGL}t-11B
15.008-SLC Metadata JP2,JP2L<Not Tested.>t-12B
2M15.008-SLC Metadata PNGIF {15.011} EQ ASCII(PNG) THEN
IF {15.008} EQ 1 OR 2 THEN { SamplingUnits-PNG} EQ 1, ELSE IF {15.008} EQ 0 THEN { SamplingUnits-PNG} EQ 0
t-11B
15.008-SLC Metadata WSQ<Not Tested.>t-12B
Field: 15.009-Transmitted Horizontal Pixel Scale Value8.15.9, Table 69, 7.7.8.4<Table 69 lists the value constraints for THPS.>M15.009-THPS<See Requirement ID “Field: Image THPS Value” >t-2
Field: 15.009-Transmitted Horizontal Pixel Scale Metadata8.15.9, Table 69, 7.7.8.4This is the integer pixel density used in the horizontal direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the horizontal component of the pixel aspect ratio, up to 5 digits.
<The THPS is verified by checking the image metadata if compression is used.>
2M15.009-THPS Metadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {15.008} EQ 1 OR 2
THEN {15.009} EQ {HorizontalDensity-JPEGB,JPEGL}
t-11B
15.009-THPS Metadata JP2, JP2L<Not Tested.>t-12B
2M15.009-THPS Metadata PNGIF {15.011} EQ ASCII(PNG) AND {15.008} EQ 1 THEN {15.009} EQ {HorizontalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {15.011} EQ ASCII(PNG) AND {15.008} EQ 2
THEN {15.009} EQ {HorizontalDensity-PNG} * 0.01 (meters/cm)
t-11B
15.009-THPS Metadata WSQ<Not Tested.>t-12B
2M15.009-THPSIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {15.008} NEQ 1 OR 2t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Field: 15.008-Scale Units Value8.15.8, Table 69, 7.7.8.3<表 69 は SLC の値の制約を列挙しています。>M15.008-SLC<要件 ID: “Field: Image SLC Value” を参照してください。>t-2
Field: 15.008-Scale Units Metadata8.15.8, Table 69, 7.7.8.3値「1」は、インチあたりの画素数を示さなければなりません。
値「2」は、センチメートルあたりの画素数を示さなければなりません。このフィールドの値「0」は、縮尺が与えられていないことを示し、THPS/TVPS の商が画素アスペクト比を与えなければなりません。
<SLC は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
2M15.008-SLC Metadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN {15.008} EQ {SamplingUnits-JPEGB,JPEGL}t-11B
15.008-SLC Metadata JP2,JP2L<試験されていません。>t-12B
2M15.008-SLC Metadata PNGIF {15.011} EQ ASCII(PNG) THEN
IF {15.008} EQ 1 OR 2 THEN { SamplingUnits-PNG} EQ 1, ELSE IF {15.008} EQ 0 THEN {SamplingUnits-PNG} EQ 0
t-11B
15.008-SLC Metadata WSQ<試験されていません。>t-12B
Field: 15.009-Transmitted Horizontal Pixel Scale Value8.15.9, Table 69, 7.7.8.4<表 69 は THPS の値の制約を列挙しています。>M15.009-THPS<要件 ID: “Field: Image THPS Value” を参照してください。>t-2
Field: 15.009-Transmitted Horizontal Pixel Scale Metadata8.15.9, Table 69, 7.7.8.4これは、SLC の値が「1」または「2」の場合に画像の水平方向で使用される整数の画素密度です。SLC の値が「0」の場合、この情報項目は、画素アスペクト比の水平成分を最大 5 桁で保持しなければなりません。
<THPS は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
2M15.009-THPS Metadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {15.008} EQ 1 OR 2
THEN {15.009} EQ {HorizontalDensity-JPEGB,JPEGL}
t-11B
15.009-THPS Metadata JP2, JP2L<試験されていません。>t-12B
2M15.009-THPS Metadata PNGIF {15.011} EQ ASCII(PNG) AND {15.008} EQ 1 THEN {15.009} EQ {HorizontalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {15.011} EQ ASCII(PNG) AND {15.008} EQ 2
THEN {15.009} EQ {HorizontalDensity-PNG} * 0.01 (meters/cm)
t-11B
15.009-THPS Metadata WSQ<試験されていません。>t-12B
2M15.009-THPSIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {15.008} NEQ 1 OR 2t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Aspect Ratio Metadata JPEGB,JPEGLTHEN {15.009}/{15.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
15.009-THPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M15.009-THPS Aspect Ratio Metadata PNGIF {15.011} EQ ASCII(PNG) AND {15.008} NEQ 1 OR 2
THEN {15.009}/{15.010} EQ {HorizontalDensity-PNG} / {VerticalDensity-PNG}
t-11B
15.009-THPS Aspect Ratio Metadata WSQ<Not Tested.>t-12B
Field: 15.010-Transmitted Vertical Pixel Scale Value8.15.10, Table 69, 7.7.8.5<Table 69 lists the value constraints for TVPS.>M15.010-TVPS<See Requirement ID “Field: Image TVPS Value” >t-2
Field: 15.010-Transmitted Vertical Pixel Scale Metadata8.15.10, Table 69, 7.7.8.5This is the integer pixel density used in the Vertical direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the Vertical component of the pixel aspect ratio, up to 5 digits.
<The TVPS is verified by checking the image metadata if compression is used.>
2M15.010-TVPS Metadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {15.008} EQ 1 OR 2
THEN {15.010} EQ {VerticalDensity-JPEGB,JPEGL}
t-11B
15.010-TVPS Metadata JP2, JP2L<Not Tested.>t-12B
2M15.010-TVPS Metadata PNGIF {15.011} EQ ASCII(PNG) AND {15.008} EQ 1
THEN {15.010} EQ {VerticalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {15.011} EQ ASCII(PNG) AND {15.008} EQ 2
THEN {15.010} EQ {VerticalDensity-PNG} * 0.01 (meters/cm)
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Aspect Ratio Metadata JPEGB,JPEGLTHEN {15.009}/{15.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
15.009-THPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M15.009-THPS Aspect Ratio Metadata PNGIF {15.011} EQ ASCII(PNG) AND {15.008} NEQ 1 OR 2
THEN {15.009}/{15.010} EQ {HorizontalDensity-PNG} / {VerticalDensity-PNG}
t-11B
15.009-THPS Aspect Ratio Metadata WSQ<Not Tested.>t-12B
Field: 15.010-Transmitted Vertical Pixel Scale Value8.15.10, Table 69, 7.7.8.5<表 69 は TVPS の値の制約を列挙しています。>M15.010-TVPS<要件 ID: “Field: Image TVPS Value” を参照してください。>t-2
Field: 15.010-Transmitted Vertical Pixel Scale Metadata8.15.10, Table 69, 7.7.8.5これは、SLC の値が「1」または「2」の場合に画像の垂直方向で使用される整数の画素密度です。SLC の値が「0」の場合、この情報項目は、画素アスペクト比の垂直成分を最大 5 桁で保持しなければなりません。
<TVPS は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
2M15.010-TVPS Metadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {15.008} EQ 1 OR 2
THEN {15.010} EQ {VerticalDensity-JPEGB,JPEGL}
t-11B
15.010-TVPS Metadata JP2, JP2L<Not Tested.>t-12B
2M15.010-TVPS Metadata PNGIF {15.011} EQ ASCII(PNG) AND {15.008} EQ 1
THEN {15.010} EQ {VerticalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {15.011} EQ ASCII(PNG) AND {15.008} EQ 2
THEN {15.010} EQ {VerticalDensity-PNG} * 0.01 (meters/cm)
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
15.010-TVPS Metadata WSQ<Not Tested.>t-12B
2M15.010-TVPS Aspect Ratio Metadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {15.008} NEQ 1 OR 2
THEN {15.009}/{15.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
15.010-TVPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M15.010-TVPS Aspect Ratio Metadata PNGIF {15.011} EQ ASCII(PNG) AND {15.008} NEQ 1 OR 2
THEN {15.009}/{15.010} EQ { HorizontalDensity - PNG} / {VerticalDensity-PNG}
t-11B
15.010-TVPS Aspect Ratio Metadata WSQ<Not Tested.>t-12B
Field: 15.011-Compression Algorithm Value8.15.11, Table 69, 7.7.9.1For each of these fields, the entry corresponds to the appropriate Label entry in Table 12: Field 15.011: Compression algorithm / CGA.1M15.011-CGA{15.011} MO [ASCII(NONE, JPEGB, JPEGL, JP2, JP2L, PNG, WSQ)]t-98B
Field: 15.011-Compression Algorithm Metadata8.15.11, Table 69<The CGA is verified by checking the image metadata for the compression type signature if compression is used.>2M15.011-CGAMetadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(SOI -JPEG,JPEGL)
t-11B
2M15.011-CGA Metadata JP2, JP2LIF {15.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox)t-11B
2M15.011-CGA Metadata PNGIF {15.011} EQ ASCII(PNG) THEN
Present(PNGSig)
t-11B
2M15.011-CGAIF {15.011} EQ ASCII(WSQ20) THENt-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
15.010-TVPS Metadata WSQ<試験されていません。>t-12B
2M15.010-TVPS Aspect Ratio Metadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) AND {15.008} NEQ 1 OR 2
THEN {15.009}/{15.010} EQ {HorizontalDensity-JPEGB,JPEGL} / {VerticalDensity-JPEGB,JPEGL}
t-11B
15.010-TVPS Aspect Ratio Metadata JP2, JP2L<試験されていません。>t-12B
2M15.010-TVPS Aspect Ratio Metadata PNGIF {15.011} EQ ASCII(PNG) AND {15.008} NEQ 1 OR 2
THEN {15.009}/{15.010} EQ { HorizontalDensity - PNG} / {VerticalDensity-PNG}
t-11B
15.010-TVPS Aspect Ratio Metadata WSQ<試験されていません。>t-12B
Field: 15.011-Compression Algorithm Value8.15.11, Table 69, 7.7.9.1これらの各フィールドでは、エントリーは表 12: Field 15.011: Compression algorithm / CGA の該当する Label エントリーに対応します。1M15.011-CGA{15.011} MO [ASCII(NONE, JPEGB, JPEGL, JP2, JP2L, PNG, WSQ)]t-98B
Field: 15.011-Compression Algorithm Metadata8.15.11, Table 69<CGA は、圧縮が使用されている場合、画像メタデータの圧縮タイプのシグネチャを確認することで検証されます。>2M15.011-CGAMetadata JPEGB,JPEGLIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(SOI -JPEG,JPEGL)
t-11B
2M15.011-CGA Metadata JP2, JP2LIF {15.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox)t-11B
2M15.011-CGA Metadata PNGIF {15.011} EQ ASCII(PNG) THEN
Present(PNGSig)
t-11B
2M15.011-CGAIF {15.011} EQ ASCII(WSQ20) THENt-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Metadata WSQPresent(SOI-WSQ)
Field: 15.012-Bits Per Pixel Value8.15.12, Table 69, 7.7.8.6This field shall contain an entry of “8” for normal grayscale values of “0” to “255”. Any entry in this field greater than “8” shall represent a grayscale pixel with increased proportion.M15.012-BPX<See Requirement ID “Field: Image BPX Value” >t-2
Field: 15.012- Bits Per Pixel Metadata8.15.12, Table 69<The BPX is verified by checking the image metadata for the compression type signature if compression is used.>2M15.012-BPX Metadata JPEGB,JPEGL{15.012} EQ {BPX-JPEG, JPEGL}t-11B
2M15.012-BPX Metadata JP2, JP2L{15.012} EQ {BPX-JP2,JP2L}t-11B
2M15.012-BPX Metadata PNG{15.012} EQ {BPX-PNG}t-11B
15.012-BPX Metadata WSQ<Not Tested.>t-12B
Field: 15.013-Friction Ridge Generalized Position Value8.15.13, Table 69, 7.7.4.2, Table 6See Section 7.7.4.2 for details.1M15.013-FGP Value{15.013} MO [20 to 38, 81 to 84]B
Field: 15.014, 15.015-ReservedTable 69Reserved for future useonly by ANSI/NIST-ITL.-15.014, 15.015 Reserved<See Requirement ID: “Field: Type15-CondCode>.t-2
Field: 15.016-Scanned Horizontal Pixel Scale Value8.15.14, Table 69, 7.7.8.7See section 7.7.8 for details.O15.016-SHPS Value<See Requirement IDs: “Field: Image SHPS Value”>t-2
Field: 15.017-Scanned Vertical Pixel Scale Value8.15.15, Table 69, 7.7.8.8See section 7.7.8 for details.O15.016-SVPS Value<See Requirement IDs: “Field: Image SVPS Value”>t-2
Field: 15.018, 15.019-Table 69Reserved for future useonly by ANSI/NIST-ITL.-15.018, 15.019 Reserved<See Requirement ID: “Field: Type15-CondCode>.t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Metadata WSQPresent(SOI-WSQ)
Field: 15.012-Bits Per Pixel Value8.15.12, Table 69, 7.7.8.6このフィールドには、グレースケール値「0」〜「255」の通常の場合は「8」を入力しなければなりません。このフィールドで「8」より大きい値は、画素の比率が高められたグレースケール画素を表さなければなりません。M15.012-BPX<要件 ID: “Field: Image BPX Value” を参照してください。>t-2
Field: 15.012- Bits Per Pixel Metadata8.15.12, Table 69<BPX は、圧縮が使用されている場合、画像メタデータの圧縮タイプのシグネチャを確認することで検証されます。>2M15.012-BPX Metadata JPEGB,JPEGL{15.012} EQ {BPX-JPEG, JPEGL}t-11B
2M15.012-BPX Metadata JP2, JP2L{15.012} EQ {BPX-JP2,JP2L}t-11B
2M15.012-BPX Metadata PNG{15.012} EQ {BPX-PNG}t-11B
15.012-BPX Metadata WSQ<試験されていません。>t-12B
Field: 15.013-Friction Ridge Generalized Position Value8.15.13, Table 69, 7.7.4.2, Table 6詳細は 7.7.4.2 節を参照してください。1M15.013-FGP Value{15.013} MO [20 to 38, 81 to 84]B
Field: 15.014, 15.015-ReservedTable 69ANSI/NIST-ITL のみによる将来の使用のために予約されています。-15.014, 15.015 Reserved<要件 ID: “Field: Type15-CondCode” を参照してください。>t-2
Field: 15.016-Scanned Horizontal Pixel Scale Value8.15.14, Table 69, 7.7.8.7詳細は 7.7.8 節を参照してください。O15.016-SHPS Value<要件 ID: “Field: Image SHPS Value” を参照してください。>t-2
Field: 15.017-Scanned Vertical Pixel Scale Value8.15.15, Table 69, 7.7.8.8詳細は 7.7.8 節を参照してください。O15.016-SVPS Value<要件 ID: “Field: Image SVPS Value” を参照してください。>t-2
Field: 15.018, 15.019-Table 69ANSI/NIST-ITL のみによる将来の使用のために予約されています。-15.018, 15.019 Reserved<要件 ID: “Field: Type15-CondCode” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Reserved
Field: 15.020-Comment Value8.15.16, Table 69, 7.4.4See section 7.4.4 for details.O15.020-COM<See Requirement ID: “Field: Comment>.t-2
Field: 15.021 to 15.023-ReservedTable 69Reserved for future useonly by ANSI/NIST-ITL.-15.021 to 15.023 Reserved<See Requirement ID: “Field: Type15-CondCode>.t-2
Field: 15.024-Palm Quality Metric Value8.15.17, Table 69, Table 6<Table 69 lists the value constraints for PQM.>O15.024-PQM<See Requirement IDs: “Field: Sample Quality Occurrences”, to “Field: Sample Quality Additional Subfield”.>t-2
Field: 15.025 to 15.029-ReservedTable 69Reserved for future useonly by ANSI/NIST-ITL.-15.025 to 15.029 Reserved<See Requirement ID: “Field: Type15-CondCode>.t-2
Field: 15.030-Device Monitoring Mode Value8.15.27, Table 69<Table 69 lists the value constraints for DMM.>1O15.030-DMM{15.030} MO ASCII(CONTROLLED, ASSISTED, OBSERVED, UNATTENDED, UNKNOWN)B
Field: 15.031 to 15.199-ReservedTable 69Reserved for future useonly by ANSI/NIST-ITL.-15.031 to 15.199 Reserved<See Requirement ID: “Field: Type15-CondCode>.t-2
Field: 15.200 to 15.900-User DefinedTable 69User Defined Fields-15.200 to 15.900-User DefinedTRUEB
Field: 15.901-ReservedTable 69Reserved for future useonly by ANSI/NIST-ITL.-15.901-Reserved<See Requirement ID: “Field: Type15-CondCode>.t-2
Field: 15.902-Annotated Information Value8.15.20, Table 69This is an optional field, listing the operations performed on the original source in order to prepare it for inclusion in a biometric record type. See Section 7.4.1.O15.902-ANN-Value<See Requirement ID: “Field: xx.902-ANN” >.t-2
Field: 15.903-Device Unique Identifier Value8.15.31, Table 69This is an optional field. See Section 7.7.1.1.O15.903-DUI Value<See Requirement ID: “Field: Device ID” >.t-2
Field: 15.904-Make/Model/Serial8.15.32, Table 69This is an optional field. See Section 7.7.1.2.O15.904-MMS Value<See Requirement ID: “Field: Make Model” >.t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Reserved
Field: 15.020-Comment Value8.15.16, Table 69, 7.4.4詳細は 7.4.4 節を参照してください。O15.020-COM<要件 ID: “Field: Comment” を参照してください。>t-2
Field: 15.021 to 15.023-ReservedTable 69ANSI/NIST-ITL のみによる将来の使用のために予約されています。-15.021 to 15.023 Reserved<要件 ID: “Field: Type15-CondCode” を参照してください。>t-2
Field: 15.024-Palm Quality Metric Value8.15.17, Table 69, Table 6<表 69 は PQM の値の制約を列挙しています。>O15.024-PQM<要件 ID: “Field: Sample Quality Occurrences” から “Field: Sample Quality Additional Subfield” までを参照してください。>t-2
Field: 15.025 to 15.029-ReservedTable 69ANSI/NIST-ITL のみによる将来の使用のために予約されています。-15.025 to 15.029 Reserved<要件 ID: “Field: Type15-CondCode” を参照してください。>t-2
Field: 15.030-Device Monitoring Mode Value8.15.27, Table 69<表 69 は DMM の値の制約を列挙しています。>1O15.030-DMM{15.030} MO ASCII(CONTROLLED, ASSISTED, OBSERVED, UNATTENDED, UNKNOWN)B
Field: 15.031 to 15.199-ReservedTable 69ANSI/NIST-ITL のみによる将来の使用のために予約されています。-15.031 to 15.199 Reserved<要件 ID: “Field: Type15-CondCode” を参照してください。>t-2
Field: 15.200 to 15.900-User DefinedTable 69User Defined Fields-15.200 to 15.900-User DefinedTRUEB
Field: 15.901-ReservedTable 69ANSI/NIST-ITL のみによる将来の使用のために予約されています。-15.901-Reserved<要件 ID: “Field: Type15-CondCode” を参照してください。>t-2
Field: 15.902-Annotated Information Value8.15.20, Table 69これは任意のフィールドで、生体情報レコードタイプに含めるために元の情報源に対して行われた操作を列挙します。7.4.1 節を参照してください。O15.902-ANN-Value<要件 ID: “Field: xx.902-ANN” を参照してください。>t-2
Field: 15.903-Device Unique Identifier Value8.15.31, Table 69これは任意のフィールドです。7.7.1.1 節を参照してください。O15.903-DUI Value<要件 ID: “Field: Device ID” を参照してください。>t-2
Field: 15.904-Make/Model/Serial8.15.32, Table 69これは任意のフィールドです。7.7.1.2 節を参照してください。O15.904-MMS Value<要件 ID: “Field: Make Model” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Number Value
Field: 15.905, 15.994-ReservedTable 69Reserved for future useonly by ANSI/NIST-ITL.-15.905, 15.994-Reserved<See Requirement ID: “Field: Type15-CondCode>.t-2
Field: 15.995-Associated Context Value8.15.33, Table 69See Section 7.3.3O15.995-ASC Value<See Requirement IDs: “Field: xx.995-ASC” and “Field: xx.995-ASC-ACN” and
“Field: xx.995-ASC-ASP”>.
t-2
Field: 15.996-Hash Value8.15.34, Table 69See Section 7.5.2O15.996-HAS Value<See Requirement ID: “Field: HAS”>t-2
Field: 15.997-Source Representation Value8.15.35, Table 69See Section 7.3.2O15.997-SOR Value<See Requirement IDs: “Field: xx.997-SOR” and “Field: xx.997-SOR-SRN” and
“Field: xx.997-SOR-RSP”>.
t-2
Field: 15.998-Geographic Sample Acquisition Location Value8.15.36, Table 69See Section 7.7.3O15.998-GEO Value<See Requirement IDs: “Field: Geographic”, “Field: Geographic-Conditional”, “Field: Geographic-Subfield 1” through “Field: Geographic-Values-SubField 15” >.t-2
Field: 15.999-Image Data Valid8.15.37, Table 69This is a mandatory field contains the image.
<The image metadata is checked for validity.>
2M15.999-DATA Uncompressed ValidIF {15.011} EQ ASCII(NONE) THEN Length(15.999) EQ 15.006} * {15.007}B
2M15.999-DATA JPEGB,JPEGL ValidIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(JFIF,
SOI-JPEGB,JPEGL,
SOF-JPEGB,JPEGL,
EOI-JPEG, JPEGL)
t-11B
2M15.999-DATA JP2,JP2L ValidIF {15.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox,
HeadBox,
ImgBox)
t-11B
2M15.999-DATA PNG ValidIF {15.011} EQ ASCII(PNG) THEN
Present(PNGSig,
IHDR,
IDAT,
IEND)
t-11B
2M15.999-IF {15.999} EQ ASCII(WSQ20) THENt-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Number Value
Field: 15.905, 15.994-ReservedTable 69ANSI/NIST-ITL のみによる将来の使用のために予約されています。-15.905, 15.994-Reserved<要件 ID: “Field: Type15-CondCode を参照してください。>t-2
Field: 15.995-Associated Context Value8.15.33, Table 697.3.3 節を参照してください。O15.995-ASC Value<要件 ID: “Field: xx.995-ASC” および “Field: xx.995-ASC-ACN” および
“Field: xx.995-ASC-ASP” を参照してください。>
t-2
Field: 15.996-Hash Value8.15.34, Table 697.5.2 節を参照してください。O15.996-HAS Value<要件 ID: “Field: HAS” を参照してください。>t-2
Field: 15.997-Source Representation Value8.15.35, Table 697.3.2 節を参照してください。O15.997-SOR Value<要件 ID: “Field: xx.997-SOR” および “Field: xx.997-SOR-SRN” および
“Field: xx.997-SOR-RSP” を参照してください。>
t-2
Field: 15.998-Geographic Sample Acquisition Location Value8.15.36, Table 697.7.3 節を参照してください。O15.998-GEO Value<要件 ID: “Field: Geographic”, “Field: Geographic-Conditional”, “Field: Geographic-Subfield 1” through “Field: Geographic-Values-SubField 15” を参照してください。>t-2
Field: 15.999-Image Data Valid8.15.37, Table 69これは必須のフィールドで、画像を含みます。
<画像メタデータが有効かどうかを確認します。>
2M15.999-DATA Uncompressed ValidIF {15.011} EQ ASCII(NONE) THEN Length(15.999) EQ 15.006} * {15.007}B
2M15.999-DATA JPEGB,JPEGL ValidIF {15.011} EQ ASCII(JPEGB) OR ASCII(JPEGL) THEN
Present(JFIF,
SOI-JPEGB,JPEGL,
SOF-JPEGB,JPEGL,
EOI-JPEG, JPEGL)
t-11B
2M15.999-DATA JP2,JP2L ValidIF {15.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox,
HeadBox,
ImgBox)
t-11B
2M15.999-DATA PNG ValidIF {15.011} EQ ASCII(PNG) THEN
Present(PNGSig,
IHDR,
IDAT,
IEND)
t-11B
2M15.999-IF {15.999} EQ ASCII(WSQ20) THENt-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
DATA WSQ ValidPresent(SOI-WSQ,SOF-WSQ,SOB-WSQ,EOI-WSQ)
Field: 15.999-Image WSQ Version 3.17.7.9.1Only version 3.1 or higher shall be used for compressing grayscale fingerprint data at 500 ppi class with a platen area of 2 inches or greater in height. WSQ shall not be used for other than the 500 ppi class.2M15.999-DATA WSQ VersionIF {15.011} EQ ASCII(WSQ20) THEN
{Encoder Version } EQ 2
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
DATA WSQ ValidPresent(SOI-WSQ,SOF-WSQ,SOB-WSQ,EOI-WSQ)
Field: 15.999-Image WSQ Version 3.17.7.9.1高さ 2 インチ以上のプラテン領域を持つ 500 ppi クラスのグレースケール指紋データの圧縮には、バージョン 3.1 以上のみを使用しなければなりません。WSQ を 500 ppi クラス以外に使用してはなりません。2M15.999-DATA WSQ VersionIF {15.011} EQ ASCII(WSQ20) THEN
{Encoder Version } EQ 2
t-11B

Table C.15 - Assertions for Record Type 17 - Iris Image Record

表 C.15 - Record Type 17(虹彩画像レコード)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
8.17: Record Type-17: Iris image record
Field: Type17-Subfield OccurrenceTable 71<Table 71 specifies which fields contain subfields as well as the number of occurrences permitted.>1-Type17-Subfields ZeroCount(Subfields in 17.[001 to 003, 005 to 015, 017, 020 to 023, 026, 030 to 032, 040, 041, 996]) EQ 0T
1M17.004-SubfieldsCount(US_Subfields in 17.004) EQ 1 OR 2T
1O17.016-SubfieldsCount(US_Subfields in 17.016) EQ 3T
1O17.019-SubfieldsCount(US_Subfields in 17.019) EQ 3T
1O17.024-SubfieldsCount(RS_Subfields in 17.024) MO [1 to 9]
AND
ForEach(RS_Subfield in 17.024)
{
Count(US_Subfields in RS_Subfield) EQ 3
}
T
1M17.025-SubfieldsIF {US_Subfield:1 in 17.025} EQ ASCII(DEFINED) THEN
Count(US_Subfields in 17.025) EQ 3
ELSE
Count(US_Subfields in 17.025) EQ 1
}
T
1O17.033-SubfieldsCount(US_Subfields in 17.033) EQ 2 + 2*{US_Subfield:2 in 17.033}
}
T
1O17.034-SubfieldsCount(US_Subfields in 17.034) EQ 2 + 2*{US_Subfield:2 in 17.034}
}
T
1O17.035-SubfieldsCount(US_Subfields in 17.035) EQ 2 + 2*{ US_Subfield:2 in 17.035}
}
T
1O17.036-SubfieldsCount(US_Subfields in 17.036) EQ 2 + 2*{ US_Subfield:2 in 17.036}
}
T
1O17.037-Count(US_Subfields in 17.037) EQ 3 +T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
8.17: Record Type-17: 虹彩画像レコード
Field: Type17-Subfield OccurrenceTable 71<表 71 は、どのフィールドがサブフィールドを含むか、および許容される出現回数を規定しています。>1-Type17-Subfields ZeroCount(Subfields in 17.[001 to 003, 005 to 015, 017, 020 to 023, 026, 030 to 032, 040, 041, 996]) EQ 0T
1M17.004-SubfieldsCount(US_Subfields in 17.004) EQ 1 OR 2T
1O17.016-SubfieldsCount(US_Subfields in 17.016) EQ 3T
1O17.019-SubfieldsCount(US_Subfields in 17.019) EQ 3T
1O17.024-SubfieldsCount(RS_Subfields in 17.024) MO [1 to 9]
AND
ForEach(RS_Subfield in 17.024)
{
Count(US_Subfields in RS_Subfield) EQ 3
}
T
1M17.025-SubfieldsIF {US_Subfield:1 in 17.025} EQ ASCII(DEFINED) THEN
Count(US_Subfields in 17.025) EQ 3
ELSE
Count(US_Subfields in 17.025) EQ 1
}
T
1O17.033-SubfieldsCount(US_Subfields in 17.033) EQ 2 + 2*{US_Subfield:2 in 17.033}
}
T
1O17.034-SubfieldsCount(US_Subfields in 17.034) EQ 2 + 2*{US_Subfield:2 in 17.034}
}
T
1O17.035-SubfieldsCount(US_Subfields in 17.035) EQ 2 + 2*{ US_Subfield:2 in 17.035}
}
T
1O17.036-SubfieldsCount(US_Subfields in 17.036) EQ 2 + 2*{ US_Subfield:2 in 17.036}
}
T
1O17.037-Count(US_Subfields in 17.037) EQ 3 +T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Subfields2*{US_Subfield:3 in 17.037)}
}
1O17.902-SubfieldsCount(RS_Subfields in 17.902) GTE 1
AND
ForEach(RS_Subfield in 17.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O17.995-SubfieldsCount(RS_Subfields in 17.995) MO [1 to 255]
AND
ForEach(RS_Subfield in 17.995)
{
Count(US_Subfields in RS_Subfield) EQ 2OR 3
}
T
1O17.997-SubfieldsCount(RS_Subfields in 17.997) MO [1 to 255]
AND
ForEach(RS_Subfield in 17.997)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
O17.998-Subfields<See Requirement ID: “Field: Geographic-Conditional”>t-2
Field: Type17-CondCodeTable 71<Table 71 specifies the Condition Code for each field.>1-Type17-CondCodePresent(17.001 to 17.013, 17.025, 17.032, 17.999)
AND
NOT Present(17.018, 17.027 to 17.029, 17.038, 17.039, 17.042 to 17.199, 17.901, 17.903 to 17.994)
B
Field: 17.015-Rotation Uncertainty DependentTable 71, 8.17.15This field is mandatory if Field 17.014: Rotation angle of eye / RAE is present.2D17.015-CondCode DependentIF Present(17.014) THEN Present(17.015)B
Field: Type17-CharType8.17, Table 71<Table 71 specifies the Character Type for each field that contains no subfields.>1-Type17-CharType NBytes(17.[001,002,003, 005 to 010, 012, 022, 023, 026, 031, 032, 040, 041]) MO [0x30 to 0x39]B
1-Type17-CharType ABytes(17.[013, 020, 030]) MO [0x41 to 0x5A, 0x61 to 0x7A]B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Subfields2*{US_Subfield:3 in 17.037)}
}
1O17.902-SubfieldsCount(RS_Subfields in 17.902) GTE 1
AND
ForEach(RS_Subfield in 17.902)
{
Count(US_Subfields in RS_Subfield) EQ 4
}
T
1O17.995-SubfieldsCount(RS_Subfields in 17.995) MO [1 to 255]
AND
ForEach(RS_Subfield in 17.995)
{
Count(US_Subfields in RS_Subfield) EQ 2OR 3
}
T
1O17.997-SubfieldsCount(RS_Subfields in 17.997) MO [1 to 255]
AND
ForEach(RS_Subfield in 17.997)
{
Count(US_Subfields in RS_Subfield) EQ 1 OR 2
}
T
O17.998-Subfields<要件 ID: “Field: Geographic-Conditional” を参照してください。>t-2
Field: Type17-CondCodeTable 71<表 71 は、各フィールドの条件コードを規定しています。>1-Type17-CondCodePresent(17.001 to 17.013, 17.025, 17.032, 17.999)
AND
NOT Present(17.018, 17.027 to 17.029, 17.038, 17.039, 17.042 to 17.199, 17.901, 17.903 to 17.994)
B
Field: 17.015-Rotation Uncertainty DependentTable 71, 8.17.15このフィールドは、Field 17.014: Rotation angle of eye / RAE が存在する場合は必須です。2D17.015-CondCode DependentIF Present(17.014) THEN Present(17.015)B
Field: Type17-CharType8.17, Table 71<表 71 は、サブフィールドを含まない各フィールドの文字種別を規定しています。>1-Type17-CharType NBytes(17.[001,002,003, 005 to 010, 012, 022, 023, 026, 031, 032, 040, 041]) MO [0x30 to 0x39]B
1-Type17-CharType ABytes(17.[013, 020, 030]) MO [0x41 to 0x5A, 0x61 to 0x7A]B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1-Type17-CharType ANBytes(17.[011, 014, 015]) [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]B
1O17.017-CharType ANSBytes(17.017) MO [0x20, 0x7E]B
1O17.996-CharType HBytes(10.996) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]B
Field: Type17-Subfield CharType8.17, Table 71<Table 71 specifies the Character Type for each subfield.>1M17.004-Subfield CharType UPresent( Bytes( US_Subfields:1,2 in 17.004 )B*
1O17.016-Subfield CharType NBytes(All(US_Subfields in 17.016)) MO [0x30 to 0x39]B*
1O17.019-Subfield CharType UPresent( Bytes( US_Subfields:1 to 3 in 17.019)B*
1O17.024-Subfield CharType HNForEach(RS_Subfield in 17.024)
{
Bytes(US_Subfields:1,3 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:2 in RS_Subfield)) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1M17.025-Subfield CharType ANBytes(US_Subfields:1 in 17.025)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
AND
Bytes(US_Subfields:2,3 in 17.025)) MO [0x30 to 0x39]
B*
1M17.033-Subfield CharType ANBytes(US_Subfields:1 in 17.033)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
For(X EQ 2 to Count(US_Subfields in 17.033))
{
Bytes(US_Subfield:X in 17.033) MO [0x30 to 0x39]
}
B*
1O17.034-Subfield CharType ANBytes(US_Subfields:1 in 17.034)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
For(X EQ 2 to Count(US_Subfields in 17.034))
{
Bytes(US_Subfield:X in 17.034) MO [0x30 to 0x39]
}
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1-Type17-CharType ANBytes(17.[011, 014, 015]) [0x30 to 0x39, 0x41 to 0x5A, 0x61 to 0x7A]B
1O17.017-CharType ANSBytes(17.017) MO [0x20, 0x7E]B
1O17.996-CharType HBytes(10.996) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]B
Field: Type17-Subfield CharType8.17, Table 71<表 71 は、各サブフィールドの文字種別を規定しています。>1M17.004-Subfield CharType UPresent( Bytes( US_Subfields:1,2 in 17.004 )B*
1O17.016-Subfield CharType NBytes(All(US_Subfields in 17.016)) MO [0x30 to 0x39]B*
1O17.019-Subfield CharType UPresent( Bytes( US_Subfields:1 to 3 in 17.019)B*
1O17.024-Subfield CharType HNForEach(RS_Subfield in 17.024)
{
Bytes(US_Subfields:1,3 in RS_Subfield)) MO [0x30 to 0x39]
AND
Bytes(US_Subfields:2 in RS_Subfield)) MO [0x30 to 0x39,0x41 to 0x46, 0x61 to 0x66]
}
B*
1M17.025-Subfield CharType ANBytes(US_Subfields:1 in 17.025)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
AND
Bytes(US_Subfields:2,3 in 17.025)) MO [0x30 to 0x39]
B*
1M17.033-Subfield CharType ANBytes(US_Subfields:1 in 17.033)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
For(X EQ 2 to Count(US_Subfields in 17.033))
{
Bytes(US_Subfield:X in 17.033) MO [0x30 to 0x39]
}
B*
1O17.034-Subfield CharType ANBytes(US_Subfields:1 in 17.034)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
For(X EQ 2 to Count(US_Subfields in 17.034))
{
Bytes(US_Subfield:X in 17.034) MO [0x30 to 0x39]
}
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1O17.035-Subfield CharType ANBytes(US_Subfields:1 in 17.035)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
For(X EQ 2 to Count(US_Subfields in 17.035))
{
Bytes(US_Subfield:X in 17.035) MO [0x30 to 0x39]
}
B*
1O17.036-Subfield CharType ANBytes(US_Subfields:1 in 17.036)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
For(X EQ 2 to Count(US_Subfields in 17.036))
{
Bytes(US_Subfield:X in 17.036) MO [0x30 to 0x39]
}
B*
1O17.037-Subfield CharType ANForEach(RS_Subfield in 17.037)
{
Bytes(US_Subfields:1,2 in RS_Subfield)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
AND
For(X EQ 3 to Count(US_Subfields in RS_Subfield))
{
Bytes(US_Subfield:X in RS_Subfield) MO [0x30 to 0x39]
}
}
B*
1O17.995-Subfield CharType NBytes(All(US_Subfields:1,2 in 17.995)) MO [0x30 to 0x39]B*
1O17.997-Subfield CharType NBytes(All(US_Subfields:1,2 in 17.997)) MO [0x30 to 0x39]B*
O17.998-Subfield CharType ANSU<See Requirement ID: “Field: Geographic”>t-2
Field: Type17-CharCountTable 71<Table 71 specifies the Character Count for each field that contains no subfields.>1M17.001-CharCountDataLength(17.001) GTE 1B
1M17.002-CharCountDataLength(17.002) EQ 1 OR 2B
1M17.003-CharCountDataLength(17.003) EQ 1B
1M17.005-DataLength(17.005) EQ 8B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1O17.035-Subfield CharType ANBytes(US_Subfields:1 in 17.035)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
For(X EQ 2 to Count(US_Subfields in 17.035))
{
Bytes(US_Subfield:X in 17.035) MO [0x30 to 0x39]
}
B*
1O17.036-Subfield CharType ANBytes(US_Subfields:1 in 17.036)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
For(X EQ 2 to Count(US_Subfields in 17.036))
{
Bytes(US_Subfield:X in 17.036) MO [0x30 to 0x39]
}
B*
1O17.037-Subfield CharType ANForEach(RS_Subfield in 17.037)
{
Bytes(US_Subfields:1,2 in RS_Subfield)) MO [0x41 to 0x5A, 0x61 to 0x7A]]
AND
For(X EQ 3 to Count(US_Subfields in RS_Subfield))
{
Bytes(US_Subfield:X in RS_Subfield) MO [0x30 to 0x39]
}
}
B*
1O17.995-Subfield CharType NBytes(All(US_Subfields:1,2 in 17.995)) MO [0x30 to 0x39]B*
1O17.997-Subfield CharType NBytes(All(US_Subfields:1,2 in 17.997)) MO [0x30 to 0x39]B*
O17.998-Subfield CharType ANSU<要件 ID: “Field: Geographic” を参照してください。>t-2
Field: Type17-CharCountTable 71<表 71 は、サブフィールドを含まない各フィールドの文字数を規定しています。>1M17.001-CharCountDataLength(17.001) GTE 1B
1M17.002-CharCountDataLength(17.002) EQ 1 OR 2B
1M17.003-CharCountDataLength(17.003) EQ 1B
1M17.005-DataLength(17.005) EQ 8B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
CharCount
1M17.006-CharCountDataLength(17.006) MO [2 to 5]B
1M17.007-CharCountDataLength(17.007) MO [2 to 5]B
1M17.008-CharCountDataLength(17.008) EQ 1B
1M17.009-CharCountDataLength(17.009) MO [1 to 5]B
1M17.010-CharCountDataLength(17.010) MO [1 to 5]B
1M17.011-CharCountDataLength(17.011) MO [3 to 4]B
1M17.012-CharCountDataLength(17.012) EQ 1 OR 2B
1M17.013-CharCountDataLength(17.013) MO [3 to 4]B
1O17.014-CharCountDataLength(17.014) MO [1 to 5]B
1D17.015-CharCountDataLength(17.015) MO [1 to 5]B
1O17.017-CharCountDataLength(17.017) MO [13 to 16]B
1O17.020-CharCountDataLength(17.020) EQ 3B
1O17.021-CharCountDataLength(17.021) MO [1 to 126]B
1O17.022-CharCountDataLength(17.022) MO [1 to 4]B
1O17.023-CharCountDataLength(17.023) MO [1 to 4]B
1O17.026-CharCountDataLength(17.026) MO [2 to 4]B
1O17.030-CharCountDataLength(17.030) MO [7 to 10]B
1O17.031-CharCountDataLength(17.031) EQ 2B
1M17.032-CharCountDataLength(17.032) MO [7 to 10]B
1O17.040-CharCountDataLength(17.040) MO [1 to 7]B
1O17.041-CharCountDataLength(17.041) EQ 1 OR 2B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
CharCount
1M17.006-CharCountDataLength(17.006) MO [2 to 5]B
1M17.007-CharCountDataLength(17.007) MO [2 to 5]B
1M17.008-CharCountDataLength(17.008) EQ 1B
1M17.009-CharCountDataLength(17.009) MO [1 to 5]B
1M17.010-CharCountDataLength(17.010) MO [1 to 5]B
1M17.011-CharCountDataLength(17.011) MO [3 to 4]B
1M17.012-CharCountDataLength(17.012) EQ 1 OR 2B
1M17.013-CharCountDataLength(17.013) MO [3 to 4]B
1O17.014-CharCountDataLength(17.014) MO [1 to 5]B
1D17.015-CharCountDataLength(17.015) MO [1 to 5]B
1O17.017-CharCountDataLength(17.017) MO [13 to 16]B
1O17.020-CharCountDataLength(17.020) EQ 3B
1O17.021-CharCountDataLength(17.021) MO [1 to 126]B
1O17.022-CharCountDataLength(17.022) MO [1 to 4]B
1O17.023-CharCountDataLength(17.023) MO [1 to 4]B
1O17.026-CharCountDataLength(17.026) MO [2 to 4]B
1O17.030-CharCountDataLength(17.030) MO [7 to 10]B
1O17.031-CharCountDataLength(17.031) EQ 2B
1M17.032-CharCountDataLength(17.032) MO [7 to 10]B
1O17.040-CharCountDataLength(17.040) MO [1 to 7]B
1O17.041-CharCountDataLength(17.041) EQ 1 OR 2B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1O17.996-CharCountDataLength(17.995) EQ 64B
1M17.999-CharCountDataLength(17.999) GTE 1B
Field: Type17-Subfield CharCountTable 71<Table 71 specifies the Character Count for each subfield.>1M17.004-Subfield CharCountLength(All(US_Subfields in 17.004)) GTE 1B*
1O17.016-Subfield CharCountLength(All(US_Subfields in 17.016)) EQ 1B*
1O17.019-Subfield CharCountLength(All(US_Subfields in 17.019)) MO [1 to 50]B*
1O17.024-Subfield CharCountForEach(RS_Subfield in 17.024)
{
Length(US_Subfields:1 in RS_Subfield)) MO [1 to 3]
AND
Length(US_Subfields:2 in RS_Subfield)) EQ 4 AND
Length(US_Subfields:3 in RS_Subfield)) MO [1 to 5]
}
B*
1M17.025-Subfield CharCountForEach(RS_Subfield in 17.025)
{
Length(US_Subfields:1 in RS_Subfield)) MO [3 to 9]
AND
Length(US_Subfields:2,3 in RS_Subfield)) EQ 3
}
B*
1O17.023-Subfield CharCountForEach(RS_Subfield in 17.023)
{
Length(US_Subfields:1 in RS_Subfield)) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield)) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield)) EQ 4 AND
Length(US_Subfields:4 in RS_Subfield)) MO [1 to 5]
}
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1O17.996-CharCountDataLength(17.995) EQ 64B
1M17.999-CharCountDataLength(17.999) GTE 1B
Field: Type17-Subfield CharCountTable 71<表 71 は、各サブフィールドの文字数を規定しています。>1M17.004-Subfield CharCountLength(All(US_Subfields in 17.004)) GTE 1B*
1O17.016-Subfield CharCountLength(All(US_Subfields in 17.016)) EQ 1B*
1O17.019-Subfield CharCountLength(All(US_Subfields in 17.019)) MO [1 to 50]B*
1O17.024-Subfield CharCountForEach(RS_Subfield in 17.024)
{
Length(US_Subfields:1 in RS_Subfield)) MO [1 to 3]
AND
Length(US_Subfields:2 in RS_Subfield)) EQ 4 AND
Length(US_Subfields:3 in RS_Subfield)) MO [1 to 5]
}
B*
1M17.025-Subfield CharCountForEach(RS_Subfield in 17.025)
{
Length(US_Subfields:1 in RS_Subfield)) MO [3 to 9]
AND
Length(US_Subfields:2,3 in RS_Subfield)) EQ 3
}
B*
1O17.023-Subfield CharCountForEach(RS_Subfield in 17.023)
{
Length(US_Subfields:1 in RS_Subfield)) EQ 1 OR 2
AND
Length(US_Subfields:2 in RS_Subfield)) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield)) EQ 4 AND
Length(US_Subfields:4 in RS_Subfield)) MO [1 to 5]
}
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
1O17.024-Subfield CharCountForEach(RS_Subfield in 17.024)
{
Length(US_Subfield:1 in RS_Subfield)) EQ 1 OR 2 AND
Length(US_Subfields:2 in RS_Subfield)) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield)) EQ 4 AND
Length(US_Subfields:4 in RS_Subfield)) MO [1 to 5]
}
B*
1O17.025-Subfield CharCountForEach(RS_Subfield in 17.025)
{
Length(US_Subfields:1,2 in RS_Subfield)) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O17.033-Subfield CharCountForEach(RS_Subfield in 17.033)
{
Length(US_Subfields:1 in RS_Subfield)) EQ 1 AND
Length(US_Subfields:2 in RS_Subfield)) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O17.034-Subfield CharCountForEach(RS_Subfield in 17.034)
{
Length(US_Subfields:1 in RS_Subfield)) EQ 1 AND
Length(US_Subfields:2 in RS_Subfield)) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
1O17.024-Subfield CharCountForEach(RS_Subfield in 17.024)
{
Length(US_Subfield:1 in RS_Subfield)) EQ 1 OR 2 AND
Length(US_Subfields:2 in RS_Subfield)) MO [1 to 3]
AND
Length(US_Subfields:3 in RS_Subfield)) EQ 4 AND
Length(US_Subfields:4 in RS_Subfield)) MO [1 to 5]
}
B*
1O17.025-Subfield CharCountForEach(RS_Subfield in 17.025)
{
Length(US_Subfields:1,2 in RS_Subfield)) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O17.033-Subfield CharCountForEach(RS_Subfield in 17.033)
{
Length(US_Subfields:1 in RS_Subfield)) EQ 1 AND
Length(US_Subfields:2 in RS_Subfield)) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O17.034-Subfield CharCountForEach(RS_Subfield in 17.034)
{
Length(US_Subfields:1 in RS_Subfield)) EQ 1 AND
Length(US_Subfields:2 in RS_Subfield)) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
{
Length(US_Subfield) MO [1 to 5]
}
}
1O17.035-Subfield CharCountForEach(RS_Subfield in 17.035)
{
Length(US_Subfields:1 in RS_Subfield)) EQ 1 AND
Length(US_Subfields:2 in RS_Subfield)) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O17.036-Subfield CharCountForEach(RS_Subfield in 17.036)
{
Length(US_Subfields:1 in RS_Subfield)) EQ 1 AND
Length(US_Subfields:2 in RS_Subfield)) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O17.037-Subfield CharCountForEach(RS_Subfield in 17.037)
{
Length(US_Subfields:1,2 in RS_Subfield)) EQ 1 AND
Length(US_Subfields:3 in RS_Subfield)) MO [1 to 3]
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O17.902-Subfield CharCountForEach(RS_Subfield in 17.902)
{
Length(US_Subfield:1 in RS_Subfield) EQ 15
AND
B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
{
Length(US_Subfield) MO [1 to 5]
}
}
1O17.035-Subfield CharCountForEach(RS_Subfield in 17.035)
{
Length(US_Subfields:1 in RS_Subfield)) EQ 1 AND
Length(US_Subfields:2 in RS_Subfield)) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O17.036-Subfield CharCountForEach(RS_Subfield in 17.036)
{
Length(US_Subfields:1 in RS_Subfield)) EQ 1 AND
Length(US_Subfields:2 in RS_Subfield)) EQ 1 OR 2
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O17.037-Subfield CharCountForEach(RS_Subfield in 17.037)
{
Length(US_Subfields:1,2 in RS_Subfield)) EQ 1 AND
Length(US_Subfields:3 in RS_Subfield)) MO [1 to 3]
AND
ForEach(<additional US_Subfield in RS_Subfield>)
{
Length(US_Subfield) MO [1 to 5]
}
}
B*
1O17.902-Subfield CharCountForEach(RS_Subfield in 17.902)
{
Length(US_Subfield:1 in RS_Subfield) EQ 15
AND
B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Length(US_Subfields:2,3 in RS_Subfield) MO [1 to 64]
AND
Length(US_Subfield:4 in RS_Subfield)) MO [1 to 255]
}
1O17.995-Subfield CharCountForEach(RS_Subfield in 17.995)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3] AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
1O17.997-Subfield CharCountForEach(RS_Subfield in 17.997)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3] AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
O17.998-Subfield CharCount<See Requirement ID: “Field: Geographic”>t-2
Field: Type17-Field OccurrenceTable 71<Table 71 specifies the Field Occurrence for each field.>1-Type17-Occurrence ZeroCount(17.[018 ,027 to 029, 038, 039, 042 to 199,901,903 to 994]) EQ 0B
1MType17-Occurrence OneCount(17.[001 to 013, 025, 032, 999]) EQ 1B
1-Type14-Occurrence One or FewerCount(17.[014 to 017,019 to 024,026, 030, 031, 033 to 037, 040, 041, 902, 995 to 998) LTE 1B
Field: 17.001-Record Header Value8.17.1, Table 71, 7.1Field 17.001 Record header. In Traditional encoding, this field contains the record length in bytes (including all information separators)M17.001-Record Header<See Requirement ID “Field: xx.001-Record Header”>t-2
8.17.1, C.10.15The XML name for the Type-17 record is <itl:PackageIrisImageRecord>, and its <biom:RecordCategoryCode> element shall have a value of “17”.1MNIEM-17.001-Record HeaderForEach(XElm(itl:PackageIrisImageRecord)
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(17)
}
X
Field: 17.002-Information Designation Character8.17.2, Table 71, 7.3.1This mandatory field shall be the IDC of this Type-17 record as found in the information item IDC of Field 1.003 Transaction content/CNT.M17.002-IDC<See Requirement IDs “Field: xx.002-IDC” and “Field: 1.003-Transaction Content Subfield 2 IDC Matches” >t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Length(US_Subfields:2,3 in RS_Subfield) MO [1 to 64]
AND
Length(US_Subfield:4 in RS_Subfield)) MO [1 to 255]
}
1O17.995-Subfield CharCountForEach(RS_Subfield in 17.995)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3] AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
1O17.997-Subfield CharCountForEach(RS_Subfield in 17.997)
{
Length(US_Subfield:1 in RS_Subfield) MO [1 to 3] AND
Length(US_Subfield:2 in RS_Subfield) EQ 1 OR 2
}
B*
O17.998-Subfield CharCount<要件 ID: “Field: Geographic” を参照。>t-2
Field: Type17-Field OccurrenceTable 71<表 71 は、各フィールドの出現回数を規定しています。>1-Type17-Occurrence ZeroCount(17.[018 ,027 to 029, 038, 039, 042 to 199,901,903 to 994]) EQ 0B
1MType17-Occurrence OneCount(17.[001 to 013, 025, 032, 999]) EQ 1B
1-Type14-Occurrence One or FewerCount(17.[014 to 017,019 to 024,026, 030, 031, 033 to 037, 040, 041, 902, 995 to 998) LTE 1B
Field: 17.001-Record Header Value8.17.1, Table 71, 7.1Field 17.001 Record header。Traditional エンコーディングでは、このフィールドは、すべての情報セパレーターを含むレコード長をバイト単位で保持しますM17.001-Record Header<要件 ID: “Field: xx.001-Record Header” を参照。>t-2
8.17.1, C.10.15Type-17 レコードの XML 名は <itl:PackageIrisImageRecord> で、その <biom:RecordCategoryCode> 要素の値は「17」でなければなりません。1MNIEM-17.001-Record HeaderForEach(XElm(itl:PackageIrisImageRecord)
{
{XElm(biom:RecordCategoryCode)} EQ ASCII(17)
}
X
Field: 17.002-Information Designation Character8.17.2, Table 71, 7.3.1この必須フィールドは、Field 1.003 Transaction content/CNT の情報項目 IDC にある、この Type-17 レコードの IDC でなければなりません。M17.002-IDC<要件 ID: “Field: xx.002-IDC” and “Field: 1.003-Transaction Content Subfield 2 IDC Matches” を参照。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Value
Field: 17.003-Eye Label Value8.17.3, Table 71, 7.7.4.1<Table 71 lists the valid values for ELR.>1M17.003-ELR{17.003} MO [0 to 2]B
Field: 17.004-Originating Agency Value8.17.4, 7.6This is a mandatory field. See Section 7.6 for details.M17.004-ORG<See Requirement ID “Field: Agency Codes” >t-2
Field: 17.005-Iris Capture Date Value8.17.5, 7.7.2.3This mandatory field shall contain the date that the iris biometric data contained in the record was captured.1M17.005-ICD{17.005} MO [ValidLocalDate]t-6T
1MNIEM-17.005-ICDForEach(XElm(itl:PackageIrisImageRecord))
{
{XElm(nc:Date) in XElm(biom:CaptureDate)} MO [NIEM-ValidLocalDate]
}
t-6X
Field: 17.006-Horizontal Line Length Value8.17.6, Table 71, 7.7.8.1The maximum horizontal size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types. The minimum value is 10 pixels.M17.006-HLL<See Requirement ID “Field: Image HLL Value” >t-2
Field: 17.006-Horizontal Line Length Metadata8.17.6, Table 71, 7.7.8.1<The HLL is verified by checking the image metadata if compression is used.>2M17.006-HLL Metadata JP2,JP2LIF {17.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {17.006} EQ {ImageWidth-JP2,JP2L}t-11B
2M17.006-HLL Metadata PNGIF {17.011} EQ ASCII(PNG) THEN
{17.006} EQ {ImageWidth-PNG}
t-11B
Field: 17.007-Vertical Line Length Value8.17.7, Table 71, 7.7.8.2The maximum vertical size is limited to 65,534 pixels in Record Types-4 and 8, and to 99,999 for other record types.
The minimum value is 10 pixels.
M17.007-VLL<See Requirement ID “Field: Image VLL Value” >t-2
Field: 17.007-Vertical Line Length Metadata8.17.7, Table 71, 7.7.8.2<The VLL is verified by checking the image metadata if compression is used.>2M17.007-VLL Metadata JP2, JP2LIF {17.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {17.007} EQ {ImageHeight-JP2,JP2L}t-11B
2M17.007-VLL Metadata PNGIF {17.011} EQ ASCII(PNG) THEN
{17.007} EQ {ImageHeight-PNG}
t-11B
Field: 17.008-Scale Units Value8.17.8, Table 71, 7.7.8.3<Table 71 lists the value constraints for SLC>M17.008-SLC<See Requirement ID “Field: Image SLC Value” >t-2
Field: 17.008-Scale Units Metadata8.17.8, Table 71, 7.7.8.3A value of “1” shall indicate pixels per inch.
A value of “2” shall indicate pixels per centimeter. A value of “0” in this field indicates that no scale is provided, and
17.008-SLC Metadata JP2,JP2L<Not Tested.>t-12B
2M17.008-SLC MetadataIF {17.011} EQ ASCII(PNG) THEN
IF {17.008} EQ 1 OR 2 THEN { SamplingUnits-
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Value
Field: 17.003-Eye Label Value8.17.3, Table 71, 7.7.4.1<表 71 は ELR の有効な値を列挙しています。>1M17.003-ELR{17.003} MO [0 to 2]B
Field: 17.004-Originating Agency Value8.17.4, 7.6これは必須のフィールドです。詳細は 7.6 節を参照してください。M17.004-ORG<要件 ID: “Field: Agency Codes” を参照してください。>t-2
Field: 17.005-Iris Capture Date Value8.17.5, 7.7.2.3この必須フィールドは、レコードに含まれる虹彩生体データが採取された日付を保持しなければなりません。1M17.005-ICD{17.005} MO [ValidLocalDate]t-6T
1MNIEM-17.005-ICDForEach(XElm(itl:PackageIrisImageRecord))
{
{XElm(nc:Date) in XElm(biom:CaptureDate)} MO [NIEM-ValidLocalDate]
}
t-6X
Field: 17.006-Horizontal Line Length Value8.17.6, Table 71, 7.7.8.1水平方向の最大サイズは、Record Types-4 および 8 では 65,534 画素、その他のレコードタイプでは 99,999 に制限されます。最小値は 10 画素です。M17.006-HLL<要件 ID: “Field: Image HLL Value” を参照してください。>t-2
Field: 17.006-Horizontal Line Length Metadata8.17.6, Table 71, 7.7.8.1<HLL は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>2M17.006-HLL Metadata JP2,JP2LIF {17.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {17.006} EQ {ImageWidth-JP2,JP2L}t-11B
2M17.006-HLL Metadata PNGIF {17.011} EQ ASCII(PNG) THEN
{17.006} EQ {ImageWidth-PNG}
t-11B
Field: 17.007-Vertical Line Length Value8.17.7, Table 71, 7.7.8.2垂直方向の最大サイズは、Record Types-4 および 8 では 65,534 画素、その他のレコードタイプでは 99,999 に制限されます。
最小値は 10 画素です。
M17.007-VLL<要件 ID: “Field: Image VLL Value” を参照してください。>t-2
Field: 17.007-Vertical Line Length Metadata8.17.7, Table 71, 7.7.8.2<VLL は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>2M17.007-VLL Metadata JP2, JP2LIF {17.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN {17.007} EQ {ImageHeight-JP2,JP2L}t-11B
2M17.007-VLL Metadata PNGIF {17.011} EQ ASCII(PNG) THEN
{17.007} EQ {ImageHeight-PNG}
t-11B
Field: 17.008-Scale Units Value8.17.8, Table 71, 7.7.8.3<表 71 は SLC の値の制約を列挙しています。>M17.008-SLC<要件 ID: “Field: Image SLC Value” を参照してください。>t-2
Field: 17.008-Scale Units Metadata8.17.8, Table 71, 7.7.8.3値「1」は、インチあたりの画素数を示さなければなりません。
値「2」は、センチメートルあたりの画素数を示さなければなりません。このフィールドの値「0」は、縮尺が与えられていないことを示し、
17.008-SLC Metadata JP2,JP2L<試験しません。>t-12B
2M17.008-SLC MetadataIF {17.011} EQ ASCII(PNG) THEN
IF {17.008} EQ 1 OR 2 THEN { SamplingUnits-
t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
the quotient of THPS/TVPS shall provide the pixel aspect ratio.
<The SLC is verified by checking the image metadata if compression is used.>
PNGPNG} EQ 1, ELSE IF {17.008} EQ 0 THEN { SamplingUnits-PNG} EQ 0
Field: 17.009-Transmitted Horizontal Pixel Scale Value8.17.9, Table 71, 7.7.8.4<Table 71 lists the value constraints for THPS.>M17.009-THPS<See Requirement ID “Field: Image THPS Value” >t-2
Field: 17.009-Transmitted Horizontal Pixel Scale Metadata8.17.9, Table 71, 7.7.8.4This is the integer pixel density used in the horizontal direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the horizontal component of the pixel aspect ratio, up to 5 digits.
<The THPS is verified by checking the image metadata if compression is used.>
17.009-THPS Metadata JP2, JP2L<Not Tested.>t-12B
2M17.009-THPS Metadata PNGIF {17.011} EQ ASCII(PNG) AND {17.008} EQ 1
THEN {17.009} EQ {HorizontalDensity-PNG} * 0.0254 (meters/inch)
ELSE IF {17.011} EQ ASCII(PNG) AND {17.008} EQ 2
THEN {17.009} EQ {HorizontalDensity-PNG} * 0.01 (meters/cm)
t-11B
17.009-THPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M17.009-THPS Aspect Ratio Metadata PNGIF {17.011} EQ ASCII(PNG) AND {17.008} NEQ 1 OR 2
THEN {17.009}/{17.010} EQ {HorizontalDensity-PNG} / {VerticalDensity-PNG}
t-11B
Field: 17.010-Transmitted Vertical Pixel Scale Value8.17.10, Table 71, 7.7.8.5<Table 71 lists the value constraints for TVPS.>M17.010-TVPS<See Requirement ID “Field: Image TVPS Value” >t-2
Field: 17.010-Transmitted Vertical Pixel Scale8.17.10, Table 71, 7.7.8.5This is the integer pixel density used in the Vertical direction of the image if SLC has a value of “1” or “2”. If SLC has a value of “0”, this information item shall contain the Vertical component of the17.010-TVPS Metadata JP2, JP2L<Not Tested.>t-12B
2M17.010-IF {17.011} EQ ASCII(PNG) AND {17.008} EQ 1t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
THPS/TVPS の商が画素アスペクト比を示します。
<SLC は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
PNGPNG} EQ 1, ELSE IF {17.008} EQ 0 THEN { SamplingUnits-PNG} EQ 0
Field: 17.009-Transmitted Horizontal Pixel Scale Value8.17.9, Table 71, 7.7.8.4<表 71 は THPS の値の制約を列挙しています。>M17.009-THPS<要件 ID “Field: Image THPS Value” を参照してください。>t-2
Field: 17.009-Transmitted Horizontal Pixel Scale Metadata8.17.9, Table 71, 7.7.8.4これは、SLC の値が「1」または「2」の場合に画像の水平方向で使用される整数の画素密度です。SLC の値が「0」の場合、この情報項目は、画素アスペクト比の水平成分を最大 5 桁で保持しなければなりません。
<THPS は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
17.009-THPS Metadata JP2, JP2L<試験しません。>t-12B
2M17.009-THPS Metadata PNGIF {17.011} EQ ASCII(PNG) AND {17.008} EQ 1
THEN {17.009} EQ {HorizontalDensity-PNG} * 0.0254 (meters/inch)
ELSE IF {17.011} EQ ASCII(PNG) AND {17.008} EQ 2
THEN {17.009} EQ {HorizontalDensity-PNG} * 0.01 (meters/cm)
t-11B
17.009-THPS Aspect Ratio Metadata JP2, JP2L<試験しません。>t-12B
2M17.009-THPS Aspect Ratio Metadata PNGIF {17.011} EQ ASCII(PNG) AND {17.008} NEQ 1 OR 2
THEN {17.009}/{17.010} EQ {HorizontalDensity-PNG} / {VerticalDensity-PNG}
t-11B
Field: 17.010-Transmitted Vertical Pixel Scale Value8.17.10, Table 71, 7.7.8.5<表 71 は TVPS の値の制約を列挙しています。>M17.010-TVPS<要件 ID “Field: Image TVPS Value” を参照してください。>t-2
Field: 17.010-Transmitted Vertical Pixel Scale8.17.10, Table 71, 7.7.8.5これは、SLC の値が「1」または「2」の場合に画像の垂直方向で使用される整数の画素密度です。SLC の値が「0」の場合、この情報項目は、画素アスペクト比の垂直成分を17.010-TVPS Metadata JP2, JP2L<試験しません。>t-12B
2M17.010-IF {17.011} EQ ASCII(PNG) AND {17.008} EQ 1t-11B
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Metadatapixel aspect ratio, up to 5 digits.
<The TVPS is verified by checking the image metadata if compression is used.>
TVPS Metadata PNGTHEN {17.010} EQ {VerticalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {17.011} EQ ASCII(PNG) AND {17.008} EQ 2
THEN {17.010} EQ {VerticalDensity-PNG} * 0.01 (meters/cm)
17.010-TVPS Aspect Ratio Metadata JP2, JP2L<Not Tested.>t-12B
2M17.010-TVPS Aspect Ratio Metadata PNGIF {17.011} EQ ASCII(PNG) AND {17.008} NEQ 1 OR 2
THEN {17.009}/{17.010} EQ { HorizontalDensity - PNG} / {VerticalDensity-PNG}
t-11B
Field: 17.011-Compression Algorithm Value8.17.11, Table 71, 7.7.9.1For each of these fields, the entry corresponds to the appropriate Label entry in Table 12: Field 17.011: Compression algorithm / CGA.M17.011-CGA<See Requirement ID “Field: Type17 Compression”.>t-2
Field: 17.011-Compression Algorithm Metadata8.17.11, Table 71<The CGA is verified by checking the image metadata for the compression type signature if compression is used.>2M17.011-CGA Metadata JP2, JP2LIF {17.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox)t-11B
2M17.011-CGA Metadata PNGIF {17.011} EQ ASCII(PNG) THEN
Present(PNGSig)
t-11B
Field: 17.012-Bits Per Pixel Value8.17.12, Table 71, 7.7.8.6This field shall contain an entry of “8” for normal grayscale values of “0” to “255”. Any entry in this field greater than “8” shall represent a grayscale pixel with increased proportion.M17.012-BPX<See Requirement ID “Field: Image BPX Value” >t-2
Field: 17.012- Bits Per Pixel Metadata8.17.12, Table 71<The BPX is verified by checking the image metadata for the compression type signature if compression is used.>2M17.012-BPX Metadata JP2, JP2L{17.012} EQ {BPX-JP2,JP2L}t-11B
2M17.012-BPX Metadata PNG{17.012} EQ {BPX-PNG}t-11B
Field: 17.013-Color Space Value8.17.13, Table 71, 7.7.10Table 13 lists the codes and their descriptions for each of the available color spaces used within this standard.
All other color spaces are to be marked as undefined.
M17.013-CSP<See Requirement ID: “Field: Image CSP Value”.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Metadata最大 5 桁で保持しなければなりません。
<TVPS は、圧縮が使用されている場合、画像メタデータを確認することで検証されます。>
TVPS Metadata PNGTHEN {17.010} EQ {VerticalDensity-PNG} * 0.0254 (meters/inch),
ELSE IF {17.011} EQ ASCII(PNG) AND {17.008} EQ 2
THEN {17.010} EQ {VerticalDensity-PNG} * 0.01 (meters/cm)
17.010-TVPS Aspect Ratio Metadata JP2, JP2L<試験しません。>t-12B
2M17.010-TVPS Aspect Ratio Metadata PNGIF {17.011} EQ ASCII(PNG) AND {17.008} NEQ 1 OR 2
THEN {17.009}/{17.010} EQ { HorizontalDensity - PNG} / {VerticalDensity-PNG}
t-11B
Field: 17.011-Compression Algorithm Value8.17.11, Table 71, 7.7.9.1これらの各フィールドでは、エントリーは表 12: Field 17.011: Compression algorithm / CGA の該当する Label エントリーに対応します。M17.011-CGA<要件 ID “Field: Type17 Compression” を参照してください。>t-2
Field: 17.011-Compression Algorithm Metadata8.17.11, Table 71<CGA は、圧縮が使用されている場合、画像メタデータの圧縮タイプのシグネチャを確認することで検証されます。>2M17.011-CGA Metadata JP2, JP2LIF {17.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox)t-11B
2M17.011-CGA Metadata PNGIF {17.011} EQ ASCII(PNG) THEN
Present(PNGSig)
t-11B
Field: 17.012-Bits Per Pixel Value8.17.12, Table 71, 7.7.8.6このフィールドには、グレースケール値「0」〜「255」の通常の場合は「8」を入力しなければなりません。このフィールドで「8」より大きい値は、比率を高めたグレースケール画素を表します。M17.012-BPX<要件 ID “Field: Image BPX Value” を参照してください。>t-2
Field: 17.012- Bits Per Pixel Metadata8.17.12, Table 71<BPX は、圧縮が使用されている場合、画像メタデータの圧縮タイプのシグネチャを確認することで検証されます。>2M17.012-BPX Metadata JP2, JP2L{17.012} EQ {BPX-JP2,JP2L}t-11B
2M17.012-BPX Metadata PNG{17.012} EQ {BPX-PNG}t-11B
Field: 17.013-Color Space Value8.17.13, Table 71, 7.7.10表 13 は、この規格で使用できる各色空間のコードとその説明を列挙しています。
その他のすべての色空間は、未定義として示されます。
M17.013-CSP<要件 ID “Field: Image CSP Value” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Field: 17.014-Rotation Angle of Eye Value8.17.14, Table 71The in-plane eye rotation angle shall be recorded as angle = round (65536 * angle / 360) modulo 65536. The value “FFFF” indicates rotation angle of eye is undefined.
<Table 71 lists the value constraints for RAE.>
1O17.014-RAE{17.014} MO [0 to 65535] OR EQ ASCII(FFFF)B
Field: 17.015-Rotation Uncertainty Value8.17.15, Table 71The rotation uncertainty is non-negative and equal to [round (65536 * uncertainty / 180)]. The uncertainty is measured in degrees and is the absolute value of maximum error. The value “FFFF” indicates uncertainty is undefined.
<Table 71 lists the value constraints for RAU.>
1D17.014-RAU{17.015} MO [0 to 65535] OR EQ ASCII(FFFF)B
Field: 17.015-Rotation Uncertainty Conditional8.17.15, Table 71This optional field shall indicate the uncertainty in the in-plane eye rotation given in Field 17.014: Rotation angle of eye / RAE. This field is mandatory if Field 17.014: Rotation angle of eye / RAE is present.D17.014-RAU Conditional<See Requirement ID: “Field: 17.015-Rotation Uncertainty Dependent”.>t-2
Field: 17.016-Image Property Code Value8.17.16, Table 71<Table 71 lists the value constraints for IPC.>1O17.016-IPC{US_Subfield:1,2 in 17.016} MO [0 to 2]
AND
{US_Subfield:3 in 17.016} EQ 0 OR 1
B*
Field: 17.017-Device Unique Value8.17.17, Table 71See Section 7.7.1.1 for details.
<Table 71 lists the value constraints for DUI.>
O17.017-DUI<See Requirement ID: “Field: Device ID”.>t-2
Field: 17.018-DeprecatedTable 71Deprecated; See ANSI/NIST-ITL 1-2007 for a description of this field. Not to be used for any new transactions.-17.019-Deprecated<See Requirement ID: “Field: Type17-CondCode>.t-2
Field: 17.019-Make/Model/Serial Number Value8.17.18, 7.7.1.2, Table 71See Section 7.7.1.2 for details.
<Table 71 lists the value constraints for MMS.>
O17.019-MMS<See Requirement ID: “Field: Make Model”.>t-2
Field: 17.020-Eye Color Value8.17.19, 7.7.11, Table 71, Table 14See Section 7.7.11 and Table 14 for details on entering values to this field.
<Table 71 lists the value constraints for ECL.>
O17.020-ECL<See Requirement ID: “Field: Image ECL Value”.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Field: 17.014-Rotation Angle of Eye Value8.17.14, Table 71面内の眼の回転角は、angle = round (65536 * angle / 360) modulo 65536 として記録されなければなりません。値「FFFF」は、眼の回転角が未定義であることを示します。
<表 71 は RAE の値の制約を列挙しています。>
1O17.014-RAE{17.014} MO [0 to 65535] OR EQ ASCII(FFFF)B
Field: 17.015-Rotation Uncertainty Value8.17.15, Table 71回転の不確かさは非負で、[round (65536 * uncertainty / 180)] に等しくなります。不確かさは度で測定され、最大誤差の絶対値です。値「FFFF」は、不確かさが未定義であることを示します。
<表 71 は RAU の値の制約を列挙しています。>
1D17.014-RAU{17.015} MO [0 to 65535] OR EQ ASCII(FFFF)B
Field: 17.015-Rotation Uncertainty Conditional8.17.15, Table 71この任意のフィールドは、Field 17.014: Rotation angle of eye / RAE で与えられる面内の眼の回転の不確かさを示さなければなりません。このフィールドは、Field 17.014: Rotation angle of eye / RAE が存在する場合は必須です。D17.014-RAU Conditional<要件 ID “Field: 17.015-Rotation Uncertainty Dependent” を参照してください。>t-2
Field: 17.016-Image Property Code Value8.17.16, Table 71<表 71 は IPC の値の制約を列挙しています。>1O17.016-IPC{US_Subfield:1,2 in 17.016} MO [0 to 2]
AND
{US_Subfield:3 in 17.016} EQ 0 OR 1
B*
Field: 17.017-Device Unique Value8.17.17, Table 71詳細は 7.7.1.1 節を参照してください。
<表 71 は DUI の値の制約を列挙しています。>
O17.017-DUI<要件 ID “Field: Device ID” を参照してください。>t-2
Field: 17.018-DeprecatedTable 71非推奨です。このフィールドの説明は ANSI/NIST-ITL 1-2007 を参照してください。新しいトランザクションには使用してはなりません。-17.019-Deprecated<要件 ID “Field: Type17-CondCode” を参照してください。>t-2
Field: 17.019-Make/Model/Serial Number Value8.17.18, 7.7.1.2, Table 71詳細は 7.7.1.2 節を参照してください。
<表 71 は MMS の値の制約を列挙しています。>
O17.019-MMS<要件 ID “Field: Make Model” を参照してください。>t-2
Field: 17.020-Eye Color Value8.17.19, 7.7.11, Table 71, Table 14このフィールドへの値の入力の詳細は、7.7.11 節および表 14 を参照してください。
<表 71 は ECL の値の制約を列挙しています。>
O17.020-ECL<要件 ID “Field: Image ECL Value” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Field: 17.021-Comment Value8.17.20, Table 71, 7.4.4See section 7.4.4 for details.O17.021-COM<See Requirement ID: “Field: Comment>.t-2
Field: 17.022-Scanned Horizontal Pixel Scale Value8.17.21, 7.7.8.7, 7.4.4See section 7.7.8.7 for details.O17.021-SHPS<See Requirement ID: “Field: Image SHPS Value”.>t-2
Field: 17.023-Scanned Vertical Pixel Scale Value8.17.22, 7.7.8.8, 7.4.4See section 7.7.8.8 for details.O17.021-SVPS<See Requirement ID: “Field: Image SVPS Value”.>t-2
Field: 17.024-Image Quality Score Value8.17.23, Table 71<Table 71 lists the value constraints for IQS.>O17.024-IQS<See Requirement ID: “Field: Sample Quality Occurrences”, “Field: Sample Quality Subfield 1”, “Field: Sample Quality Subfield 2”’ “Field: Sample Quality Subfield 3”.>t-2
Field: 17.025-Effective Acquisition Spectrum Value8.17.24, Table 71, Table 72<Table 71 lists the value constraints for EAS.>1M17.025-EAS{US_Subfield:1 in 17.025} MO [ASCII(NIR, DEFINED, VIS, RED, UNDEFINED)]
AND
{US_Subfields:2,3 in 17.025} MO [500 to 999]
B*
Field: 17.025-Effective Acquisition Spectrum Conditional Subfields8.17.24, Table 71, Table 72The second and third information items are conditional upon the value of SPV. These values are mandatory only when SPV = “DEFINED”; otherwise, they are not used.M17.025-EAS Conditional Subfields<See Requirement ID: “Field: Type17-Subfield Occurrence”.>t-2
Field: 17.026-Iris Diameter Value8.17.25, Table 71, Table 72<Table 71 lists the value constraints for IRD.>1O17.026-IRD{17.026} MO [10 to 9999]B
Field: 17.027-17.029 ReservedTable 71Reserved for future useonly by ANSI/NIST-ITL.-17.027 to 17.029 Reserved<See Requirement ID: “Field: Type17-CondCode>.t-2
Field: 17.030-Device Monitoring8.17.26, 7.7.1.3, Table 71, Table 3See Section 7.7.1.3 for details.
<Table 71 lists the value constraints for DMM.>
O17.030-DMM<See Requirement ID: “Field: Device Monitoring” >.t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Field: 17.021-Comment Value8.17.20, Table 71, 7.4.4詳細は 7.4.4 節を参照してください。O17.021-COM<要件 ID: “Field: Comment を参照してください。>t-2
Field: 17.022-Scanned Horizontal Pixel Scale Value8.17.21, 7.7.8.7, 7.4.4詳細は 7.7.8.7 節を参照してください。O17.021-SHPS<要件 ID: “Field: Image SHPS Value”. を参照してください。>t-2
Field: 17.023-Scanned Vertical Pixel Scale Value8.17.22, 7.7.8.8, 7.4.4詳細は 7.7.8.8 節を参照してください。O17.021-SVPS<要件 ID: “Field: Image SVPS Value”. を参照してください。>t-2
Field: 17.024-Image Quality Score Value8.17.23, Table 71<表 71 は IQS の値の制約を列挙しています。>O17.024-IQS<要件 ID: “Field: Sample Quality Occurrences”, “Field: Sample Quality Subfield 1”, “Field: Sample Quality Subfield 2”’ “Field: Sample Quality Subfield 3”. を参照してください。>t-2
Field: 17.025-Effective Acquisition Spectrum Value8.17.24, Table 71, Table 72<表 71 は EAS の値の制約を列挙しています。>1M17.025-EAS{US_Subfield:1 in 17.025} MO [ASCII(NIR, DEFINED, VIS, RED, UNDEFINED)]
AND
{US_Subfields:2,3 in 17.025} MO [500 to 999]
B*
Field: 17.025-Effective Acquisition Spectrum Conditional Subfields8.17.24, Table 71, Table 722 番目と 3 番目の情報項目は、SPV の値によって決まります。これらの値は、SPV = “DEFINED” の場合にのみ必須で、それ以外の場合は使用されません。M17.025-EAS Conditional Subfields<要件 ID: “Field: Type17-Subfield Occurrence”. を参照してください。>t-2
Field: 17.026-Iris Diameter Value8.17.25, Table 71, Table 72<表 71 は IRD の値の制約を列挙しています。>1O17.026-IRD{17.026} MO [10 to 9999]B
Field: 17.027-17.029 ReservedTable 71ANSI/NIST-ITL のみによる将来の使用のために予約されています。-17.027 to 17.029 Reserved<要件 ID: “Field: Type17-CondCode を参照してください。>t-2
Field: 17.030-Device Monitoring8.17.26, 7.7.1.3, Table 71, Table 3詳細は 7.7.1.3 節を参照してください。
<表 71 は DMM の値の制約を列挙しています。>
O17.030-DMM<要件 ID: “Field: Device Monitoring” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Mode Value
Field: 17.031-Subject Acquisition Profile-Iris Value8.17.27<Table 71 lists the value constraints for IAP.>O17.031-IAP<See Requirement ID: “Field: IAP Values” >.t-2
Field: 17.032-Iris Storage Format Value8.17.28<Table 71 lists the value constraints for ISF.>1M17.032-ISF{17.032} MO [1 to 3, 7]B
Field: 17.033-Iris Pupil Boundary Value8.17.29, Table 71, Table 16<Table 71 lists the value constraints for IPB.>1M⇑17.033-Subfield 1 - BYC{US_Subfield:1 in 17.033} MO [ASCII(C,E,P)]B*
1M⇑17.033-Subfield 2-NOP{US_Subfield:2 in 17.033} MO [2 to 99]B*
1M⇑17.033-Subfield PairFor(X EQ 3 to {US_Subfield:2 in 17.033})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.006}
}
B*
Field: 17.034-Iris Sclera Boundary Value8.17.30, Table 71, Table 16<Table 71 lists the value constraints for ISB.>1M⇑17.034-Subfield 1 - BYC{US_Subfield:1 in 17.034} MO [ASCII(C,E,P)]B*
1M⇑17.034-Subfield 2-NOP{US_Subfield:2 in 17.034} MO [2 to 99]B*
1M⇑17.034-Subfield PairFor(X EQ 3 to {US_Subfield:2 in 17.034})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.006}
}
B*
Field: 17.035-8.17.31, Table 71,<Table 71 lists the value constraints for UEB.>1M⇑17.035-Subfield 1 -{US_Subfield:1 in 17.035} MO [ASCII(C,E,P)]B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Mode Value
Field: 17.031-Subject Acquisition Profile-Iris Value8.17.27<表 71 は IAP の値の制約を列挙しています。>O17.031-IAP<要件 ID: “Field: IAP Values” を参照してください。>t-2
Field: 17.032-Iris Storage Format Value8.17.28<表 71 は ISF の値の制約を列挙しています。>1M17.032-ISF{17.032} MO [1 to 3, 7]B
Field: 17.033-Iris Pupil Boundary Value8.17.29, Table 71, Table 16<表 71 は IPB の値の制約を列挙しています。>1M⇑17.033-Subfield 1 - BYC{US_Subfield:1 in 17.033} MO [ASCII(C,E,P)]B*
1M⇑17.033-Subfield 2-NOP{US_Subfield:2 in 17.033} MO [2 to 99]B*
1M⇑17.033-Subfield PairFor(X EQ 3 to {US_Subfield:2 in 17.033})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.006}
}
B*
Field: 17.034-Iris Sclera Boundary Value8.17.30, Table 71, Table 16<表 71 は ISB の値の制約を列挙しています。>1M⇑17.034-Subfield 1 - BYC{US_Subfield:1 in 17.034} MO [ASCII(C,E,P)]B*
1M⇑17.034-Subfield 2-NOP{US_Subfield:2 in 17.034} MO [2 to 99]B*
1M⇑17.034-Subfield PairFor(X EQ 3 to {US_Subfield:2 in 17.034})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.006}
}
B*
Field: 17.035-8.17.31, Table 71,<表 71 は UEB の値の制約を列挙しています。>1M⇑17.035-Subfield 1 -{US_Subfield:1 in 17.035} MO [ASCII(C,E,P)]B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Upper Eyelid Boundary ValueTable 16BYC
1M⇑17.035-Subfield 2-NOP{US_Subfield:2 in 17.035} MO [2 to 99]B*
1M⇑17.035-Subfield PairFor(X EQ 3 to {US_Subfield:2 in 17.035})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.006}
}
B*
Field: 17.036-Lower Eyelid Boundary Value8.17.32, Table 71, Table 16<Table 71 lists the value constraints for LEB.>1M⇑17.036-Subfield 1 - BYC{US_Subfield:1 in 17.036} MO [ASCII(C,E,P)]B*
1M⇑17.036-Subfield 2-NOP{US_Subfield:2 in 17.036} MO [2 to 99]B*
1M⇑17.036-Subfield PairFor(X EQ 3 to {US_Subfield:2 in 17.036})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.006}
}
B*
Field: 17.037-Non-Eyulid Occlusions Value8.17.33, Table 71, Table 17, Table 18<Table 71 lists the value constraints for NEO.>1M⇑17.037-Subfield 1 - BYCForEach(RS_Subfield in 17.037)
{
{US_Subfield:1 in RS_Subfield} MO [ASCII(T,I,L,S)]
}
B*
1M⇑17.037-Subfield 2-NOPForEach(RS_Subfield in 17.037)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII(L,S,C,R,O)]
}
B*
1M⇑17.037-Subfield 2-NOPForEach(RS_Subfield in 17.037)
{
{US_Subfield:3 in RS_Subfield} MO [3 to 99]
}
B*
1M17.037-ForEach(RS_Subfield in 17.037)B*
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Upper Eyelid Boundary ValueTable 16BYC
1M⇑17.035-Subfield 2-NOP{US_Subfield:2 in 17.035} MO [2 to 99]B*
1M⇑17.035-Subfield PairFor(X EQ 3 to {US_Subfield:2 in 17.035})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.006}
}
B*
Field: 17.036-Lower Eyelid Boundary Value8.17.32, Table 71, Table 16<表 71 は LEB の値の制約を列挙しています。>1M⇑17.036-Subfield 1 - BYC{US_Subfield:1 in 17.036} MO [ASCII(C,E,P)]B*
1M⇑17.036-Subfield 2-NOP{US_Subfield:2 in 17.036} MO [2 to 99]B*
1M⇑17.036-Subfield PairFor(X EQ 3 to {US_Subfield:2 in 17.036})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.007}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.006}
}
B*
Field: 17.037-Non-Eyulid Occlusions Value8.17.33, Table 71, Table 17, Table 18<表 71 は NEO の値の制約を列挙しています。>1M⇑17.037-Subfield 1 - BYCForEach(RS_Subfield in 17.037)
{
{US_Subfield:1 in RS_Subfield} MO [ASCII(T,I,L,S)]
}
B*
1M⇑17.037-Subfield 2-NOPForEach(RS_Subfield in 17.037)
{
{US_Subfield:2 in RS_Subfield} MO [ASCII(L,S,C,R,O)]
}
B*
1M⇑17.037-Subfield 2-NOPForEach(RS_Subfield in 17.037)
{
{US_Subfield:3 in RS_Subfield} MO [3 to 99]
}
B*
1M17.037-ForEach(RS_Subfield in 17.037)B*
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
⇑Subfield Pair{
For(X EQ 4 to {US_Subfield:2 in RS_Subfield})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.006}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.007}
}
}
Field: 17.038, 17.039 ReservedTable 71Reserved for future useonly by ANSI/NIST-ITL.-17.038,17.039 Reserved<See Requirement ID: “Field: Type17-CondCode>.t-2
Field: 17.040-Range Value8.17.34, Table 71<Table 71 lists the value constraints for RAN.>1O17.040-RAN{17.040} MO [Integers]B
Field: 17.041-Frontal Gaze Value8.17.35, Table 71<Table 71 lists the value constraints for GAZ.>1O17.041-GAZ{17.041} MO [0 to 90]B
Field: 17.042 to 17.199 ReservedTable 71Reserved for future useonly by ANSI/NIST-ITL.-17.042 to 17.199 Reserved<See Requirement ID: “Field: Type17-CondCode>.t-2
Field: 17.200 to 17.900-User DefinedTable 71User Defined Fields-17.200 to 17.900-User DefinedTRUEB
Field: 17.901 ReservedTable 71Reserved for future useonly by ANSI/NIST-ITL.-17.901 Reserved<See Requirement ID: “Field: Type17-CondCode>.t-2
Field: 17.902-Annotated Information Value8.17.37, Table 71, 7.4.1This is an optional field, listing the operations performed on the original source in order to prepare it for inclusion in a biometric record type. See Section 7.4.1.O17.902-ANN-Value<See Requirement ID: “Field: xx.902-ANN” >.t-2
Field: 17.903 to 17.994 ReservedTable 71Reserved for future useonly by ANSI/NIST-ITL.-17.903 to 17.994 Reserved<See Requirement ID: “Field: Type17-CondCode>.t-2
Field: 17.995-Associated Context Value8.17.38, Table 71See Section 7.3.3O17.995-ASC Value<See Requirement IDs: “Field: xx.995-ASC” and “Field: xx.995-ASC-ACN” and
“Field: xx.995-ASC-ASP”>.
t-2
Field:8.17.39,See Section 7.5.2O17.996-HAS<See Requirement ID: “Field: HAS”>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
⇑Subfield Pair{
For(X EQ 4 to {US_Subfield:2 in RS_Subfield})
{
IF X MOD 2 EQ 0
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.006}
ELSE
{US_Subfield:X in RS_Subfield} GTE 1 AND LTE {17.007}
}
}
Field: 17.038, 17.039 ReservedTable 71ANSI/NIST-ITL のみによる将来の使用のために予約されています。-17.038,17.039 Reserved<要件 ID: “Field: Type17-CondCode を参照。>t-2
Field: 17.040-Range Value8.17.34, Table 71<表 71 は RAN の値の制約を列挙しています。>1O17.040-RAN{17.040} MO [Integers]B
Field: 17.041-Frontal Gaze Value8.17.35, Table 71<表 71 は GAZ の値の制約を列挙しています。>1O17.041-GAZ{17.041} MO [0 to 90]B
Field: 17.042 to 17.199 ReservedTable 71ANSI/NIST-ITL のみによる将来の使用のために予約されています。-17.042 to 17.199 Reserved<要件 ID: “Field: Type17-CondCode を参照。>t-2
Field: 17.200 to 17.900-User DefinedTable 71ユーザー定義フィールド-17.200 to 17.900-User DefinedTRUEB
Field: 17.901 ReservedTable 71ANSI/NIST-ITL のみによる将来の使用のために予約されています。-17.901 Reserved<要件 ID: “Field: Type17-CondCode を参照。>t-2
Field: 17.902-Annotated Information Value8.17.37, Table 71, 7.4.1これは任意のフィールドで、元の情報源に対して行った、生体情報レコードタイプに含めるための準備操作を列挙します。7.4.1 節を参照してください。O17.902-ANN-Value<要件 ID: “Field: xx.902-ANN” を参照。>t-2
Field: 17.903 to 17.994 ReservedTable 71ANSI/NIST-ITL のみによる将来の使用のために予約されています。-17.903 to 17.994 Reserved<要件 ID: “Field: Type17-CondCode を参照。>t-2
Field: 17.995-Associated Context Value8.17.38, Table 717.3.3 節を参照してください。O17.995-ASC Value<要件 ID: “Field: xx.995-ASC” および “Field: xx.995-ASC-ACN” および
“Field: xx.995-ASC-ASP” を参照。>
t-2
Field:8.17.39,7.5.2 節を参照してください。O17.996-HAS<要件 ID: “Field: HAS” を参照。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
17.996-Hash ValueTable 71Value
Field: 17.997-Source Representation Value8.17.40, Table 71See Section 7.3.2O17.997-SOR Value<See Requirement IDs: “Field: xx.997-SOR” and “Field: xx.997-SOR-SRN” and
“Field: xx.997-SOR-RSP”>.
t-2
Field: 17.998-Geographic Sample Acquisition Location Value8.17.41, Table 71See Section 7.7.3O17.998-GEO Value<See Requirement IDs: “Field: Geographic”, “Field: Geographic-Conditional”, “Field: Geographic-Subfield 1” through “Field: Geographic-Values-SubField 15” >.t-2
Field: 17.999-Image Data Valid8.17.42, Table 71This is a mandatory field contains the image.
<The image metadata is checked for validity.>
2M17.999-DATA Uncompressed ValidIF {17.011} EQ ASCII(NONE) THEN Length(17.999) EQ 17.006} * {17.007}B
2M17.999-DATA JP2,JP2L ValidIF {17.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox,
HeadBox,
ImgBox)
t-11B
2M17.999-DATA PNG ValidIF {17.011} EQ ASCII(PNG) THEN
Present(PNGSig,
IHDR,
IDAT,
IEND)
t-11B
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
17.996-Hash ValueTable 71Value
Field: 17.997-Source Representation Value8.17.40, Table 717.3.2 節を参照してください。O17.997-SOR Value<要件 ID: “Field: xx.997-SOR” および “Field: xx.997-SOR-SRN” および
“Field: xx.997-SOR-RSP” を参照してください。>
t-2
Field: 17.998-Geographic Sample Acquisition Location Value8.17.41, Table 717.7.3 節を参照してください。O17.998-GEO Value<要件 ID: “Field: Geographic”, “Field: Geographic-Conditional”, “Field: Geographic-Subfield 1” through “Field: Geographic-Values-SubField 15” を参照してください。>t-2
Field: 17.999-Image Data Valid8.17.42, Table 71これは必須のフィールドで、画像を含みます。
<画像メタデータが有効かどうかを確認します。>
2M17.999-DATA Uncompressed ValidIF {17.011} EQ ASCII(NONE) THEN Length(17.999) EQ 17.006} * {17.007}B
2M17.999-DATA JP2,JP2L ValidIF {17.011} EQ ASCII(JP2) OR ASCII(JP2L) THEN Present(SigBox,
HeadBox,
ImgBox)
t-11B
2M17.999-DATA PNG ValidIF {17.011} EQ ASCII(PNG) THEN
Present(PNGSig,
IHDR,
IDAT,
IEND)
t-11B

Table C.16 - Assertions for Annex B - Traditional Encoding

表 C.16 - Annex B(Traditional エンコーディング)のアサーション

Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Annex B: Traditional Encoding
Traditional-Field: xx.001-Length, FirstAnnex BThe first field in all records shall be labeled as field ”1” and contain the length in bytes of the record.MTraditional: xx.001-Length, First<See Requirement ID: “Field: xx.001-Record Header”.>t-2
Traditional-Field: xx.002-IDCAnnex BWith the exception of the Type-1 record (See Section 8.1), the second field shall be labeled as field Type-1 record (See ed as field ueesignation character (IDC). See Section 7.3.1.MTraditional: xx.002-IDC<See Requirement ID: “Field: xx.002-IDC”.>t-2
Traditional-Record: Type1-7-bit ASCIIAnnex BThe data in the Type-1 record shall always be recorded in variable length fields using the 7-bit American Standard Code for Information Interchange (ASCII) as described in ISO/IEC 64656. For purposes of compatibility, the eighth (leftmost) bit shall contain a value of zero. All field numbers and information separators shall be recorded in 7-bit ASCII as described in ISO/IEC 646.MTraditional: Type-1-ASCII<See Requirement ID: “Record: Type1-ASCII”>t-2
Traditional-Field: xx.001, xx.002, xx.999 OrderedAnnex BTextual fields in Record Types 10-99 may occur in any order after the first two fields and contain the information as described for that particular numbered field, except for field 999, which shall be the concluding field, when it is included in a record.MTraditional: xx.001-First<See Requirement ID: “Field: xx.001-Record Header”.>t-2
MTraditional: xx.002-Second<See Requirement ID: “Field: xx.002-IDC”.>t-2
1MTraditional: xx.999-LastForEach(Record in Transaction ST Type(Record) NEQ 4 OR 8)
{
FieldNumber(Last(Field in Record)) EQ 999
}
T
Traditional-Transaction: SeparatorsAnnex B, Table 90In the Type-1, Type-2, Type-9 through Type-99 records, information is delimited by the four ASCII information separators. The delimited information may be items1MTraditional: Separators FSForEach(Record in Transaction ST Type(Record) MO [1,2,9 to 99])
{
Last(Byte in Record) EQ 0x1C
}
T
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Annex B: Traditional Encoding
Traditional-Field: xx.001-Length, FirstAnnex Bすべてのレコードの最初のフィールドは、フィールド「1」とラベル付けされ、レコードの長さをバイト単位で含まなければなりません。MTraditional: xx.001-Length, First<要件 ID: “Field: xx.001-Record Header”. を参照してください。>t-2
Traditional-Field: xx.002-IDCAnnex BType-1 レコード(8.1 節を参照)を除き、2 番目のフィールドは指定文字(IDC)フィールドとしてラベル付けされなければなりません。7.3.1 節を参照してください。MTraditional: xx.002-IDC<要件 ID: “Field: xx.002-IDC”. を参照してください。>t-2
Traditional-Record: Type1-7-bit ASCIIAnnex BType-1 レコードのデータは、ISO/IEC 64656 に記載された 7 ビットの American Standard Code for Information Interchange (ASCII) を使用して、常に可変長フィールドに記録されなければなりません。互換性のため、8 番目(最上位)のビットは値 0 を含まなければなりません。すべてのフィールド番号と情報セパレーターは、ISO/IEC 646 に記載された 7 ビット ASCII で記録されなければなりません。MTraditional: Type-1-ASCII<要件 ID: “Record: Type1-ASCII”> を参照してください。t-2
Traditional-Field: xx.001, xx.002, xx.999 OrderedAnnex BRecord Types 10〜99 のテキストフィールドは、最初の 2 つのフィールドの後に任意の順序で現れてもよく、その番号のフィールドについて記載された情報を含みます。ただし、フィールド 999 は、レコードに含まれる場合、最後のフィールドでなければなりません。MTraditional: xx.001-First<要件 ID: “Field: xx.001-Record Header”. を参照してください。>t-2
MTraditional: xx.002-Second<要件 ID: “Field: xx.002-IDC”. を参照してください。>t-2
1MTraditional: xx.999-LastForEach(Record in Transaction ST Type(Record) NEQ 4 OR 8)
{
FieldNumber(Last(Field in Record)) EQ 999
}
T
Traditional-Transaction: SeparatorsAnnex B, Table 90Type-1、Type-2、Type-9〜Type-99 のレコードでは、情報は 4 つの ASCII 情報セパレーターで区切られます。区切られる情報は、次のものである場合があります1MTraditional: Separators FSForEach(Record in Transaction ST Type(Record) MO [1,2,9 to 99])
{
Last(Byte in Record) EQ 0x1C
}
T
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
within a field or subfield, fields within a logical record, or multiple occurrences of subfields.1MTraditional: Separators GS<Not directly tested. The GS separator is used when parsing fields within a record.>t-13
1MTraditional: Separators RS,US<Not directly tested. The RS and US separators are used when parsing subfields and information items.>t-13
Traditional-Transaction: FS SeparatorAnnex BMultiple records within a transaction are separated by the “FS” character, which signals the end of a logical record.MTraditional: FS Separator<See Requirement ID: “Traditional-Transaction: Separators”.>t-2
Traditional-Transaction: US, RS, GS, SeparatorsAnnex BThe “USe x Bonal-Transaction: US, RS, iple items within a field or subfield; the “RShin a field or subfield; the , ipleSeparatorsated the “GSeleSeparatorsated ated ; the , ipleSeparatorsaMTraditional: US, RS, GS Separators<See Requirement ID: “Traditional-Transaction: Separators”.>t-2
Traditional-Transaction: Data Length MinimumB.1Each information item, subfield, field, and logical record shall contain one or more bytes of data1MTraditional: Data Length Minimum<This assertion is testing during the Character Count and Byte Length testing for each Record Type, which test for 1 byte of data at a minimum. See the following Type-10 Requirement ID’s as an example:
Field: Type10-CharCount and
Field: Type10-Subfield CharCount .>
t-2
Traditional-Transaction: Big-EndianB.1.1Within a file, the order for transmission of both the ASCII and the binary representations of bytes shall be most significant byte first and least significant byte last otherwise referred to as Big-Endian format. Within a byte, the order of transmission shall be the most significant bit first and the least significant bit last.2MTraditional: Data Big-Endian<Not directly tested. However, the parsing methods use the Big-Endian format when processing transactions.>t-13
Traditional-Transaction: Date FormatB.1.2Dates shall appear as eight digits in the format YYYYMMDD. The YYYY characters shall represent the year of the transaction; the MM characters shall be the tens and units values of the month; and the DD characters shall be the day in the month.1MTraditional: Date Format<This assertion is tested for each field or subfield that requires a date entry. For example, see Requirement ID “Field: 1.005-Local Date Value”.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
フィールドまたはサブフィールド内の項目、論理レコード内のフィールド、またはサブフィールドの複数の出現です。1MTraditional: Separators GS<直接は試験しません。GS セパレーターは、レコード内のフィールドを構文解析する際に使用されます。>t-13
1MTraditional: Separators RS,US<直接は試験しません。RS および US セパレーターは、サブフィールドおよび情報項目を構文解析する際に使用されます。>t-13
Traditional-Transaction: FS SeparatorAnnex Bトランザクション内の複数のレコードは、論理レコードの終わりを示す「FS」文字で区切られます。MTraditional: FS Separator<要件 ID: “Traditional-Transaction: Separators”. を参照してください。>t-2
Traditional-Transaction: US, RS, GS, SeparatorsAnnex BUS セパレーターはフィールドまたはサブフィールド内の複数の項目を区切り、RS セパレーターは…を区切り、GS セパレーターは…を区切ります。MTraditional: US, RS, GS Separators<要件 ID: “Traditional-Transaction: Separators”. を参照してください。>t-2
Traditional-Transaction: Data Length MinimumB.1各情報項目、サブフィールド、フィールド、および論理レコードは、1 バイト以上のデータを含まなければなりません1MTraditional: Data Length Minimum<このアサーションは、各レコードタイプの Character Count および Byte Length の試験の中で試験されます。これらの試験は、最低 1 バイトのデータがあることを試験します。例として、次の Type-10 の要件 ID を参照してください。
Field: Type10-CharCount および
Field: Type10-Subfield CharCount .>
t-2
Traditional-Transaction: Big-EndianB.1.1ファイル内では、ASCII 表現とバイナリ表現のどちらのバイトも、最上位バイトを先頭、最下位バイトを最後として伝送されなければならず、これはビッグエンディアン形式とも呼ばれます。バイト内では、最上位ビットを先頭、最下位ビットを最後として伝送されなければなりません。2MTraditional: Data Big-Endian<直接は試験しません。ただし、構文解析の方法は、トランザクションを処理する際にビッグエンディアン形式を使用します。>t-13
Traditional-Transaction: Date FormatB.1.2日付は、YYYYMMDD の形式の 8 桁で表示されなければなりません。YYYY の文字はトランザクションの年を表さなければならず、MM の文字は月の十の位と一の位の値、DD の文字は月の日でなければなりません。1MTraditional: Date Format<このアサーションは、日付の入力を必要とする各フィールドまたはサブフィールドについて試験されます。例として、要件 ID “Field: 1.005-Local Date Value” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Traditional-Field: Agency Code Subfield 2B.1.3The 2007 version of the standard included only the first information item in agency code fields (See Section 7.6). New to this version, a second, optional, information item is allowed in Traditional encoding in order to maintain consistency with the 2008 version of the standard.MTraditional: Agency Code Subfield 2<See Requirement ID: “Field: Agency Codes”.>
Traditional-Transaction: GMT/UTCB.1.4GMT/UTC shall be represented as YYYYMMDDHHMMSSZ, a 15-character string that is the concatenation of the date with the time and concludes with the character nal enco YYYY characters shall represent the year of the transaction. The MM characters shall be the tens and units values of the month. The DD characters shall be the tens and units values of the day of the month. The HH characters represent the hour; the MM the minute; and the SS represents the second.MTraditional: GMT/UTC<This assertion is tested for each field or subfield that requires a GMT/UTC entry. For example, see Requirement ID “Field: Geographic-Subfield 1”.>t-2
Traditional-Transaction: Field NumberingB.1.5For the Type-1, Type-2, Type-9 through Type-99 records, each information field that is used shall be numbered in accordance with this standard. The format for each field shall consist of the logical record type number followed by a period rmat for each field followed by a colon al record type number followed by a pepriate to that field. The field number may be any one to nine-digit number occurring between the period field. The colon may be any one to nine-digit number occurring betweeneld number. This implies that a field number of y one to nine-digit numberand shall be interpreted in the same manner as a field number of “2.000000123:.1MTraditional: Field Numbering<Not directly tested. However, the parsing methods use the described format when processing transactions.>t-13
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Traditional-Field: Agency Code Subfield 2B.1.3規格の 2007 年版では、機関コードのフィールド(7.6 節を参照)に最初の情報項目のみが含まれていました。このバージョンで新たに、2008 年版の規格との一貫性を保つため、Traditional エンコーディングで 2 番目の任意の情報項目が認められます。MTraditional: Agency Code Subfield 2<要件 ID: “Field: Agency Codes”. を参照してください。>
Traditional-Transaction: GMT/UTCB.1.4GMT/UTC は、YYYYMMDDHHMMSSZ として表されなければなりません。これは日付と時刻を連結した 15 文字の文字列で、末尾は文字 Z です。YYYY の文字はトランザクションの年を表します。MM の文字は月の十の位と一の位の値を表します。DD の文字は月の日の十の位と一の位の値を表します。HH の文字は時、MM は分、SS は秒を表します。MTraditional: GMT/UTC<このアサーションは、GMT/UTC の入力を必要とする各フィールドまたはサブフィールドについて試験されます。例として、要件 ID “Field: Geographic-Subfield 1” を参照してください。>t-2
Traditional-Transaction: Field NumberingB.1.5Type-1、Type-2、Type-9〜Type-99 のレコードでは、使用される各情報フィールドは、この規格に従って番号付けされなければなりません。各フィールドの形式は、論理レコードタイプ番号の後にピリオドを置き、その後にフィールドに適切なフィールド番号を続け、最後にコロンを置きます。フィールド番号は、ピリオドとコロンの間に現れる 1〜9 桁の任意の数であってもかまいません。したがって、1 桁のフィールド番号は、「2.000000123:」のようなフィールド番号と同じ方法で解釈されなければなりません。1MTraditional: Field Numbering<直接は試験しません。ただし、構文解析の方法は、トランザクションを処理する際に記載された形式を使用します。>t-13
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Traditional-Record: Types 1,2,9 ASCIIB.1.5Logical Type-1, Type-2, and Type-9 records contain only ASCII textual data fields. The ASCII File Separator ment ID a fields. The (signifying the end of the logical record or transaction) shall follow the last byte of ASCII information and shall be included in the length of the record.MTraditional: Type1-ASCII<See Requirement ID: “Record: Type1-ASCII”.>t-2
1MTraditional: Types 2,9-ASCIIForEach(Field in Record ST Type(Record) EQ 2 OR 9)
{
{Bytes(Field)} MO [0x02, 0x03, 0x1C to 0x7E]
}
T
MTraditional: Types 1,2,9-FS Separator<See Requirement ID: “Traditional-Transaction: Separators”.>t-2
Traditional-Record: Types 4,8 BinaryB.1.5The Record Type-4: Grayscale fingerprint image and the Record Type-8: Signature image record contain only binary data recorded as ordered fixed-length binary fields. The entire length of the record shall be recorded in the first four-byte binary field of each record. For these binary records, neither the record number with its period, nor the field identifier number and its following colon, shall be recorded. Furthermore, as all the field lengths of these six records are either fixed and specified, none of the four separato characters (“US”, “RS”,” GS”, or “FS”) shall be interpreted as anything other than binary data. For these binary records, the ”FS” character shall not be used as a record separator or transaction terminating character.MTraditional: Type4-Binary<See Requirement ID: “Field: Type4-CharType”.>t-2
MTraditional: Type8-Binary<The test assertions for this type may not be supported in this version of the CTM. If they are supported, they are included under field testing for Record Type-8: Signature image record.>t-2
Traditional-Record: Types 10 to 99 FormatB.1.5The Type-10 through Type-99 records combine ASCII fields with a single binary sample field. Each ASCII field contains a numeric field identifier and its descriptive data. When Field 999 is present in a record it shall appear as the last entry in the record and shall contain the data placed immediately following the colon (er and its descriptive data. When record length field shall contain the length of theMTraditional: Types 10 to 99, xx.999 last<See Requirement ID: “Traditional-Field: xx.001, xx.002, xx.999 Ordered” .>t-2
MTraditional: Types 10 to 99, Record Length<See Requirement ID: “Field: xx.001-Record Header”.>t-2
MTraditional: Types 10 to 99, FS Separator<See Requirement ID: “Traditional-Transaction: Separators”.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Traditional-Record: Types 1,2,9 ASCIIB.1.5論理 Type-1、Type-2、および Type-9 レコードには、ASCII のテキストデータフィールドのみが含まれます。ASCII の File Separator(論理レコードまたはトランザクションの終わりを示します)は、ASCII 情報の最後のバイトの後に続き、レコードの長さに含まれなければなりません。MTraditional: Type1-ASCII<要件 ID: “Record: Type1-ASCII”.> を参照してください。t-2
1MTraditional: Types 2,9-ASCIIForEach(Field in Record ST Type(Record) EQ 2 OR 9)
{
{Bytes(Field)} MO [0x02, 0x03, 0x1C to 0x7E]
}
T
MTraditional: Types 1,2,9-FS Separator<要件 ID: “Traditional-Transaction: Separators”.> を参照してください。t-2
Traditional-Record: Types 4,8 BinaryB.1.5Record Type-4: Grayscale fingerprint image および Record Type-8: Signature image record には、順序付けられた固定長のバイナリフィールドとして記録されたバイナリデータのみが含まれます。各レコードの最初の 4 バイトのバイナリフィールドには、レコード全体の長さを記録しなければなりません。これらのバイナリレコードでは、ピリオド付きのレコード番号も、フィールド識別子番号とそれに続くコロンも記録してはなりません。さらに、これら 6 つのレコードのすべてのフィールド長は固定で規定されているため、4 つのセパレーター文字(「US」「RS」「GS」「FS」)はバイナリデータ以外のものとして解釈してはなりません。これらのバイナリレコードでは、「FS」文字をレコードセパレーターまたはトランザクション終端文字として使用してはなりません。MTraditional: Type4-Binary<要件 ID: “Field: Type4-CharType”.> を参照してください。t-2
MTraditional: Type8-Binary<このタイプの試験アサーションは、CTM のこのバージョンではサポートされない場合があります。サポートされる場合は、Record Type-8: Signature image record のフィールド試験に含まれます。>t-2
Traditional-Record: Types 10 to 99 FormatB.1.5Type-10〜Type-99 のレコードは、ASCII フィールドと 1 つのバイナリサンプルフィールドを組み合わせます。各 ASCII フィールドは、数値のフィールド識別子とその記述データを含みます。フィールド 999 がレコードに含まれる場合、それはレコードの最後のエントリーとして現れ、コロンの直後に置かれたデータを含まなければなりません。…レコード長フィールドには、MTraditional: Types 10 to 99, xx.999 last<要件 ID: “Traditional-Field: xx.001, xx.002, xx.999 Ordered” .> を参照してください。t-2
MTraditional: Types 10 to 99, Record Length<要件 ID: “Field: xx.001-Record Header”.> を参照してください。t-2
MTraditional: Types 10 to 99, FS Separator<要件 ID: “Traditional-Transaction: Separators”.> を参照してください。t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
record. The ASCII File Separator “FS”control character shall follow the last byte of the compressed or uncompressed sample data. The “FS” character shall signify the end of the logical record or transaction and shall be included as part of the record length.
Traditional-Transaction: Base 64B.1.5The Base-64 encoding scheme (See Annex A: Character encoding information) shall be used for converting non-ASCII text into ASCII form. The field number including the period and colon, for example II text into ASCII form. The “US”, “RS”, “GS”, and “FS” information separators shall appear in the transaction as 7-bit ASCII characters without conversion to Base-64 encoding.Traditional: Base 64<Not tested.>t-4
Traditional-Transaction: Encoding SetsB.1.6In order to effect data and transaction interchanges between non-English speaking or foreign-based agencies, a technique is available to encode information using character encoding sets other than 7-bit ASCII.Traditional: Additional Encoding Sets<Not Tested.>t-4
Traditional-Field: 1.001 Record HeaderB.2.1Field 1.001 Record header shall begin with d header ecordode is renamed UTF-16, a record including every character of every field contained in the record and the information separators. The cter of every field contained in the record and theng setsField 1.001 from the next field.MTraditional: 1.001-Record Length<See Requirement ID “Field: xx.001-Record Header”>t-2
MTraditional: 1.001-GS Separator<See Requirement ID: “Traditional-Transaction: Separators”.>t-2
Traditional-Field: 1.005 Date FormatB.2.1The year, month, and day values in Field 1.005 Date / DAT are concatenated “YYYYMMDD”MTraditional: 1.005-Date Format<See Requirement ID “Field: 1.005-Local Date Value”.>t-2
Traditional-Field: 1.013 DOMB.2.1In Field 1.013 Domain name / DOM, the default is “1.013:NORAM‘US’‘GS’”Traditional: 1.013-DOM<Not Tested.>t-3
Traditional-B.2.1Immediately following the lastMTraditional:<See Requirement ID: “Traditional-Transaction:t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
レコードの長さを含めなければなりません。ASCII の File Separator「FS」制御文字は、圧縮または非圧縮のサンプルデータの最後のバイトの後に続かなければなりません。「FS」文字は、論理レコードまたはトランザクションの終わりを示し、レコード長の一部として含まれなければなりません。
Traditional-Transaction: Base 64B.1.5Base-64 エンコーディング方式(附属書 A: Character encoding information を参照)は、非 ASCII テキストを ASCII 形式に変換するために使用されなければなりません。ピリオドとコロンを含むフィールド番号、たとえば…。「US」「RS」「GS」「FS」の情報セパレーターは、Base-64 エンコーディングへの変換なしに、7 ビット ASCII 文字としてトランザクションに現れなければなりません。Traditional: Base 64<試験しません。>t-4
Traditional-Transaction: Encoding SetsB.1.6英語を使用しない機関や外国の機関との間でデータおよびトランザクションを交換するために、7 ビット ASCII 以外の文字エンコーディングセットを使って情報を符号化する手法を利用できます。Traditional: Additional Encoding Sets<試験しません。>t-4
Traditional-Field: 1.001 Record HeaderB.2.1フィールド 1.001 Record header は、…で始まらなければなりません。…レコードに含まれるすべてのフィールドのすべての文字と情報セパレーターを含めます。…フィールド 1.001 を次のフィールドから区切ります。MTraditional: 1.001-Record Length<要件 ID “Field: xx.001-Record Header” を参照してください。>t-2
MTraditional: 1.001-GS Separator<要件 ID: “Traditional-Transaction: Separators”.> を参照してください。t-2
Traditional-Field: 1.005 Date FormatB.2.1フィールド 1.005 Date / DAT の年、月、日の値は、「YYYYMMDD」として連結されます。MTraditional: 1.005-Date Format<要件 ID “Field: 1.005-Local Date Value”.> を参照してください。t-2
Traditional-Field: 1.013 DOMB.2.1フィールド 1.013 Domain name / DOM では、デフォルトは「1.013:NORAM‘US’‘GS’」です。Traditional: 1.013-DOM<試験しません。>t-3
Traditional-B.2.1Type-1 レコードの最後のMTraditional:<要件 ID: “Traditional-Transaction:t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
Transaction: FS Separator Replaces GSinformation item in the Type-1 record (See Section 8.1), an tFSFSn 8.1 following the last information item in the from the next logical record. This “FS” character shall replace the “GS” character that is normally used between information fields. This is the case with all Record Types.FS Replaces GSSeparators”.>
Traditional-Record: Type4-Fields FixedB.2.2The order of fields for Type-4 records is fixed. All fields and data in this record type shall be recorded as binary information.2MTraditional: Type4 Fields Fixed<Not tested directly, but Type 4 is parsed as unnumbered binary data>.t-13
Traditional-Record: Type7-Requirements TBDB.2.3<This section contains requirements regarding Type-7 records. If this type is supported by the CTM, the requirements will be added.>-Traditional: Type7 Assertions TBD<This section contains requirements regarding Type-7 records. If this type is supported by the CTM, the assertions will be added.>t-15
Traditional-Record: Type8-Requirements TBDB.2.4<This section contains requirements regarding Type-8 records. If this type is supported by the CTM, the requirements will be added.>-Traditional: Type8 Assertions TBD<This section contains requirements regarding Type-8 records. If this type is supported by the CTM, the assertions will be added.>t-15
Traditional-Record: Type9-Requirements TBDB.2.5<This section contains requirements regarding Type-9 records. If this type is supported by the CTM, the requirements will be added.>-Traditional: Type9 Assertions TBD<This section contains requirements regarding Type-9 records. If this type is supported by the CTM, the assertions will be added.>t-15
Traditional-Fields 10.029, 10.032 Feature PointsB.2.6For facial feature points (Field 10.029: 2D Facial feature points / FFP and Field 10.032: 3D facial feature points/ 3DF), the first information item is followed by “US” separator character. The second information item is feature point code, followed by “US”. The third is the X coordinate, followed by USem is feature point code, followed byrtedal Field 10.032, the fifth information item is the Z coordinate. Each feature block shallOTraditional: 10.029, 10.032 Feature Points<See Requirement IDs: “Field: 10.029- 2D Facial Feature Points Value” and “Field: 10.032- 3D Facial Feature Points Value”.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
Transaction: FS Separator Replaces GS情報項目(8.1 節を参照)の直後に、「FS」…が置かれ、…次の論理レコードと区切られます。この「FS」文字は、情報フィールド間で通常使用される「GS」文字に置き換わります。これはすべてのレコードタイプに当てはまります。FS Replaces GSSeparators” を参照。>
Traditional-Record: Type4-Fields FixedB.2.2Type-4 レコードのフィールドの順序は固定です。このレコードタイプのすべてのフィールドとデータは、バイナリ情報として記録されなければなりません。2MTraditional: Type4 Fields Fixed<直接は試験しませんが、Type 4 は番号なしのバイナリデータとして構文解析されます。>t-13
Traditional-Record: Type7-Requirements TBDB.2.3<このセクションは、Type-7 レコードに関する要件を含みます。このタイプが CTM でサポートされる場合、要件が追加されます。>-Traditional: Type7 Assertions TBD<このセクションは、Type-7 レコードに関する要件を含みます。このタイプが CTM でサポートされる場合、アサーションが追加されます。>t-15
Traditional-Record: Type8-Requirements TBDB.2.4<このセクションは、Type-8 レコードに関する要件を含みます。このタイプが CTM でサポートされる場合、要件が追加されます。>-Traditional: Type8 Assertions TBD<このセクションは、Type-8 レコードに関する要件を含みます。このタイプが CTM でサポートされる場合、アサーションが追加されます。>t-15
Traditional-Record: Type9-Requirements TBDB.2.5<このセクションは、Type-9 レコードに関する要件を含みます。このタイプが CTM でサポートされる場合、要件が追加されます。>-Traditional: Type9 Assertions TBD<このセクションは、Type-9 レコードに関する要件を含みます。このタイプが CTM でサポートされる場合、アサーションが追加されます。>t-15
Traditional-Fields 10.029, 10.032 Feature PointsB.2.6顔特徴点(Field 10.029: 2D Facial feature points / FFP および Field 10.032: 3D facial feature points/ 3DF)では、最初の情報項目の後に「US」セパレーター文字が続きます。2 番目の情報項目は特徴点コードで、その後に「US」が続きます。3 番目は X 座標で、その後に「US」が続きます。…Field 10.032 では、5 番目の情報項目は Z 座標です。各特徴ブロックはOTraditional: 10.029, 10.032 Feature Points<要件 ID: “Field: 10.029- 2D Facial Feature Points Value” and “Field: 10.032- 3D Facial Feature Points Value”. を参照。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
be separated by the tRSn item is the Z coordi
Traditional-Transaction: Type11-ReservedB.2.7This Record Type is reserved for future use as Voice data.MTraditional: Type11-Reserved<See Requirement ID: “Transaction: Reserved Records”.>t-2
Traditional-Transaction: Type12-ReservedB.2.8This Record Type is reserved for future use as Dental data.MTraditional: Type12-Reserved<See Requirement ID: “Transaction: Reserved Records”.>t-2
Traditional-Field: 13.014 RS SeparatedB.2.9For Field 13.014: Search position descriptors / SPD, multiple portions of the EJI may be listed and separated by the ”RS” character.MTraditional: 13.014-RS Separated<See Requirement ID:
“Field: SPD,PPD Values .>
t-2
Traditional-Field: 13.015 SubfieldsB.2.9For Field Field 13.015: Print position coordinates / PPC, the six information items within the field are separated by five sUS PPCDDental data.SUblock shall belowed by tedal definitions may be repeated as subfields separated by the dRSblock shallMTraditional: 13.015-Subfields<See Requirement ID:
“Field: PPC-Subfield Occurrences”.>
t-2
Traditional-Field: 13.024 SubfieldsB.2.9Field Field 13.024: Latent quality metric / LQM may contain one or more subfields, each consisting of four information items separated by the”US” character. The subfield may be repeated for each latent image and quality algorithm used, separated by the “RS” character.MTraditional: 13.024-Subfields<See Requirement IDs: “Field: Sample Quality Occurrences” to
“Field: Sample Quality Additional Subfield”.>
t-2
Traditional-Field: 14.025 FormatB.2.10Field 14.025: Alternate finger segment position(s) / ASEG shall consist of one to four subfields. Each subfield shall consist of a finger number between 1 and 10, or 16 or 17; the total number of vertices of the polygon encompassing the finger; and the set of consecutive vertices. Each vertex shall be represented as horizontal and vertical pixel offsets relative to the origin positioned in the upper left cornerMTraditional: 14.025-Format<See Requirement ID: “Field: 14.025-Alternate Finger Segment Position(s) Value” and “Field: Type14-Subfield Occurrence”.>t-2
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
「RS」で区切られなければなりません。…項目は Z 座標…
Traditional-Transaction: Type11-ReservedB.2.7このレコードタイプは、音声データ用として将来の使用のために予約されています。MTraditional: Type11-Reserved<要件 ID: “Transaction: Reserved Records” を参照してください。>t-2
Traditional-Transaction: Type12-ReservedB.2.8このレコードタイプは、歯科データ用として将来の使用のために予約されています。MTraditional: Type12-Reserved<要件 ID: “Transaction: Reserved Records” を参照してください。>t-2
Traditional-Field: 13.014 RS SeparatedB.2.9Field 13.014: Search position descriptors / SPD では、EJI の複数の部分を列挙し、「RS」文字で区切ってもよいです。MTraditional: 13.014-RS Separated<要件 ID:
“Field: SPD,PPD Values” を参照してください。>
t-2
Traditional-Field: 13.015 SubfieldsB.2.9Field 13.015: Print position coordinates / PPC では、フィールド内の 6 つの情報項目は 5 つの「US」文字で区切られます。…定義は、「RS」で区切られたサブフィールドとして繰り返される場合があります…MTraditional: 13.015-Subfields<要件 ID:
“Field: PPC-Subfield Occurrences” を参照してください。>
t-2
Traditional-Field: 13.024 SubfieldsB.2.9Field 13.024: Latent quality metric / LQM は、1 つ以上のサブフィールドを含んでもよく、各サブフィールドは「US」文字で区切られた 4 つの情報項目で構成されます。サブフィールドは、使用した遺留画像と品質アルゴリズムごとに繰り返してもよく、「RS」文字で区切られます。MTraditional: 13.024-Subfields<要件 ID: “Field: Sample Quality Occurrences” から
“Field: Sample Quality Additional Subfield” までを参照してください。>
t-2
Traditional-Field: 14.025 FormatB.2.10Field 14.025: Alternate finger segment position(s) / ASEG は、1〜4 個のサブフィールドで構成されなければなりません。各サブフィールドは、1〜10、または 16 か 17 の指番号、指を囲む多角形の頂点の総数、および連続する頂点の集合で構成されなければなりません。各頂点は、左上隅に置かれた原点を基準とする水平方向および垂直方向の画素オフセットで表されなければなりません。MTraditional: 14.025-Format<要件 ID: “Field: 14.025-Alternate Finger Segment Position(s) Value” および “Field: Type14-Subfield Occurrence” を参照してください。>t-2
Requirement IDReference in Base StandardRequirement SummaryLevelStatusAssertion IDTest AssertionTest NoteImplementation SupportSupported RangeTest ResultApplicability
of the image. The horizontal offsets (X) are the pixel counts to the right, and the vertical offsets (Y) are the pixel counts down from the origin. A minimum of three points is required to describe a finger location. A rom the origin. A minimum of three points is required to describe a finger location. A uUSed to describe ainimum of three points is requir number, the number of vertices, each X coordinate, and each Y coordinate. Subfields representing each finger are delimited by the g each fingerd each Y coo
Traditional-Field: 19.018 Requirements TBDB.2.15Field 19.018: Friction ridge - plantar segment position(s) / FSP shall consist of one to four subfields. Each subfield shall consist of a plantar number between 1 and 10, the total number of vertices of the polygon encompassing the plantar, and the set of consecutive vertices. Each vertex shall be represented as horizontal and vertical pixel offsets relative to the origin positioned in the upper left corner of the image. The horizontal offsets (X) are the pixel counts to the right, and the vertical offsets (Y) are the pixel counts down from the origin. A minimum of three points is required to describe a plantar location. A “USom the origin. A minimum of three points is required to dethe number of vertices, each X coordinate, and each Y coordinate. Subfields representing each plantar are delimited by the orSinate, and each Y coor-Traditional: 19.018 Assertions TBD<This section contains requirements regarding Type-19 records. If this type is supported by the CTM, the assertions will be added.>t-15
要件 ID基本規格での参照箇所要件の概要レベルステータスアサーション ID試験アサーション試験ノート実装サポートサポート範囲試験結果適用性
(左上隅は画像の左上隅です。)水平方向のオフセット (X) は右方向の画素数、垂直方向のオフセット (Y) は原点から下方向の画素数です。指の位置を記述するには、最低 3 点が必要です。各サブフィールドは、指番号、頂点の数、各 X 座標、および各 Y 座標を用いて記述されます。各指を表すサブフィールドは「RS」で区切られます。
Traditional-Field: 19.018 Requirements TBDB.2.15Field 19.018: Friction ridge - plantar segment position(s) / FSP は、1〜4 個のサブフィールドで構成されなければなりません。各サブフィールドは、1〜10 の足底番号、足底を囲む多角形の頂点の総数、および連続する頂点の集合で構成されなければなりません。各頂点は、画像の左上隅に置かれた原点を基準とする水平方向および垂直方向の画素オフセットで表されなければなりません。水平方向のオフセット (X) は右方向の画素数、垂直方向のオフセット (Y) は原点から下方向の画素数です。足底の位置を記述するには、最低 3 点が必要です。各サブフィールドは、足底番号、頂点の数、各 X 座標、および各 Y 座標を用いて記述されます。各足底を表すサブフィールドは「RS」で区切られます。-Traditional: 19.018 Assertions TBD<このセクションは、Type-19 レコードに関する要件を含みます。このタイプが CTM でサポートされる場合、アサーションが追加されます。>t-15

C.4 Test Notes

C.4 試験ノート

The following test notes provide clarification of the assertion text included in the Test Assertion columns. The test notes contain various types of information including:

次の試験ノートは、試験アサーション列に含まれるアサーションの文言を補足説明するものです。試験ノートには、次のようなさまざまな種類の情報が含まれます。

•Additional information to help clarify complex assertions such as image metadata and IDC comparisons.

•画像メタデータや IDC の比較など、複雑なアサーションを明確にするための追加情報。

•Explanations of decisions made when the base standard is not clear or contains possible discrepancies.

•基本規格が明確でない場合、または矛盾の可能性を含む場合に行った判断の説明。

•“Exception” which refers to any AN-2011 requirement that does not have an associated assertion defined in this document.

•「例外」。この文書でアサーションが定義されていない AN-2011 の要件を指します。

t-1. Semantic (Level 3) assertions are not included in the tables except to intentionally clarify that the assertion is L3. An explanation may be given explaining why the assertion is considered L3.

t-1. セマンティック(Level 3)のアサーションは、そのアサーションが L3 であることを意図的に明確にする場合を除き、表に含まれません。そのアサーションが L3 とみなされる理由を説明する場合があります。

t-2. The assertions for this requirement are listed in another section of a table as described in the “Test Assertion” column.

t-2. この要件のアサーションは、「試験アサーション」列に記載されているとおり、表の別のセクションに列挙されています。

t-3. Assertions related to Domain Names and Application Profile Specifications are not addressed in the tables.

t-3. ドメイン名およびアプリケーションプロファイル仕様に関連するアサーションは、表では扱いません。

t-4. Assertions related to Character Sets other than 7-bit ASCII or binary are not addressed in the tables.

t-4. 7 ビット ASCII またはバイナリ以外の文字セットに関連するアサーションは、表では扱いません。

t-5. Refer to the IDC tables below to determine the test output based upon the types being compared for matching IDCs.

t-5. 一致する IDC について比較されるタイプに基づく試験の出力を判断するには、以下の IDC の表を参照してください。

Table C-16 - IDC ID Location Comparison

表 C-16 - IDC ID の位置の比較

IDC: ID Location Comparison
Record TypeField 10.003BiometricField For Comparison ID
4NAFINGERByte 1 of 4.004
10FACEFACENA
10SCARSCAR(1,1) of 10.040
10MARKMARK(1,1) of 10.040
10TATTOOTATTOO(1,1) of 10.040
13NAFINGER(1,1) of 13.013
14NAFINGER(1,1) of 14.013
17NAIRIS17.003 IF 17.003 = 1 Or 2
IDC: ID の位置の比較
レコードタイプField 10.003生体情報比較用 ID のフィールド
4NAFINGERByte 1 of 4.004
10FACEFACENA
10SCARSCAR(1,1) of 10.040
10MARKMARK(1,1) of 10.040
10TATTOOTATTOO(1,1) of 10.040
13NAFINGER(1,1) of 13.013
14NAFINGER(1,1) of 14.013
17NAIRIS17.003 IF 17.003 = 1 Or 2

Table C-17 - IDC Comparison Results

表 C-17 - IDC の比較結果

IDC: Comparison Results
First RecordSecond RecordComparison IDsResult
FINGERFINGERSameOk
FINGERFINGERDifferentError
FINGERNEQFINGERNAError
FACEFACENAOk
FACENEQ FACENAError
IRISIRISBoth = 1 Or Both = 2Ok
IRISIRISNot (Both = 1 Or Both = 2)Error
IRISNEQ IRISNAError
SCARSCARSameOk
SCARSCARDifferentWarning
SCARMARK Or TATTOOSame or DifferentWarning
SCARFINGER, FACE Or IRISNAError
MARKMARKSameOk
MARKMARKDifferentWarning
MARKSCAR Or TATTOOSame or DifferentWarning
MARKFINGER, FACE Or IRISNAError
TATTOOTATTOOSameOk
TATTOOTATTOODifferentWarning
TATTOOSCAR Or MARKSame or DifferentWarning
TATTOOFINGER, FACE Or IRISNAError
IDC: 比較結果
最初のレコード2 番目のレコード比較する ID結果
FINGERFINGER同一Ok
FINGERFINGER異なるError
FINGERNEQFINGERNAError
FACEFACENAOk
FACENEQ FACENAError
IRISIRISBoth = 1 Or Both = 2Ok
IRISIRISNot (Both = 1 Or Both = 2)Error
IRISNEQ IRISNAError
SCARSCAR同一Ok
SCARSCAR異なるWarning
SCARMARK Or TATTOO同一または異なるWarning
SCARFINGER, FACE Or IRISNAError
MARKMARK同一Ok
MARKMARK異なるWarning
MARKSCAR Or TATTOO同一または異なるWarning
MARKFINGER, FACE Or IRISNAError
TATTOOTATTOO同一Ok
TATTOOTATTOO異なるWarning
TATTOOSCAR Or MARK同一または異なるWarning
TATTOOFINGER, FACE Or IRISNAError

t-6. UTC has replaced GMT. Date and time are defined in section 7.7.2 of the standard. The set of values ValidUTC/GMT is described in section 7.7.2.2 of the standard and is always less than the current date and time. ValidUTC/GMT is in the form YYYYMMDDHHMMSSZ; NIEM-ValidUTC/GMT is in the form YYYY-MM-DDThh:mm:ssZ. The ValidLocalDate is in the form YYYYMMDD; NIEM-ValidLocalDate is in the form YYYY-MM-DD.

t-6. GMT は UTC に置き換えられました。日付と時刻は、規格の 7.7.2 節で定義されています。ValidUTC/GMT の値の集合は規格の 7.7.2.2 節に記載されており、常に現在の日付と時刻より前です。ValidUTC/GMT は YYYYMMDDHHMMSSZ の形式で、NIEM-ValidUTC/GMT は YYYY-MM-DDThh:mm:ssZ の形式です。ValidLocalDate は YYYYMMDD の形式で、NIEM-ValidLocalDate は YYYY-MM-DD の形式です。

t-7. Assertions for alternate coordinate systems are not included in the tables.

t-7. 代替の座標系のアサーションは、表に含まれません。

t-8. Refer to http://earth-info.nga.mil/GandG/coordsys/grids/utm.html to determine valid values for the band of latitude and grid zone. There are possible discrepancies in the AN-2011 standard regarding the 10th information item for field xx.998. While the standard states that the coordinates are UTM (defined only for the area between 84N and 80S), it also allows values outside of UTM. However, allowing these extraneous values which are valid in UPS causes problems with the formatting such as the band of latitude, which doesn’t exist for those values. Therefore, this draft of the AN-2011 Assertion Tables does not allow values A,B,Y, and Z for the 10th information item.

t-8. 緯度帯とグリッドゾーンの有効な値を判断するには、http://earth-info.nga.mil/GandG/coordsys/grids/utm.html を参照してください。フィールド xx.998 の 10th 情報項目について、AN-2011 規格に矛盾の可能性があります。規格では座標は UTM(84N から 80S の領域のみで定義される)であるとしていますが、UTM の範囲外の値も認めています。しかし、UPS では有効なこれらの範囲外の値を認めると、それらの値には存在しない緯度帯など、書式に関する問題が生じます。したがって、AN-2011 アサーション表のこのドラフトでは、10th 情報項目の値 A、B、Y、および Z を認めません。

t-9. L2 and L3 assertions associated with SAP, FAP, and IAP are not included in the tables. Some of the assertions, such as determining the conditions under which the samples were collected to ensure the SAP, FAP, or IAP levels, are not feasible to test at this time.

t-9. SAP、FAP、および IAP に関連する L2 および L3 のアサーションは、表に含まれません。SAP、FAP、または IAP のレベルを満たすために、サンプルが採取された条件を判断するなど、一部のアサーションは、現時点では試験することが実現可能ではありません。

t-10. IBIA Vendor Registry is a registry of CBEFF Biometric Organizations that map the value QAV to a registered organization. The assertions will accept any values, as the standard does not require that the value be registered with IBIA.

t-10. IBIA Vendor Registry は、値 QAV を登録済みの組織に対応付ける CBEFF Biometric Organizations の登録簿です。規格は値が IBIA に登録されていることを求めていないため、アサーションは任意の値を受け入れます。

t-11. All image-related assertions associated with compressed image types are tested against the image metadata only and not against the image itself. Features of each of the image type’s metadata are defined in the “Image Metadata” table below. Combining the “Term” with the “Image Type” gives the specific implementation. For example, {Image Height-PNG} is equivalent to “2nd parameter of the IHDR chunk”. Also, IHDR means Image Header Chunk, so the full definition becomes “2nd parameter of the Image Header Chunk in a PNG image.” Note that for NIEM encoding, the image data must first be converted from Base-64.

t-11. 圧縮された画像タイプに関連するすべての画像関連アサーションは、画像メタデータのみに対して試験され、画像そのものに対しては試験されません。各画像タイプのメタデータの特徴は、以下の「画像メタデータ」の表で定義されています。「用語」と「画像タイプ」を組み合わせると、具体的な実装が得られます。たとえば、{Image Height-PNG} は「IHDR chunk の 2nd パラメーター」と同じです。また、IHDR は Image Header Chunk を意味するため、完全な定義は「PNG 画像の Image Header Chunk の 2nd パラメーター」になります。NIEM エンコーディングでは、画像データをまず Base-64 から変換しなければならないことに注意してください。

Table C-18 - Image Metadata

表 C-18 - 画像メタデータ

Image Metadata
TermImage Type(s)Implementation
Image WidthJPEG, JPEGL4th parameter of the Frame Header not counting the SOF marker
JP2, JP2L2nd parameter of Image Header box
PNG1st parameter of IHDR chunk
WSQ5th parameter of SOF not counting the SOF marker
Image HeightJPEG, JPEGL3rd parameter of the Frame Header not counting the SOF marker
JP2, JP2L1st parameter of Image Header box
PNG2nd parameter of IHDR chunk
WSQ4th parameter of SOF not counting the SOF marker
Sampling UnitsJPEG, JPEGL4th parameter in JFIF Header not counting the APP0 Marker
JP2, JP2LUndefined
PNG3rd parameter of PHYS chunk
WSQUndefined
Horizontal DensityJPEG, JPEGL5th parameter in JFIF Header not counting the APP0 Marker
JP2, JP2LUndefined
PNG1st parameter in PHYS Chunk
WSQUndefined
Vertical DensityJPEG, JPEGL6th parameter in JFIF Header not counting the APP0 Marker
JP2, JP2LUndefined
PNG2nd parameter in PHYS Chunk
WSQUndefined
BPXJPEG, JPEGL2nd parameter of the Frame Header not counting the SOF marker
JP2, JP2L7 LSB of 4th parameter of ImgBox + 1 if 4th parameter of ImgBox is not 255
PNG3rd parameter of IHDR chunk
WSQUndefined
CSPJPEG, JPEGLUndefined
JP2, JP2L4th parameter of Colour Specification box
PNG4th parameter of IHDR chunk
WSQUndefined
Encoder VersionWSQ10th parameter of SOF not counting the SOF marker
SOIJPEG, JPEGLStart of JPEG type image.
WSQStart of WSQ image.
SOFJPEG, JPEGLStart of frame in a JPEG type image.
WSQStart of WSQ image.
EOIJPEG, JPEGLEnd of a JPEG type image.
WSQEnd of WSQ image.
SOBWSQStart of block in a WSQ image.
SigBoxJP2,JP2LSignature Box that marks the start of a JP2 type image.
HeadBoxJP2,JP2LHeader Box in a JP2 type image.
ImgBoxJP2, JP2LImage Header Box in a JP2 type image.
PNGSigPNGSignature of a PNG image.
IHDRPNGImage Header Chunk in a PNG image.
IDATPNGImage Data Chunk in a PNG image.
IENDPNGImage End Chunk in a PNG image.
JFIF HeaderJPEG, JPEGLFrame for specifying JPEG type image metadata. Its inclusion is required by the standard.
PHYS ChunkPNGAn optional Chunk in a PNG image that may be used if present to verify image attributes.
画像メタデータ
用語画像タイプ実装
画像の幅JPEG, JPEGLFrame Header の 4th パラメーター(SOF マーカーは数えない)
JP2, JP2LImage Header box の 2nd パラメーター
PNGIHDR chunk の 1st パラメーター
WSQSOF の 5th パラメーター(SOF マーカーは数えない)
画像の高さJPEG, JPEGLFrame Header の 3rd パラメーター(SOF マーカーは数えない)
JP2, JP2LImage Header box の 1st パラメーター
PNGIHDR chunk の 2nd パラメーター
WSQSOF の 4th パラメーター(SOF マーカーは数えない)
サンプリング単位JPEG, JPEGLJFIF Header の 4th パラメーター(APP0 マーカーは数えない)
JP2, JP2L未定義
PNGPHYS chunk の 3rd パラメーター
WSQ未定義
水平方向の密度JPEG, JPEGLJFIF Header の 5th パラメーター(APP0 マーカーは数えない)
JP2, JP2L未定義
PNGPHYS Chunk の 1st パラメーター
WSQ未定義
垂直方向の密度JPEG, JPEGLJFIF Header の 6th パラメーター(APP0 マーカーは数えない)
JP2, JP2L未定義
PNGPHYS Chunk の 2nd パラメーター
WSQ未定義
BPXJPEG, JPEGLFrame Header の 2nd パラメーター(SOF マーカーは数えない)
JP2, JP2LImgBox の 4th パラメーターの下位 7 ビット + 1(ImgBox の 4th パラメーターが 255 でない場合)
PNGIHDR chunk の 3rd パラメーター
WSQ未定義
CSPJPEG, JPEGL未定義
JP2, JP2LColour Specification box の 4th パラメーター
PNGIHDR chunk の 4th パラメーター
WSQ未定義
エンコーダーのバージョンWSQSOF の 10th パラメーター(SOF マーカーは数えない)
SOIJPEG, JPEGLJPEG タイプの画像の開始。
WSQWSQ 画像の開始。
SOFJPEG, JPEGLJPEG タイプの画像のフレームの開始。
WSQWSQ 画像の開始。
EOIJPEG, JPEGLJPEG タイプの画像の終了。
WSQWSQ 画像の終了。
SOBWSQWSQ 画像のブロックの開始。
SigBoxJP2,JP2LJP2 タイプの画像の開始を示す Signature Box。
HeadBoxJP2,JP2LJP2 タイプの画像の Header Box。
ImgBoxJP2, JP2LJP2 タイプの画像の Image Header Box。
PNGSigPNGPNG 画像のシグネチャ。
IHDRPNGPNG 画像の Image Header Chunk。
IDATPNGPNG 画像の Image Data Chunk。
IENDPNGPNG 画像の Image End Chunk。
JFIF HeaderJPEG, JPEGLJPEG タイプの画像メタデータを指定するフレーム。このフレームの包含は規格で必須とされています。
PHYS ChunkPNGPNG 画像の任意の Chunk。存在する場合は、画像属性の検証に使用できます。

t-12. The image metadata required to implement the assertion is not defined in the image standard documentation.

t-12. アサーションを実装するために必要な画像メタデータは、画像規格の文書で定義されていません。

t-13. The assertion is addressed during parsing.

t-13. このアサーションは、構文解析の際に対処されます。

t-14. Further research is needed to determine the feasibility of testing for ASEG requirements related to the polygon structure.

t-14. 多角形の構造に関連する ASEG 要件の試験の実現可能性を判断するには、さらなる調査が必要です。

t-15. These requirements are related to record types currently not supported.

t-15. これらの要件は、現在サポートされていないレコードタイプに関連しています。

t-98. There are some discrepancies in the 4th draft of the standard regarding compression algorithms for various record types. For Type-4 records, Table 21 and section 8.4.8 state that the value can be 0 to 6 (any compression algorithm) while section 8.4 states that “All images shall be compressed using WSQ”. The assertions only allow WSQ and uncompressed types (values 0 and 1). For Type 10, section 7.7.9.3 does not define which compression algorithms are valid for facial images. The assertions allow all compression algorithms (except WSQ) for facial images. For Types 13 and 14, section 7.7.9.1 indicates that WSQ shall be used for grayscale friction ridges at 500 ppi. It does not specify if any other types may be used. Also, section 5.3.13 specifies that Type-13 should only allow uncompressed and lossless compression. The assertions will support WSQ and lossless for Type 13, and will allow any compression for Type 14. For Type 17, the section 7.7.9.2 clearly states that the baseline JPEG algorithm may not be used. The assertions will support compression algorithms specified by Table 71: NONE, PNG, JP2, and JP2L. The assertions will be modified later on according to the content of the 5th draft.

t-98. 規格の 4th ドラフトには、各種レコードタイプの圧縮アルゴリズムに関する矛盾がいくつかあります。Type-4 レコードについては、表 21 と 8.4.8 節が、値は 0〜6(任意の圧縮アルゴリズム)でよいとしている一方、8.4 節は「All images shall be compressed using WSQ」としています。アサーションは、WSQ と非圧縮のタイプ(値 0 および 1)のみを認めます。Type 10 については、7.7.9.3 節が、顔画像にどの圧縮アルゴリズムが有効かを定義していません。アサーションは、顔画像に(WSQ を除く)すべての圧縮アルゴリズムを認めます。Type 13 および 14 については、7.7.9.1 節が、500 ppi のグレースケール摩擦隆線には WSQ を使用しなければならないとしていますが、他のタイプを使用してもよいかどうかは規定していません。また、5.3.13 節は、Type-13 では非圧縮と可逆圧縮のみを認めるべきであるとしています。アサーションは、Type 13 では WSQ と可逆圧縮をサポートし、Type 14 では任意の圧縮を認めます。Type 17 については、7.7.9.2 節が、ベースライン JPEG アルゴリズムを使用してはならないと明確に述べています。アサーションは、表 71 で規定される圧縮アルゴリズム NONE、PNG、JP2、および JP2L をサポートします。アサーションは、5th ドラフトの内容に従って、後で修正されます。

t-99. Further research is needed to determine the assertions required to test for conformance to this requirement.

t-99. この要件への適合性を試験するために必要なアサーションを判断するには、さらなる調査が必要です。

Annex D: Exceptions Table

附属書 D: 例外の表

An “exception” refers to any AN-2011 requirement that does not have an associated assertion defined in this document. Table C.1 identifies and provides justification for all exceptions present in the tables.

「例外」とは、この文書でアサーションが定義されていない AN-2011 の要件を指します。表 C.1 は、表に存在するすべての例外を特定し、その根拠を示します。

Table D.1 - Exceptions Table

表 D.1 - 例外の表

ExceptionSectionRequirement SummaryJustification
Domain Names / Application Profile Specifications5.3.2Data contained in this record shall conform in format and content to the specifications of the domain name(s) as listed in Field 1.013 Domain name / DOM found in the Type-1 record, if that field is in the transaction. The default domain is NORAM. Field 1.016 Application profile specifications / APS allows the user to indicate conformance to multiple specifications. If Field 1.016 is specified, the Type-2 record must conform to each of the application profiles.
A DOM or APS reference uniquely identifies data contents and formats. Each domain and application profile shall have a point of contact responsible for maintaining this list. The contact shall serve as a registrar and maintain a repository including documentation for all of its common and user-specific Type-2 data fields. As additional fields are required by specific agencies for their own applications, new fields and definitions may be registered and reserved to have a specific meaning. When this occurs, the domain or application profile registrar is responsible for registering a single definition for each number used by different members of the domain or application profile .
The format and content of the record are defined by the DOM or APS. Each DOM and APS has related record-content definitions that may be updated. The evolving nature of the DOM and APS definitions and nature of using registrars makes testing for conformance via the CTS very difficult.
6An implementation domain, coded in Field 1.013 Domain name / DOM of a Type-1 record as an optional field, is a group of agencies or organizations that have agreed to use preassigned data fields with specific meanings (typically in Record Type-2) for exchanging information unique to their installations. The implementation domain is usually understood to be the primary application profile of the standard.
New to this version of the standard, Field 1.016 Application profile specifications / APS allows multiple application profiles to be referenced. The organization responsible for the profile, the profile name and its version are all mandatory for each application profile specified. A transaction must conform to each profile that is included in this field. It is possible to use Field 1.016 and / or Field 1.013.
A specified implementation domain and specified application profiles must all have the same definition for fields, subfields and information items that are contained in the transaction.
Since the “transaction must conform to each profile” included in the field, and those profiles are defined by the listed agency, the CTS would have to retrieve the latest requirements from the agency. Also, testing that all specified DOM and APS have the same definitions for fields, subfields, and information items is not feasible.
Alternate Character Sets5.6, Table 2Field 1.015 Character encoding/DCS is an optional field that allows the user to specify an alternate character encoding… Field 1.015 Character encoding/DCS contains three information items: the character encoding set index/ CSI, the character encoding sent name/CSN, and the character encoding set version/CSV. The first two items are selected from the appropriate columns of Table 2.Table 2 lists ASCII, UTF-16, UTF-8, and UTF-32 as possible encodings. However, the table also allows “User-defined” character encoding sets. Testing for conformance to user-defined character encoding sets is not feasible for the CTS. Further research is needed to support Character sets other than 7-bit ASCII.
Alternate Coordinate System7.7.3, Table 4The ninth information item is the geodetic datum code / GDC10. It is an alphanumeric value of 3 to 6 characters in length. This information item is used to indicate which coordinate system was used to represent the values in information items 2 through 7. If no entry is made in this information item, then the basis for the values entered in the first eight information items shall be WGS84, the code for the World Geodetic Survey 1984 version - WGS 84 (G873). See Table 4 for values.Table 4 lists 22 coordinate systems and the option to include “Other” types as well. It is not feasible for the CTS to test conformance to all coordinate systems, specifically those that are listed by the user under “Other”.
7.7.3A fourteenth optional information item geographic coordinate other system identifier / OSI allows for other coordinate systems. This information items specifies the system identifier. It is up to 10 characters in length. Examples are:
• MGRS (Military Grid Reference System)
• USNG (United States National Grid)
• GARS (Global Area Reference System)
• GEOREF (World Geographic Reference)
• LANDMARK (e.g. hydrant) and position relative to the landmark.
A fifteenth optional information item, is the geographic coordinate other system value / OCV. It shall only be present if OSI is present in the record. It can be up to 126 characters in length. If OSI is LANDMARK, OCV is free text and may be up to 126 characters. For details on the formatting of OCV for the other coordinate systems shown in OSI as examples, see http://earth-info.nga.mil/GandG/coordsys/grids/referencesys.html
While some examples are listed (MGRS, USNG, GARS, GEOREF, LANDMARK), there may be others that are not listed. It is not feasible for the CTS to test conformance to these coordinate systems, specifically those that may be included but are not listed as examples.
Subject Acquisition Profiles SAP/FAP/IAP7.7.5, Table 8, Table 9, Table 10A subject acquisition profile is used to describe a set of characteristics concerning the capture of the biometric sample. These profiles have mnemonics SAP for face, FAP for fingerprints and IAP for iris records.It is not feasible to test if the image was captured under the conditions specified by the SAP, FAP or IAP level as defined in Tables 8, 9 and 10. However, the fields will be tested for valid level values.
Open and Closed Paths7.8Several Record Types define open paths (also called contours or polylines) and / or closed paths (polygons) on an image. They are comprised of a set of vertices. For each, the order of the vertices shall be in their consecutive order along the length of the path, either clockwise or counterclockwise. (A straight line of only two points may start at either end). A path may not have any sides crossing. No two vertices shall occupy the same position.
There may be up to 99 vertices.
An open path is a series of connected line segments that do not close or overlap. A closed path (polygon) completes a circuit. The closed path side defined by the last vertex and the first vertex shall complete the polygon. A polygon shall have at least 3 vertices. The contours in Record Type-17: Iris image record can be a circle or ellipse. A circle only requires 2 points to define it (See Table 16).
There are two different approaches to the paths in this standard. The 2007 and 2008 version of the standard used paths for Field 14.025: Alternate finger segment position(s) / ASEG.
That approach has been retained in this version for all paths except in the Extended Feature Set (EFS) of Record Type-9. The EFS adopted an approach expressing the path in a single information item, which is different than that used in other record types.
Further research is needed to determine the feasibility of testing for:
-simple, plane figure
-no sides crossing
-no interior holes
例外節要件の概要根拠
ドメイン名 / アプリケーションプロファイル仕様5.3.2このレコードに含まれるデータは、トランザクションにそのフィールドが含まれる場合、Type-1 レコードの Field 1.013 Domain name / DOM に列挙されたドメイン名の仕様に、形式および内容の両面で適合しなければなりません。デフォルトのドメインは NORAM です。Field 1.016 Application profile specifications / APS により、ユーザーは複数の仕様への適合を示すことができます。Field 1.016 が指定された場合、Type-2 レコードは各アプリケーションプロファイルに適合しなければなりません。
DOM または APS の参照は、データの内容と形式を一意に識別します。各ドメインおよびアプリケーションプロファイルには、このリストの維持管理を担当する連絡窓口が置かれなければなりません。連絡窓口は登録者として機能し、共通およびユーザー固有のすべての Type-2 データフィールドに関する文書を含むリポジトリーを維持しなければなりません。特定の機関が自らのアプリケーションのために追加フィールドを必要とする場合、新しいフィールドと定義を登録し、特定の意味を持つものとして予約してもよいです。この場合、ドメインまたはアプリケーションプロファイルの登録者は、ドメインまたはアプリケーションプロファイルの異なるメンバーが使用する各番号について、単一の定義を登録する責任を負います。
レコードの形式と内容は、DOM または APS によって定義されます。各 DOM および APS には、更新される場合があるレコード内容の定義が関連付けられています。DOM および APS の定義が変化し続ける性質と、登録者を用いる性質のため、CTS による適合性試験は非常に困難です。
6実装ドメインは、Type-1 レコードの Field 1.013 Domain name / DOM に任意フィールドとして符号化されます。これは、各機関の環境に固有の情報を交換するために、あらかじめ割り当てられた特定の意味を持つデータフィールド(通常は Record Type-2 内)を使用することに合意した機関または組織のグループです。実装ドメインは、通常、規格の主要なアプリケーションプロファイルとして理解されます。
このバージョンの規格で新たに、Field 1.016 Application profile specifications / APS により、複数のアプリケーションプロファイルを参照できるようになりました。プロファイルを担当する組織、プロファイル名、およびそのバージョンは、指定される各アプリケーションプロファイルについて、いずれも必須です。このフィールドに含まれる各プロファイルに、トランザクションは適合しなければなりません。Field 1.016 と / または Field 1.013 を使用できます。
指定された実装ドメインと指定されたアプリケーションプロファイルは、トランザクションに含まれるフィールド、サブフィールド、および情報項目について、すべて同じ定義を持たなければなりません。
このフィールドに含まれる各プロファイルにトランザクションが適合しなければならず、それらのプロファイルは列挙された機関によって定義されるため、CTS は機関から最新の要件を取得する必要があります。また、指定されたすべての DOM および APS がフィールド、サブフィールド、および情報項目について同じ定義を持つか試験することは、実現可能ではありません。
代替文字セット5.6, Table 2Field 1.015 Character encoding/DCS は、ユーザーが代替文字エンコーディングを指定できる任意フィールドです…Field 1.015 Character encoding/DCS は、文字エンコーディングセットのインデックス / CSI、文字エンコーディングセット名 / CSN、および文字エンコーディングセットのバージョン / CSV の 3 つの情報項目を含みます。最初の 2 つの項目は、表 2 の該当する列から選択されます。表 2 は、可能なエンコーディングとして ASCII、UTF-16、UTF-8、および UTF-32 を列挙しています。ただし、この表は「User-defined」の文字エンコーディングセットも認めています。ユーザー定義の文字エンコーディングセットへの適合性試験は、CTS では実現可能ではありません。7 ビット ASCII 以外の文字セットをサポートするには、さらなる調査が必要です。
代替座標系7.7.3, Table 49 番目の情報項目は、測地系コード / GDC10 です。これは長さ 3~6 文字の英数字値です。この情報項目は、情報項目 2~7 の値を表すために使用された座標系を示すために使用されます。この情報項目に入力がない場合、最初の 8 つの情報項目に入力された値の基準は WGS84 でなければなりません。これは World Geodetic Survey 1984 version - WGS 84 (G873) のコードです。値については表 4 を参照してください。表 4 は 22 の座標系を列挙しており、「Other」タイプを含めるオプションもあります。すべての座標系、特にユーザーが「Other」として列挙する座標系への適合性を CTS が試験することは、実現可能ではありません。
7.7.314 番目の任意情報項目である地理座標のその他の系の識別子 / OSI により、その他の座標系を指定できます。この情報項目は系の識別子を指定し、長さは最大 10 文字です。例は次のとおりです。
• MGRS (Military Grid Reference System)
• USNG (United States National Grid)
• GARS (Global Area Reference System)
• GEOREF (World Geographic Reference)
• LANDMARK(例:消火栓)およびランドマークに対する位置。
15 番目の任意情報項目は、地理座標のその他の系の値 / OCV です。レコードに OSI が存在する場合に限り、OCV も存在しなければなりません。長さは最大 126 文字です。OSI が LANDMARK の場合、OCV は自由テキストで、最大 126 文字を指定できます。OSI の例として示されているその他の座標系における OCV の書式の詳細については、http://earth-info.nga.mil/GandG/coordsys/grids/referencesys.html を参照してください。
いくつかの例(MGRS、USNG、GARS、GEOREF、LANDMARK)が挙げられていますが、他にも挙げられていないものがある場合があります。これらの座標系、特に含まれていても例として挙げられていない座標系への適合性を CTS が試験することは、実現可能ではありません。
被写体取得プロファイル SAP/FAP/IAP7.7.5, Table 8, Table 9, Table 10被写体取得プロファイルは、生体サンプルの取得に関する一連の特性を記述するために使用されます。これらのプロファイルには、顔の SAP、指紋の FAP、虹彩レコードの IAP というニーモニックがあります。表 8、9、および 10 で定義される SAP、FAP、または IAP のレベルで指定された条件下で画像が取得されたかどうかを試験することは、実現可能ではありません。ただし、フィールドについては有効なレベル値かどうかが試験されます。
開いた経路と閉じた経路7.8いくつかの Record Type は、画像上の開いた経路(輪郭またはポリラインとも呼ばれます)および / または閉じた経路(多角形)を定義します。これらは頂点の集合で構成されます。各経路について、頂点は経路の長さに沿った連続した順序で、時計回りまたは反時計回りに並ばなければなりません。(2 点のみの直線は、どちらの端から始めてもよいです。)経路の辺が交差してはなりません。2 つの頂点が同じ位置を占めてはなりません。
頂点は最大 99 個です。
開いた経路は、閉じない、または重ならない連結した線分の列です。閉じた経路(多角形)は一周して閉じます。最後の頂点と最初の頂点で定義される閉じた経路の辺は、多角形を閉じなければなりません。多角形には少なくとも 3 つの頂点がなければなりません。Record Type-17: Iris image record の輪郭は円または楕円でもかまいません。円を定義するのに必要なのは 2 点のみです(表 16 を参照)。
この規格には、経路に対する異なるアプローチが 2 つあります。規格の 2007 年版および 2008 年版では、Field 14.025: Alternate finger segment position(s) / ASEG に経路を使用していました。
このバージョンでも、Record Type-9 の Extended Feature Set (EFS) における経路を除き、このアプローチが維持されています。EFS では、経路を単一の情報項目で表すアプローチが採用されており、これは他のレコードタイプで使用されるものとは異なります。
次の事項について、試験が可能かどうかを判断するには、さらなる調査が必要です。
-単純な平面図形
-辺が交差しないこと
-内部に穴がないこと