原文

[要約] RFC 2842は、BGP-4(Border Gateway Protocol 4)において、ルーターがサポートするオプション機能(能力)をピアリング相手に通知するための「能力広告 (Capabilities Advertisement)」メカニズムを定義しています。OPENメッセージ内の新しいオプションパラメータを使用して、マルチプロトコル拡張などの機能を動的に確認し、相互運用可能な機能のみを有効にする手順を規定しています。BGPプロトコルの将来的な拡張を、既存の実装との後方互換性を保ちつつ安全かつ柔軟に導入できるようにすることを目的としています。

Network Working Group                                        R. Chandra
Request for Comments: 2842                        Redback Networks Inc.
Category: Standards Track                                    J. Scudder
                                                          cisco Systems
                                                               May 2000
        

Capabilities Advertisement with BGP-4

BGP-4 における能力広告

Status of this Memo

本文書の状態

This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.

このドキュメントは、インターネットコミュニティのインターネット標準トラックプロトコルを指定し、改善のための議論と提案を要求します。このプロトコルの標準化状態とステータスについては、「インターネット公式プロトコル標準」(STD 1)の現在のエディションを参照してください。このメモの配布は無制限です。

Copyright Notice

著作権表示

Copyright (C) The Internet Society (2000). All Rights Reserved.

Copyright(c)The Internet Society(2000)。無断転載を禁じます。

Abstract

概要

Currently BGP-4 [BGP-4] requires that when a BGP speaker receives an OPEN message with one or more unrecognized Optional Parameters, the speaker must terminate BGP peering. This complicates introduction of new capabilities in BGP.

現在、BGP-4 [BGP-4]では、BGPスピーカーが1つ以上の認識されていないオプションパラメーターを使用して開かれたメッセージを受信する場合、スピーカーはBGPピアリングを終了する必要があります。これにより、BGPでの新しい機能の導入が複雑になります。

This document defines new Optional Parameter, called Capabilities, that is expected to facilitate introduction of new capabilities in BGP by providing graceful capability advertisement without requiring that BGP peering be terminated.

このドキュメントでは、BGPのピアリングを終了することを要求することなく優雅な機能広告を提供することにより、BGPの新しい機能の導入を容易にすることが期待される、機能と呼ばれる新しいオプションパラメーターを定義します。

1. Overview of Operations
1. 操作の概要

When a BGP speaker that supports capabilities advertisement sends an OPEN message to its BGP peer, the message may include an Optional Parameter, called Capabilities. The parameter lists the capabilities supported by the speaker.

機能広告をサポートするBGPスピーカーがBGPピアに開かれたメッセージを送信する場合、メッセージには機能と呼ばれるオプションのパラメーターが含まれる場合があります。パラメーターは、スピーカーによってサポートされる機能をリストします。

A BGP speaker determines the capabilities supported by its peer by examining the list of capabilities present in the Capabilities Optional Parameter carried by the OPEN message that the speaker receives from the peer.

BGPスピーカーは、スピーカーがピアから受け取るオープンメッセージによって伝達される機能に存在する機能に存在する機能のリストを調べることにより、ピアによってサポートされる機能を決定します。

A BGP speaker that supports a particular capability may use this capability with its peer after the speaker determines (as described above) that the peer supports this capability.

特定の機能をサポートするBGPスピーカーは、スピーカーがピアがこの機能をサポートすることを(上記のように)決定した後、ピアでこの機能を使用する場合があります。

A BGP speaker determines that its peer doesn't support capabilities advertisement, if in response to an OPEN message that carries the Capabilities Optional Parameter, the speaker receives a NOTIFICATION message with the Error Subcode set to Unsupported Optional Parameter. In this case the speaker should attempt to re-establish a BGP connection with the peer without sending to the peer the Capabilities Optional Parameter.

BGPスピーカーは、そのピアが機能の広告をサポートしていないと判断します。機能オプションのパラメーターを運ぶオープンメッセージに応答した場合、スピーカーはサポートされていないオプションパラメーターにエラーサブコードを設定した通知メッセージを受信します。この場合、スピーカーは、ピアにピアに機能を送信することなく、ピアとのBGP接続を再確立しようとする必要があります。

If a BGP speaker that supports a certain capability determines that its peer doesn't support this capability, the speaker may send a NOTIFICATION message to the peer, and terminate peering. The Error Subcode in the message is set to Unsupported Capability. The message should contain the capability (capabilities) that causes the speaker to send the message. The decision to send the message and terminate peering is local to the speaker. Such peering should not be re-established automatically.

特定の機能をサポートするBGPスピーカーが、ピアがこの機能をサポートしていないと判断した場合、スピーカーはピアに通知メッセージを送信し、ピアリングを終了する場合があります。メッセージのエラーサブコードは、サポートされていない機能に設定されています。メッセージには、スピーカーがメッセージを送信する機能(機能)を含める必要があります。メッセージを送信してピアリングを終了するという決定は、スピーカーにローカルです。このようなピアリングを自動的に再確立するべきではありません。

2. Capabilities Optional Parameter (Parameter Type 2):

2. 機能オプションパラメーター(パラメータータイプ2):

This is an Optional Parameter that is used by a BGP speaker to convey to its BGP peer the list of capabilities supported by the speaker.

これは、BGPスピーカーによって使用されるオプションのパラメーターであり、スピーカーがサポートする機能のリストをBGPピアに伝えます。

The parameter contains one or more triples <Capability Code, Capability Length, Capability Value>, where each triple is encoded as shown below:

パラメーターには、1つ以上のトリプル<機能コード、機能の長さ、機能値>が含まれています。各トリプルは、以下に示すようにエンコードされます。

      +------------------------------+
      | Capability Code (1 octet)    |
      +------------------------------+
      | Capability Length (1 octet)  |
      +------------------------------+
      | Capability Value (variable)  |
      +------------------------------+
        

The use and meaning of these fields are as follows:

これらのフィールドの使用と意味は次のとおりです。

Capability Code:

機能コード:

Capability Code is a one octet field that unambiguously identifies individual capabilities.

機能コードは、個々の機能を明確に識別する1つのオクテットフィールドです。

Capability Length:

機能の長さ:

Capability Length is a one octet field that contains the length of the Capability Value field in octets.

機能の長さは、オクテットの機能値フィールドの長さを含む1オクテットフィールドです。

Capability Value:

機能値:

Capability Value is a variable length field that is interpreted according to the value of the Capability Code field.

機能値は、機能コードフィールドの値に従って解釈される可変長さフィールドです。

A particular capability, as identified by its Capability Code, may occur more than once within the Optional Parameter.

その機能コードで識別される特定の機能は、オプションのパラメーター内で複数回発生する可能性があります。

3. Extensions to Error Handling
3. エラー処理への拡張

This document defines new Error Subcode - Unsupported Capability. The value of this Subcode is 7. The Data field in the NOTIFICATION message lists the set of capabilities that cause the speaker to send the message. Each such capability is encoded the same way as it was encoded in the received OPEN message.

このドキュメントでは、新しいエラーサブコード - サポートされていない機能を定義します。このサブコードの値は7です。通知メッセージのデータフィールドには、スピーカーがメッセージを送信する機能のセットがリストされています。そのような各機能は、受信したオープンメッセージでエンコードされたのと同じ方法でエンコードされます。

4. IANA Considerations
4. IANAの考慮事項

Section 4 defines a Capability Optional Parameter along with an Capability Code field. IANA is expected to create and maintain the registry for Capability Code values. Capability Code value 0 is reserved. Capability Code values 1 through 63 are to be assigned by IANA using the "IETF Consensus" policy defined in RFC2434. Capability Code values 64 through 127 are to be assigned by IANA, using the "First Come First Served" policy defined in RFC2434. Capability Code values 128 through 255 are for "Private Use" as defined in RFC2434.

セクション4では、機能コードフィールドとともに機能オプションのパラメーターを定義します。IANAは、機能コード値のレジストリを作成および維持することが期待されています。機能コード値0は予約されています。機能コード値1〜63は、RFC2434で定義された「IETFコンセンサス」ポリシーを使用してIANAによって割り当てられます。能力コード値64〜127は、RFC2434で定義された「First Come First Server」ポリシーを使用して、IANAによって割り当てられます。機能コード値128〜255は、RFC2434で定義されている「プライベート使用」用です。

5. Security Considerations
5. セキュリティに関する考慮事項

This extension to BGP does not change the underlying security issues inherent in the existing BGP [Heffernan].

BGPへのこの拡張は、既存のBGP [Heffernan]に固有の根本的なセキュリティ問題を変更しません。

6. Acknowledgements
6. 謝辞

The authors would like to thank members of the IDR Working Group for their review and comments.

著者は、IDRワーキンググループのメンバーのレビューとコメントに感謝したいと思います。

7. References
7. 参考文献

[BGP-4] Rekhter, Y. and T. Li, "A Border Gateway Protocol 4 (BGP-4)", RFC 1771, March 1995.

[BGP-4] Rekhter, Y. and T. Li、「Border Gateway Protocol 4(BGP-4)」、RFC 1771、1995年3月。

[Heffernan] Heffernan, A., "Protection of BGP Sessions via the TCP MD5 Signature Option", RFC 2385, August 1998.

[Heffernan] Heffernan, A.、「TCP MD5署名オプションによるBGPセッションの保護」、RFC 2385、1998年8月。

8. Authors' Addresses
8. 著者のアドレス

Ravi Chandra Redback Networks Inc. 350, Holger Way San Jose, CA 95134

Ravi Chandra Redback Networks Inc. 350、Holger Way San Jose、CA 95134

   EMail: rchandra@redback.com
        

John G. Scudder Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134

John G. Scudder Cisco Systems、Inc。170 West Tasman Drive San Jose、CA 95134

   EMail: jgs@cisco.com
        
9. 完全な著作権声明