[要約] RFC 8294は、ルーティングエリアのための共通YANGデータ型に関する仕様です。このRFCの目的は、ルーティングプロトコルの設計や実装において一貫性と相互運用性を向上させるために、共通のデータ型を提供することです。

Internet Engineering Task Force (IETF)                            X. Liu
Request for Comments: 8294                                         Jabil
Category: Standards Track                                          Y. Qu
ISSN: 2070-1721                             Futurewei Technologies, Inc.
                                                               A. Lindem
                                                           Cisco Systems
                                                                C. Hopps
                                                        Deutsche Telekom
                                                               L. Berger
                                                 LabN Consulting, L.L.C.
                                                           December 2017
        

Common YANG Data Types for the Routing Area

ルーティングエリアの一般的なYANGデータタイプ

Abstract

概要

This document defines a collection of common data types using the YANG data modeling language. These derived common types are designed to be imported by other modules defined in the routing area.

このドキュメントでは、YANGデータモデリング言語を使用して一般的なデータ型のコレクションを定義しています。これらの派生共通タイプは、ルーティング領域で定義された他のモジュールによってインポートされるように設計されています。

Status of This Memo

本文書の状態

This is an Internet Standards Track document.

これはInternet Standards Trackドキュメントです。

This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.

このドキュメントは、IETF(Internet Engineering Task Force)の製品です。これは、IETFコミュニティのコンセンサスを表しています。公開レビューを受け、インターネットエンジニアリングステアリンググループ(IESG)による公開が承認されました。インターネット標準の詳細については、RFC 7841のセクション2をご覧ください。

Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8294.

このドキュメントの現在のステータス、正誤表、およびフィードバックの提供方法に関する情報は、https://www.rfc-editor.org/info/rfc8294で入手できます。

Copyright Notice

著作権表示

Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.

Copyright(c)2017 IETF Trustおよびドキュメントの作成者として識別された人物。全著作権所有。

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

この文書は、BCP 78およびIETF文書に関するIETFトラストの法的規定(https://trustee.ietf.org/license-info)の対象であり、この文書の発行日に有効です。これらのドキュメントは、このドキュメントに関するあなたの権利と制限について説明しているため、注意深く確認してください。このドキュメントから抽出されたコードコンポーネントには、Trust Legal Provisionsのセクション4.eに記載されているSimplified BSD Licenseのテキストが含まれている必要があり、Simplified BSD Licenseに記載されているように保証なしで提供されます。

Table of Contents

目次

   1. Introduction ....................................................3
      1.1. Terminology ................................................3
   2. Overview ........................................................3
   3. IETF Routing Types YANG Module ..................................8
   4. IANA Routing Types YANG Module .................................27
   5. IANA Considerations ............................................37
      5.1. IANA-Maintained iana-routing-types Module .................38
   6. Security Considerations ........................................39
   7. References .....................................................39
      7.1. Normative References ......................................39
      7.2. Informative References ....................................40
   Acknowledgements ..................................................42
   Authors' Addresses ................................................43
        
1. Introduction
1. はじめに

YANG [RFC6020] [RFC7950] is a data modeling language used to model configuration data, state data, Remote Procedure Calls, and notifications for network management protocols. The YANG language supports a small set of built-in data types and provides mechanisms to derive other types from the built-in types.

YANG [RFC6020] [RFC7950]は、構成データ、状態データ、リモートプロシージャコール、およびネットワーク管理プロトコルの通知をモデル化するために使用されるデータモデリング言語です。 YANG言語は、組み込みデータ型の小さなセットをサポートし、組み込み型から他の型を派生させるメカニズムを提供します。

This document introduces a collection of common data types derived from the built-in YANG data types. The derived types are designed to be the common types applicable for modeling in the routing area.

このドキュメントでは、組み込みのYANGデータ型から派生した一般的なデータ型のコレクションを紹介します。派生型は、ルーティング領域でのモデリングに適用できる一般的な型になるように設計されています。

1.1. Terminology
1.1. 用語

The terminology for describing YANG data models is found in [RFC7950].

YANGデータモデルを記述するための用語は、[RFC7950]にあります。

2. Overview
2. 概観

This document defines two YANG modules for common routing types: ietf-routing-types and iana-routing-types. The only module imports (ietf-yang-types and ietf-inet-types; see Section 3) are from [RFC6991]. The ietf-routing-types module contains common routing types other than those corresponding directly to IANA mappings. These include the following:

このドキュメントでは、一般的なルーティングタイプであるietf-routing-typesとiana-routing-typesの2つのYANGモジュールを定義しています。唯一のモジュールのインポート(ietf-yang-typesおよびietf-inet-types、セクション3を参照)は、[RFC6991]からのものです。 ietf-routing-typesモジュールには、IANAマッピングに直接対応するもの以外の一般的なルーティングタイプが含まれています。これらには以下が含まれます。

router-id Router Identifiers are commonly used to identify nodes in routing and other control-plane protocols. An example usage of router-id can be found in [OSPF-YANG].

router-idルーター識別子は一般に、ルーティングやその他のコントロールプレーンプロトコルでノードを識別するために使用されます。 router-idの使用例は[OSPF-YANG]にあります。

route-target Route Targets (RTs) are commonly used to control the distribution of Virtual Routing and Forwarding (VRF) information (see [RFC4364]) in support of BGP/MPLS IP Virtual Private Networks (VPNs) and BGP/MPLS Ethernet VPNs [RFC7432]. An example usage can be found in [L2VPN-YANG].

route-targetルートターゲット(RT)は、BGP / MPLS IP仮想プライベートネットワーク(VPN)およびBGP / MPLSイーサネットVPNをサポートする仮想ルーティングおよび転送(VRF)情報([RFC4364]を参照)の配布を制御するために一般的に使用されます[ RFC7432]。使用例は[L2VPN-YANG]にあります。

ipv6-route-target IPv6 Route Targets are similar to standard Route Targets, except that they are IPv6 Address Specific BGP Extended Communities as described in [RFC5701]. An IPv6 Route Target is 20 octets and includes an IPv6 address as the global administrator.

ipv6-route-target IPv6ルートターゲットは、[RFC5701]で説明されているように、IPv6アドレス固有のBGP拡張コミュニティであることを除いて、標準のルートターゲットに似ています。 IPv6ルートターゲットは20オクテットで、グローバル管理者としてIPv6アドレスを含みます。

route-target-type This type defines the import and export rules of Route Targets, as described in Section 4.3.1 of [RFC4364].

route-target-typeこのタイプは、[RFC4364]のセクション4.3.1で説明されているように、ルートターゲットのインポートおよびエクスポートルールを定義します。

route-distinguisher Route Distinguishers (RDs) are commonly used to identify separate routes in support of VPNs. For example, as described in [RFC4364], RDs are commonly used to identify independent VPNs and VRFs, and, more generally, to identify multiple routes to the same prefix.

route-distinguisher Route Distinguishers(RD)は、VPNをサポートする個別のルートを識別するために一般的に使用されます。たとえば、[RFC4364]で説明されているように、RDは通常、独立したVPNとVRFを識別するために使用され、より一般的には、同じプレフィックスへの複数のルートを識別するために使用されます。

route-origin A Route Origin is commonly used to indicate the Site of Origin for VRF information (see [RFC4364]) in support of BGP/MPLS IP VPNs and BGP/MPLS Ethernet VPNs [RFC7432].

route-origin Route Originは、BGP / MPLS IP VPNおよびBGP / MPLSイーサネットVPN [RFC7432]をサポートするVRF情報([RFC4364]を参照)のSite of Originを示すために一般的に使用されます。

ipv6-route-origin An IPv6 Route Origin would also be used to indicate the Site of Origin for VRF information (see [RFC4364]) in support of VPNs. IPv6 Route Origins are IPv6 Address Specific BGP Extended Communities as described in [RFC5701]. An IPv6 Route Origin is 20 octets and includes an IPv6 address as the global administrator.

ipv6-route-origin IPv6ルートオリジンは、VPNをサポートするVRF情報([RFC4364]を参照)のサイトのオリジンを示すためにも使用されます。 [RFC5701]で説明されているように、IPv6ルートオリジンはIPv6アドレス固有のBGP拡張コミュニティです。 IPv6ルートオリジンは20オクテットであり、グローバル管理者としてIPv6アドレスを含みます。

ipv4-multicast-group-address This type defines the representation of an IPv4 multicast group address, which is in the range of 224.0.0.0 to 239.255.255.255. An example usage can be found in [PIM-YANG].

ipv4-multicast-group-addressこのタイプは、224.0.0.0から239.255.255.255の範囲のIPv4マルチキャストグループアドレスの表現を定義します。使用例は[PIM-YANG]にあります。

ipv6-multicast-group-address This type defines the representation of an IPv6 multicast group address, which is in the range of ff00::/8. An example usage can be found in [PIM-YANG].

ipv6-multicast-group-addressこのタイプは、IPv6マルチキャストグループアドレスの表現を定義します。これは、ff00 :: / 8の範囲です。使用例は[PIM-YANG]にあります。

ip-multicast-group-address This type represents an IP multicast group address and is IP version neutral. The format of the textual representation implies the IP version. An example usage can be found in [PIM-YANG].

ip-multicast-group-addressこのタイプはIPマルチキャストグループアドレスを表し、IPバージョンニュートラルです。テキスト表現の形式は、IPバージョンを意味します。使用例は[PIM-YANG]にあります。

ipv4-multicast-source-address This represents the IPv4 source address type for use in multicast control protocols. This type also allows the indication of wildcard sources, i.e., "*". An example of where this type may/will be used is [PIM-YANG].

ipv4-multicast-source-addressこれは、マルチキャスト制御プロトコルで使用するIPv4送信元アドレスタイプを表します。このタイプでは、ワイルドカードソース、つまり「*」を示すこともできます。このタイプの使用例は、[PIM-YANG]です。

ipv6-multicast-source-address This represents the IPv6 source address type for use in multicast control protocols. This type also allows the indication of wildcard sources, i.e., "*". An example of where this type may/will be used is [PIM-YANG].

ipv6-multicast-source-addressこれは、マルチキャスト制御プロトコルで使用するIPv6送信元アドレスタイプを表します。このタイプでは、ワイルドカードソース、つまり「*」を示すこともできます。このタイプの使用例は、[PIM-YANG]です。

bandwidth-ieee-float32 This represents the bandwidth in IEEE 754 floating-point 32-bit binary format [IEEE754]. It is commonly used in Traffic Engineering control-plane protocols. An example of where this type may/will be used is [OSPF-YANG].

bandwidth-ieee-float32これは、IEEE 754浮動小数点32ビットバイナリフォーマット[IEEE754]で帯域幅を表します。トラフィックエンジニアリングのコントロールプレーンプロトコルで一般的に使用されます。このタイプの使用例は、[OSPF-YANG]です。

link-access-type This type identifies the IGP link type.

link-access-typeこのタイプは、IGPリンクタイプを識別します。

timer-multiplier This type is used in conjunction with a timer-value type. It is generally used to indicate the number of timer-value intervals that may expire before a specific event must occur. Examples of this include the arrival of any Bidirectional Forwarding Detection (BFD) packets (see [RFC5880] Section 6.8.4) or hello_interval [RFC3209].

timer-multiplierこのタイプは、timer-valueタイプと組み合わせて使用​​されます。これは通常、特定のイベントが発生する前に期限切れになる可能性のあるタイマー値間隔の数を示すために使用されます。この例には、双方向転送検出(BFD)パケットの到着([RFC5880]セクション6.8.4を参照)またはhello_interval [RFC3209]が含まれます。

timer-value-seconds16 This type covers timers that can be set in seconds, not set, or set to infinity. This type supports a range of values that can be represented in a uint16 (2 octets).

timer-value-seconds16このタイプは、秒単位で設定できる、設定できない、または無限に設定できるタイマーをカバーします。このタイプは、uint16(2オクテット)で表すことができる値の範囲をサポートします。

timer-value-seconds32 This type covers timers that can be set in seconds, not set, or set to infinity. This type supports a range of values that can be represented in a uint32 (4 octets).

timer-value-seconds32このタイプは、秒単位で設定できる、設定できない、または無限に設定できるタイマーをカバーします。このタイプは、uint32(4オクテット)で表すことができる値の範囲をサポートします。

timer-value-milliseconds This type covers timers that can be set in milliseconds, not set, or set to infinity. This type supports a range of values that can be represented in a uint32 (4 octets).

timer-value-millisecondsこのタイプは、ミリ秒単位で設定できる、設定できない、または無限に設定できるタイマーをカバーします。このタイプは、uint32(4オクテット)で表すことができる値の範囲をサポートします。

percentage This type defines a percentage with a range of 0-100%. An example usage can be found in [BGP-Model].

パーセンテージこのタイプは、0〜100%の範囲でパーセンテージを定義します。使用例は[BGP-Model]にあります。

timeticks64 This type is based on the timeticks type defined in [RFC6991] but with 64-bit precision. It represents the time in hundredths of a second between two epochs. An example usage can be found in [BGP-Model].

timeticks64この型は、[RFC6991]で定義されているtimeticks型に基づいていますが、64ビット精度です。 2つのエポック間の時間を100分の1秒単位で表します。使用例は[BGP-Model]にあります。

uint24 This type defines a 24-bit unsigned integer. An example usage can be found in [OSPF-YANG].

uint24この型は、24ビットの符号なし整数を定義します。使用例は[OSPF-YANG]にあります。

generalized-label This type represents a Generalized Label for Generalized Multiprotocol Label Switching (GMPLS) [RFC3471]. The Generalized Label does not identify its type, which is known from context. An example usage can be found in [TE-YANG].

generalized-labelこのタイプは、一般化マルチプロトコルラベルスイッチング(GMPLS)[RFC3471]の一般化ラベルを表します。 Generalized Labelは、そのタイプを識別しません。これは、コンテキストから知られています。使用例は[TE-YANG]にあります。

mpls-label-special-purpose This type represents the special-purpose MPLS label values [RFC7274].

mpls-label-special-purposeこのタイプは、特別な目的のMPLSラベル値[RFC7274]を表します。

mpls-label-general-use The 20-bit label value in an MPLS label stack is specified in [RFC3032]. This label value does not include the encodings of Traffic Class and TTL (Time to Live). The label range specified by this type is for general use, with special-purpose MPLS label values excluded.

mpls-label-general-use MPLSラベルスタックの20ビットラベル値は、[RFC3032]で指定されています。このラベル値には、トラフィッククラスとTTL(存続時間)のエンコーディングは含まれません。このタイプで指定されるラベル範囲は、特別な目的のMPLSラベル値を除いた一般的な使用のためのものです。

mpls-label The 20-bit label value in an MPLS label stack is specified in [RFC3032]. This label value does not include the encodings of Traffic Class and TTL. The label range specified by this type covers the general-use values and the special-purpose label values. An example usage can be found in [MPLS-Base-YANG].

mpls-label MPLSラベルスタックの20ビットのラベル値は、[RFC3032]で指定されています。このラベル値には、トラフィッククラスとTTLのエンコーディングは含まれません。このタイプで指定されるラベル範囲は、汎用値と特殊目的ラベル値をカバーします。使用例は[MPLS-Base-YANG]にあります。

This document defines the following YANG groupings:

このドキュメントでは、次のYANGグループを定義しています。

mpls-label-stack This grouping defines a reusable collection of schema nodes representing an MPLS label stack [RFC3032].

mpls-label-stackこのグループは、MPLSラベルスタック[RFC3032]を表すスキーマノードの再利用可能なコレクションを定義します。

vpn-route-targets This grouping defines a reusable collection of schema nodes representing Route Target import-export rules used in BGP-enabled VPNs [RFC4364] [RFC4664]. An example usage can be found in [L2VPN-YANG].

vpn-route-targetsこのグループは、BGP対応VPN [RFC4364] [RFC4664]で使用されるルートターゲットのインポート/エクスポートルールを表すスキーマノードの再利用可能なコレクションを定義します。使用例は[L2VPN-YANG]にあります。

The iana-routing-types module contains common routing types corresponding directly to IANA mappings. These include the following:

iana-routing-typesモジュールには、IANAマッピングに直接対応する一般的なルーティングタイプが含まれています。これらには以下が含まれます。

address-family This type defines values for use in Address Family identifiers. The values are based on the IANA "Address Family Numbers" registry [IANA-ADDRESS-FAMILY-REGISTRY]. An example usage can be found in [BGP-Model].

address-familyこのタイプは、アドレスファミリ識別子で使用する値を定義します。値は、IANA「アドレスファミリ番号」レジストリ[IANA-ADDRESS-FAMILY-REGISTRY]に基づいています。使用例は[BGP-Model]にあります。

subsequent-address-family This type defines values for use in Subsequent Address Family Identifiers (SAFIs). The values are based on the IANA "Subsequent Address Family Identifiers (SAFI) Parameters" registry [IANA-SAFI-REGISTRY].

後続アドレスファミリこのタイプは、後続アドレスファミリ識別子(SAFI)で使用する値を定義します。値は、IANAの「後続のアドレスファミリ識別子(SAFI)パラメータ」レジストリ[IANA-SAFI-REGISTRY]に基づいています。

3. IETF Routing Types YANG Module
3. IETFルーティングタイプYANGモジュール
   <CODE BEGINS> file "ietf-routing-types@2017-12-04.yang"
        
   module ietf-routing-types {
     namespace "urn:ietf:params:xml:ns:yang:ietf-routing-types";
     prefix rt-types;
        
     import ietf-yang-types {
       prefix yang;
     }
     import ietf-inet-types {
       prefix inet;
     }
        
     organization
       "IETF RTGWG - Routing Area Working Group";
     contact
       "WG Web:   <https://datatracker.ietf.org/wg/rtgwg/>
        WG List:  <mailto:rtgwg@ietf.org>
        
        Editors:  Xufeng Liu
                  <mailto:Xufeng_Liu@jabail.com>
                  Yingzhen Qu
                  <mailto:yingzhen.qu@huawei.com>
                  Acee Lindem
                  <mailto:acee@cisco.com>
                  Christian Hopps
                  <mailto:chopps@chopps.org>
                  Lou Berger
                  <mailto:lberger@labn.com>";
        

description "This module contains a collection of YANG data types considered generally useful for routing protocols.

説明「このモジュールには、ルーティングプロトコルに一般的に役立つと考えられるYANGデータタイプのコレクションが含まれています。

Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved.

Copyright(c)2017 IETF Trustおよびコードの作成者として識別された人物。全著作権所有。

Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info).

ソースおよびバイナリ形式での再配布および使用は、変更の有無にかかわらず、IETFドキュメントに関連するIETFトラストの法的規定のセクション4.cに記載されているSimplified BSD Licenseに準拠し、それに含まれるライセンス条項に従って許可されます( https://trustee.ietf.org/license-info)。

This version of this YANG module is part of RFC 8294; see the RFC itself for full legal notices.";

このYANGモジュールのこのバージョンはRFC 8294の一部です。完全な法的通知については、RFC自体を参照してください。 ";

      revision 2017-12-04 {
        description "Initial revision.";
        reference
          "RFC 8294: Common YANG Data Types for the Routing Area.
           Section 3.";
     }
        
     /*** Identities related to MPLS/GMPLS ***/
        
     identity mpls-label-special-purpose-value {
       description
         "Base identity for deriving identities describing
          special-purpose Multiprotocol Label Switching (MPLS) label
          values.";
       reference
         "RFC 7274: Allocating and Retiring Special-Purpose MPLS
          Labels.";
     }
        
     identity ipv4-explicit-null-label {
       base mpls-label-special-purpose-value;
       description
         "This identity represents the IPv4 Explicit NULL Label.";
       reference
         "RFC 3032: MPLS Label Stack Encoding.  Section 2.1.";
     }
        
     identity router-alert-label {
       base mpls-label-special-purpose-value;
       description
         "This identity represents the Router Alert Label.";
       reference
         "RFC 3032: MPLS Label Stack Encoding.  Section 2.1.";
     }
        
     identity ipv6-explicit-null-label {
       base mpls-label-special-purpose-value;
       description
         "This identity represents the IPv6 Explicit NULL Label.";
       reference
         "RFC 3032: MPLS Label Stack Encoding.  Section 2.1.";
     }
     identity implicit-null-label {
       base mpls-label-special-purpose-value;
       description
         "This identity represents the Implicit NULL Label.";
       reference
         "RFC 3032: MPLS Label Stack Encoding.  Section 2.1.";
     }
        
     identity entropy-label-indicator {
       base mpls-label-special-purpose-value;
       description
         "This identity represents the Entropy Label Indicator.";
       reference
         "RFC 6790: The Use of Entropy Labels in MPLS Forwarding.
          Sections 3 and 10.1.";
     }
        
     identity gal-label {
       base mpls-label-special-purpose-value;
       description
         "This identity represents the Generic Associated Channel
          (G-ACh) Label (GAL).";
       reference
         "RFC 5586: MPLS Generic Associated Channel.
          Sections 4 and 10.";
     }
        
     identity oam-alert-label {
       base mpls-label-special-purpose-value;
       description
         "This identity represents the OAM Alert Label.";
       reference
         "RFC 3429: Assignment of the 'OAM Alert Label' for
          Multiprotocol Label Switching Architecture (MPLS)
          Operation and Maintenance (OAM) Functions.
          Sections 3 and 6.";
     }
        
     identity extension-label {
       base mpls-label-special-purpose-value;
       description
         "This identity represents the Extension Label.";
       reference
         "RFC 7274: Allocating and Retiring Special-Purpose MPLS
          Labels.  Sections 3.1 and 5.";
     }
        
     /*** Collection of types related to routing ***/
        
     typedef router-id {
       type yang:dotted-quad;
       description
         "A 32-bit number in the dotted-quad format assigned to each
          router.  This number uniquely identifies the router within
          an Autonomous System.";
     }
        
     /*** Collection of types related to VPNs ***/
        
     typedef route-target {
       type string {
         pattern
           '(0:(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|'
         +     '6[0-4][0-9]{3}|'
         +     '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0):(429496729[0-5]|'
         +     '42949672[0-8][0-9]|'
         +     '4294967[01][0-9]{2}|429496[0-6][0-9]{3}|'
         +     '42949[0-5][0-9]{4}|'
         +     '4294[0-8][0-9]{5}|429[0-3][0-9]{6}|'
         +     '42[0-8][0-9]{7}|4[01][0-9]{8}|'
         +     '[1-3][0-9]{9}|[1-9][0-9]{0,8}|0))|'
         + '(1:((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|'
         +     '25[0-5])\.){3}([0-9]|[1-9][0-9]|'
         +     '1[0-9]{2}|2[0-4][0-9]|25[0-5])):(6553[0-5]|'
         +     '655[0-2][0-9]|'
         +     '65[0-4][0-9]{2}|6[0-4][0-9]{3}|'
         +     '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))|'
         + '(2:(429496729[0-5]|42949672[0-8][0-9]|'
         +     '4294967[01][0-9]{2}|'
         +     '429496[0-6][0-9]{3}|42949[0-5][0-9]{4}|'
         +     '4294[0-8][0-9]{5}|'
         +     '429[0-3][0-9]{6}|42[0-8][0-9]{7}|4[01][0-9]{8}|'
         +     '[1-3][0-9]{9}|[1-9][0-9]{0,8}|0):'
         +     '(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|'
         +     '6[0-4][0-9]{3}|'
         +     '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))|'
         + '(6(:[a-fA-F0-9]{2}){6})|'
         + '(([3-57-9a-fA-F]|[1-9a-fA-F][0-9a-fA-F]{1,3}):'
         +     '[0-9a-fA-F]{1,12})';
       }
       description
         "A Route Target is an 8-octet BGP extended community
          initially identifying a set of sites in a BGP VPN
          (RFC 4364).  However, it has since taken on a more general
          role in BGP route filtering.  A Route Target consists of two
          or three fields: a 2-octet Type field, an administrator
          field, and, optionally, an assigned number field.
        

According to the data formats for types 0, 1, 2, and 6 as defined in RFC 4360, RFC 5668, and RFC 7432, the encoding pattern is defined as:

RFC 4360、RFC 5668、およびRFC 7432で定義されているタイプ0、1、2、および6のデータ形式によれば、エンコーディングパターンは次のように定義されています。

          0:2-octet-asn:4-octet-number
          1:4-octet-ipv4addr:2-octet-number
          2:4-octet-asn:2-octet-number
          6:6-octet-mac-address
        

Additionally, a generic pattern is defined for future Route Target types:

さらに、将来のルートターゲットタイプ用に一般的なパターンが定義されています。

2-octet-other-hex-number:6-octet-hex-number

2-octet-other-hex-number:6-octet-hex-number

          Some valid examples are 0:100:100, 1:1.1.1.1:100,
          2:1234567890:203, and 6:26:00:08:92:78:00.";
       reference
         "RFC 4360: BGP Extended Communities Attribute.
          RFC 4364: BGP/MPLS IP Virtual Private Networks (VPNs).
          RFC 5668: 4-Octet AS Specific BGP Extended Community.
          RFC 7432: BGP MPLS-Based Ethernet VPN.";
     }
     typedef ipv6-route-target {
       type string {
         pattern
             '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
             + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
             + '(((25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.){3}'
             + '(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])))'
             + ':'
             + '(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|'
             + '6[0-4][0-9]{3}|'
             + '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0)';
         pattern '((([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
             + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?))'
             + ':'
             + '(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|'
             + '6[0-4][0-9]{3}|'
             + '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0)';
       }
       description
         "An IPv6 Route Target is a 20-octet BGP IPv6 Address
          Specific Extended Community serving the same function
          as a standard 8-octet Route Target, except that it only
          allows an IPv6 address as the global administrator.
          The format is <ipv6-address:2-octet-number>.
        
          Two valid examples are 2001:db8::1:6544 and
          2001:db8::5eb1:791:6b37:17958.";
       reference
         "RFC 5701: IPv6 Address Specific BGP Extended Community
          Attribute.";
     }
        
     typedef route-target-type {
       type enumeration {
         enum import {
           value 0;
           description
             "The Route Target applies to route import.";
         }
         enum export {
           value 1;
           description
             "The Route Target applies to route export.";
         }
         enum both {
           value 2;
           description
             "The Route Target applies to both route import and
              route export.";
         }
       }
       description
         "Indicates the role a Route Target takes in route filtering.";
       reference
         "RFC 4364: BGP/MPLS IP Virtual Private Networks (VPNs).";
     }
        
     typedef route-distinguisher {
       type string {
         pattern
           '(0:(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|'
         +     '6[0-4][0-9]{3}|'
         +     '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0):(429496729[0-5]|'
         +     '42949672[0-8][0-9]|'
         +     '4294967[01][0-9]{2}|429496[0-6][0-9]{3}|'
         +     '42949[0-5][0-9]{4}|'
         +     '4294[0-8][0-9]{5}|429[0-3][0-9]{6}|'
         +     '42[0-8][0-9]{7}|4[01][0-9]{8}|'
         +     '[1-3][0-9]{9}|[1-9][0-9]{0,8}|0))|'
         + '(1:((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|'
         +     '25[0-5])\.){3}([0-9]|[1-9][0-9]|'
         +     '1[0-9]{2}|2[0-4][0-9]|25[0-5])):(6553[0-5]|'
         +     '655[0-2][0-9]|'
         +     '65[0-4][0-9]{2}|6[0-4][0-9]{3}|'
         +     '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))|'
         + '(2:(429496729[0-5]|42949672[0-8][0-9]|'
         +     '4294967[01][0-9]{2}|'
         +     '429496[0-6][0-9]{3}|42949[0-5][0-9]{4}|'
         +     '4294[0-8][0-9]{5}|'
         +     '429[0-3][0-9]{6}|42[0-8][0-9]{7}|4[01][0-9]{8}|'
         +     '[1-3][0-9]{9}|[1-9][0-9]{0,8}|0):'
         +     '(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|'
         +     '6[0-4][0-9]{3}|'
         +     '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))|'
         + '(6(:[a-fA-F0-9]{2}){6})|'
         + '(([3-57-9a-fA-F]|[1-9a-fA-F][0-9a-fA-F]{1,3}):'
         +     '[0-9a-fA-F]{1,12})';
       }
       description
         "A Route Distinguisher is an 8-octet value used to
          distinguish routes from different BGP VPNs (RFC 4364).
          A Route Distinguisher will have the same format as a
          Route Target as per RFC 4360 and will consist of
          two or three fields: a 2-octet Type field, an administrator
          field, and, optionally, an assigned number field.
        

According to the data formats for types 0, 1, 2, and 6 as defined in RFC 4360, RFC 5668, and RFC 7432, the encoding pattern is defined as:

RFC 4360、RFC 5668、およびRFC 7432で定義されているタイプ0、1、2、および6のデータ形式によれば、エンコーディングパターンは次のように定義されています。

          0:2-octet-asn:4-octet-number
          1:4-octet-ipv4addr:2-octet-number
          2:4-octet-asn:2-octet-number
          6:6-octet-mac-address
        

Additionally, a generic pattern is defined for future route discriminator types:

さらに、一般的なパターンは、将来のルート弁別子タイプに対して定義されます。

2-octet-other-hex-number:6-octet-hex-number

2-octet-other-hex-number:6-octet-hex-number

          Some valid examples are 0:100:100, 1:1.1.1.1:100,
          2:1234567890:203, and 6:26:00:08:92:78:00.";
       reference
         "RFC 4360: BGP Extended Communities Attribute.
          RFC 4364: BGP/MPLS IP Virtual Private Networks (VPNs).
          RFC 5668: 4-Octet AS Specific BGP Extended Community.
          RFC 7432: BGP MPLS-Based Ethernet VPN.";
     }
     typedef route-origin {
       type string {
         pattern
           '(0:(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|'
         +     '6[0-4][0-9]{3}|'
         +     '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0):(429496729[0-5]|'
         +     '42949672[0-8][0-9]|'
         +     '4294967[01][0-9]{2}|429496[0-6][0-9]{3}|'
         +     '42949[0-5][0-9]{4}|'
         +     '4294[0-8][0-9]{5}|429[0-3][0-9]{6}|'
         +     '42[0-8][0-9]{7}|4[01][0-9]{8}|'
         +     '[1-3][0-9]{9}|[1-9][0-9]{0,8}|0))|'
         + '(1:((([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|'
         +     '25[0-5])\.){3}([0-9]|[1-9][0-9]|'
         +     '1[0-9]{2}|2[0-4][0-9]|25[0-5])):(6553[0-5]|'
         +     '655[0-2][0-9]|'
         +     '65[0-4][0-9]{2}|6[0-4][0-9]{3}|'
         +     '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))|'
         + '(2:(429496729[0-5]|42949672[0-8][0-9]|'
         +     '4294967[01][0-9]{2}|'
         +     '429496[0-6][0-9]{3}|42949[0-5][0-9]{4}|'
         +     '4294[0-8][0-9]{5}|'
         +     '429[0-3][0-9]{6}|42[0-8][0-9]{7}|4[01][0-9]{8}|'
         +     '[1-3][0-9]{9}|[1-9][0-9]{0,8}|0):'
         +     '(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|'
         +     '6[0-4][0-9]{3}|'
         +     '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0))|'
         + '(6(:[a-fA-F0-9]{2}){6})|'
         + '(([3-57-9a-fA-F]|[1-9a-fA-F][0-9a-fA-F]{1,3}):'
         +    '[0-9a-fA-F]{1,12})';
       }
       description
         "A Route Origin is an 8-octet BGP extended community
          identifying the set of sites where the BGP route
          originated (RFC 4364).  A Route Origin will have the same
          format as a Route Target as per RFC 4360 and will consist
          of two or three fields: a 2-octet Type field, an
          administrator field, and, optionally, an assigned number
          field.
        

According to the data formats for types 0, 1, 2, and 6 as defined in RFC 4360, RFC 5668, and RFC 7432, the encoding pattern is defined as:

RFC 4360、RFC 5668、およびRFC 7432で定義されているタイプ0、1、2、および6のデータ形式によれば、エンコーディングパターンは次のように定義されています。

0:2-octet-asn:4-octet-number 1:4-octet-ipv4addr:2-octet-number 2:4-octet-asn:2-octet-number 6:6-octet-mac-address Additionally, a generic pattern is defined for future Route Origin types:

0:2-octet-asn:4-octet-number 1:4-octet-ipv4addr:2-octet-number 2:4-octet-asn:2-octet-number 6:6-octet-mac-addressさらに、一般的なパターンは、将来のルート起点タイプに対して定義されます。

2-octet-other-hex-number:6-octet-hex-number

2-octet-other-hex-number:6-octet-hex-number

          Some valid examples are 0:100:100, 1:1.1.1.1:100,
          2:1234567890:203, and 6:26:00:08:92:78:00.";
       reference
         "RFC 4360: BGP Extended Communities Attribute.
          RFC 4364: BGP/MPLS IP Virtual Private Networks (VPNs).
          RFC 5668: 4-Octet AS Specific BGP Extended Community.
          RFC 7432: BGP MPLS-Based Ethernet VPN.";
     }
        
     typedef ipv6-route-origin {
       type string {
         pattern
             '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
             + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
             + '(((25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.){3}'
             + '(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])))'
             + ':'
             + '(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|'
             + '6[0-4][0-9]{3}|'
             + '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0)';
         pattern '((([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
             + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?))'
             + ':'
             + '(6553[0-5]|655[0-2][0-9]|65[0-4][0-9]{2}|'
             + '6[0-4][0-9]{3}|'
             + '[1-5][0-9]{4}|[1-9][0-9]{0,3}|0)';
       }
       description
         "An IPv6 Route Origin is a 20-octet BGP IPv6 Address
          Specific Extended Community serving the same function
          as a standard 8-octet route, except that it only allows
          an IPv6 address as the global administrator.  The format
          is <ipv6-address:2-octet-number>.
        
          Two valid examples are 2001:db8::1:6544 and
          2001:db8::5eb1:791:6b37:17958.";
       reference
         "RFC 5701: IPv6 Address Specific BGP Extended Community
          Attribute.";
     }
        
     /*** Collection of types common to multicast ***/
        
     typedef ipv4-multicast-group-address {
       type inet:ipv4-address {
         pattern '(2((2[4-9])|(3[0-9]))\.).*';
       }
       description
         "This type represents an IPv4 multicast group address,
          which is in the range of 224.0.0.0 to 239.255.255.255.";
       reference
         "RFC 1112: Host Extensions for IP Multicasting.";
     }
        
     typedef ipv6-multicast-group-address {
       type inet:ipv6-address {
         pattern '(([fF]{2}[0-9a-fA-F]{2}):).*';
       }
       description
         "This type represents an IPv6 multicast group address,
          which is in the range of ff00::/8.";
       reference
         "RFC 4291: IP Version 6 Addressing Architecture.  Section 2.7.
          RFC 7346: IPv6 Multicast Address Scopes.";
     }
        
     typedef ip-multicast-group-address {
       type union {
         type ipv4-multicast-group-address;
         type ipv6-multicast-group-address;
       }
       description
         "This type represents a version-neutral IP multicast group
          address.  The format of the textual representation implies
          the IP version.";
     }
     typedef ipv4-multicast-source-address {
       type union {
         type enumeration {
           enum * {
             description
               "Any source address.";
           }
         }
         type inet:ipv4-address;
       }
       description
         "Multicast source IPv4 address type.";
     }
        
     typedef ipv6-multicast-source-address {
       type union {
         type enumeration {
           enum * {
             description
               "Any source address.";
           }
         }
         type inet:ipv6-address;
       }
       description
         "Multicast source IPv6 address type.";
     }
        
     /*** Collection of types common to protocols ***/
        
     typedef bandwidth-ieee-float32 {
       type string {
         pattern
           '0[xX](0((\.0?)?[pP](\+)?0?|(\.0?))|'
         + '1(\.([0-9a-fA-F]{0,5}[02468aAcCeE]?)?)?[pP](\+)?(12[0-7]|'
         + '1[01][0-9]|0?[0-9]?[0-9])?)';
       }
       description
         "Bandwidth in IEEE 754 floating-point 32-bit binary format:
          (-1)**(S) * 2**(Exponent-127) * (1 + Fraction),
          where Exponent uses 8 bits and Fraction uses 23 bits.
          The units are octets per second.
          The encoding format is the external hexadecimal-significant
          character sequences specified in IEEE 754 and ISO/IEC C99.
          The format is restricted to be normalized, non-negative, and
          non-fraction: 0x1.hhhhhhp{+}d, 0X1.HHHHHHP{+}D, or 0x0p0,
          where 'h' and 'H' are hexadecimal digits and 'd' and 'D' are
          integers in the range of [0..127].
        
          When six hexadecimal digits are used for 'hhhhhh' or
          'HHHHHH', the least significant digit must be an even
          number.  'x' and 'X' indicate hexadecimal; 'p' and 'P'
          indicate a power of two.  Some examples are 0x0p0, 0x1p10,
          and 0x1.abcde2p+20.";
       reference
         "IEEE Std 754-2008: IEEE Standard for Floating-Point
          Arithmetic.
          ISO/IEC C99: Information technology - Programming
          Languages - C.";
     }
        
     typedef link-access-type {
       type enumeration {
         enum broadcast {
           description
             "Specify broadcast multi-access network.";
         }
         enum non-broadcast-multiaccess {
           description
             "Specify Non-Broadcast Multi-Access (NBMA) network.";
         }
         enum point-to-multipoint {
           description
             "Specify point-to-multipoint network.";
         }
         enum point-to-point {
           description
             "Specify point-to-point network.";
         }
       }
       description
         "Link access type.";
     }
        
     typedef timer-multiplier {
       type uint8;
       description
         "The number of timer value intervals that should be
          interpreted as a failure.";
     }
     typedef timer-value-seconds16 {
       type union {
         type uint16 {
           range "1..65535";
         }
         type enumeration {
           enum infinity {
             description
               "The timer is set to infinity.";
           }
           enum not-set {
             description
               "The timer is not set.";
           }
         }
       }
       units "seconds";
       description
         "Timer value type, in seconds (16-bit range).";
     }
        
     typedef timer-value-seconds32 {
       type union {
         type uint32 {
           range "1..4294967295";
         }
         type enumeration {
           enum infinity {
             description
               "The timer is set to infinity.";
           }
           enum not-set {
             description
               "The timer is not set.";
           }
         }
       }
       units "seconds";
       description
         "Timer value type, in seconds (32-bit range).";
     }
     typedef timer-value-milliseconds {
       type union {
         type uint32 {
           range "1..4294967295";
         }
         type enumeration {
           enum infinity {
             description
               "The timer is set to infinity.";
           }
           enum not-set {
             description
               "The timer is not set.";
           }
         }
       }
       units "milliseconds";
       description
         "Timer value type, in milliseconds.";
     }
        
     typedef percentage {
       type uint8 {
         range "0..100";
       }
       description
         "Integer indicating a percentage value.";
     }
        
     typedef timeticks64 {
       type uint64;
       description
         "This type is based on the timeticks type defined in
          RFC 6991, but with 64-bit width.  It represents the time,
          modulo 2^64, in hundredths of a second between two epochs.";
       reference
         "RFC 6991: Common YANG Data Types.";
     }
        
     typedef uint24 {
       type uint32 {
         range "0..16777215";
       }
       description
         "24-bit unsigned integer.";
     }
        
     /*** Collection of types related to MPLS/GMPLS ***/
        
     typedef generalized-label {
       type binary;
       description
         "Generalized Label.  Nodes sending and receiving the
          Generalized Label are aware of the link-specific
          label context and type.";
       reference
         "RFC 3471: Generalized Multi-Protocol Label Switching (GMPLS)
          Signaling Functional Description.  Section 3.2.";
     }
        
     typedef mpls-label-special-purpose {
       type identityref {
         base mpls-label-special-purpose-value;
       }
       description
         "This type represents the special-purpose MPLS label values.";
       reference
         "RFC 3032: MPLS Label Stack Encoding.
          RFC 7274: Allocating and Retiring Special-Purpose MPLS
          Labels.";
     }
        
     typedef mpls-label-general-use {
       type uint32 {
         range "16..1048575";
       }
       description
         "The 20-bit label value in an MPLS label stack as specified
          in RFC 3032.  This label value does not include the
          encodings of Traffic Class and TTL (Time to Live).
          The label range specified by this type is for general use,
          with special-purpose MPLS label values excluded.";
       reference
         "RFC 3032: MPLS Label Stack Encoding.";
     }
     typedef mpls-label {
       type union {
         type mpls-label-special-purpose;
         type mpls-label-general-use;
       }
       description
         "The 20-bit label value in an MPLS label stack as specified
          in RFC 3032.  This label value does not include the
          encodings of Traffic Class and TTL.";
       reference
         "RFC 3032: MPLS Label Stack Encoding.";
     }
        
     /*** Groupings **/
        
     grouping mpls-label-stack {
       description
         "This grouping specifies an MPLS label stack.  The label
          stack is encoded as a list of label stack entries.  The
          list key is an identifier that indicates the relative
          ordering of each entry, with the lowest-value identifier
          corresponding to the top of the label stack.";
       container mpls-label-stack {
         description
           "Container for a list of MPLS label stack entries.";
         list entry {
           key "id";
           description
             "List of MPLS label stack entries.";
           leaf id {
             type uint8;
             description
               "Identifies the entry in a sequence of MPLS label
                stack entries.  An entry with a smaller identifier
                value precedes an entry with a larger identifier
                value in the label stack.  The value of this ID has
                no semantic meaning other than relative ordering
                and referencing the entry.";
           }
           leaf label {
             type rt-types:mpls-label;
             description
               "Label value.";
           }
           leaf ttl {
             type uint8;
             description
               "Time to Live (TTL).";
             reference
               "RFC 3032: MPLS Label Stack Encoding.";
           }
           leaf traffic-class {
             type uint8 {
               range "0..7";
             }
             description
               "Traffic Class (TC).";
             reference
               "RFC 5462: Multiprotocol Label Switching (MPLS) Label
                Stack Entry: 'EXP' Field Renamed to 'Traffic Class'
                Field.";
           }
         }
       }
     }
     grouping vpn-route-targets {
       description
         "A grouping that specifies Route Target import-export rules
          used in BGP-enabled VPNs.";
       reference
         "RFC 4364: BGP/MPLS IP Virtual Private Networks (VPNs).
          RFC 4664: Framework for Layer 2 Virtual Private Networks
          (L2VPNs).";
       list vpn-target {
         key "route-target";
         description
           "List of Route Targets.";
         leaf route-target {
           type rt-types:route-target;
           description
             "Route Target value.";
         }
         leaf route-target-type {
           type rt-types:route-target-type;
           mandatory true;
           description
             "Import/export type of the Route Target.";
         }
       }
     }
   }
        

<CODE ENDS>

<コード終了>

4. IANA Routing Types YANG Module
4. IANAルーティングタイプYANGモジュール
   <CODE BEGINS> file "iana-routing-types@2017-12-04.yang"
        
   module iana-routing-types {
     namespace "urn:ietf:params:xml:ns:yang:iana-routing-types";
     prefix iana-rt-types;
        

organization "IANA"; contact "Internet Assigned Numbers Authority

組織「IANA」; 「Internet Assigned Numbers Authority

        Postal: ICANN
                12025 Waterfront Drive, Suite 300
                Los Angeles, CA  90094-2536
                United States of America
        Tel:    +1 310 301 5800
        <mailto:iana@iana.org>";
        

description "This module contains a collection of YANG data types considered defined by IANA and used for routing protocols.

説明「このモジュールには、IANAによって定義され、ルーティングプロトコルに使用されると見なされるYANGデータ型のコレクションが含まれています。

Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved.

Copyright(c)2017 IETF Trustおよびコードの作成者として識別された人物。全著作権所有。

Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info).

ソースおよびバイナリ形式での再配布および使用は、変更の有無にかかわらず、IETFドキュメントに関連するIETFトラストの法的規定のセクション4.cに記載されているSimplified BSD Licenseに準拠し、それに含まれるライセンス条項に従って許可されます( https://trustee.ietf.org/license-info)。

This version of this YANG module is part of RFC 8294; see the RFC itself for full legal notices.";

このYANGモジュールのこのバージョンはRFC 8294の一部です。完全な法的通知については、RFC自体を参照してください。 ";

      revision 2017-12-04 {
        description "Initial revision.";
        reference
          "RFC 8294: Common YANG Data Types for the Routing Area.
           Section 4.";
     }
        
     /*** Collection of IANA types related to routing ***/
     /*** IANA Address Family enumeration ***/
        
     typedef address-family {
       type enumeration {
         enum ipv4 {
           value 1;
           description
             "IPv4 Address Family.";
         }
        
         enum ipv6 {
           value 2;
           description
             "IPv6 Address Family.";
         }
        
         enum nsap {
           value 3;
           description
             "OSI Network Service Access Point (NSAP) Address Family.";
         }
        
         enum hdlc {
           value 4;
           description
             "High-Level Data Link Control (HDLC) Address Family.";
         }
        
         enum bbn1822 {
           value 5;
           description
             "Bolt, Beranek, and Newman Report 1822 (BBN 1822)
              Address Family.";
         }
        
         enum ieee802 {
           value 6;
           description
             "IEEE 802 Committee Address Family
              (aka Media Access Control (MAC) address).";
         }
        
         enum e163 {
           value 7;
           description
             "ITU-T E.163 Address Family.";
         }
         enum e164 {
           value 8;
           description
             "ITU-T E.164 (Switched Multimegabit Data Service (SMDS),
              Frame Relay, ATM) Address Family.";
         }
        
         enum f69 {
           value 9;
           description
             "ITU-T F.69 (Telex) Address Family.";
         }
        
         enum x121 {
           value 10;
           description
             "ITU-T X.121 (X.25, Frame Relay) Address Family.";
         }
        
         enum ipx {
           value 11;
           description
             "Novell Internetwork Packet Exchange (IPX)
              Address Family.";
         }
        
         enum appletalk {
           value 12;
           description
             "Apple AppleTalk Address Family.";
         }
        
         enum decnet-iv {
           value 13;
           description
             "Digital Equipment DECnet Phase IV Address Family.";
         }
        
         enum vines {
           value 14;
           description
             "Banyan Vines Address Family.";
         }
         enum e164-nsap {
           value 15;
           description
             "ITU-T E.164 with NSAP sub-address Address Family.";
         }
        
         enum dns {
           value 16;
           description
             "Domain Name System (DNS) Address Family.";
         }
        
         enum distinguished-name {
           value 17;
           description
             "Distinguished Name Address Family.";
         }
        
         enum as-num {
           value 18;
           description
             "Autonomous System (AS) Number Address Family.";
         }
        
         enum xtp-v4 {
           value 19;
           description
             "Xpress Transport Protocol (XTP) over IPv4
              Address Family.";
         }
        
         enum xtp-v6 {
           value 20;
           description
             "XTP over IPv6 Address Family.";
         }
        
         enum xtp-native {
           value 21;
           description
             "XTP native mode Address Family.";
         }
        
         enum fc-port {
           value 22;
           description
             "Fibre Channel (FC) World-Wide Port Name Address Family.";
         }
         enum fc-node {
           value 23;
           description
             "FC World-Wide Node Name Address Family.";
         }
        
         enum gwid {
           value 24;
           description
             "ATM Gateway Identifier (GWID) Number Address Family.";
         }
        
         enum l2vpn {
           value 25;
           description
             "Layer 2 VPN (L2VPN) Address Family.";
         }
        
         enum mpls-tp-section-eid {
           value 26;
           description
             "MPLS Transport Profile (MPLS-TP) Section Endpoint
              Identifier Address Family.";
         }
        
         enum mpls-tp-lsp-eid {
           value 27;
           description
             "MPLS-TP Label Switched Path (LSP) Endpoint Identifier
              Address Family.";
         }
        
         enum mpls-tp-pwe-eid {
           value 28;
           description
             "MPLS-TP Pseudowire Endpoint Identifier Address Family.";
         }
        
         enum mt-v4 {
           value 29;
           description
             "Multi-Topology IPv4 Address Family.";
         }
         enum mt-v6 {
           value 30;
           description
             "Multi-Topology IPv6 Address Family.";
         }
        
         enum eigrp-common-sf {
           value 16384;
           description
             "Enhanced Interior Gateway Routing Protocol (EIGRP)
              Common Service Family Address Family.";
         }
        
         enum eigrp-v4-sf {
           value 16385;
           description
             "EIGRP IPv4 Service Family Address Family.";
         }
        
         enum eigrp-v6-sf {
           value 16386;
           description
             "EIGRP IPv6 Service Family Address Family.";
         }
        
         enum lcaf {
           value 16387;
           description
             "Locator/ID Separation Protocol (LISP)
              Canonical Address Format (LCAF) Address Family.";
         }
        
         enum bgp-ls {
           value 16388;
           description
             "Border Gateway Protocol - Link State (BGP-LS)
              Address Family.";
         }
        
         enum mac-48 {
           value 16389;
           description
             "IEEE 48-bit MAC Address Family.";
         }
         enum mac-64 {
           value 16390;
           description
             "IEEE 64-bit MAC Address Family.";
         }
        
         enum trill-oui {
           value 16391;
           description
             "Transparent Interconnection of Lots of Links (TRILL)
              IEEE Organizationally Unique Identifier (OUI)
              Address Family.";
         }
        
         enum trill-mac-24 {
           value 16392;
           description
             "TRILL final 3 octets of 48-bit MAC Address Family.";
         }
        
         enum trill-mac-40 {
           value 16393;
           description
             "TRILL final 5 octets of 64-bit MAC Address Family.";
         }
        
         enum ipv6-64 {
           value 16394;
           description
             "First 8 octets (64 bits) of IPv6 address
              Address Family.";
         }
        
         enum trill-rbridge-port-id {
           value 16395;
           description
             "TRILL Routing Bridge (RBridge) Port ID Address Family.";
         }
        
         enum trill-nickname {
           value 16396;
           description
             "TRILL Nickname Address Family.";
         }
       }
       description
         "Enumeration containing all the IANA-defined
          Address Families.";
        

}

     /*** Subsequent Address Family Identifiers (SAFIs) ***/
     /*** for multiprotocol BGP enumeration ***/
        
     typedef bgp-safi {
       type enumeration {
         enum unicast-safi {
           value 1;
           description
             "Unicast SAFI.";
         }
        
         enum multicast-safi {
           value 2;
           description
             "Multicast SAFI.";
         }
        
         enum labeled-unicast-safi {
           value 4;
           description
             "Labeled Unicast SAFI.";
         }
        
         enum multicast-vpn-safi {
           value 5;
           description
             "Multicast VPN SAFI.";
         }
        
         enum pseudowire-safi {
           value 6;
           description
             "Multi-segment Pseudowire VPN SAFI.";
         }
        
         enum tunnel-encap-safi {
           value 7;
           description
             "Tunnel Encap SAFI.";
         }
         enum mcast-vpls-safi {
           value 8;
           description
             "Multicast Virtual Private LAN Service (VPLS) SAFI.";
         }
        
         enum tunnel-safi {
           value 64;
           description
             "Tunnel SAFI.";
         }
        
         enum vpls-safi {
           value 65;
           description
             "VPLS SAFI.";
         }
        
         enum mdt-safi {
           value 66;
           description
             "Multicast Distribution Tree (MDT) SAFI.";
         }
        
         enum v4-over-v6-safi {
           value 67;
           description
             "IPv4 over IPv6 SAFI.";
         }
        
         enum v6-over-v4-safi {
           value 68;
           description
             "IPv6 over IPv4 SAFI.";
         }
        
         enum l1-vpn-auto-discovery-safi {
           value 69;
           description
             "Layer 1 VPN Auto-Discovery SAFI.";
         }
        
         enum evpn-safi {
           value 70;
           description
             "Ethernet VPN (EVPN) SAFI.";
         }
         enum bgp-ls-safi {
           value 71;
           description
             "BGP-LS SAFI.";
         }
        
         enum bgp-ls-vpn-safi {
           value 72;
           description
             "BGP-LS VPN SAFI.";
         }
        
         enum sr-te-safi {
           value 73;
           description
             "Segment Routing - Traffic Engineering (SR-TE) SAFI.";
         }
        
         enum labeled-vpn-safi {
           value 128;
           description
             "MPLS Labeled VPN SAFI.";
         }
        
         enum multicast-mpls-vpn-safi {
           value 129;
           description
             "Multicast for BGP/MPLS IP VPN SAFI.";
         }
        
         enum route-target-safi {
           value 132;
           description
             "Route Target SAFI.";
         }
        
         enum ipv4-flow-spec-safi {
           value 133;
           description
             "IPv4 Flow Specification SAFI.";
         }
        
         enum vpnv4-flow-spec-safi {
           value 134;
           description
             "IPv4 VPN Flow Specification SAFI.";
         }
         enum vpn-auto-discovery-safi {
           value 140;
           description
             "VPN Auto-Discovery SAFI.";
         }
       }
       description
         "Enumeration for BGP SAFI.";
       reference
         "RFC 4760: Multiprotocol Extensions for BGP-4.";
     }
   }
        

<CODE ENDS>

<コード終了>

5. IANA Considerations
5. IANAに関する考慮事項

This document registers the following namespace URIs in the "IETF XML Registry" [RFC3688]:

このドキュメントでは、「IETF XMLレジストリ」[RFC3688]に次の名前空間URIを登録しています。

URI: urn:ietf:params:xml:ns:yang:ietf-routing-types Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace.

URI:urn:ietf:params:xml:ns:yang:ietf-routing-types登録者の連絡先:IESG。 XML:なし。要求されたURIはXML名前空間です。

URI: urn:ietf:params:xml:ns:yang:iana-routing-types Registrant Contact: IANA. XML: N/A; the requested URI is an XML namespace.

URI:urn:ietf:params:xml:ns:yang:iana-routing-types登録者の連絡先:IANA。 XML:なし。要求されたURIはXML名前空間です。

This document registers the following YANG modules in the "YANG Module Names" registry [RFC6020]:

このドキュメントでは、「YANGモジュール名」レジストリ[RFC6020]に次のYANGモジュールを登録しています。

   Name:         ietf-routing-types
   Namespace:    urn:ietf:params:xml:ns:yang:ietf-routing-types
   Prefix:       rt-types
   Reference:    RFC 8294
        
   Name:         iana-routing-types
   Namespace:    urn:ietf:params:xml:ns:yang:iana-routing-types
   Prefix:       iana-rt-types
   Reference:    RFC 8294
        
5.1. IANA-Maintained iana-routing-types Module
5.1. IANAが維持するiana-routing-typesモジュール

This document defines the initial version of the IANA-maintained iana-routing-types YANG module (Section 4).

このドキュメントは、IANAが保守するiana-routing-types YANGモジュールの初期バージョンを定義しています(セクション4)。

The iana-routing-types YANG module is intended to reflect the "Address Family Numbers" registry [IANA-ADDRESS-FAMILY-REGISTRY] and the "Subsequent Address Family Identifiers (SAFI) Parameters" registry [IANA-SAFI-REGISTRY].

iana-routing-types YANGモジュールは、「アドレスファミリ番号」レジストリ[IANA-ADDRESS-FAMILY-REGISTRY]および「後続のアドレスファミリ識別子(SAFI)パラメータ」レジストリ[IANA-SAFI-REGISTRY]を反映することを目的としています。

IANA has added this note to the "iana-routing-types YANG Module" registry:

IANAはこのメモを「iana-routing-types YANG Module」レジストリに追加しました。

Address Families and Subsequent Address Families must not be directly added to the iana-routing-types YANG module. They must instead be respectively added to the "Address Family Numbers" and "Subsequent Address Family Identifiers (SAFI) Parameters" registries.

アドレスファミリと後続のアドレスファミリは、iana-routing-types YANGモジュールに直接追加しないでください。代わりに、「アドレスファミリ番号」および「後続のアドレスファミリ識別子(SAFI)パラメータ」レジストリにそれぞれ追加する必要があります。

When an Address Family or Subsequent Address Family is respectively added to the "Address Family Numbers" registry or the "Subsequent Address Family Identifiers (SAFI) Parameters" registry, a new "enum" statement must be added to the iana-routing-types YANG module. The name of the "enum" is the same as the corresponding Address Family or SAFI, except that it will be a valid YANG identifier in all lowercase and with hyphens separating individual words in compound identifiers. The following "enum" statement, and substatements thereof, should be defined:

アドレスファミリまたは後続のアドレスファミリがそれぞれ「アドレスファミリ番号」レジストリまたは「後続のアドレスファミリ識別子(SAFI)パラメータ」レジストリに追加される場合、新しい「列挙型」ステートメントをiana-routing-types YANGに追加する必要がありますモジュール。 「列挙型」の名前は、対応するアドレスファミリまたはSAFIと同じですが、すべて小文字の有効なYANG識別子であり、複合識別子の個々の単語をハイフンで区切ります。次の「列挙型」ステートメントとそのサブステートメントを定義する必要があります。

"enum": Contains the YANG enum identifier for the "address-family" (for Address Families) or "bgp-safi" (for Subsequent Address Families). This may be the same as the "address-family" or "bgp-safi", or it may be a shorter version to facilitate YANG identifier usage.

"enum": "address-family"(アドレスファミリの場合)または "bgp-safi"(後続のアドレスファミリの場合)のYANG enum識別子が含まれます。これは、「address-family」または「bgp-safi」と同じ場合もあれば、YANG識別子の使用を容易にするための短いバージョンの場合もあります。

"value": Contains the IANA-assigned value corresponding to the "address-family" (for Address Families) or "bgp-safi" (for Subsequent Address Families).

"value": "address-family"(アドレスファミリの場合)または "bgp-safi"(後続のアドレスファミリの場合)に対応するIANA割り当て値が含まれます。

"status": Include only if a registration has been deprecated (use the value "deprecated") or obsoleted (use the value "obsolete").

「ステータス」:登録が廃止された場合(値「deprecated」を使用)または廃止された場合(値「obsolete」を使用)のみを含めます。

"description": Replicate the description from the registry, if any. Insert line breaks as needed so that the line does not exceed 72 characters.

「説明」:存在する場合、レジストリから説明を複製します。必要に応じて改行を挿入し、行が72文字を超えないようにします。

"reference": Replicate the reference from the registry, if any, and add the title of the document.

「参照」:参照がある場合はレジストリから参照を複製し、ドキュメントのタイトルを追加します。

Unassigned or reserved values are not present in these modules.

未割り当てまたは予約済みの値は、これらのモジュールには存在しません。

When the iana-routing-types YANG module is updated, a new "revision" statement must be added in front of the existing revision statements.

iana-routing-types YANGモジュールが更新されると、既存のリビジョンステートメントの前に新しい「リビジョン」ステートメントを追加する必要があります。

IANA has added this new note to the "Address Family Numbers" and "Subsequent Address Family Identifiers (SAFI) Parameters" registries:

IANAは、「アドレスファミリ番号」および「後続のアドレスファミリ識別子(SAFI)パラメータ」レジストリにこの新しいメモを追加しました。

When this registry is modified, the YANG module iana-routing-types must be updated as defined in RFC 8294.

このレジストリを変更する場合、YANGモジュールiana-routing-typesをRFC 8294で定義されているように更新する必要があります。

6. Security Considerations
6. セキュリティに関する考慮事項

This document defines common routing type definitions (i.e., typedef statements) using the YANG data modeling language. The definitions themselves have no security or privacy impact on the Internet, but the usage of these definitions in concrete YANG modules might have. The security considerations spelled out in the YANG 1.1 specification [RFC7950] apply for this document as well.

このドキュメントでは、YANGデータモデリング言語を使用して、一般的なルーティングタイプの定義(typedefステートメントなど)を定義しています。定義自体はインターネットに対するセキュリティやプライバシーへの影響はありませんが、具体的なYANGモジュールでのこれらの定義の使用には影響がある可能性があります。 YANG 1.1仕様[RFC7950]に明記されているセキュリティの考慮事項は、このドキュメントにも適用されます。

7. References
7. 参考文献
7.1. Normative References
7.1. 引用文献

[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004, <https://www.rfc-editor.org/info/rfc3688>.

[RFC3688] Mealling、M。、「The IETF XML Registry」、BCP 81、RFC 3688、DOI 10.17487 / RFC3688、2004年1月、<https://www.rfc-editor.org/info/rfc3688>。

[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, October 2010, <https://www.rfc-editor.org/info/rfc6020>.

[RFC6020] Bjorklund、M。、編、「YANG-ネットワーク構成プロトコル(NETCONF)のデータモデリング言語」、RFC 6020、DOI 10.17487 / RFC6020、2010年10月、<https://www.rfc-editor。 org / info / rfc6020>。

[RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types", RFC 6991, DOI 10.17487/RFC6991, July 2013, <https://www.rfc-editor.org/info/rfc6991>.

[RFC6991] Schoenwaelder、J。、編、「Common YANG Data Types」、RFC 6991、DOI 10.17487 / RFC6991、2013年7月、<https://www.rfc-editor.org/info/rfc6991>。

[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, August 2016, <https://www.rfc-editor.org/info/rfc7950>.

[RFC7950] Bjorklund、M。、編、「The YANG 1.1 Data Modeling Language」、RFC 7950、DOI 10.17487 / RFC7950、2016年8月、<https://www.rfc-editor.org/info/rfc7950>。

[IANA-ADDRESS-FAMILY-REGISTRY] "IANA Address Family Numbers Registry", <https://www.iana.org/assignments/ address-family-numbers/>.

[IANA-ADDRESS-FAMILY-REGISTRY]「IANAアドレスファミリー番号レジストリ」、<https://www.iana.org/assignments/ address-family-numbers />。

[IANA-SAFI-REGISTRY] "IANA Subsequent Address Family Identifiers (SAFI) Parameters Registry", <https://www.iana.org/assignments/safi-namespace/>.

[IANA-SAFI-REGISTRY]「IANA Subsequent Address Family Identifiers(SAFI)Parameters Registry」、<https://www.iana.org/assignments/safi-namespace/>。

7.2. Informative References
7.2. 参考引用

[IEEE754] IEEE, "IEEE Standard for Floating-Point Arithmetic", IEEE 754-2008, DOI 10.1109/IEEESTD.2008.4610935.

[IEEE754] IEEE、「IEEE Standard for Floating-Point Arithmetic」、IEEE 754-2008、DOI 10.1109 / IEEESTD.2008.4610935。

[BGP-Model] Shaikh, A., Ed., Shakir, R., Ed., Patel, K., Ed., Hares, S., Ed., D'Souza, K., Bansal, D., Clemm, A., Zhdankin, A., Jethanandani, M., and X. Liu, "BGP Model for Service Provider Networks", Work in Progress, draft-ietf-idr-bgp-model-02, July 2016.

[BGPモデル] Shaikh、A.、Ed。、Shakir、R.、Ed。、Patel、K.、Ed。、Hares、S.、Ed。、D'Souza、K.、Bansal、D.、Clemm 、A.、Zhdankin、A.、Jethanandani、M。、およびX. Liu、「BGP Model for Service Provider Networks」、Work in Progress、draft-ietf-idr-bgp-model-02、2016年7月。

[OSPF-YANG] Yeung, D., Qu, Y., Zhang, J., Chen, I., and A. Lindem, "Yang Data Model for OSPF Protocol", Work in Progress, draft-ietf-ospf-yang-09, October 2017.

[OSPF-YANG] Yeung、D.、Qu、Y.、Zhang、J.、Chen、I。、およびA. Lindem、「OSPFプロトコルのヤンデータモデル」、作業中、draft-ietf-ospf-yang -09、2017年10月。

[PIM-YANG] Liu, X., McAllister, P., Peter, A., Sivakumar, M., Liu, Y., and F. Hu, "A YANG data model for Protocol-Independent Multicast (PIM)", Work in Progress, draft-ietf-pim-yang-12, December 2017.

[PIM-YANG] Liu、X.、McAllister、P.、Peter、A.、Sivakumar、M.、Liu、Y。、およびF. Hu、「プロトコル非依存マルチキャスト(PIM)のYANGデータモデル」、 Work in Progress、draft-ietf-pim-yang-12、2017年12月。

[TE-YANG] Saad, T., Ed., Gandhi, R., Liu, X., Beeram, V., Shah, H., and I. Bryskin, "A YANG Data Model for Traffic Engineering Tunnels and Interfaces", Work in Progress, draft-ietf-teas-yang-te-09, October 2017.

[TE-YANG] Saad、T.、Ed。、Gandhi、R.、Liu、X.、Beeram、V.、Shah、H.、I。Bryskin、「トラフィックエンジニアリングトンネルとインターフェースのYANGデータモデル」 、Work in Progress、draft-ietf-teas-yang-te-09、2017年10月。

[L2VPN-YANG] Shah, H., Ed., Brissette, P., Ed., Chen, I., Ed., Hussain, I., Ed., Wen, B., Ed., and K. Tiruveedhula, Ed., "YANG Data Model for MPLS-based L2VPN", Work in Progress, draft-ietf-bess-l2vpn-yang-07, September 2017.

[L2VPN-YANG] Shah、H.、Ed。、Brissette、P.、Ed。、Chen、I.、Ed。、Hussain、I.、Ed。、Wen、B.、Ed。、およびK. Tiruveedhula、 Ed。、「MPLSベースのL2VPNのYANGデータモデル」、Work in Progress、draft-ietf-bess-l2vpn-yang-07、2017年9月。

[MPLS-Base-YANG] Saad, T., Raza, K., Gandhi, R., Liu, X., Beeram, V., Shah, H., Bryskin, I., Chen, X., Jones, R., and B. Wen, "A YANG Data Model for MPLS Base", Work in Progress, draft-ietf-mpls-base-yang-05, July 2017.

[MPLS-Base-YANG] Saad、T.、Raza、K.、Gandhi、R.、Liu、X.、Beeram、V.、Shah、H.、Bryskin、I.、Chen、X.、Jones、R 、およびB.ウェン、「MPLSベースのYANGデータモデル」、進行中の作業、draft-ietf-mpls-base-yang-05、2017年7月。

[RFC3032] Rosen, E., Tappan, D., Fedorkow, G., Rekhter, Y., Farinacci, D., Li, T., and A. Conta, "MPLS Label Stack Encoding", RFC 3032, DOI 10.17487/RFC3032, January 2001, <https://www.rfc-editor.org/info/rfc3032>.

[RFC3032]ローゼン、E。、タッパン、D。、フェドルコフ、G。、レクター、Y。、ファリナッチ、D。、リー、T。、およびA.コンタ、「MPLSラベルスタックエンコーディング」、RFC 3032、DOI 10.17487 / RFC3032、2001年1月、<https://www.rfc-editor.org/info/rfc3032>。

[RFC3209] Awduche, D., Berger, L., Gan, D., Li, T., Srinivasan, V., and G. Swallow, "RSVP-TE: Extensions to RSVP for LSP Tunnels", RFC 3209, DOI 10.17487/RFC3209, December 2001, <https://www.rfc-editor.org/info/rfc3209>.

[RFC3209] Awduche、D.、Berger、L.、Gan、D.、Li、T.、Srinivasan、V。、およびG. Swallow、「RSVP-TE:Extensions for RSVP for LSP Tunnels」、RFC 3209、DOI 10.17487 / RFC3209、2001年12月、<https://www.rfc-editor.org/info/rfc3209>。

[RFC3471] Berger, L., Ed., "Generalized Multi-Protocol Label Switching (GMPLS) Signaling Functional Description", RFC 3471, DOI 10.17487/RFC3471, January 2003, <https://www.rfc-editor.org/info/rfc3471>.

[RFC3471] Berger、L.、Ed。、「Generalized Multi-Protocol Label Switching(GMPLS)Signaling Functional Description」、RFC 3471、DOI 10.17487 / RFC3471、2003年1月、<https://www.rfc-editor.org/ info / rfc3471>。

[RFC4364] Rosen, E. and Y. Rekhter, "BGP/MPLS IP Virtual Private Networks (VPNs)", RFC 4364, DOI 10.17487/RFC4364, February 2006, <https://www.rfc-editor.org/info/rfc4364>.

[RFC4364]ローゼン、E。およびY.レクター、「BGP / MPLS IP仮想プライベートネットワーク(VPN)」、RFC 4364、DOI 10.17487 / RFC4364、2006年2月、<https://www.rfc-editor.org/info / rfc4364>。

[RFC4664] Andersson, L., Ed., and E. Rosen, Ed., "Framework for Layer 2 Virtual Private Networks (L2VPNs)", RFC 4664, DOI 10.17487/RFC4664, September 2006, <https://www.rfc-editor.org/info/rfc4664>.

[RFC4664] Andersson、L.、Ed。およびE. Rosen、Ed。、「Framework for Layer 2 Virtual Private Networks(L2VPNs)」、RFC 4664、DOI 10.17487 / RFC4664、2006年9月、<https:// www。 rfc-editor.org/info/rfc4664>。

[RFC5701] Rekhter, Y., "IPv6 Address Specific BGP Extended Community Attribute", RFC 5701, DOI 10.17487/RFC5701, November 2009, <https://www.rfc-editor.org/info/rfc5701>.

[RFC5701] Rekhter、Y。、「IPv6アドレス固有のBGP拡張コミュニティ属性」、RFC 5701、DOI 10.17487 / RFC5701、2009年11月、<https://www.rfc-editor.org/info/rfc5701>。

[RFC5880] Katz, D. and D. Ward, "Bidirectional Forwarding Detection (BFD)", RFC 5880, DOI 10.17487/RFC5880, June 2010, <https://www.rfc-editor.org/info/rfc5880>.

[RFC5880] Katz、D。およびD. Ward、「Bidirectional Forwarding Detection(BFD)」、RFC 5880、DOI 10.17487 / RFC5880、2010年6月、<https://www.rfc-editor.org/info/rfc5880>。

[RFC7274] Kompella, K., Andersson, L., and A. Farrel, "Allocating and Retiring Special-Purpose MPLS Labels", RFC 7274, DOI 10.17487/RFC7274, June 2014, <https://www.rfc-editor.org/info/rfc7274>.

[RFC7274] Kompella、K.、Andersson、L。、およびA. Farrel、「特別な目的のMPLSラベルの割り当てと廃止」、RFC 7274、DOI 10.17487 / RFC7274、2014年6月、<https://www.rfc-editor .org / info / rfc7274>。

[RFC7432] Sajassi, A., Ed., Aggarwal, R., Bitar, N., Isaac, A., Uttaro, J., Drake, J., and W. Henderickx, "BGP MPLS-Based Ethernet VPN", RFC 7432, DOI 10.17487/RFC7432, February 2015, <https://www.rfc-editor.org/info/rfc7432>.

[RFC7432] Sajassi、A.、Ed。、Aggarwal、R.、Bitar、N.、Isaac、A.、Uttaro、J.、Drake、J.、and W. Henderickx、 "BGP MPLS-Based Ethernet VPN"、 RFC 7432、DOI 10.17487 / RFC7432、2015年2月、<https://www.rfc-editor.org/info/rfc7432>。

Acknowledgements

謝辞

The Routing Area YANG Architecture design team members included Acee Lindem, Anees Shaikh, Christian Hopps, Dean Bogdanovic, Ebben Aries, Lou Berger, Qin Wu, Rob Shakir, Xufeng Liu, and Yingzhen Qu.

ルーティングエリアのYANGアーキテクチャデザインチームメンバーには、Acee Lindem、Anees Shaikh、Christian Hopps、Dean Bogdanovic、Ebben Aries、Lou Berger、Qin Wu、Rob Shakir、Xufeng Liu、Yingzhen Quが含まれていました。

Thanks to Martin Bjorklund, Tom Petch, Stewart Bryant, and Radek Krejci for comments on the model and document text. Thanks to Jeff Haas and Robert Raszuk for suggestions for additional common routing types.

モデルとドキュメントテキストに関するコメントを提供してくれたMartin Bjorklund、Tom Petch、Stewart Bryant、およびRadek Krejciに感謝します。追加の一般的なルーティングタイプの提案をしてくれたJeff HaasとRobert Raszukに感謝します。

Authors' Addresses

著者のアドレス

Xufeng Liu Jabil 8281 Greensboro Drive, Suite 200 McLean, VA 22102

X U Feng L IU JA比8281 Greensboroドライブ、スイート200 McLean、VA 22102

United States of America Email: Xufeng_Liu@jabil.com

アメリカ合衆国Eメール:Xufeng_Liu@jabil.com

Yingzhen Qu Futurewei Technologies, Inc. 2330 Central Expressway Santa Clara, CA 95050 United States of America

ying true Q u future is technologies、Inc. 2330中央高速道路Santa Clara、CA 95050アメリカ合衆国

   Email: yingzhen.qu@huawei.com
        

Acee Lindem Cisco Systems 301 Midenhall Way Cary, NC 27513 United States of America

Acee Lindem Cisco Systems 301 Midenhall Way Cary、NC 27513アメリカ合衆国

   Email: acee@cisco.com
        

Christian Hopps Deutsche Telekom

クリスチャンホップスドイツテレコム

   Email: chopps@chopps.org
        

Lou Berger LabN Consulting, L.L.C.

Lou Berger LabNコンサルティング、L.L.C。

   Email: lberger@labn.net