[要約] RFC 10070は、OAuth 2.0のJWTクライアント認証およびアサーションベースの認可グラントで使われるaudience値の扱いを厳格化する標準化過程の文書で、RFC 7521、7522、7523、9126を更新します。認可サーバーに送るトークンのaudience値が曖昧なことに起因する脆弱性に対処するため、クライアント認証ではRFC 8414の発行者識別子を唯一のaudience値とし、認可サーバーはそれ以外を拒否しなければなりません。あわせて、クライアント認証JWTに明示的な型 client-authentication+jwt を与えて更新前後のトークンを区別できるようにし、SAMLアサーションによるクライアント認証は新規利用を禁止します。
Internet Engineering Task Force (IETF) M.B. Jones
Request for Comments: 10070 Self-Issued Consulting
Updates: 7521, 7522, 7523, 9126 B. Campbell
Category: Standards Track Ping Identity
ISSN: 2070-1721 C. Mortimore
Ticketmaster
F. Skokan
Okta
November 2026
This document updates RFCs 7521, 7522, 7523, and 9126 with respect to the treatment of audience values in OAuth 2.0 Client Assertion Authentication and Assertion-based Authorization Grants to address a security vulnerability identified in the previous requirements for those audience values in multiple OAuth 2.0 specifications.
本文書は、複数のOAuth 2.0仕様においてオーディエンス値に関する従来の要件に見つかったセキュリティ上の脆弱性に対処するため、OAuth 2.0クライアントアサーション認証およびアサーションベースの認可グラントにおけるオーディエンス値の扱いに関して、RFC 7521、7522、7523、9126を更新します。
This is an Internet Standards Track document.
本文書はInternet Standards Trackの文書です。
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.
本文書はInternet Engineering Task Force (IETF) の成果物です。IETFコミュニティのコンセンサスを表しています。本文書は公開レビューを受け、Internet Engineering Steering Group (IESG) により発行が承認されています。Internet Standardsの詳細については、RFC 7841の第2節を参照してください。
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc10070.
本文書の現在の状況、正誤表、およびフィードバックの方法に関する情報は、https://www.rfc-editor.org/info/rfc10070 で入手できます。
Copyright (c) 2026 IETF Trust and the persons identified as the document authors. All rights reserved.
Copyright (c) 2026 IETF Trustおよび本文書の著者として特定された人々。All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.
本文書は、本文書の発行日に有効なBCP 78およびIETF Trustの IETF文書に関する法的規定 (https://trustee.ietf.org/license-info) の適用を受けます。これらの文書は、本文書に関するあなたの権利と制限を記述しているため、注意深く確認してください。本文書から抽出されるコードコンポーネントには、Trust Legal Provisionsの第4節.eに記載されているRevised BSD Licenseの条文を含めなければならず、Revised BSD Licenseに記載されているとおり無保証で提供されます。
1. Introduction
1.1. Notational Conventions
1.2. Terminology
2. Updates to RFC 7521
3. Updates to RFC 7522
4. Updates to RFC 7523
4.1. Client Authentication JWT Example
5. Updates to RFC 9126
6. Operational Considerations
7. Security Considerations
8. IANA Considerations
8.1. Media Type Registration
8.1.1. Registry Contents
8.2. OAuth Token Endpoint Authentication Methods
8.2.1. Registry Contents
8.3. OAuth URI Registration Updates
9. References
9.1. Normative References
9.2. Informative References
Acknowledgements
Authors' Addresses
1. Introduction
1. はじめに
1.1. Notational Conventions
1.1. 表記上の規約
1.2. Terminology
1.2. 用語
2. Updates to RFC 7521
2. RFC 7521の更新
3. Updates to RFC 7522
3. RFC 7522の更新
4. Updates to RFC 7523
4. RFC 7523の更新
4.1. Client Authentication JWT Example
4.1. クライアント認証JWTの例
5. Updates to RFC 9126
5. RFC 9126の更新
6. Operational Considerations
6. 運用上の考慮事項
7. Security Considerations
7. セキュリティに関する考慮事項
8. IANA Considerations
8. IANAに関する考慮事項
8.1. Media Type Registration
8.1. メディアタイプの登録
8.1.1. Registry Contents
8.1.1. レジストリの内容
8.2. OAuth Token Endpoint Authentication Methods
8.2. OAuth トークンエンドポイント認証方式
8.2.1. Registry Contents
8.2.1. レジストリの内容
8.3. OAuth URI Registration Updates
8.3. OAuth URI 登録の更新
9. References
9. 参考文献
9.1. Normative References
9.1. 引用規範文献
9.2. Informative References
9.2. 参考情報文献
Acknowledgements
謝辞
Authors' Addresses
著者の連絡先
Multiple OAuth 2.0 specifications use tokens (also known as "assertions") that are sent to authorization servers. These tokens contain audience value(s) that identify the intended recipient(s). When the token is a JSON Web Token (JWT) [RFC7519], the audience value(s) are contained in the "aud" (audience) claim.
複数のOAuth 2.0仕様では、認可サーバーに送信されるトークン (「アサーション」とも呼ばれます) を使用します。これらのトークンには、意図された受信者を識別するオーディエンス値が含まれます。トークンがJSON Web Token (JWT) [RFC7519] の場合、オーディエンス値は "aud" (オーディエンス) クレームに含まれます。
When performing a security analysis of a pre-final version of the OpenID Federation specification [OpenID.Federation], University of Stuttgart security researchers Pedram Hosseyni, Dr. Ralf Küsters, and Tim Würtele discovered a vulnerability affecting multiple OpenID and OAuth specifications caused by ambiguities in the audience values of tokens sent to authorization servers. The vulnerability was disclosed to the OAuth Working Group in an interim meeting in January 2025 called for that purpose and a description of the vulnerability [private_key_jwt.Disclosure] was provided. A paper they published describing the attack is [Audience.Injection].
シュトゥットガルト大学のセキュリティ研究者であるPedram Hosseyni、Dr. Ralf Küsters、Tim Würtele は、OpenID Federation仕様 [OpenID.Federation] の最終版前の版のセキュリティ分析を行った際に、認可サーバーに送信されるトークンのオーディエンス値の曖昧さに起因する、複数のOpenID仕様およびOAuth仕様に影響する脆弱性を発見しました。この脆弱性は、2025年1月にその目的で招集された臨時会合でOAuthワーキンググループに開示され、脆弱性の説明 [private_key_jwt.Disclosure] が提供されました。この攻撃を説明する、彼らが発表した論文は [Audience.Injection] です。
This specification updates the affected OAuth specifications to address the security vulnerability that was identified. Specifically, it eliminates former choices in the audience values of tokens sent to OAuth 2.0 authorization servers. Section 3.3 of [RFC8414] requires that the client having retrieved the metadata validates the returned issuer value. Other endpoint values of the metadata cannot be directly validated and, if used as the audience when sent to a different endpoint, can open an attack vector.
本仕様は、特定されたセキュリティ上の脆弱性に対処するため、影響を受けるOAuth仕様を更新します。具体的には、OAuth 2.0認可サーバーに送信されるトークンのオーディエンス値について、従来あった選択肢を排除します。[RFC8414] の第3.3節は、メタデータを取得したクライアントが、返された issuer の値を検証することを要求しています。メタデータのその他のエンドポイント値は直接検証することができず、別のエンドポイントに送信される際のオーディエンスとして使用されると、攻撃ベクトルとなる可能性があります。
A general description of the updates made is to require that the issuer identifier URL of the authorization server, as defined in [RFC8414], be used as the sole value of the audience of the JWT client authentication assertion. Furthermore, the authorization server rejects any JWT client authentication assertion that does not contain its own issuer identifier as the sole audience value. An explicit type for the JWT client authentication assertion, as defined in [RFC8725], is also defined to facilitate distinguishing between tokens produced in accordance with specifications published prior to these updates and those incorporating them. Specific updates made to each affected specification follow.
This section updates "Assertion Framework for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7521] to tighten its audience requirements.
本セクションは、オーディエンスに関する要件を厳格化するため、"Assertion Framework for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7521] を更新します。
The description of the Audience parameter in Section 5.1 of [RFC7521] (Assertion Metamodel) is replaced as follows.
[RFC7521] の第5.1節 (Assertion Metamodel) にあるAudienceパラメーターの説明は、次のように置き換えられます。
OLD:
OLD:
Audience
Audience
A value that identifies the party or parties intended to process the assertion. The URL of the token endpoint, as defined in Section 3.2 of OAuth 2.0 [RFC6749], can be used to indicate that the authorization server is a valid intended audience of the assertion. In the absence of an application profile specifying otherwise, compliant applications MUST compare the Audience values using the Simple String Comparison method defined in Section 6.2.1 of RFC 3986 [RFC3986].
NEW:
NEW:
Audience
Audience
A value that identifies the party intended to process the assertion. The issuer identifier of the authorization server, as defined in [RFC8414], can be used to indicate that the authorization server is a valid intended audience of the assertion.
アサーションを処理することが意図された当事者を識別する値です。[RFC8414] で定義される認可サーバーの発行者識別子を使用して、認可サーバーがそのアサーションの有効な意図されたオーディエンスであることを示すことができます。
This section updates "Security Assertion Markup Language (SAML) 2.0 Profile for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7522]. It tightens its audience requirements for SAML authorization grants and it deprecates the use of SAML assertions for client authentication.
本セクションは、"Security Assertion Markup Language (SAML) 2.0 Profile for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7522] を更新します。SAML認可グラントに対するオーディエンスの要件を厳格化し、クライアント認証におけるSAMLアサーションの使用を非推奨とします。
The text and example in Section 2.2 of [RFC7522] (Using SAML Assertions for Client Authentication) is replaced as follows.
[RFC7522] の第2.2節 (Using SAML Assertions for Client Authentication) の本文と例は、次のように置き換えられます。
OLD:
OLD:
To use a SAML Bearer Assertion for client authentication, the client uses the following parameter values and encodings.
クライアント認証にSAML Bearer Assertionを使用するには、クライアントは次のパラメーター値とエンコーディングを使用します。
The value of the "client_assertion_type" parameter is "urn:ietf:params:oauth:client-assertion-type:saml2-bearer".
"client_assertion_type" パラメーターの値は "urn:ietf:params:oauth:client-assertion-type:saml2-bearer" です。
The value of the "client_assertion" parameter MUST contain a single SAML 2.0 Assertion. The SAML Assertion XML data MUST be encoded using base64url, where the encoding adheres to the definition in Section 5 of RFC 4648 [RFC4648] and where the padding bits are set to zero. To avoid the need for subsequent encoding steps (by "application/x-www-form-urlencoded" [W3C.REC-html401-19991224], for example), the base64url-encoded data SHOULD NOT be line wrapped and pad characters ("=") SHOULD NOT be included.
"client_assertion" パラメーターの値は、単一のSAML 2.0 Assertionを含まなければなりません (MUST)。SAML Assertion XMLデータは、base64urlを使用してエンコードしなければなりません (MUST)。このエンコーディングは、RFC 4648 [RFC4648] の第5節の定義に従い、パディングビットはゼロに設定されます。後続のエンコード手順 (たとえば "application/x-www-form-urlencoded" [W3C.REC-html401-19991224] によるもの) を不要にするため、base64urlエンコードされたデータは行折り返しをすべきではなく (SHOULD NOT)、パディング文字 ("=") を含めるべきではありません (SHOULD NOT)。
The following example demonstrates a client authenticating using an Assertion during the presentation of an authorization code grant in an access token request (with extra line breaks for display purposes only):
次の例は、アクセストークンリクエストにおいて認可コードグラントを提示する際に、クライアントがAssertionを使用して認証する様子を示しています (改行は表示のためだけに追加しています)。
POST /token.oauth2 HTTP/1.1
Host: as.example.com
Content-Type: application/x-www-form-urlencoded
grant_type=authorization_code&
code=n0esc3NRze7LTCu7iYzS6a5acc3f0ogp4&
client_assertion_type=urn%3Aietf%3Aparams%3Aoauth
%3Aclient-assertion-type%3Asaml2-bearer&
client_assertion=PHNhbW...[omitted for brevity]...ZT
NEW:
NEW:
SAML Bearer Assertions MUST NOT be used for client authentication for any new applications. Should any applications already be doing this in the manner described in Section 2.2 of [RFC7522], it is left to the discretion of their implementers and deployers whether to migrate away from this feature and/or potentially tighten the audience values used in a manner parallel to the changes being made to RFC 7523 by this specification.
SAML Bearer Assertionを、新規のアプリケーションにおけるクライアント認証に使用してはなりません (MUST NOT)。すでに [RFC7522] の第2.2節に記述された方法でこれを行っているアプリケーションがある場合、この機能から移行するかどうか、および/または本仕様によるRFC 7523の変更と同様の方法で使用するオーディエンス値を厳格化するかどうかは、その実装者および運用者の裁量に委ねられます。
The description of the Audience element in Item 2 of Section 3 of [RFC7522] (Assertion Format and Processing Requirements) is replaced as follows.
[RFC7522] の第3節 (Assertion Format and Processing Requirements) のItem 2にあるAudience要素の説明は、次のように置き換えられます。
OLD:
OLD:
The Assertion MUST contain a <Conditions> element with an <AudienceRestriction> element with an <Audience> element that identifies the authorization server as an intended audience. Section 2.5.1.4 of "Assertions and Protocols for the OASIS Security Assertion Markup Language (SAML) V2.0" [OASIS.saml-core-2.0-os] defines the <AudienceRestriction> and <Audience> elements and, in addition to the URI references discussed there, the token endpoint URL of the authorization server MAY be used as a URI that identifies the authorization server as an intended audience. The authorization server MUST reject any Assertion that does not contain its own identity as the intended audience. In the absence of an application profile specifying otherwise, compliant applications MUST compare the Audience values using the Simple String Comparison method defined in Section 6.2.1 of RFC 3986 [RFC3986]. As noted in Section 5, the precise strings to be used as the Audience for a given authorization server must be configured out of band by the authorization server and the issuer of the Assertion.
Assertionは、認可サーバーを意図されたオーディエンスの1つとして識別する <Audience> 要素を持つ <AudienceRestriction> 要素を含む <Conditions> 要素を含まなければなりません (MUST)。"Assertions and Protocols for the OASIS Security Assertion Markup Language (SAML) V2.0" [OASIS.saml-core-2.0-os] の第2.5.1.4節は <AudienceRestriction> 要素と <Audience> 要素を定義しており、そこで論じられているURI参照に加えて、認可サーバーのトークンエンドポイントURLを、認可サーバーを意図されたオーディエンスとして識別するURIとして使用してもよい (MAY)。認可サーバーは、自身のIDを意図されたオーディエンスとして含まないAssertionを拒否しなければなりません (MUST)。別途指定するアプリケーションプロファイルがない場合、準拠するアプリケーションは、RFC 3986 [RFC3986] の第6.2.1節で定義される単純文字列比較の方法を用いてAudience値を比較しなければなりません (MUST)。第5節に記載されているとおり、特定の認可サーバーのAudienceとして使用する正確な文字列は、認可サーバーとAssertionの発行者が帯域外で設定しなければなりません。
NEW:
NEW:
The Assertion MUST contain a <Conditions> element with an <AudienceRestriction> element with an <Audience> element that identifies the authorization server as the intended audience. The client is responsible for ensuring that the audience of the Assertion is appropriate for the authorization server to which it is sent. This MAY be the issuer identifier of the authorization server, the token endpoint URL of the authorization server, or a SAML Entity ID. Section 2.5.1.4 of "Assertions and Protocols for the OASIS Security Assertion Markup Language (SAML) V2.0" [OASIS.saml-core-2.0-os] defines the <AudienceRestriction> and <Audience> elements. The authorization server MUST reject any assertion that does not contain its own identity as the intended audience.
Assertionは、認可サーバーを意図されたオーディエンスとして識別する <Audience> 要素を持つ <AudienceRestriction> 要素を含む <Conditions> 要素を含まなければなりません (MUST)。クライアントは、Assertionのオーディエンスが、送信先の認可サーバーにとって適切であることを確実にする責任を負います。これは、認可サーバーの発行者識別子、認可サーバーのトークンエンドポイントURL、またはSAML Entity IDのいずれでもよい (MAY)。"Assertions and Protocols for the OASIS Security Assertion Markup Language (SAML) V2.0" [OASIS.saml-core-2.0-os] の第2.5.1.4節は <AudienceRestriction> 要素と <Audience> 要素を定義しています。認可サーバーは、自身のIDを意図されたオーディエンスとして含まないアサーションを拒否しなければなりません (MUST)。
This section updates "JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7523] to tighten its audience requirements.
本セクションは、オーディエンスに関する要件を厳格化するため、"JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7523] を更新します。
In Section 3 of [RFC7523] (JWT Format and Processing Requirements), Item 3, which describes the audience value, is replaced as follows.
[RFC7523] の第3節 (JWT Format and Processing Requirements) の項目3は、オーディエンスの値について述べていますが、次のように置き換えられます。
OLD:
OLD:
The JWT MUST contain an "aud" (audience) claim containing a value that identifies the authorization server as an intended audience. The token endpoint URL of the authorization server MAY be used as a value for an "aud" element to identify the authorization server as an intended audience of the JWT. The authorization server MUST reject any JWT that does not contain its own identity as the intended audience. In the absence of an application profile specifying otherwise, compliant applications MUST compare the audience values using the Simple String Comparison method defined in Section 6.2.1 of RFC 3986 [RFC3986]. As noted in Section 5, the precise strings to be used as the audience for a given authorization server must be configured out of band by the authorization server and the issuer of the JWT.
JWTは、認可サーバーを意図されたオーディエンスとして識別する値を含む "aud" (オーディエンス) クレームを含んでいなければなりません (MUST)。認可サーバーのトークンエンドポイントURLを、その認可サーバーをJWTの意図されたオーディエンスとして識別する "aud" 要素の値として使用してもよい (MAY)。認可サーバーは、自身の識別情報を意図されたオーディエンスとして含まないJWTを拒否しなければなりません (MUST)。別段の定めのあるアプリケーションプロファイルがない場合、準拠するアプリケーションは、RFC 3986 [RFC3986] の第6.2.1節で定義される単純文字列比較の手法を用いてオーディエンスの値を比較しなければなりません (MUST)。第5節で述べたとおり、特定の認可サーバーのオーディエンスとして使用する正確な文字列は、認可サーバーとJWTの発行者との間で、帯域外で設定されなければなりません。
NEW:
NEW:
The JWT MUST contain an "aud" (audience) claim containing a value that identifies the authorization server as the intended audience. Two cases are differentiated:
JWTは、認可サーバーを意図されたオーディエンスとして識別する値を含む "aud" (オーディエンス) クレームを含んでいなければなりません (MUST)。次の2つの場合を区別します。
A. For the authorization grant, the client is responsible for ensuring that the audience of the JWT assertion is appropriate for the authorization server to which it is sent. An authorization server MAY be identified by either its issuer identifier or its token endpoint URL.
A. 認可グラントの場合、クライアントは、JWTアサーションのオーディエンスが、送信先の認可サーバーにとって適切であることを確実にする責任を負います。認可サーバーは、その発行者識別子またはトークンエンドポイントURLのいずれかによって識別されてもよい (MAY)。
B. For client authentication, the "aud" (audience) claim value MUST use the issuer identifier [RFC8414] of the authorization server as its sole value. The authorization server MUST have an issuer identifier to be used with this specification. The "aud" claim value MUST indicate only the issuer identifier of the intended authorization server as the audience of the JWT; this includes that the token endpoint URL of the authorization server MUST NOT be used as an audience value. The authorization server MUST reject any JWT that does not contain its issuer identifier as its sole audience value.
B. クライアント認証の場合、"aud" (オーディエンス) クレームの値には、認可サーバーの発行者識別子 [RFC8414] を唯一の値として使用しなければなりません (MUST)。認可サーバーは、この仕様で使用するための発行者識別子を持っていなければなりません (MUST)。"aud" クレームの値は、意図された認可サーバーの発行者識別子のみを、JWTのオーディエンスとして示さなければなりません (MUST)。これには、認可サーバーのトークンエンドポイントURLをオーディエンスの値として使用してはならないこと (MUST NOT) も含まれます。認可サーバーは、自身の発行者識別子を唯一のオーディエンスの値として含まないJWTを拒否しなければなりません (MUST)。
In the absence of an application profile specifying otherwise, applications MUST compare the audience values using the Simple String Comparison method defined in Section 6.2.1 of [RFC3986].
別段の定めのあるアプリケーションプロファイルがない場合、アプリケーションは、[RFC3986] の第6.2.1節で定義される単純文字列比較の手法を用いてオーディエンスの値を比較しなければなりません (MUST)。
In Section 3.2 of [RFC7523] (Client Authentication Processing), the following requirement is added:
[RFC7523] の第3.2節 (Client Authentication Processing) に、次の要件が追加されます。
Client authentication JWTs SHOULD be explicitly typed by using the "typ" header parameter value "client-authentication+jwt" or another more specific explicit type value defined by a specification profiling this specification.
クライアント認証JWTは、"typ" ヘッダーパラメータの値として "client-authentication+jwt"、またはこの仕様をプロファイルする仕様で定義される、より具体的な別の明示的な型の値を用いて、明示的に型付けされるべきです (SHOULD)。
The introduction of strong typing for JWTs (using explicit "typ" values) serves as a signal to distinguish between tokens produced in accordance with specifications published prior to these updates and those incorporating them. However, the primary security protection comes from the tightened audience requirements. The use of explicit typing enables clients to signal their compliance with the requirements herein. However, since strong typing alone does not prevent the attacks described in [private_key_jwt.Disclosure] and [Audience.Injection], it is NOT RECOMMENDED for servers to reject JWTs that do not have explicit types. Such rejection would cause interoperability issues with clients that already conform to the tightened audience requirements but have not yet adopted explicit typing. This approach balances security signaling with practical deployment considerations, avoiding disruption to client deployments that already conform to the tightened audience requirements but have not yet adopted explicit typing.
JWTに対する強い型付け (明示的な "typ" 値の使用) の導入は、これらの更新より前に公開された仕様に従って生成されたトークンと、更新を取り入れたトークンとを区別するためのシグナルとして機能します。ただし、主たるセキュリティ上の保護は、厳格化されたオーディエンスの要件によってもたらされます。明示的な型付けを使用することで、クライアントはここでの要件への準拠を示すことができます。しかし、強い型付けだけでは [private_key_jwt.Disclosure] および [Audience.Injection] に記載されている攻撃を防げないため、サーバーが明示的な型を持たないJWTを拒否することは推奨されません (NOT RECOMMENDED)。そのような拒否は、厳格化されたオーディエンスの要件にすでに適合しているものの、まだ明示的な型付けを採用していないクライアントとの相互運用性の問題を引き起こします。このアプローチは、セキュリティ上のシグナリングと実際の展開上の考慮事項とのバランスをとり、厳格化されたオーディエンスの要件にすでに適合しているものの、まだ明示的な型付けを採用していないクライアントの展開に支障が生じることを避けるものです。
In Section 4 of [RFC7523] (Authorization Grant Example), the sentence below is replaced as follows.
[RFC7523] の第4節 (Authorization Grant Example) にある次の文は、次のように置き換えられます。
OLD:
OLD:
The intended audience of the JWT is "https://jwt-rp.example.net", which is an identifier with which the authorization server identifies itself.
JWTの意図されたオーディエンスは "https://jwt-rp.example.net" であり、これは認可サーバーが自身を識別するために用いる識別子です。
NEW:
NEW:
The intended audience of the JWT is "https://authz.example.net", which is the authorization server's issuer identifier.
JWTの意図されたオーディエンスは "https://authz.example.net" であり、これは認可サーバーの発行者識別子です。
In the same section, the JWT Claims Set example is replaced as follows.
同じ節にあるJWT Claims Setの例は、次のように置き換えられます。
OLD:
OLD:
{"iss":"https://jwt-idp.example.com",
"sub":"mailto:mike@example.com",
"aud":"https://jwt-rp.example.net",
"nbf":1300815780,
"exp":1300819380,
"http://claims.example.com/member":true}
NEW:
NEW:
{
"iss": "https://jwt-idp.example.com",
"sub": "mailto:mike@example.com",
"aud": "https://authz.example.net",
"iat": 1731721541,
"exp": 1731725141,
"http://claims.example.com/member": true
}
In the list of agreements required by participants in Section 5 of [RFC7523] (Interoperability Considerations), an agreement on "audience identifiers" is no longer needed for client authentication JWTs.
[RFC7523] の第5節 (Interoperability Considerations) にある、参加者に必要とされる合意事項の一覧のうち、"audience identifiers" に関する合意は、クライアント認証JWTについてはもはや不要です。
The additional example in the following subsection is added after Section 4 of [RFC7523].
次の小節にある追加の例が、[RFC7523] の第4節の後に追加されます。
The following example illustrates what a client authentication JWT and token request using it would look like.
次の例は、クライアント認証JWTと、それを用いたトークンリクエストがどのようなものになるかを示しています。
The example shows a JWT issued and signed by the OAuth client identified as "https://client.example". The intended audience of the JWT is "https://authz.example.net", which is the authorization server's issuer identifier. The JWT is sent as part of a token request to the authorization server's token endpoint at "https://authz.example.net/token.oauth2".
この例は、"https://client.example" として識別されるOAuthクライアントによって発行され署名されたJWTを示しています。JWTの意図されたオーディエンスは "https://authz.example.net" であり、これは認可サーバーの発行者識別子です。このJWTは、認可サーバーのトークンエンドポイントである "https://authz.example.net/token.oauth2" へのトークンリクエストの一部として送信されます。
Below is an example JSON object that could be encoded to produce the JWT Claims Set for a client authentication JWT:
以下は、クライアント認証JWTのJWT Claims Setを生成するためにエンコードできるJSONオブジェクトの例です。
{
"iss": "https://client.example",
"sub": "https://client.example",
"aud": "https://authz.example.net",
"iat": 1752702206,
"exp": 1752705806
}
The following example JSON object, used as the header parameters of a JWT, declares that the JWT is a client authentication JWT, is signed with the Elliptic Curve Digital Signature Algorithm (ECDSA) P-256 with SHA-256, and was signed with a key identified by the "kid" value "16".
次のJSONオブジェクトの例は、JWTのヘッダーパラメータとして使用され、そのJWTがクライアント認証JWTであること、SHA-256を用いたElliptic Curve Digital Signature Algorithm (ECDSA) P-256で署名されていること、および "kid" の値 "16" で識別される鍵で署名されたことを宣言しています。
{
"typ": "client-authentication+jwt",
"alg": "ES256",
"kid": "16"
}
To present the JWT with the claims and header parameters shown above as part of an access token request, for example, the client might make the following HTTPS request (with extra line breaks for display purposes only):
たとえば、上に示したクレームとヘッダーパラメータを持つJWTをアクセストークンリクエストの一部として提示するために、クライアントは次のHTTPSリクエストを行うことがあります (改行は表示のためだけに追加しています)。
POST /token.oauth2 HTTP/1.1
Host: authz.example.net
Content-Type: application/x-www-form-urlencoded
grant_type=authorization_code&
code=n0esc3NRze7LTCu7iYzS6a5acc3f0ogp4&
client_assertion_type=urn%3Aietf%3Aparams%3Aoauth%3A
client-assertion-type%3Ajwt-bearer&
client_assertion=eyJ0eXAiOiJjbGllbnQtYXV0aGVudGljYXRpb24rand0IiwiYWx
nIjoiRVMyNTYiLCJraWQiOiIxNiJ9.eyJhdWQiOiJodHRwczovL2F1dGh6LmV4YW1w
bGUubmV0IiwiaXNzIjoiaHR0cHM6Ly9jbGllbnQuZXhhbXBsZSIsInN1YiI6Imh0dH
BzOi8vY2xpZW50LmV4YW1wbGUiLCJpYXQiOjE3NTI3MDIyMDYsImV4cCI6MTc1Mjcw
NTgwNn0.6KrSQUxdl9ehs[...omitted for brevity...]bwc0ZOJw
This section updates "OAuth 2.0 Pushed Authorization Requests" [RFC9126] to tighten its audience requirements.
この節は、"OAuth 2.0 Pushed Authorization Requests" [RFC9126] を更新し、そのオーディエンスの要件を厳格化します。
The last paragraph in Section 2 of [RFC9126] (Pushed Authorization Request Endpoint), which describes the audience value, is replaced as follows.
[RFC9126] の第2節 (Pushed Authorization Request Endpoint) の最後の段落は、オーディエンスの値について述べていますが、次のように置き換えられます。
OLD:
OLD:
Due to historical reasons, there is potential ambiguity regarding the appropriate audience value to use when employing JWT client assertion-based authentication (defined in Section 2.2 of [RFC7523] with private_key_jwt or client_secret_jwt authentication method names per Section 9 of [OpenID.Core]). To address that ambiguity, the issuer identifier URL of the authorization server according to [RFC8414] SHOULD be used as the value of the audience. In order to facilitate interoperability, the authorization server MUST accept its issuer identifier, token endpoint URL, or pushed authorization request endpoint URL as values that identify it as an intended audience.
歴史的な経緯により、JWTクライアントアサーションに基づく認証 ([OpenID.Core] の第9節に従い、認証方式名 private_key_jwt または client_secret_jwt を伴って [RFC7523] の第2.2節で定義されるもの) を用いる際に、適切なオーディエンスの値について曖昧さが生じる可能性があります。この曖昧さに対処するため、[RFC8414] に従う認可サーバーの発行者識別子URLを、オーディエンスの値として使用すべきです (SHOULD)。相互運用性を促進するため、認可サーバーは、自身を意図されたオーディエンスとして識別する値として、その発行者識別子、トークンエンドポイントURL、またはプッシュ認可リクエストエンドポイントURLを受け入れなければなりません (MUST)。
NEW:
NEW:
Due to historical reasons, there is potential ambiguity regarding the appropriate audience value to use when employing JWT client assertion-based authentication (as defined in Section 2.2 of [RFC7523] and as updated by Section 4 with the "private_key_jwt" or "client_secret_jwt" authentication method names per Section 9 of [OpenID.Core]). To address that ambiguity, the issuer identifier URL of the authorization server according to [RFC8414] MUST be used as the sole value of the audience. The authorization server MUST reject any such JWT that does not contain its own issuer identifier as the sole audience value.
歴史的な経緯により、JWTクライアントアサーションに基づく認証 ([OpenID.Core] の第9節に従い、認証方式名 "private_key_jwt" または "client_secret_jwt" を伴って、[RFC7523] の第2.2節で定義され、第4節で更新されるもの) を用いる際に、適切なオーディエンスの値について曖昧さが生じる可能性があります。この曖昧さに対処するため、[RFC8414] に従う認可サーバーの発行者識別子URLを、オーディエンスの唯一の値として使用しなければなりません (MUST)。認可サーバーは、自身の発行者識別子を唯一のオーディエンスの値として含まないそのようなJWTを、拒否しなければなりません (MUST)。
Client authentication JWTs SHOULD be explicitly typed by using the "typ" header parameter value "client-authentication+jwt" or another more specific explicit type value defined by a specification profiling this specification.
クライアント認証JWTは、"typ" ヘッダーパラメータの値として "client-authentication+jwt"、またはこの仕様をプロファイルする仕様で定義される、より具体的な別の明示的な型の値を用いて、明示的に型付けされるべきです (SHOULD)。
The introduction of strong typing for JWTs (using explicit "typ" values) serves as a signal to distinguish between tokens produced in accordance with specifications published prior to these updates and those incorporating them. However, the primary security protection comes from the tightened audience requirements. The use of explicit typing enables clients to signal their compliance with the requirements herein. However, since strong typing alone does not prevent the attacks described in [private_key_jwt.Disclosure] and [Audience.Injection], it is NOT RECOMMENDED for servers to reject JWTs that do not have explicit types. Such rejection would cause interoperability issues with clients that already conform to the tightened audience requirements but have not yet adopted explicit typing. This approach balances security signaling with practical deployment considerations, avoiding disruption to client deployments that already conform to the tightened audience requirements but have not yet adopted explicit typing.
JWTに対する強い型付け (明示的な "typ" 値の使用) の導入は、これらの更新より前に公開された仕様に従って生成されたトークンと、更新を取り入れたトークンとを区別するためのシグナルとして機能します。ただし、主たるセキュリティ上の保護は、厳格化されたオーディエンスの要件によってもたらされます。明示的な型付けを使用することで、クライアントはここでの要件への準拠を示すことができます。しかし、強い型付けだけでは [private_key_jwt.Disclosure] および [Audience.Injection] に記載されている攻撃を防げないため、サーバーが明示的な型を持たないJWTを拒否することは推奨されません (NOT RECOMMENDED)。そのような拒否は、厳格化されたオーディエンスの要件にすでに適合しているものの、まだ明示的な型付けを採用していないクライアントとの相互運用性の問題を引き起こします。このアプローチは、セキュリティ上のシグナリングと実際の展開上の考慮事項とのバランスをとり、厳格化されたオーディエンスの要件にすでに適合しているものの、まだ明示的な型付けを採用していないクライアントの展開に支障が生じることを避けるものです。
Changes in this specification affect interoperability between clients and authorization servers that implement different versions. In particular, the resulting compatibility is not entirely symmetric. A client implementing this specification will interoperate with both authorization servers conforming to the updates herein as well as authorization servers implementing earlier versions. However, some clients implementing earlier versions may not interoperate with authorization servers that strictly enforce the updated requirements in this specification. Deployments upgrading to this specification should consider this asymmetry when planning rollouts or migrations, as it may be necessary to ensure that clients are updated before, or in coordination with, authorization servers that enforce the updated behavior.
この仕様の変更は、異なるバージョンを実装するクライアントと認可サーバーとの間の相互運用性に影響します。特に、結果として得られる互換性は完全に対称ではありません。この仕様を実装するクライアントは、ここでの更新に準拠する認可サーバーとも、以前のバージョンを実装する認可サーバーとも相互運用できます。しかし、以前のバージョンを実装する一部のクライアントは、この仕様の更新された要件を厳格に強制する認可サーバーとは相互運用できない場合があります。この仕様へアップグレードする展開では、ロールアウトや移行を計画する際にこの非対称性を考慮すべきです。更新された動作を強制する認可サーバーより前に、またはそれと連携して、クライアントが更新されていることを確実にする必要がある場合があるためです。
The security considerations described within the following specifications are all applicable to this document: "Assertion Framework for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7521], "Security Assertion Markup Language (SAML) 2.0 Profile for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7522], "JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7523], "OAuth 2.0 Pushed Authorization Requests" [RFC9126], "The OAuth 2.0 Authorization Framework" [RFC6749], and "JSON Web Token (JWT)" [RFC7519].
次の仕様に記載されているセキュリティ上の考慮事項は、すべてこの文書に適用されます。"Assertion Framework for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7521]、"Security Assertion Markup Language (SAML) 2.0 Profile for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7522]、"JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants" [RFC7523]、"OAuth 2.0 Pushed Authorization Requests" [RFC9126]、"The OAuth 2.0 Authorization Framework" [RFC6749]、および "JSON Web Token (JWT)" [RFC7519]。
Type name:
タイプ名:
application
application
Subtype name:
サブタイプ名:
client-authentication+jwt
client-authentication+jwt
Required parameters:
必須パラメーター:
N/A
N/A
Optional parameters:
任意パラメーター:
N/A
N/A
Encoding considerations:
エンコーディングに関する考慮事項:
binary; A client authentication JWT is a JWT; JWT values are encoded as a series of base64url-encoded values (some of which may be the empty string) separated by period ('.') characters.
バイナリです。クライアント認証JWTはJWTであり、JWTの値は、ピリオド ('.') 文字で区切られた一連のbase64urlエンコードされた値(その一部は空文字列の場合があります)としてエンコードされます。
Security considerations:
セキュリティに関する考慮事項:
See Section 7 of RFC 10070
RFC 10070 のセクション7を参照してください
Interoperability considerations:
相互運用性に関する考慮事項:
N/A
N/A
Published specification:
公開されている仕様:
Section 4 of RFC 10070
RFC 10070 のセクション4
Applications that use this media type:
このメディアタイプを使用するアプリケーション:
Applications that use RFC 10070
RFC 10070 を使用するアプリケーション
Fragment identifier considerations:
フラグメント識別子に関する考慮事項:
N/A
N/A
Additional information:
追加情報:
Magic number(s):
マジックナンバー:
N/A
N/A
File extension(s):
ファイル拡張子:
N/A
N/A
Macintosh file type code(s):
Macintoshファイルタイプコード:
N/A
N/A
Person & email address to contact for further information:
追加情報の問い合わせ先の担当者とメールアドレス:
IETF OAuth Working Group <oauth@ietf.org>
IETF OAuth Working Group <oauth@ietf.org>
Intended usage:
想定される用途:
COMMON
COMMON
Restrictions on usage:
使用上の制限:
none
なし
Author:
作成者:
Michael B. Jones <michael_b_jones@hotmail.com>
Michael B. Jones <michael_b_jones@hotmail.com>
Change controller:
変更管理者:
IETF
IETF
Provisional registration?
暫定登録か?
No
いいえ
IANA has updated the following entries in the "OAuth Token Endpoint Authentication Methods" registry of [IANA.OAuthParameters].
IANAは、[IANA.OAuthParameters] の "OAuth Token Endpoint Authentication Methods" レジストリの次のエントリを更新しました。
Token Endpoint Authentication Method Name:
トークンエンドポイント認証方式名:
private_key_jwt
private_key_jwt
Change Controller:
変更管理者:
IESG
IESG
Reference:
参照:
Section 9 of [OpenID.Core], RFC 10070
第9節 of [OpenID.Core], RFC 10070
Token Endpoint Authentication Method Name:
トークンエンドポイント認証方式名:
client_secret_jwt
client_secret_jwt
Change Controller:
変更管理者:
IESG
IESG
Reference:
参照:
Section 9 of [OpenID.Core], RFC 10070
第9節 of [OpenID.Core], RFC 10070
IANA has updated the following entries in the "OAuth URI" registry of [IANA.OAuthParameters] to list RFC 10070 as an additional reference.
IANA は、[IANA.OAuthParameters] の "OAuth URI" レジストリにある次のエントリを更新し、RFC 10070 を追加の参照として記載しました。
* urn:ietf:params:oauth:grant-type:jwt-bearer
* urn:ietf:params:oauth:grant-type:jwt-bearer
* urn:ietf:params:oauth:client-assertion-type:jwt-bearer
* urn:ietf:params:oauth:client-assertion-type:jwt-bearer
* urn:ietf:params:oauth:grant-type:saml2-bearer
* urn:ietf:params:oauth:grant-type:saml2-bearer
* urn:ietf:params:oauth:client-assertion-type:saml2-bearer
* urn:ietf:params:oauth:client-assertion-type:saml2-bearer
[OASIS.saml-core-2.0-os]
Cantor, S., Ed., Kemp, J., Ed., Philpott, R., Ed., and E.
Maler, Ed., "Assertions and Protocols for the OASIS
Security Assertion Markup Language (SAML) V2.0", OASIS
Standard saml-core-2.0-os, March 2005,
<https://docs.oasis-open.org/security/saml/v2.0/saml-core-
2.0-os.pdf>.
[OpenID.Core]
Sakimura, N., Bradley, J., Jones, M.B., de Medeiros, B.,
and C. Mortimore, "OpenID Connect Core 1.0 incorporating
errata set 2", 15 December 2023,
<https://openid.net/specs/openid-connect-core-1_0.html>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfc-editor.org/info/rfc2119>.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, <https://www.rfc-editor.org/info/rfc3986>.
[RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012, <https://www.rfc-editor.org/info/rfc6749>.
[RFC7519] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015, <https://www.rfc-editor.org/info/rfc7519>.
[RFC7521] Campbell, B., Mortimore, C., Jones, M., and Y. Goland, "Assertion Framework for OAuth 2.0 Client Authentication and Authorization Grants", RFC 7521, DOI 10.17487/RFC7521, May 2015, <https://www.rfc-editor.org/info/rfc7521>.
[RFC7522] Campbell, B., Mortimore, C., and M. Jones, "Security Assertion Markup Language (SAML) 2.0 Profile for OAuth 2.0 Client Authentication and Authorization Grants", RFC 7522, DOI 10.17487/RFC7522, May 2015, <https://www.rfc-editor.org/info/rfc7522>.
[RFC7523] Jones, M., Campbell, B., and C. Mortimore, "JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants", RFC 7523, DOI 10.17487/RFC7523, May 2015, <https://www.rfc-editor.org/info/rfc7523>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8414] Jones, M., Sakimura, N., and J. Bradley, "OAuth 2.0 Authorization Server Metadata", RFC 8414, DOI 10.17487/RFC8414, June 2018, <https://www.rfc-editor.org/info/rfc8414>.
[RFC8725] Sheffer, Y., Hardt, D., and M. Jones, "JSON Web Token Best Current Practices", BCP 225, RFC 8725, DOI 10.17487/RFC8725, February 2020, <https://www.rfc-editor.org/info/rfc8725>.
[RFC9126] Lodderstedt, T., Campbell, B., Sakimura, N., Tonge, D., and F. Skokan, "OAuth 2.0 Pushed Authorization Requests", RFC 9126, DOI 10.17487/RFC9126, September 2021, <https://www.rfc-editor.org/info/rfc9126>.
[Audience.Injection]
Hosseyni, P., Küsters, R., and T. Würtele, "Audience
Injection Attacks: A New Class of Attacks on Web-Based
Authorization and Authentication Standards", Cryptology
ePrint Archive, Paper 2025/629, April 2025,
<https://eprint.iacr.org/2025/629>.
[IANA.MediaTypes]
IANA, "Media Types",
<https://www.iana.org/assignments/media-types>.
[IANA.OAuthParameters]
IANA, "OAuth Parameters",
<https://www.iana.org/assignments/oauth-parameters>.
[OpenID.Federation]
Hedberg, R., Ed., Jones, M. B., Solberg, A., Bradley, J.,
Marco, G. D., and V. Dzhuvinov, "OpenID Federation 1.0",
17 February 2026,
<https://openid.net/specs/openid-federation-1_0.html>.
[private_key_jwt.Disclosure]
OpenID Foundation, "OIDF Responsible Disclosure Notice on
Security Vulnerability for private_key_jwt", 24 January
2025, <https://openid.net/wp-content/uploads/2025/01/OIDF-
Responsible-Disclosure-Notice-on-Security-Vulnerability-
for-private_key_jwt.pdf>.
[RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, DOI 10.17487/RFC2046, November 1996, <https://www.rfc-editor.org/info/rfc2046>.
[RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006, <https://www.rfc-editor.org/info/rfc4648>.
[RFC6838] Freed, N., Klensin, J., and T. Hansen, "Media Type Specifications and Registration Procedures", BCP 13, RFC 6838, DOI 10.17487/RFC6838, January 2013, <https://www.rfc-editor.org/info/rfc6838>.
[W3C.REC-html401-19991224]
Ragget, D., Ed., Hors, A., Ed., and I. Jacobs, Ed., "HTML
4.01 Specification", World Wide Web Consortium
Recommendation REC-html401-19991224, December 1999,
<https://www.w3.org/TR/1999/REC-html401-19991224/>.
We would like to acknowledge the contributions of the following people to this specification: Brock Allen, John Bradley, Ralph Bragg, Deb Cooley, Jim Fenton, Mahesh Jethanandani, Joseph Heenan, Pedram Hosseyni, Luigi Iannone, Pieter Kasselman, Jamshid Khosravian, Ralf Küsters, Martin Lindström, Axel Nennker, Aaron Parecki, Rich Salz, Dean H. Saxe, Arndt Schwenkschuster, Rifaat Shekh-Yusef, and Tim Würtele.
本仕様への貢献に対し、次の方々に感謝いたします: Brock Allen, John Bradley, Ralph Bragg, Deb Cooley, Jim Fenton, Mahesh Jethanandani, Joseph Heenan, Pedram Hosseyni, Luigi Iannone, Pieter Kasselman, Jamshid Khosravian, Ralf Küsters, Martin Lindström, Axel Nennker, Aaron Parecki, Rich Salz, Dean H. Saxe, Arndt Schwenkschuster, Rifaat Shekh-Yusef, Tim Würtele。
Michael B. Jones
Self-Issued Consulting
Email: michael_b_jones@hotmail.com
URI: https://self-issued.info/
Brian Campbell
Ping Identity
Email: bcampbell@pingidentity.com
Chuck Mortimore
Ticketmaster
Email: charliemortimore@gmail.com
Filip Skokan
Okta
Email: panva.ip@gmail.com