[要約] RFC 4983は、Fibre Channel Registered State Change Notification (RSCN) MIBに関する標準仕様です。このRFCの目的は、Fibre Channelネットワーク上のデバイスの状態変更を通知するためのMIBオブジェクトを定義することです。

Network Working Group                                         C. DeSanti
Request for Comments: 4983                                    H.K. Vivek
Category: Standards Track                                  K. McCloghrie
                                                           Cisco Systems
                                                                  S. Gai
                                                           Nuova Systems
                                                             August 2007
        

Fibre Channel Registered State Change Notification (RSCN) MIB

ファイバーチャネル登録状態変更通知(RSCN)MIB

Status of This Memo

本文書の位置付け

This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.

このドキュメントは、インターネットコミュニティのインターネット標準トラックプロトコルを指定し、改善のための議論と提案を要求します。このプロトコルの標準化状態とステータスについては、「インターネット公式プロトコル標準」(STD 1)の現在のエディションを参照してください。このメモの配布は無制限です。

Abstract

概要

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to the management of Fibre Channel's Registered State Change Notifications (RSCNs).

このメモは、インターネットコミュニティのネットワーク管理プロトコルで使用するための管理情報ベース(MIB)の一部を定義します。特に、ファイバーチャネルの登録状態変更通知(RSCN)の管理に関連する情報の管理オブジェクトについて説明します。

Table of Contents

目次

   1. Introduction ....................................................3
   2. The Internet-Standard Management Framework ......................3
   3. Short Overview of Fibre Channel .................................3
   4. Relationship to Other MIBs ......................................5
   5. MIB Overview ....................................................5
      5.1. Fibre Channel Management Instance ..........................5
      5.2. Switch Index ...............................................6
      5.3. Fabric Index ...............................................6
      5.4. The t11FcRscnRegistrationGroup Group .......................6
      5.5. The t11FcRscnNotifyGroup Group .............................6
      5.6. The t11FcRscnNotifyControlGroup Group ......................7
      5.7. The t11FcRscnStatsGroup Group ..............................7
   6. Definitions .....................................................8
      6.1. The T11-FC-RSCN-MIB Module .................................8
   7. IANA Considerations ............................................23
   8. Security Considerations ........................................24
   9. Acknowledgements ...............................................25
   10. Normative References ..........................................25
   11. Informative References ........................................26
        
1. Introduction
1. はじめに

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to Registered State Change Notifications (RSCNs) [FC-LS] in a Fibre Channel network, including which Nx_Ports are registered to receive which types of RSCNs, the control and generation of Simple Network Management Protocol (SNMP) notifications on registration failures, and RSCN-related statistics.

このメモは、インターネットコミュニティのネットワーク管理プロトコルで使用するための管理情報ベース(MIB)の一部を定義します。特に、ファイバーチャネルネットワークの登録状態変更通知(RSCNS)[FC-LS]に関連する情報の管理オブジェクトを説明します。(SNMP)登録障害に関する通知、およびRSCN関連統計。

This memo was previously approved by INternational Committee for Information Technology Standards (INCITS) Task Group T11.5 (http://www.t11.org); this document is a product of the IETF's IMSS working group.

このメモは、以前は国際情報技術標準委員会(INCITS)タスクグループT11.5(http://www.t11.org)によって承認されました。このドキュメントは、IETFのIMSSワーキンググループの製品です。

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, RFC 2119 [RFC2119].

「必須」、「そうしない」、「必須」、「shall」、「shall "、" ingle "、" should "、" not "、" becommended "、" bay "、および「optional」は、BCP 14、RFC 2119 [RFC2119]に記載されているように解釈される。

2. The Internet-Standard Management Framework
2. インターネット標準の管理フレームワーク

For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410].

現在のインターネット標準管理フレームワークを説明するドキュメントの詳細な概要については、RFC 3410 [RFC3410]のセクション7を参照してください。

Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580].

管理されたオブジェクトは、管理情報ベースまたはMIBと呼ばれる仮想情報ストアからアクセスされます。MIBオブジェクトは通常、単純なネットワーク管理プロトコル(SNMP)からアクセスされます。MIBのオブジェクトは、管理情報の構造(SMI)で定義されたメカニズムを使用して定義されます。このメモは、STD 58、RFC 2578 [RFC2578]、STD 58、RFC 2579 [RFC2579]およびSTD 58、RFC 2580 [RFC2580]に記載されているSMIV2に準拠したMIBモジュールを指定します。

3. Short Overview of Fibre Channel
3. ファイバーチャネルの簡単な概要

The Fibre Channel (FC) is logically a bidirectional point-to-point serial data channel, structured for high performance. Fibre Channel provides a general transport vehicle for higher level protocols such as Small Computer System Interface (SCSI) command sets, the High-Performance Parallel Interface (HIPPI) data framing, IP (Internet Protocol), IEEE 802.2, and others.

ファイバーチャネル(FC)は、論理的に高性能のために構成された双方向のポイントツーポイントシリアルデータチャネルです。Fiber Channelは、Small Computer System Interface(SCSI)コマンドセット、高性能パラレルインターフェイス(HIPPI)データフレーミング、IP(インターネットプロトコル)、IEEE 802.2など、より高いレベルのプロトコルに一般的な輸送車両を提供します。

Physically, Fibre Channel is an interconnection of multiple communication points, called N_Ports, interconnected either by a switching network, called a Fabric, or by a point-to-point link. A Fibre Channel "node" consists of one or more N_Ports. A Fabric may consist of multiple Interconnect Elements, some of which are switches. An N_Port connects to the Fabric via a port on a switch called an F_Port. When multiple FC nodes are connected to a single port on a switch via an "Arbitrated Loop" topology, the switch port is called an FL_Port, and the nodes' ports are called NL_Ports. The term Nx_Port is used to refer to either an N_Port or an NL_Port. The term Fx_Port is used to refer to either an F_Port or an FL_Port. A switch port, which is interconnected to another switch port via an Inter-Switch Link (ISL), is called an E_Port. A B_Port connects a bridge device with an E_Port on a switch; a B_Port provides a subset of E_Port functionality.

物理的には、ファイバーチャネルは、N_PORTSと呼ばれる複数の通信ポイントの相互接続であり、ファブリックと呼ばれるスイッチングネットワークまたはポイントツーポイントリンクのいずれかによって相互接続されています。ファイバーチャネル「ノード」は、1つ以上のn_portsで構成されています。ファブリックは、複数の相互接続要素で構成される場合があり、その一部はスイッチです。N_PORTは、F_PORTと呼ばれるスイッチ上のポートを介してファブリックに接続します。複数のFCノードが「仲裁ループ」トポロジを介してスイッチ上の単一のポートに接続されている場合、スイッチポートはFL_PORTと呼ばれ、ノードのポートはNL_PORTSと呼ばれます。NX_PORTという用語は、N_PORTまたはNL_PORTのいずれかを参照するために使用されます。FX_PORTという用語は、F_PORTまたはFL_PORTのいずれかを参照するために使用されます。スイッチ間リンク(ISL)を介して別のスイッチポートに相互接続されたスイッチポートは、e_portと呼ばれます。B_PORTは、ブリッジデバイスをスイッチ上のE_PORTで接続します。B_PORTは、E_PORT機能のサブセットを提供します。

Many Fibre Channel components, including the fabric, each node, and most ports, have globally unique names. These globally unique names are typically formatted as World Wide Names (WWNs). More information on WWNs can be found in [FC-FS]. WWNs are expected to be persistent across agent and unit resets.

ファブリック、各ノード、ほとんどのポートなど、多くのファイバーチャネルコンポーネントには、グローバルにユニークな名前があります。これらのグローバルなユニークな名前は、通常、World Wide Names(WWNS)としてフォーマットされます。WWNの詳細については、[FC-FS]をご覧ください。WWNは、エージェントとユニットのリセット全体で永続的であると予想されます。

Fibre Channel frames contain 24-bit address identifiers that identify the frame's source and destination ports. Each FC port has both an address identifier and a WWN. When a fabric is in use, the FC address identifiers are dynamically assigned by a switch. Each octet of a 24-bit address represents a level in an address hierarchy, with a Domain_ID being the highest level of the hierarchy.

ファイバーチャネルフレームには、フレームのソースと宛先ポートを識別する24ビットアドレス識別子が含まれています。各FCポートには、アドレス識別子とWWNの両方があります。ファブリックが使用されている場合、FCアドレス識別子はスイッチによって動的に割り当てられます。24ビットアドレスの各オクテットは、アドレス階層のレベルを表し、domain_idは階層の最高レベルです。

Registered State Change Notifications (RSCNs) are defined in [FC-LS] as a means to provide Nx_Ports that have registered to receive such notifications with a timely indication of changes in the state of nodes attached to the fabric. Specifically, an Nx_Port may choose to register, using a State Change Registration (SCR) request [FC-LS] to receive RSCNs. When an event occurs that may affect a registered Nx_Port's port's state, the registered Nx_Port will receive an RSCN. For example, an Nx_Port can use RSCNs as the means by which it is informed of the failures of other nodes, of new devices coming online, or even of more network-accessible storage becoming available. The payload of the RSCN indicates the type of change and includes the address of the changed port. RSCNs are often generated by the fabric, but an Nx_Port can also generate (and send to the fabric) an RSCN if and when it detects an event not visible to the fabric. The sender of an RSCN may coalesce several events into a single RSCN message. Each RSCN is a "request" that is acknowledged by the receiver with an accept or reject.

登録状態変更通知(RSCN)は、ファブリックに接続されたノードの状態の変更をタイムリーに示し、そのような通知を受け取るために登録したNX_PORTSを提供する手段として[FC-LS]で定義されています。具体的には、NX_PORTは、RSCNを受信するために状態変更登録(SCR)リクエスト[FC-LS]を使用して、登録を選択できます。登録されたNX_PORTのポート状態に影響を与える可能性のあるイベントが発生すると、登録されたNX_PORTにRSCNが届きます。たとえば、NX_PORTは、RSCNを使用して、他のノードの障害、オンラインになっている新しいデバイス、さらにはより多くのネットワークアクセス可能なストレージが利用可能になることを通知する手段として使用できます。RSCNのペイロードは、変更の種類を示し、変更されたポートのアドレスを含みます。RSCNは生地によって生成されることがよくありますが、NX_PORTは、ファブリックに表示されないイベントを検出した場合、RSCNを生成(およびファブリックに送信)することもできます。RSCNの送信者は、いくつかのイベントを単一のRSCNメッセージに合体する場合があります。各RSCNは、受け入れまたは拒否されたレシーバーによって認められる「リクエスト」です。

An RSCN is received by an Nx_Port from the Fabric as an Extended Link Service (ELS) request [FC-LS]. The Fabric distributes RSCNs between Switches using an SW_ILS frame with an Inter-Switch RSCN payload, also known as an SW_RSCN [FC-SW-4]. So, when a Switch has directly attached Nx_Ports that have registered to receive RSCNs, it converts received SW_RSCNs (i.e., SW_ILS frames containing SW_RSCN payloads) into ELS requests containing the corresponding RSCN which it sends to each such Nx_Port.

RSCNは、拡張リンクサービス(ELS)リクエスト[FC-LS]として、ファブリックからNX_PORTによって受信されます。ファブリックは、SW_RSCN [FC-SW-4]としても知られるスイッチ間RSCNペイロードを使用して、SW_ILSフレームを使用してスイッチ間でRSCNを分配します。したがって、RSCNを受信するために登録されたNX_PORTSが直接接続されているスイッチが、受信したSW_RSCNS(つまり、SW_RSCNペイロードを含むSW_ILSフレーム)を、そのようなNX_PORTごとに送信する対応するRSCNを含むELSリクエストに変換します。

The latest standard for an interconnecting Fabric containing multiple Fabric Switch elements is [FC-SW-4]. [FC-SW-4] carries forward the earlier specification for the operation of a single Fabric in a physical infrastructure, and augments it with the definition of Virtual Fabrics and with the specification of how multiple Virtual Fabrics can operate within one (or more) physical infrastructures. The use of Virtual Fabrics provides for each frame to be tagged in its header to indicate which one of several Virtual Fabrics that frame is being transmitted on. All frames entering a particular "Core Switch" [FC-SW-4] (i.e., a physical switch) on the same Virtual Fabric are processed by the same "Virtual Switch" within that Core Switch.

複数のファブリックスイッチ要素を含む相互接続ファブリックの最新標準は[FC-SW-4]です。[FC-SW-4]は、物理インフラストラクチャでの単一のファブリックの動作のための以前の仕様を前進させ、仮想ファブリックの定義と、複数の仮想ファブリックが1つ(またはそれ以上)で動作する方法の仕様でそれを補強します物理インフラストラクチャ。仮想ファブリックを使用すると、各フレームがヘッダーにタグ付けされ、フレームが送信されているいくつかの仮想ファブリックの1つを示すことができます。特定の「コアスイッチ」[FC-SW-4](つまり、物理スイッチ)に入力するすべてのフレームは、同じ仮想ファブリックの上にあるコアスイッチ内の同じ「仮想スイッチ」によって処理されます。

4. Relationship to Other MIBs
4. 他のMIBとの関係

The first standardized MIB for Fibre Channel [RFC2837] was focused on Fibre Channel switches. It was replaced by the more generic Fibre Channel Management MIB [RFC4044] which defines basic information for Fibre Channel hosts and switches, including extensions to the standard [IF-MIB] for Fibre Channel interfaces. [RFC4044] includes the specification of how the generic objects defined in [IF-MIB] apply to Fibre Channel interfaces.

ファイバーチャネルの最初の標準化されたMIB [RFC2837]は、ファイバーチャネルスイッチに焦点を当てていました。ファイバーチャネルインターフェイスの標準[IF-MIB]への拡張を含む、ファイバーチャネルホストとスイッチの基本情報を定義する、より一般的なファイバーチャネル管理MIB [RFC4044]に置き換えられました。[RFC4044]には、[IF-MIB]で定義された一般的なオブジェクトがファイバーチャネルインターフェイスに適用される方法の仕様が含まれています。

This MIB imports some common Textual Conventions defined in the T11-TC-MIB [RFC4439] and in the T11-FC-NAME-SERVER-MIB [RFC4438].

5. MIB Overview
5. MIBの概要

This section explains the use of a Fibre Channel management instance, a Switch Index, and a Fabric Index. It also describes the four MIB groups contained in the MIB.

このセクションでは、ファイバーチャネル管理インスタンス、スイッチインデックス、ファブリックインデックスの使用について説明します。また、MIBに含まれる4つのMIBグループについても説明しています。

5.1. Fibre Channel Management Instance
5.1. ファイバーチャネル管理インスタンス

A Fibre Channel management instance is defined in [RFC4044] as a separable managed instance of Fibre Channel functionality. Fibre Channel functionality may be grouped into Fibre Channel management instances in whatever way is most convenient for the implementation(s). For example, one such grouping accommodates a single SNMP agent having multiple AgentX [RFC2741] sub-agents, with each sub-agent implementing a different Fibre Channel management instance.

ファイバーチャネル管理インスタンスは、[RFC4044]でファイバーチャネル機能の分離可能なマネージャーインスタンスとして定義されています。ファイバーチャネルの機能は、実装に最も便利な方法で、ファイバーチャネル管理インスタンスにグループ化できます。たとえば、そのようなグループは、複数のAgentX [RFC2741]サブエージェントを備えた単一のSNMPエージェントに対応し、各サブエージェントは異なるファイバーチャネル管理インスタンスを実装しています。

The object, fcmInstanceIndex, is IMPORTed from the FC-MGMT-MIB [RFC4044] as the index value to uniquely identify each Fibre Channel management instance, for example, within the same SNMP context ([RFC3411], section 3.3.1).

オブジェクトFcminstanceIndexは、たとえば同じSNMPコンテキスト([RFC3411]、セクション3.3.1)内で、各ファイバーチャネル管理インスタンスを一意に識別するインデックス値としてFC-MGMT-MIB [RFC4044]からインポートされます。

5.2. Switch Index
5.2. スイッチインデックス

The FC-MGMT-MIB [RFC4044] defines the fcmSwitchTable as a table of information about Fibre Channel switches which are managed by Fibre Channel management instances. Each Fibre Channel management instance can manage one or more Fibre Channel switches. The Switch Index, fcmSwitchIndex, is IMPORTed from the FC-MGMT-MIB as the index value to uniquely identify a Fibre Channel switch amongst those (one or more) managed by the same Fibre Channel management instance.

FC-MGMT-MIB [RFC4044]は、FCMSwitchTableをファイバーチャネル管理インスタンスによって管理されるファイバーチャネルスイッチに関する情報の表として定義します。各ファイバーチャネル管理インスタンスは、1つ以上のファイバーチャネルスイッチを管理できます。スイッチインデックスFCMSWITCHINDEXは、FC-MGMT-MIBからインデックス値としてインポートされ、同じファイバーチャネル管理インスタンスによって管理されている(1つ以上)ファイバーチャネルスイッチを一意に識別します。

5.3. Fabric Index
5.3. ファブリックインデックス

Whether operating on a Physical Fabric (i.e., without Virtual Fabrics) or within a Virtual Fabric, the manner of operation of RSCNs within a/each Fabric is identical. Therefore, this MIB defines all Fabric-related information in tables that are INDEXed by an arbitrary integer, named a "Fabric Index", the syntax of which is IMPORTed from the T11-TC-MIB [RFC4439]. When a device is connected to a single Physical Fabric, without use of any Virtual Fabrics, the value of this Fabric Index will always be 1. In an environment of multiple Virtual and/or Physical Fabrics, this index provides a means to distinguish one Fabric from another.

物理的なファブリック(つまり、仮想生地なし)で動作する場合でも、仮想生地内でも、A/各ファブリック内のRSCNの動作方法は同一です。したがって、このMIBは、「ファブリックインデックス」という名前の任意の整数によってインデックス付けされたテーブルのすべてのファブリック関連情報を定義します。その構文は、T11-TC-MIB [RFC4439]からインポートされます。デバイスが仮想ファブリックを使用せずに単一の物理ファブリックに接続されている場合、このファブリックインデックスの価値は常に1になります。別の人から。

It is quite possible, and may even be likely, that a Fibre Channel switch will have ports connected to multiple Virtual and/or Physical Fabrics. Thus, in order to simplify a management protocol query concerning all the Fabrics to which a single switch is connected, fcmSwitchIndex will be listed before t11FcRscnFabricIndex when they both appear in the same INDEX clause.

ファイバーチャネルスイッチには、複数の仮想ファブリックおよび/または物理ファブリックに接続されたポートがあることは非常に可能です。したがって、単一のスイッチが接続されているすべてのファブリックに関する管理プロトコルクエリを簡素化するために、FCMSWITCHINDEXが同じインデックス句に表示されるT11FCRSCNFABRICINDEXの前にリストされます。

5.4. The t11FcRscnRegistrationGroup Group
5.4. T11FCRSCNREGISTRATIONGROUPグループ

This group contains information about the Nx_Ports which have registered to receive RSCNs.

このグループには、RSCNを受信するために登録したNX_PORTSに関する情報が含まれています。

5.5. The t11FcRscnNotifyGroup Group
5.5. T11FCRSCNNOTIFYGROUPグループ

This group contains two notifications: one generated when a switch rejects an SCR or RSCN; the other when a switch rejects an SW_RSCN.

このグループには、2つの通知が含まれています。1つは、スイッチがSCRまたはRSCNを拒否したときに生成されます。もう1つは、スイッチがSW_RSCNを拒否したとき。

5.5.1. Flow-Control for Notifications
5.5.1. 通知のためのフロー制御

When defining SNMP notifications for events that occur in the data-plane, the maximum frequency of their generation needs to be considered. Unless there is some limiting factor, such notifications need to be flow-controlled in some way, e.g., defined such that after some maximum number within a specified time interval have occurred, further notifications are suppressed for some subsequent time interval. However, when such a suppression occurs, the Network Management System (NMS) that didn't receive the notifications (because they were suppressed) needs to be able to obtain an indication of how many were suppressed. Therefore, an additional Counter32 object needs to be defined, and/or a new type of notification needs to be defined for use at the end of the interval. While this is extra complexity, it is necessary for notifications that need to be flow-controlled.

データプレーンで発生するイベントのSNMP通知を定義する場合、それらの生成の最大頻度を考慮する必要があります。何らかの制限要因がない限り、そのような通知は何らかの方法でフロー制御する必要があります。たとえば、指定された時間間隔内で何らかの最大数が発生した後、その後の時間間隔でさらなる通知が抑制されるように定義されます。ただし、そのような抑制が発生した場合、通知を受け取らなかったネットワーク管理システム(NMS)(抑制されたため)は、抑制された数の指標を得ることができる必要があります。したがって、追加のCounter32オブジェクトを定義する必要があり、および/または間隔の最後に使用するために新しいタイプの通知を定義する必要があります。これは非常に複雑ですが、フロー制御する必要がある通知には必要です。

In contrast, for notifications such as both the ones defined in this MIB module, which are generated due to control-plane events (and are not able to start a chain reaction), the extra complexity of flow-controlling these types of notifications is not warranted.

対照的に、コントロールプレーンイベントのために生成される(そして連鎖反応を開始することができない)このMIBモジュールで定義されている両方の通知の場合、これらのタイプの通知を流すフロー制御の余分な複雑さはそうではありません保証。

5.6. The t11FcRscnNotifyControlGroup Group
5.6. T11FCRSCNOTIFYCONTROLGROUPグループ

This group contains one object for each notification in the t11FcRscnNotifyGroup group to enable/disable that notification, as well as three objects that record information about the latest rejection of an SCR, RSCN or SW_RSCN. Specifically, they record the content (if available) of the rejected request, the source of the rejected request, and the reason for the rejection.

このグループには、t11fcrscnnotifygroupグループの各通知の1つのオブジェクトが含まれており、その通知を有効/無効にし、SCR、RSCN、またはSW_RSCNの最新の拒否に関する情報を記録する3つのオブジェクトを有効にします。具体的には、拒否された要求のコンテンツ(利用可能な場合)、拒否された要求のソース、および拒否の理由を記録します。

5.7. The t11FcRscnStatsGroup Group
5.7. T11FCRSCNSTATSGROUPグループ

This group contains RSCN-related statistics. Two levels of statistics are included:

このグループには、RSCN関連の統計が含まれています。2つのレベルの統計が含まれています。

1) counters at the message-type level, for: - the number of SCRs received/rejected, - the number of RSCNs sent/received/rejected, - the number of SW_RSCNs sent/received/rejected.

1) メッセージタイプレベルでのカウンター: - 受信/拒否されたSCRの数 - 送信/受信/拒否されたRSCNの数 - 送信/受信/拒否されたSW_RSCNの数。

2) counters for each different category of sent/received RSCNs, where different categories are indicated by different values of the 'Event Qualifier' contained in an RSCN message. Note that if and when several RSCN events are coalesced into a single RSCN message, then that message may be counted in more than one of these counters. No counters are defined in this MIB for the 'Event Qualifier' value of '0001'b (meaning "Changed Name Server Object") because these types of RSCNs are counted by the t11NsInRscns and t11NsOutRscns objects already defined in [RFC4438].

2) RSCNメッセージに含まれる「イベント予選」の異なる値によって異なるカテゴリが示される、送信/受信RSCNの異なるカテゴリごとのカウンター。いくつかのRSCNイベントが単一のRSCNメッセージに合体されている場合、そのメッセージはこれらのカウンターの複数よりもカウントされる可能性があることに注意してください。これらのタイプのRSCNは[RFC4438]ですでに定義されているT11NSINRSCNSおよびT11NSOUTRSCNSオブジェクトによってカウントされるため、「イベント予選」値「 '0001」の「イベント予選」値(「名前の変更サーバーオブジェクト」を意味する)のカウンターは定義されていません。

6. Definitions
6. 定義
6.1. The T11-FC-RSCN-MIB Module
6.1.
T11-FC-RSCN-MIB DEFINITIONS ::= BEGIN
        
-- The Fibre Channel RSCN MIB
--
-- for the monitoring of registrations by Nx_Ports to receive
-- Registered State Change Notifications (RSCNs), and the
-- monitoring of RSCN usage.
--
        
IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    NOTIFICATION-TYPE,
    Counter32, mib-2                     FROM SNMPv2-SMI   -- [RFC2578]
    MODULE-COMPLIANCE, OBJECT-GROUP,
    NOTIFICATION-GROUP                   FROM SNMPv2-CONF  -- [RFC2580]
    TruthValue                           FROM SNMPv2-TC    -- [RFC2579]
    fcmInstanceIndex, fcmSwitchIndex,
    FcNameIdOrZero, FcAddressIdOrZero    FROM FC-MGMT-MIB  -- [RFC4044]
    T11NsGs4RejectReasonCode   FROM T11-FC-NAME-SERVER-MIB -- [RFC4438]
    T11FabricIndex                       FROM T11-TC-MIB;  -- [RFC4439]
        

t11FcRscnMIB MODULE-IDENTITY LAST-UPDATED "200701080000Z" ORGANIZATION "For the initial versions, T11. For later versions, the IETF's IMSS Working Group." CONTACT-INFO " Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: cds@cisco.com

T11FCRSCNMIBモジュール同一性は、最初のバージョンであるT11の「200701080000Z」組織「組織」を最後に更新しました。後のバージョンでは、IETFのIMSSワーキンググループ。」Contact-INFO "Claudio Desanti Cisco Systems、Inc。170 West Tasman Drive San Jose、CA 95134 USAメール:cds@cisco.com

Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA EMail: kzm@cisco.com"

Keith McCloghrie Cisco Systems、Inc。170 West Tasman Drive San Jose、CA 95134 USAメール:kzm@cisco.com "

DESCRIPTION "The MIB module for the management of registrations by Nx_Ports to receive RSCNs (Registered State Change Notifications) on a Fibre Channel Fabric, as defined in FC-LS, and for the monitoring of RSCNs sent/received or rejected in a Fibre Channel Fabric.

説明 "FC-LSで定義されているように、ファイバーチャネルファブリックでRSCN(登録状態変更通知)を受信し、ファイバーチャネルファブリックで送信/受信または拒否されたRSCNの監視のためのNX_PORTSによる登録の管理のためのMIBモジュール。

           Copyright (C) The Internet Society (2007).  This version of
           this MIB module is part of RFC 4983;  see the RFC itself for
           full legal notices."
    REVISION    "200701080000Z"
    DESCRIPTION
           "Initial version of this MIB module, published as RFC 4983."
    ::= { mib-2 161 }
        
t11FcRscnNotifications  OBJECT IDENTIFIER ::= { t11FcRscnMIB 0 }
t11FcRscnObjects        OBJECT IDENTIFIER ::= { t11FcRscnMIB 1 }
t11FcRscnConformance    OBJECT IDENTIFIER ::= { t11FcRscnMIB 2 }
t11FcRscnRegistrations  OBJECT IDENTIFIER ::= { t11FcRscnObjects 1 }
t11FcRscnStats          OBJECT IDENTIFIER ::= { t11FcRscnObjects 2 }
t11FcRscnInformation    OBJECT IDENTIFIER ::= { t11FcRscnObjects 3 }
        

-- State Change Registration Table

- 状態変更登録表

t11FcRscnRegTable  OBJECT-TYPE
    SYNTAX         SEQUENCE OF T11FcRscnRegEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
           "A table of Nx_Ports that have registered to receive
           RSCNs on all Fabrics configured on one or more Fibre
           Channel switches."
    ::= { t11FcRscnRegistrations 1 }
        
t11FcRscnRegEntry  OBJECT-TYPE
    SYNTAX        T11FcRscnRegEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
           "An entry containing information about one Nx_Port that
           has registered with a particular switch (identified by
           values of fcmInstanceIndex and fcmSwitchIndex) for a
           particular Fabric (identified by a t11FcRscnFabricIndex
           value)."
    INDEX   { fcmInstanceIndex, fcmSwitchIndex, t11FcRscnFabricIndex,
              t11FcRscnRegFcId }
    ::= { t11FcRscnRegTable 1 }
        
T11FcRscnRegEntry ::= SEQUENCE {
        
    t11FcRscnFabricIndex         T11FabricIndex,
    t11FcRscnRegFcId             FcAddressIdOrZero,
    t11FcRscnRegType             BITS
}
        

t11FcRscnFabricIndex OBJECT-TYPE SYNTAX T11FabricIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies a particular Fabric.

t11fcrscnfabricindex object-type syntax t11fabricindex max-accessアクセス不可能なステータス現在の説明 "特定のファブリックを一意に識別するインデックス値。

In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics can operate within one (or more) physical infrastructures. In such a case, this index value is used to uniquely identify a particular Fabric within a physical infrastructure.

FC-SW-4に適合したファブリックでは、複数の仮想ファブリックが1つ(またはそれ以上)の物理インフラストラクチャ内で動作します。このような場合、このインデックス値は、物理インフラストラクチャ内の特定のファブリックを一意に識別するために使用されます。

           In a Fabric that has (or can have) only a single Fabric
           operating within the physical infrastructure, the
           value of this Fabric Index will always be 1."
    REFERENCE
          "ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4
          (FC-SW-4), December 2006."
    ::= { t11FcRscnRegEntry 1 }
        
t11FcRscnRegFcId  OBJECT-TYPE
    SYNTAX        FcAddressIdOrZero (SIZE (3))
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
           "The Fibre Channel Address Identifier of the
           registering Nx_Port."
    ::= { t11FcRscnRegEntry 2 }
        
t11FcRscnRegType  OBJECT-TYPE
    SYNTAX        BITS {
                      fromFabricController(0),
                      fromNxPort(1)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
           "This object indicates the type of registration
           desired by the registering Nx_Port, one bit per type:
        

'fromFabricController' -- RSCNs generated for events

「FromFabricController」 - イベント用に生成されたRSCN

detected by the Fabric Controller.

ファブリックコントローラーによって検出されます。

           'fromNxPorts'          -- RSCNs generated for events
                                  detected by the affected Nx_Port."
    REFERENCE
          "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 40."
    ::= { t11FcRscnRegEntry 3 }
        

-- Statistics

- 統計

t11FcRscnStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF T11FcRscnStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RSCN-related statistics on all Fabrics configured on one or more Fibre Channel switches.

T11FCRSCNSTATSTABLEオブジェクトタイプタイプの構文シーケンスT11FCRSCNSTATSENTRY MAX-ACCESS NOT-ACCESSABLEステータス現在の説明 "1つ以上のファイバーチャネルスイッチで構成されたすべてのファブリックのRSCN関連統計。

Two levels of statistics are included:

2つのレベルの統計が含まれています。

1) counters at the message-type level, for: - the number of SCRs received/rejected, - the number of RSCNs sent/received/rejected, - the number of SW_RSCNs sent/received/rejected.

1) メッセージタイプレベルでのカウンター: - 受信/拒否されたSCRの数 - 送信/受信/拒否されたRSCNの数 - 送信/受信/拒否されたSW_RSCNの数。

              2) counters of sent/received RSCNs per 'Event
                 Qualifier' value.  Note that if and when several
                 RSCN events are coalesced into a single RSCN
                 message, then that message may be counted in
                 more than one of these counters."
    ::= { t11FcRscnStats 1 }
        
t11FcRscnStatsEntry  OBJECT-TYPE
    SYNTAX        T11FcRscnStatsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
           "An entry containing statistics for a particular Fabric
           (identified by a t11FcRscnFabricIndex value) on a particular
           switch (identified by values of fcmInstanceIndex and
           fcmSwitchIndex)."
    INDEX  { fcmInstanceIndex, fcmSwitchIndex, t11FcRscnFabricIndex }
    ::= { t11FcRscnStatsTable 1 }
        
T11FcRscnStatsEntry ::= SEQUENCE {
    t11FcRscnInScrs                    Counter32,
    t11FcRscnInRscns                   Counter32,
    t11FcRscnOutRscns                  Counter32,
    t11FcRscnInSwRscns                 Counter32,
    t11FcRscnOutSwRscns                Counter32,
    t11FcRscnScrRejects                Counter32,
    t11FcRscnRscnRejects               Counter32,
    t11FcRscnSwRscnRejects             Counter32,
    t11FcRscnInUnspecifiedRscns        Counter32,
    t11FcRscnOutUnspecifiedRscns       Counter32,
    t11FcRscnInChangedAttribRscns      Counter32,
    t11FcRscnOutChangedAttribRscns     Counter32,
    t11FcRscnInChangedServiceRscns     Counter32,
    t11FcRscnOutChangedServiceRscns    Counter32,
    t11FcRscnInChangedSwitchRscns      Counter32,
    t11FcRscnOutChangedSwitchRscns     Counter32,
    t11FcRscnInRemovedRscns            Counter32,
    t11FcRscnOutRemovedRscns           Counter32
}
        

t11FcRscnInScrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SCRs received from Nx_Ports by this switch on this Fabric.

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    ::= { t11FcRscnStatsEntry 1 }
        

t11FcRscnInRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RSCNs received from Nx_Ports by this switch on this Fabric.

T11FCRSCNINRSCNSオブジェクトタイプ構文COUNTER32 MAX-ACCESS READ-ONLYステータス現在

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    ::= { t11FcRscnStatsEntry 2 }
        

t11FcRscnOutRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RSCNs transmitted to Nx_Ports by this switch on this Fabric.

T11FCRSCNOUTRSCNSオブジェクトタイプの構文COUNTER32 MAX-ACCESS READ-ACCESS READ-ONLYステータス現在

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    ::= { t11FcRscnStatsEntry 3 }
        

t11FcRscnInSwRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SW_RSCNs received by this switch from other switches on this Fabric.

T11FCRSCNINSWRSCNSオブジェクトタイプ構文COUNTER32 MAX-ACCESS READ-ACCESS READ-ONLYステータス現在の説明 "この生地の他のスイッチからこのスイッチで受信したSW_RSCNの数。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    ::= { t11FcRscnStatsEntry 4 }
        

t11FcRscnOutSwRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SW_RSCNs transmitted by this switch from other switches on this Fabric.

T11FCRSCNOUTSWRSCNSオブジェクトタイプ構文COUNTER32 MAX-ACCESS READ-ONLYステータス現在の説明 "この生地の他のスイッチからこのスイッチから送信されるSW_RSCNの数。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    ::= { t11FcRscnStatsEntry 5 }
        

t11FcRscnScrRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SCRs rejected by this switch on this Fabric.

T11FCRSCNSCRREJECTS Object-Type Syntax Counter32 Max-Access読み取り専用ステータス現在の説明 "この生地のこのスイッチによって拒否されたSCRの数。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    ::= { t11FcRscnStatsEntry 6 }
        

t11FcRscnRscnRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RSCNs rejected by this switch on this Fabric.

t11fcrscnrscnRejects object-type syntax counter32 max-access読み取り専用ステータス現在の説明 "この生地のこのスイッチによって拒否されたRSCNの数。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    ::= { t11FcRscnStatsEntry 7 }
        

t11FcRscnSwRscnRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of SW_RSCN rejected by this switch on this Fabric.

T11FCRSCNSWRSCNREJECTSオブジェクトタイプの構文COUNTY32 MAX-ACCESS READ-ONLYステータス現在の説明 "この生地のこのスイッチによって拒否されたSW_RSCNの数。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    ::= { t11FcRscnStatsEntry 8 }
        

t11FcRscnInUnspecifiedRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registered State Change Notifications (RSCNs) received by this switch on this Fabric which contained an RSCN Event Qualifier value of '0000'b meaning 'Event is not specified'.

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    REFERENCE
           "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 36."
    ::= { t11FcRscnStatsEntry 9 }
        

t11FcRscnOutUnspecifiedRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registered State Change Notifications (RSCNs) sent by this switch on this Fabric which contained an RSCN Event Qualifier value of '0000'b meaning 'Event is not specified'.

t11fcrscnoutunspecifiedrscns object-type syntax counter32 max-access読み取り専用ステータス現在指定'。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    REFERENCE
           "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 36."
    ::= { t11FcRscnStatsEntry 10 }
        

t11FcRscnInChangedAttribRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registered State Change Notifications (RSCNs) received by this switch on this Fabric which contained an RSCN Event Qualifier value of '0002'b meaning 'Changed Port Attribute'.

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    REFERENCE
           "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 36."
    ::= { t11FcRscnStatsEntry 11 }
        

t11FcRscnOutChangedAttribRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registered State Change Notifications (RSCNs) sent by this switch on this Fabric which contained an RSCN Event Qualifier value of '0002'b meaning 'Changed Port Attribute'.

T11FCRSCNOUTCHANGEDATTRIBRSCNSオブジェクトタイプの構文COUNTER32 MAX-ACCESS READ-ACCESS READ-ACCESS CURRET現在の説明 "登録状態変更通知の数(RSCN)'。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    REFERENCE
           "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 36."
    ::= { t11FcRscnStatsEntry 12 }
        

t11FcRscnInChangedServiceRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registered State Change Notifications (RSCNs) received by this switch on this Fabric which contained an RSCN Event Qualifier value of '0003'b meaning 'Changed Service Object'.

T11FCRSCNINCHANGEDSERVICERSCNSオブジェクトタイプの構文カウンター32 MAX-ACCESS読み取り専用ステータス現在の説明'。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    REFERENCE
           "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 36."
    ::= { t11FcRscnStatsEntry 13 }
        

t11FcRscnOutChangedServiceRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registered State Change Notifications (RSCNs) sent by this switch on this Fabric which contained an RSCN Event Qualifier value of '0003'b meaning 'Changed Service Object'.

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    REFERENCE
           "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 36."
    ::= { t11FcRscnStatsEntry 14 }
        

t11FcRscnInChangedSwitchRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registered State Change Notifications (RSCNs) received by this switch on this Fabric which contained an RSCN Event Qualifier value of '0004'b meaning 'Changed Switch Configuration'.

T11FCRSCNINCHANGEDSWITCHRSCNSオブジェクトタイプの構文COUNTER32 MAX-ACCESS READ-ACCESS READ-ACCESS CURRENT現在の説明 "登録状態変更通知の数(RSCN)'。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    REFERENCE
           "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 36."
    ::= { t11FcRscnStatsEntry 15 }
        

t11FcRscnOutChangedSwitchRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registered State Change Notifications (RSCNs) sent by this switch on this Fabric which contained an RSCN Event Qualifier value of '0004'b meaning 'Changed Switch Configuration'.

T11FCRSCNOUTCHANGEDSWITCHRSCNSオブジェクトタイプの構文COUNTER32 MAX-ACCESS READ-ACCESS READ-ACCESS CURRET現在の説明 "このスイッチで送信された登録状態変更通知の数(RSCN)。'。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    REFERENCE
           "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 36."
    ::= { t11FcRscnStatsEntry 16 }
        

t11FcRscnInRemovedRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registered State Change Notifications (RSCNs) received by this switch on this Fabric which contained an RSCN Event Qualifier value of '0005'b meaning 'Removed Object'.

T11FCRSCNINREMOVEDRSCNSオブジェクトタイプ構文Counter32 Max-Access読み取り専用ステータス現在の説明。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    REFERENCE
           "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 36."
    ::= { t11FcRscnStatsEntry 17 }
        

t11FcRscnOutRemovedRscns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Registered State Change Notifications (RSCNs) sent by this switch on this Fabric which contained an RSCN Event Qualifier value of '0005'b meaning 'Removed Object'.

T11FCRSCNOUTREMOVEDRSCNSオブジェクトタイプ構文Counter32 Max-Access読み取り専用ステータス現在の説明 "登録状態変更通知の数(RSCN)。

           This counter has no discontinuities other than
           those that all Counter32s have when sysUpTime=0."
    REFERENCE
           "ANSI INCITS 433-2007, Fibre Channel - Link Services
          (FC-LS), July 2007, Table 36."
    ::= { t11FcRscnStatsEntry 18 }
        
--
-- Notification Control Table
--
t11FcRscnNotifyControlTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF T11FcRscnNotifyControlEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
           "A table of control information for notifications
           generated due to the rejection of an SCR or RSCN."
    ::= { t11FcRscnInformation 1 }
        
t11FcRscnNotifyControlEntry OBJECT-TYPE
    SYNTAX       T11FcRscnNotifyControlEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
           "Each entry contains notification control information
           concerning the rejection of RSCN/SCRs for a particular
           Fabric (identified by the value of t11FcRscnFabricIndex)
           by a particular switch (identified by values of
           fcmInstanceIndex and fcmSwitchIndex)."
    INDEX  { fcmInstanceIndex, fcmSwitchIndex, t11FcRscnFabricIndex }
    ::= { t11FcRscnNotifyControlTable 1 }
        
T11FcRscnNotifyControlEntry ::= SEQUENCE {
     t11FcRscnIlsRejectNotifyEnable     TruthValue,
     t11FcRscnElsRejectNotifyEnable     TruthValue,
     t11FcRscnRejectedRequestString     OCTET STRING,
     t11FcRscnRejectedRequestSource     FcNameIdOrZero,
     t11FcRscnRejectReasonCode          T11NsGs4RejectReasonCode,
     t11FcRscnRejectReasonCodeExp       OCTET STRING,
     t11FcRscnRejectReasonVendorCode    OCTET STRING
}
        

t11FcRscnIlsRejectNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if a t11FcRscnIlsRejectReqNotify notification should be generated when this switch rejects an SW_RSCN on this Fabric.

t11fcrscnilsRejectNotifyEnable object-type struthvalue max-access read-write status current current current "このオブジェクトは、このスイッチがこのファブリックのsw_rscnを拒否したときにt11fcrscnilsrejtreqnotify通知を生成する必要があるかどうかを指定します。

           Values written to this object should be retained
           over agent reboots."
    DEFVAL { false }
    ::= { t11FcRscnNotifyControlEntry 1 }
        

t11FcRscnElsRejectNotifyEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if a t11FcRscnElsRejectReqNotify notification should be generated when this switch rejects an RSCN or SCR on this Fabric.

t11fcrscnelsRejectNotifyEnableオブジェクトタイプの構文ruthvalue max-access read-write status current current current "このオブジェクトは、このスイッチがこのファブリックのRSCNまたはSCRを拒否したときにT11FCRSCNELSRECREQNOTIFY通知を生成する必要があるかどうかを指定します。

           Values written to this object should be retained
           over agent reboots."
    DEFVAL { false }
    ::= { t11FcRscnNotifyControlEntry 2 }
        

t11FcRscnRejectedRequestString OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The binary content of the RSCN, SCR, or SW_RSCN that was most recently rejected by this switch on this Fabric. The value is formatted as an octet string (in network byte order) as described in the relevant Fibre Channel standard, containing the payload (which is typically a list of affected ports and error codes) of the rejected RSCN or SCR as described in FC-LS, or the rejected SW_RSCN as described in FC-SW-4.

T11FCRSCNREJECTEDREFQUESTSTRINGオブジェクトタイプの構文オクタックスストリング(サイズ(0..255))最大読み取り専用ステータス現在の説明 "このファブリックのこのスイッチによって最近拒否されたRSCN、SCR、またはSW_RSCNのバイナリコンテンツ。値は、FC-LSで説明されている拒否されたRSCNまたはSCRのペイロード(通常は影響を受けるポートおよびエラーコードのリスト)を含む、関連するファイバーチャネル標準で説明されているように、オクテット文字列(ネットワークバイト順)としてフォーマットされます。、またはFC-SW-4に記載されているように、拒否されたSW_RSCN。

This object contains the zero-length string if and when the RSCN/SCR/SW_RSCN payload is unavailable. When the length of this object is 255 octets, it contains the first 255 octets of the payload (in network byte order)." REFERENCE "ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Tables 34 & 39.

このオブジェクトには、RSCN/SCR/SW_RSCNペイロードが利用できない場合、ゼロ長さの文字列が含まれています。このオブジェクトの長さが255オクテットの場合、ペイロードの最初の255オクテット(ネットワークバイトの順序)が含まれています。 "参照" ANSIは433-2007、ファイバーチャネル - リンクサービス(FC-LS)、2007年7月、テーブルを挿入します。34&39。

           ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4
           (FC-SW-4), December 2006, Table 45."
    ::= { t11FcRscnNotifyControlEntry 3 }
        

t11FcRscnRejectedRequestSource OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The WWN that was the source of the RSCN, SCR, or SW_RSCN that was most recently rejected by this switch on this Fabric."

T11FCRSCNREJECTEDREFQUESTSOURCEオブジェクトタイプの構文FCNAMEIDORZERO MAX-ACCESS READ-ACCESS READ-ACCESS CURRENT CURRENT CURRET説明「この生地のこのスイッチによって最近拒否されたRSCN、SCR、またはSW_RSCNのソースであったWWN」

    ::= { t11FcRscnNotifyControlEntry 4 }
        

t11FcRscnRejectReasonCode OBJECT-TYPE SYNTAX T11NsGs4RejectReasonCode MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the Reason Code of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric." REFERENCE "ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 146.

T11FCRSCNREJECTREASONCODE OBJECT-TYPE SYNTAX T11NSGS4REJECTREASONCODE MAX-ACCESS READ-ACCESS READ-ACCESS CURRET CURRET説明 "このオブジェクトには、このファブリックのRSCN、SCR、またはSW_RSCNのこのスイッチによる最新の拒絶コードの理由が含まれています。」リファレンス「ANSIは433-2007、ファイバーチャネル - リンクサービス(FC-LS)、2007年7月、表146。

           ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4
           (FC-SW-4), December 2006, Table 5."
    ::= { t11FcRscnNotifyControlEntry 5 }
        

t11FcRscnRejectReasonCodeExp OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the Reason Code Explanation of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric." REFERENCE "ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 147.

T11FCRSCNREJECTREASONCODEEXPオブジェクトタイプの構文オクタックスストリング(サイズ(1))最大アクセスの読み取り専用ステータス現在の説明 "このオブジェクトには、このファブリックのRSCN、SCR、またはSW_RSCNのこのスイッチによる最新の拒否の理由コード説明が含まれています。」参照「ANSIは433-2007、ファイバーチャネル - リンクサービス(FC-LS)、2007年7月、表147。

           ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4
           (FC-SW-4), December 2006, Table 6."
    ::= { t11FcRscnNotifyControlEntry 6 }
        

t11FcRscnRejectReasonVendorCode OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the Reason Vendor Specific Code of the most recent rejection by this switch of an RSCN, SCR or SW_RSCN on this Fabric." REFERENCE "ANSI INCITS 433-2007, Fibre Channel - Link Services (FC-LS), July 2007, Table 148.

t11fcrscnrejectreasonvendorcodeオブジェクトタイプの構文octet string(size(1))max-access読み取り専用ステータス現在の説明 "このオブジェクトには、このファブリックのRSCN、SCR、またはSW_RSCNのこのスイッチによる最新の拒絶の理由ベンダー固有のコードが含まれています。「リファレンス「ANSIは433-2007、ファイバーチャネル - リンクサービス(FC-LS)、2007年7月、表148。

ANSI INCITS 418-2006, Fibre Channel - Switch Fabric - 4 (FC-SW-4), December 2006, Section 6.1.3."

ANSIは418-2006、ファイバーチャネル - スイッチファブリック-4(FC-SW-4)、2006年12月、セクション6.1.3。 "

    ::= { t11FcRscnNotifyControlEntry 7 }
        

-- Notifications

- 通知

t11FcRscnElsRejectReqNotify NOTIFICATION-TYPE OBJECTS { t11FcRscnRejectedRequestString, t11FcRscnRejectedRequestSource, t11FcRscnRejectReasonCode, t11FcRscnRejectReasonCodeExp, t11FcRscnRejectReasonVendorCode } STATUS current DESCRIPTION "This notification is generated when a switch rejects an SCR or RSCN.

T11FCRSCNELSREJECTREQNOTIFY NOTIFICITION-TYPEオブジェクト{T11FCRSCNREJECTEDREQUESTSTRING、T11FCRSCNREJECTSOURCE、T11FCRSCNREJECTSOURCE、T11FCRSCNREJECTREASONCODEEXEXP、T11FCRSCNREJEARSTREASONCODEEEXP、T11FCRSCNESTREASON-dectsed dection desction desction dection desction desction 。

           The value of t11FcRscnRejectedRequestString indicates the
           binary content of the rejected request if available, or
           the zero-length string otherwise.  The source of the
           rejected request is given by t11FcRscnRejectedRequestSource,
           and the reason for rejection is given by the values of
           t11FcRscnRejectReasonCode, t11FcRscnRejectReasonCodeExp
           and t11FcRscnRejectReasonVendorCode."
    ::= { t11FcRscnNotifications 1 }
        

t11FcRscnIlsRejectReqNotify NOTIFICATION-TYPE OBJECTS { t11FcRscnRejectedRequestString, t11FcRscnRejectedRequestSource, t11FcRscnRejectReasonCode, t11FcRscnRejectReasonCodeExp, t11FcRscnRejectReasonVendorCode } STATUS current DESCRIPTION "This notification is generated when a switch rejects an SW_RSCN.

t11fcrscnilsRejectReqNotify通知型オブジェクト{t11fcrscnrejectedRequestString、t11fcrscnrejededRequestSource、t11fcrscnrejectsource、t11fcrscnrejectsourcedecode、t11fcrscnrejectReasoncodeeexp、t11fcrscnectrscnjectrscnjectrscnjectrscnectrscnectrscnedはN.

           The value of t11FcRscnRejectedRequestString indicates the
           binary content of the rejected request if available, or
           the zero-length string otherwise.  The source of the
           rejected request is given by t11FcRscnRejectedRequestSource,
           and the reason for rejection is given by the values of
           t11FcRscnRejectReasonCode, t11FcRscnRejectReasonCodeExp
           and t11FcRscnRejectReasonVendorCode."
    ::= { t11FcRscnNotifications 2 }
        
-- Conformance
t11FcRscnCompliances OBJECT IDENTIFIER ::= { t11FcRscnConformance 1 }
t11FcRscnGroups      OBJECT IDENTIFIER ::= { t11FcRscnConformance 2 }
t11FcRscnCompliance MODULE-COMPLIANCE
    STATUS    current
    DESCRIPTION
           "The compliance statement for entities that implement
           this MIB."
    MODULE
        MANDATORY-GROUPS { t11FcRscnRegistrationGroup,
                           t11FcRscnNotifyControlGroup,
                           t11FcRscnNotifyGroup }
        

GROUP t11FcRscnStatsGroup DESCRIPTION "These counters, containing RSCN-related statistics, are mandatory only for those systems that count such events."

グループT11FCRSCNSTATSGROUP説明「RSCN関連の統計を含むこれらのカウンターは、そのようなイベントをカウントするシステムにのみ必須です。」

OBJECT t11FcRscnIlsRejectNotifyEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required."

オブジェクトT11FCRSCNILSREJECTNOTIFYENABLE MIN-ACCESS読み取り専用説明「書き込みアクセスは不要です。」

OBJECT t11FcRscnElsRejectNotifyEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required."

オブジェクトT11FCRSCNELSREJECTNOTIFYENABLE MIN-ACCESS読み取り専用説明「書き込みアクセスは不要です。」

    ::= { t11FcRscnCompliances 1 }
        

-- Units of conformance

- 適合ユニット

t11FcRscnRegistrationGroup  OBJECT-GROUP
    OBJECTS { t11FcRscnRegType }
    STATUS  current
    DESCRIPTION
           "A collection of objects for monitoring RSCN
           registrations."
    ::= { t11FcRscnGroups 1 }
        
t11FcRscnStatsGroup   OBJECT-GROUP
    OBJECTS { t11FcRscnInScrs,
              t11FcRscnInRscns,
              t11FcRscnOutRscns,
              t11FcRscnInSwRscns,
              t11FcRscnOutSwRscns,
              t11FcRscnScrRejects,
              t11FcRscnRscnRejects,
              t11FcRscnSwRscnRejects,
              t11FcRscnInUnspecifiedRscns,
              t11FcRscnOutUnspecifiedRscns,
              t11FcRscnInChangedAttribRscns,
              t11FcRscnOutChangedAttribRscns,
              t11FcRscnInChangedServiceRscns,
              t11FcRscnOutChangedServiceRscns,
              t11FcRscnInChangedSwitchRscns,
              t11FcRscnOutChangedSwitchRscns,
              t11FcRscnInRemovedRscns,
              t11FcRscnOutRemovedRscns
            }
    STATUS  current
    DESCRIPTION
           "A collection of objects for collecting RSCN-related
           statistics."
    ::= { t11FcRscnGroups 2 }
        
t11FcRscnNotifyControlGroup  OBJECT-GROUP
    OBJECTS { t11FcRscnIlsRejectNotifyEnable,
              t11FcRscnElsRejectNotifyEnable,
              t11FcRscnRejectedRequestString,
              t11FcRscnRejectedRequestSource,
              t11FcRscnRejectReasonCode,
              t11FcRscnRejectReasonCodeExp,
              t11FcRscnRejectReasonVendorCode
            }
    STATUS  current
    DESCRIPTION
           "A collection of notification control and
           notification information objects."
    ::= { t11FcRscnGroups 3 }
        
t11FcRscnNotifyGroup   NOTIFICATION-GROUP
    NOTIFICATIONS { t11FcRscnIlsRejectReqNotify,
                    t11FcRscnElsRejectReqNotify
                  }
    STATUS        current
    DESCRIPTION
           "A collection of notifications for monitoring
           ILS and ELS rejections by the RSCN module."
    ::= { t11FcRscnGroups 4 }
        

END

終わり

7. IANA Considerations
7. IANAの考慮事項

IANA has assigned a MIB OID for the T11-FC-RSCN-MIB module under the appropriate subtree.

IANAは、適切なサブツリーの下でT11-FC-RSCN-MIBモジュールにMIB OIDを割り当てました。

8. Security Considerations
8. セキュリティに関する考慮事項

There are a number of management objects defined in this MIB module with a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. These objects and their sensitivity/vulnerability are:

このMIBモジュールには、読み取りワイトおよび/またはread-Createの最大アクセス句を備えた管理オブジェクトが多数あります。このようなオブジェクトは、一部のネットワーク環境で敏感または脆弱と見なされる場合があります。適切な保護なしの非セキュア環境でのセット操作のサポートは、ネットワーク操作に悪影響を与える可能性があります。これらのオブジェクトとその感度/脆弱性は次のとおりです。

t11FcRscnIlsRejectNotifyEnable t11FcRscnElsRejectNotifyEnable -- ability to enable/disable a notification; these object, if misconfigured, would either generate unwanted notifications or suppress wanted notifications.

t11fcrscnilsRejectNotifyEnable T11FCRSCNELSREJECTNOTIFYENABLE-通知を有効/無効にする機能。これらのオブジェクトは、誤って構成されている場合、不要な通知を生成するか、必要な通知を抑制します。

Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may also be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability:

このMIBモジュールの読み取り可能なオブジェクトの一部(つまり、アクセスできないこと以外の最大アクセスを備えたオブジェクト)も、一部のネットワーク環境で敏感または脆弱であると見なされる場合があります。したがって、これらのオブジェクトへのアクセスを取得および/または通知することさえ制御し、SNMPを介してネットワーク上に送信するときにこれらのオブジェクトの値を暗号化することも重要です。これらはテーブルとオブジェクトであり、その感度/脆弱性です。

t11FcRscnRegTable -- contains a list of Nx_Ports that are currently registered to received RSCNs.

T11FCRSCNREGTABLE-現在受信したRSCNに登録されているNX_PORTSのリストが含まれています。

t11FcRscnStatsTable -- contains RSCN-related statistics.

T11FCRSCNSTATSTABLE- RSCN関連の統計が含まれています。

t11FcRscnNotifyControlTable -- contains control and logging information for notifications that are concerned with the rejection of RSCN-related requests.

T11FCRSCNOTIFYCONTROLTABLE- RSCN関連の要求の拒否に関係する通知の制御情報とロギング情報が含まれています。

SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module.

SNMPV3以前のSNMPバージョンには、適切なセキュリティは含まれていませんでした。ネットワーク自体が(たとえばIPSECを使用して)安全である場合でも、それでもセキュアネットワーク上の誰がアクセス/セット/セット(読み取り/変更/作成/削除/削除)を制御することはできません。MIBモジュール。

It is RECOMMENDED that implementors consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy).

実装者は、SNMPV3暗号化メカニズム(認証とプライバシー用)の完全なサポートを含む、SNMPV3フレームワーク([RFC3410]、セクション8を参照)で提供されるセキュリティ機能を考慮することをお勧めします(認証とプライバシー)。

Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.

さらに、SNMPV3より前のSNMPバージョンの展開は推奨されません。代わりに、SNMPV3を展開し、暗号化セキュリティを有効にすることをお勧めします。その場合、このMIBモジュールのインスタンスへのアクセスを提供するSNMPエンティティが、実際に取得または設定する正当な権利を持つプリンシパル(ユーザー)にのみオブジェクトにアクセスできるように適切に構成されていることを保証するのは、顧客/オペレーターの責任です(変更を変更します(変更)/作成/削除)それら。

9. Acknowledgements
9. 謝辞

This document was originally developed and approved by the INCITS Task Group T11.5 (http://www.t11.org) as the SM-RSCNM project. We wish to acknowledge the many contributions and comments from the INCITS Technical Committee T11, especially from the following:

このドキュメントは、もともとSM-RSCNMプロジェクトとしてIncitsタスクグループT11.5(http://www.t11.org)によって開発および承認されました。特に以下から、Incits Technical Committee T11からの多くの貢献とコメントを認めたいと思います。

T11 Chair: Robert Snively, Brocade T11 Vice Chair: Claudio DeSanti, Cisco Systems T11.5 Chair: Roger Cummings, Symantec T11.5 Vice Chair: Scott Kipp, McData and T11.5 members.

T11議長:ロバート・スナイバイ、ブロケードT11副議長:Claudio Desanti、Cisco Systems T11.5議長:Roger Cummings、Symantec T11.5副議長:Scott Kipp、McData、T11.5メンバー。

The document was subsequently a work item of the IETF's IMSS Working Group, chaired by David Black (EMC Corporation). We thank Bert Wijnen (Lucent Technologies) for his thorough review of the document. We also wish to acknowledge Dan Romascanu (Avaya), the IETF Area Director, for his comments and assistance.

その後、この文書は、David Black(EMC Corporation)が議長を務めるIETFのIMSSワーキンググループの作業項目でした。ドキュメントの徹底的なレビューをしてくれたBert Wijnen(Lucent Technologies)に感謝します。また、IETFエリアディレクターであるダンロマスカヌ(アバイア)にコメントと支援を認めたいと思います。

10. Normative References
10. 引用文献

[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.

[RFC2578] McCloghrie、K.、Perkins、D.、Schoenwaelder、J.、Case、J.、Rose、M。、およびS. Waldbusser、「管理情報の構造バージョン2(SMIV2)、STD 58、RFC 2578、1999年4月。

[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.

[RFC2579] McCloghrie、K.、Perkins、D.、Schoenwaelder、J.、Case、J.、Rose、M。、およびS. Waldbusser、「SMIV2のテキストコンベンション」、STD 58、RFC 2579、1999年4月。

[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M. and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.

[RFC2580] McCloghrie、K.、Perkins、D.、Schoenwaelder、J.、Case、J.、Rose、M。、およびS. Waldbusser、「Smiv2の適合ステートメント」、STD 58、RFC 2580、1999年4月。

[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 58, RFC 3411, December 2002.

[RFC3411] Harrington、D.、Presuhn、R。、およびB. Wijnen、「単純なネットワーク管理プロトコル(SNMP)管理フレームワークを説明するためのアーキテクチャ」、STD 58、RFC 3411、2002年12月。

[IF-MIB] McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB", RFC 2863, June 2000.

[if-mib] McCloghrie、K。およびF. Kastenholz、「The Interfaces Group MIB」、RFC 2863、2000年6月。

[RFC4044] McCloghrie, K., "Fibre Channel Management MIB", RFC 4044, May 2005.

[RFC4044] McCloghrie、K。、「ファイバーチャネル管理MIB」、RFC 4044、2005年5月。

[RFC4438] DeSanti, C., Gaonkar, V., Vivek, H.K., McCloghrie, K., and S. Gai, "Fibre Channel Name Server MIB", RFC 4438, March 2006.

[RFC4438] Desanti、C.、Gaonkar、V.、Vivek、H.K.、McCloghrie、K。、およびS. Gai、「Fiber Channel Name Server MIB」、RFC 4438、2006年3月。

[RFC4439] DeSanti, C., Gaonkar, V., McCloghrie, K., and S. Gai, "Fibre Channel Fabric Address Manager MIB", RFC 4439, March 2006.

[RFC4439] Desanti、C.、Gaonkar、V.、McCloghrie、K。、およびS. Gai、「ファイバーチャネルファブリックアドレスマネージャーMIB」、RFC 4439、2006年3月。

[FC-SW-4] "Fibre Channel - Switch Fabric - 4 (FC-SW-4)", ANSI INCITS 418-2006, http://www.t11.org/t11/stat.nsf/upnum/1674-d, December 2006.

[FC-SW-4]「ファイバーチャネル-Switch Fabric-4(FC-SW-4)」、ANSIは418-2006、http://www.t11.org/t11/stat.nsf/upnum/1674-D、2006年12月。

[FC-FS] "Fibre Channel - Framing and Signaling (FC-FS)", ANSI INCITS 373-2003, http://www.t11.org/t11/stat.nsf/upnum/1331-d, April 2003.

[FC-FS]「ファイバーチャネル - フレーミングとシグナル伝達(FC-FS)」、ANSIは373-2003、http://www.t11.org/t11/stat.nsf/upnum/1331-d、2003年4月。

[FC-LS] "Fibre Channel - Link Services (FC-LS)", ANSI INCITS 433-2007, http://www.t11.org/t11/stat.nsf/upnum/1620-d, July 2007.

[FC-LS]「ファイバーチャネル - リンクサービス(FC-LS)」、ANSIは433-2007、http://www.t11.org/t11/stat.nsf/upnum/1620-d、2007年7月に挿入します。

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.

[RFC2119] Bradner、S。、「要件レベルを示すためにRFCで使用するためのキーワード」、BCP 14、RFC 2119、1997年3月。

11. Informative References
11. 参考引用

[RFC2741] Daniele, M., Wijnen, B., Ellison, M., and D. Francisco, "Agent Extensibility (AgentX) Protocol Version 1", RFC 2741, January 2000.

[RFC2741] Daniele、M.、Wijnen、B.、Ellison、M。、およびD. Francisco、「Agent Extensibility(AgentX)プロトコルバージョン1」、RFC 2741、2000年1月。

[RFC2837] Teow, K., "Definitions of Managed Objects for the Fabric Element in Fibre Channel Standard", RFC 2837, May 2000.

[RFC2837] Teow、K。、「ファイバーチャネル標準のファブリック要素の管理されたオブジェクトの定義」、RFC 2837、2000年5月。

[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, December 2002.

[RFC3410] Case、J.、Mundy、R.、Partain、D。、およびB. Stewart、「インターネット標準管理フレームワークの紹介と適用声明」、RFC 3410、2002年12月。

Authors' Addresses

著者のアドレス

Claudio DeSanti Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA Phone: +1 408 853-9172 EMail: cds@cisco.com

Claudio Desanti Cisco Systems、Inc。170 West Tasman Drive San Jose、CA 95134 USA電話:1 408 853-9172メール:cds@cisco.com

H.K. Vivek Cisco Systems, Inc. 71 Millers Rd Bangalore, India Phone: +91 80 2289933x5117 EMail: hvivek@cisco.com

H.K.Vivek Cisco Systems、Inc。71 Millers Rd Bangalore、India電話:91 80 228993x5117メール:hvivek@cisco.com

Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 USA Phone: +1 408 526-5260 EMail: kzm@cisco.com

Keith McCloghrie Cisco Systems、Inc。170 West Tasman Drive San Jose、CA 95134 USA電話:1 408 526-5260メール:kzm@cisco.com

Silvano Gai Nuova Systems 3 West Plumeria Drive San Jose, CA 95134 Phone: +1 408 387-6123 EMail: sgai@nuovasystems.com

Silvano Gai Nuova Systems 3 West Plumeria Drive San Jose、CA 95134電話:1 408 387-6123メール:sgai@nuovasystems.com

Full Copyright Statement

完全な著作権声明

Copyright (C) The IETF Trust (2007).

著作権(c)The IETF Trust(2007)。

This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.

この文書は、BCP 78に含まれる権利、ライセンス、および制限の対象となり、そこに記載されている場合を除き、著者はすべての権利を保持しています。

This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

このドキュメントとここに含まれる情報は、「現状のまま」に基づいて提供され、貢献者、彼/彼女が代表する組織(もしあれば)、インターネット協会、IETFトラスト、インターネットエンジニアリングタスクフォースがすべてを否認します。明示的または黙示的な保証。ここでの情報の使用は、特定の目的に対する商品性または適合性の権利または暗黙の保証を侵害しないという保証を含むがこれらに限定されない。

Intellectual Property

知的財産

The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.

IETFは、知的財産権またはその他の権利の有効性または範囲に関して、本書に記載されている技術の実装または使用、またはそのような権利に基づくライセンスに基づくライセンスの範囲に関連すると主張される可能性のある他の権利に関しては、立場を取得しません。利用可能になります。また、そのような権利を特定するために独立した努力をしたことも表明していません。RFCドキュメントの権利に関する手順に関する情報は、BCP 78およびBCP 79に記載されています。

Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.

IETF事務局に行われたIPR開示のコピーと、利用可能にするライセンスの保証、またはこの仕様の実装者またはユーザーによるそのような独自の権利の使用のための一般的なライセンスまたは許可を取得するための試みの結果を取得できます。http://www.ietf.org/iprのIETFオンラインIPRリポジトリから。

The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.

IETFは、関心のある当事者に、著作権、特許、または特許出願、またはこの基準を実装するために必要なテクノロジーをカバーする可能性のあるその他の独自の権利を注意深く招待します。ietf-ipr@ietf.orgのIETFへの情報をお問い合わせください。